MP-FILENCO DRYER CROSS SECTION

MP-FILENCO DRYER CROSS SECTION FILTERS A mul ti ple- lay er fi lter disc pack provides fi nal fi ltration to remove particulates down to µm in size. OUTLET Just clean dry air! Water is removed in the desiccant chamber. Different desiccants are offered to meet a variety of needs. INLET Incoming air swirls around a conical structure where water and oil droplets fall into the drain. Scale is broken up. Several drain types are available including electronic or heated drains. GUIDE to ADSORBING FILTERS, DRYERS and CLEAN AIR PACKAGES Port Sizes Product / /8 / / -/ Pages ADSORBING FILTERS BFC70-E9 X X X 0-0 FC80-E9 X X X 0-0 CLEAN AIR PACKAGES Guardsman II X X X 0-07 Series 80 X X X 0- High-fl ow BFDFCD00 X X 08-09 MP-FILENCO DRYER/FILTERS Series X - Series X - Series 8 X - Series 8 X -7 Series X 8-9 Series 8 X 8-9 Master Pneumatic, Inc. 0

MP-FILENCO Dryer/Filters Series Port Size: / Model Shown: CD-DM Many compressed air systems require point-of-use clean ing and drying of the air to supplement a central system. MP- Filenco dryer/fi lter units perform superbly because of their triple-action cleaning process and their ability to reduce the pressure dew point. See the sketch on page 9 for a cross-section view of a typical dryer/fi lter. The fi ltering and drying functions result in super clean, super dry air. Several drain options and choices of des ic cants are available to suit various op er at ing needs. SPECIFICATIONS Ambient/Media Temperature: 0 to F ( to C). Drain: Automatic drain; optional manual or electronic drains. Dessicant: Choice of three. Flow Rate: 7 scfm (. l/s). Fluid Media: Compressed air. : 0 g (0 ) maximum. Consult Master Pneumatic for higher pressure ratings. S The desiccants in MP-Filenco dryer/fi lters have the abil i ty to drop the pres sure dew point thereby preventing the recur rence of wa ter in the air system. They also adsorb sulfur com pounds that form abrasive, gummy varnish or shellac. Three different dessicants are available. CLAY (CD) This is a general purpose desiccant which produces initial dew point depressions of 0 to degrees Fahrenheit. It is effective for re mov ing both wa ter and oil, and requires no air preparation. Life expectancy is up to three months, depending on hu mid i ty, fl ow rate, and frequency of use. CLAY WITH ACTIVATED CARBON (CDC) This desiccant provides a higher degree of air purifi cation than the plain clay desiccant. A layer of ac ti - vat ed carbon produces slightly lower initial dew points, and also provides better removal of noxious gases and oil aerosols. MOLECULAR SIEVE (MS) Highly porous alumina-silicate complexes in this desiccant pro duce exceptionally low pressure dew points, as much as 80 Fahr en heit degrees initially. A dryer/fi lter with this des ic cant must be preceded by a coalescing fi lter. The pres ence of oil in the air will contaminate the molecular sieve ma te ri al and greatly reduce its effi ciency. The co a lesc ing pre-fi lter, of course, should be preceded by a gen er al pur pose fi lter. Master Pneumatic, Inc.

R Last Change Date: Shut off air supply before servicing unit THREE MONTH MAXIMUM PER CHAN (Mark Date with Ink) DIMENSIONS inches (mm) A with Drain A D, D Series No Drain D, D D D7 D8 B Depth 7.0. 0.. 9... (78) () (7) (9) () (7) (89) 0. 0. 0.8 0. 0. CHART 0 g (0. ) scfm 0 l/s 0... 7 REPLACEMENT ELEMENT KITS Description Quantity Kit Number (per case) Clay Desiccant Elements Series......CD-NRE Clay with Activated Carbon Series......CDC-NRE Molecular Sieve Elements Series......MS-NRE Note: Replacement kits include parts for both the older and current designs of fi lter discs. ORDERING INFORMATION Change the letters in the sample model number below to specify the dryer/fi lter you want..0 (7) A WARNING FILENCO WARNING ATTENTION B MP-Filenco Dryer/Filters Series Clay...CD Clay with carbon...cdc Molecular sieve...ms None... Leave Blank Polycarbonate bowl; plastic bowl guard: Manual drain PGM-... D Automatic fl oat drain... D PGA- Metal bowl with sight glass: Manual drain MSM-... D Automatic fl oat drain... D MBA- Air poppet (actuator required); v heated drain;... D temperature controlled Air poppet with v adjustable... D7 cycle heated electronic timer Warrior electronic vac drain... D8 CD - D M W PORT TYPE NPTF threads... Leave Blank BSPP threads... W MOISTURE INDICATOR None...Leave Blank With moisture indicator... M MI7 Master Pneumatic, Inc.

