Page 1 of 6 High Pressure dsorption ryer, 0040 to 0125, 0050 to 0155 High pressure adsorption dryer, heatless regenerating, including pre-and afterfilter Product description: ompressed air is lead through the inlet of the dryer () into the prefilter (3) t this stage, the air is cleaned from particles and condensate The condensate is removed via a hand operated condensate drain (10) or optional via an electronic condensate drain (11) Via the shuttle valve (9) the air is lead into the absorber vessel (1), in which the air is dried to the required dryness level (pressure dewpoint) Thereafter the air flows through the upper non-return valve (9) and an afterfilter (4) which retains eventually accruing abrasion of desiccant Via the systems outlet () the clean and dry air reaches the user's air net uring one vessel is in operation, the water previously accumulated in the other adsorber is removed (regeneration phase) or this process a partial stream of already dried air is lead through a nozzle (7) and brought down to atmospheric pressure or regeneration, purge air is lead over the desiccant bed and then released into the atmosphere via a pneumatically operated valve (5) and a silencer (6) High pressure adsorption dryer 0040-0125 1 9 2 4 ption Steuerluft-ruckminderer 13 ption ontrol air-pressure reducer Steuerluft 131 132 ontrol air 2 7 2 1 1 121 MT MIH 02 MISH 01 122 2 2 123 ption automatischer Kondensatableiter ption automatic condensate drain 3 11 10 9 5 5 6 6 tmosphäre atmosphere 12 ption Superplus Ultraconomy inkl ption Steuerluft-ruckminderer incl ption ontrol air-pressure reducer Ko Technical alterations reserved (R05/ 2016/07/19) onaldson iltration eutschland GmbH Industrial iltration Solutions üssingstraße 1-4271 Haan Telefon +49/2129/569-0 Telefax +49/2129/569-100
Page 2 of 6 High Pressure dsorption ryer, 0260 to 1130, 0310 to 1200 High pressure adsorption dryer, heatless regenerating, including pre-and afterfilter Product description: ompressed air is lead through the inlet of the dryer () into the prefilter (3) t this stage, the air is cleaned from particles and condensate The condensate is removed via a hand operated condensate drain (10) or optional via an electronic condensate drain (11) Via the pneumatically operated valve (V3, V4) in the valve block the air is lead into the absorber vessel (1), in which the air is dried to the required dryness level (pressure dewpoint) Thereafter the air flows through the upper non-return valve (9) and an afterfilter (4) which retains eventually accruing abrasion of desiccant Via the systems outlet () the clean and dry air reaches the user's air net uring one vessel is in operation, the water previously accumulated in the other adsorber is removed (regeneration phase) or this process a partial stream of already dried air is lead through a nozzle (7) and brought down to atmospheric pressure or regeneration, purge air is lead over the desiccant bed and then released into the atmosphere via a pneumatically operated valve (V1, V2) and a silencer (6) High pressure adsorption dryer 0260-1130 1 9 9 2 4 13 ption Steuerluft-ruckminderer ption ontrol air-pressure reducer 131 132 Steuerluft ontrol air 7 2 2 1 1 121 MT MIH 02 MISH 01 122 2 2 123 3 10 V1 V3 V5 V4 V2 12 tmosphäre atmosphere ption Superplus Ultraconomy inkl ption Steuerluft-ruckminderer incl ption ontrol air-pressure reducer ption automatischer Kondensatableiter ption automatic condensate drain 11 Ko 6 6 5
Page 3 of 6, 0040-1130 Volume flow in * Regeneration air losses Volume flow out (min) Pressure loss initial incl filters mbar Pre-filter (afterfilter) M (YG) 0040 40 262 3669 100 03/05 000 0 515 7351 170 04/20 0125 125 67 11652 390 04/20 0260 260 152 24092 150 05/20 0500 500 3049 46171 40 05/25 0770 770 4649 7115 990 07/30 1130 1130 6602 104720 900 07/30 * related to 1 bar (abs) and 20 at intake of compressor and 7 bar system pressure and 35 inlet temperature into dryer Product description omplete purification package with heatless adsorption dryer which works on the basis of pressure swing adsorption, pre-, afterfilter and hand operated drain, electronic condensate drain optionally Medium: ompressed air/ nitrogen Pressure dewpoint: -40 at 100% load eatures omplete purification package including pre-, afterfilter and hand operated drain (optionally electronic condensate drain) ptimally dimensioned filters Indication of operating status (adsorption, regeneration, pressurizing, service, alarm) via L display Intermittend operation as standard Use of pneumatically controlled seat valves option package available enefits Turnkey-system; all components from one hand, technically perfectly matched to each other Safe separation of particle and aerosols (on adherence to the specified parameters), large filter surface causes low differential pressure of the unit, thereby low operating cost High operating safety, all operating status can be easily detected at any time oupling with the compressor with central applications possible, thus savings of regeneration air and operating cost High operating safety, low pressure losses, low operating and maintenance costs lexibility in application; option package for economic and safe system integration in the compressed air network - dew point-dependent capacity control - electronic condensate drain - control air supply - starting valve perating pressure: min 17 bar (g), max 25 bar (g) Medium temperature: min 5, max 55 mbient: min 4, max 50 Power supply: 230 V/ 50-60Hz Power consumtion: approx 40 W Pressure vessel - design, manufacture, testing dsorber and filter acc to 2014/6/U eclaration of conformity: acc to 97/23/ Sizing: Inlet temperature perating pressure (bar) 17 1 19 20 21 22 23 24 25 30 076 077 01 05 09 092 097 105 35 072 073 077 01 05 0 092 096 100 40 056 057 060 063 066 069 072 075 07 45 044 045 047 049 052 054 056 059 061 50 035 035 037 039 041 042 044 046 04 55 027 02 029 031 032 033 035 036 03 xample: V nom = 200, Inlet temperature = 40 perating pressure = 20 bar (ü) Pressure dewpoint = -40 V corr = V nom f 200 = = 063 Selected adsorption dryer: 0500-PN25 3175
Page 4 of 6, 0050-1200 Volume flow in * Regeneration air losses Volume flow out (min) Pressure loss initial incl filters mbar Pre-filter (afterfilter) M (YG) 0050 50 272 4644 100 03/05 0095 95 430 97 150 04/20 0155 155 645 1474 510 04/20 0310 310 1420 2930 140 05/20 0515 515 2159 4973 320 05/25 000 00 3073 76470 740 07/30 1200 1200 4637 114653 650 07/30 * ezogen auf 1 bar (abs) und 20 nsaugzustand und 7 bar (ü) und 35 intrittstemperatur Product description: omplete purification package with heatless adsorption dryer which works on the basis of pressure swing adsorption, pre-, afterfilter and hand operated drain, electronic condensate drain optionally Medium: ompressed air/ nitrogen Pressure dewpoint: -40 at 100% load eatures omplete purification package including pre-, afterfilter and hand operated drain (optionally electronic condensate drain ) ptimally dimensioned filters Indication of operating status (adsorption, regeneration, pressurizing, service, alarm) via L display Intermittend operation as standard Use of pneumatically controlled seat valves option package available enefits Turnkey-system; all components from one hand, technically perfectly matched to each other Safe separation of particle and aerosols (on adherence to the specified parameters), large filter surface causes low differential pressure of the unit, thereby low operating cost High operating safety, all operating status can be easily detected at any time oupling with the compressor with central applications possible, thus savings of regeneration air and operating cost High operating safety, low pressure losses, low operating and maintenance costs lexibility in application; option package for economic and safe system integration in the compressed air network - dew point-dependent capacity control - electronic condensate drain - control air supply - starting valve perating pressure: min 26 bar (g), max 40 bar (g) Medium temperature: min 5, max 55 mbient: min 4, max 50 Power supply: 230 V/ 50-60Hz Power consumtion: approx 40 W Pressure vessel - design, manufacture, testing dsorber and filter acc to 97/23/ eclaration of conformity: acc to 2014/6/U Sizing: Inlet temperature perating pressure (bar) 26 2 30 32 34 36 3 40 30 069 075 00 05 091 096 099 105 35 066 071 076 01 06 091 095 100 40 051 055 059 063 067 071 074 07 45 040 043 046 049 052 056 05 061 50 032 034 036 039 041 044 046 04 55 025 027 029 031 033 035 036 03 xample: V nom = 200, Inlet temperature = 40 perating pressure = 34 bar (ü) Pressure dewpoint = -40 V corr = V nom f 200 = = 067 Selected adsorption dryer: 0310-PN40 295
Page 5 of 6, 0040-0125 530 40,5 390 N G 1/4" Ko onnection N 0040 0050 G 1 /4 105 325 410 495 340 260 000 0095 G 1 /2 1175 350 455 540 365 290 0125 0155 G 1 /2 1275 375 505 590 365 315
Page 6 of 6, 0260-1130 Ko G 50 13 N I G 1/4" H onnection N 0260 0310 G 3 /4 1660 900 550 655 40 540 440 60 655 0550 0515 G 1 135 900 550 655 530 600 440 60 670 0770 000 G 1 1 /2 175 900 550 655 55 675 440 60 700 1130 1200 G 1 1 /2 1940 1200 710 05 635 720 600 1160 900 G H I