MP-FILENCO Dryer/Filters Series and 8 Port Sizes: /8 and / Many compressed air systems require point-of-use clean ing and drying of the air to supplement a central system. MP- Filenco dryer/fi lter units perform superbly because of their triple-action cleaning process and their ability to reduce the pressure dew point. See the sketch on page 9 for a cross-section view of a typical dryer/fi lter. The fi ltering and drying functions result in super clean, super dry air. Several drain options and choices of des ic cants are available to suit various op er at ing needs. Units have fl anges and front ports for fl ush mounting. Model Shown: CD-DM Model Shown: CD8-DM SPECIFICATIONS Ambient/Media Temperature: 0 to F ( to C). Drain: Automatic drain; optional manual or electronic drains. Dessicant: Choice of three. Fluid Media: Compressed air. : 0 g (0 ) maximum. Consult Master Pneumatic for higher pressure ratings. Mounting: Flanges and front ports for fl ush mounting. S The desiccants in MP-Filenco dryer/fi lters have the abil i ty to drop the pres sure dew point thereby preventing the recur rence of wa ter in the air system. They also adsorb sulfur com pounds that form abrasive, gummy varnish or shellac. Three different desiccants are available. CLAY (CD) This is a general purpose desiccant which produces initial dew point depressions of 0 to degrees Fahrenheit. It is effective for re mov ing both wa ter and oil, and requires no air preparation. Life expectancy is up to three months, depending on hu mid i ty, fl ow rate, and frequency of use. CLAY WITH ACTIVATED CARBON (CDC) This desiccant provides a higher degree of air purifi cation than the plain clay desiccant. A layer of ac ti - vat ed carbon produces slightly lower initial dew points, and also provides better removal of noxious gases and oil aerosols. MOLECULAR SIEVE (MS) Highly porous alumina-silicate complexes in this desiccant pro duce exceptionally low pressure dew points, as much as 80 Fahr en heit degrees initially. A dryer/fi lter with this des ic cant must be preceded by a coalescing fi lter. The pres ence of oil in the air will contaminate the molecular sieve ma te ri al and greatly reduce its effi ciency. The co a lesc ing pre-fi lter, of course, should be preceded by a gen er al pur pose fi lter. Master Pneumatic, Inc.

DIMENSIONS inches (mm) A with Drain A D, D Series No Drain D, D D D7 D8 B Depth 9......0.0 () () () (9) () (0) (7) 8.......0 (78) () () (9) () () (7) CHARTS 0. 0. 0.8 0. 0. 0 g (0. ) scfm 0 8 0 8 l/s 0. 7 8 0. 0. 0.8 0. 0. Series 0 g (0. ) Series 8 REPLACEMENT ELEMENT KITS Description Quantity Kit Number (per case) Clay Desiccant Elements Series......CD-NRE Series 8......CD-8NRE Clay with Activated Carbon Series......CDC-NRE Series 8......CDC-8NRE Molecular Sieve Elements Series......MS-NRE Series 8......MS-8NRE Note: Replacement kits include parts for both the older and current designs of fi lter discs. A B MP-Filenco Dryer/Filter and 8 Series scfm 0 8 0 8 l/s 0 8 0 Clay...... CD Clay with carbon... CDC Molecular sieve... MS SIZE /8 NPTF 8 scfm... - / NPTF 0 scfm... 8- ORDERING INFORMATION Change the letters in the sample model number below to specify the dryer/fi lter you want. CD - D M W PORT TYPE NPTF threads... Leave Blank BSPP threads... W MOISTURE INDICATOR None...Leave Blank With moisture indicator...m (MI7) None...Leave Blank Polycarbonate bowl; plastic bowl guard: Manual drain PGM... D Automatic fl oat drain...d PGA Metal bowl with sight glass: Manual drain MSM... D Automatic fl oat drain... D MBA Air poppet (actuator required); v heated drain; temperature controlled... D Air poppet with v adjustable... D7 cycle heated electronic timer Warrior electronic vac drain... D8 Master Pneumatic, Inc.

MP-FILENCO Dryer/Filters Series 8 Port Size: Many compressed air systems require point-of-use clean ing and drying of the air to supplement a central system. MP- Filenco dryer/fi lter units perform superbly because of their triple-action cleaning process and their ability to reduce the pressure dew point. See the sketch on page 9 for a cross-section view of a typical dryer/fi lter. The fi ltering and drying functions result in super clean, super dry air. Several drain options and choices of des ic cants are available to suit various op er at ing needs. Units have fl anges and front ports for fl ush mounting. Model Shown: CD8-8DM SPECIFICATIONS Ambient/Media Temperature: 0 to F ( to C). Drain: Automatic drain; optional manual or electronic drains. Dessicant: Choice of three. Flow Rate: 70 scfm. Fluid Media: Compressed air. : 0 g (0 ) maximum. Consult Master Pneumatic for higher pressure ratings. Mounting: Flanges and front ports for fl ush mounting. S The desiccants in MP-Filenco dryer/fi lters have the abil i ty to drop the pres sure dew point thereby preventing the recur rence of wa ter in the air system. They also adsorb sulfur com pounds that form abrasive, gummy varnish or shellac. Three different desiccants are available. CLAY (CD) This is a general purpose desiccant which produces initial dew point depressions of 0 to degrees Fahrenheit. It is effective for re mov ing both wa ter and oil, and requires no air preparation. Life expectancy is up to three months, depending on hu mid i ty, fl ow rate, and frequency of use. CLAY WITH ACTIVATED CARBON (CDC) This desiccant provides a higher degree of air purifi cation than the plain clay desiccant. A layer of ac ti - vat ed carbon produces slightly lower initial dew points, and also provides better removal of noxious gases and oil aerosols. MOLECULAR SIEVE (MS) Highly porous alumina-silicate complexes in this desiccant pro duce exceptionally low pressure dew points, as much as 80 Fahr en heit degrees initially. A dryer/fi lter with this des ic cant must be preceded by a coalescing fi lter. The pres ence of oil in the air will contaminate the molecular sieve ma te ri al and greatly reduce its effi ciency. The co a lesc ing pre-fi lter, of course, should be preceded by a gen er al pur pose fi lter. Master Pneumatic, Inc.

DIMENSIONS inches (mm) A with Drain A D, D Series No Drain D, D D D7 D8 B Depth 8 0.8.9.9.0. (08) (0) (78) (0) (8) () () 0. 0. 0.8 0. 0. CHARTS 0 g (0. ) scfm 0 0 0 70 l/s 0 0 0 0 REPLACEMENT ELEMENT KITS Description Quantity Kit Number (per case) Clay Desiccant Elements Series 8......CD-8NRE Clay with Activated Carbon Series 8......CDC-8NRE Molecular Sieve Elements Series 8......MS-8NRE Note: Replacement kits include parts for both the older and current designs of fi lter discs. A B MP-Filenco Dryer/Filter 8 Series ORDERING INFORMATION Change the letters in the sample model number below to specify the dryer/fi lter you want. Clay CD Clay with carbon... CDC Molecular sieve... MS None Remove D Polycarbonate bowl; plastic bowl guard: Manual drain PGM...... D Automatic fl oat drain...... D PGA Metal bowl with sight glass: Manual drain MSM...... D Automatic fl oat drain MBA...... D Air poppet (actuator required);... D v heated drain; temperature controlled Air poppet with v adjustable... D7 cycle heated electronic timer Warrior electronic vac drain... D8 CD 8-8 D M W PORT TYPE NPTF threads... Leave Blank BSPP threads... W MOISTURE INDICATOR None..... Leave Blank With moisture indicator... M MI70 Master Pneumatic, Inc. 7

MP-FILENCO Dryer/Filters Series and 8 Port Sizes: -/ and Many compressed air systems require point-of-use clean ing and drying of the air to supplement a central system. MP- Filenco dryer/fi lter units perform superbly because of their triple-action cleaning process and their ability to reduce the pressure dew point. See the sketch on page 9 for a cross-section view of a typical dryer/fi lter. The fi ltering and drying functions result in super clean, super dry air. Several drain options and choices of des ic cants are available to suit various op er at ing needs. Units have fl anges and front ports for fl ush mounting. Model Shown: CD-DM Model Shown: CD8-DM SPECIFICATIONS Ambient/Media Temperature: 0 to F ( to C). Drain: Automatic drain; optional manual or electronic drains. Dessicant: Choice of three. Fluid Media: Compressed air. : 0 g (0 ) maximum. Consult Master Pneumatic for higher pressure ratings. Mounting: Flanges and front ports for fl ush mounting. S The desiccants in MP-Filenco dryer/fi lters have the abil i ty to drop the pres sure dew point thereby preventing the recur rence of wa ter in the air system. They also adsorb sulfur com pounds that form abrasive, gummy varnish or shellac. Three different desiccants are available. CLAY (CD) This is a general purpose desiccant which produces initial dew point depressions of 0 to degrees Fahrenheit. It is effective for re mov ing both wa ter and oil, and requires no air preparation. Life expectancy is up to three months, depending on hu mid i ty, fl ow rate, and frequency of use. CLAY WITH ACTIVATED CARBON (CDC) This desiccant provides a higher degree of air purifi cation than the plain clay desiccant. A layer of ac ti - vat ed carbon produces slightly lower initial dew points, and also provides better removal of noxious gases and oil aerosols. MOLECULAR SIEVE (MS) Highly porous alumina-silicate complexes in this desiccant pro duce exceptionally low pressure dew points, as much as 80 Fahr en heit degrees initially. A dryer/fi lter with this des ic cant must be preceded by a coalescing fi lter. The pres ence of oil in the air will contaminate the molecular sieve ma te ri al and greatly reduce its effi ciency. The co a lesc ing pre-fi lter, of course, should be preceded by a gen er al pur pose fi lter. 8 Master Pneumatic, Inc.

DIMENSIONS inches (mm) A with Drain A D, D Series No Drain D, D D D7 D8 B Depth...0.. 8. 8.0 (0) () (0) (8) () () (0) 8 8 7. 9. 7. 0 0. (8) (9) (9) (007) (9) () (7) 0. 0. 0.8 0. 0. 0 g (0. ) scfm 0 0 0 7 90 0 0 0 l/s 0 0 0 70 0. 0. 0.8 0. 0. CHARTS Series 0 g (0. ) Series 8 scfm 0 0 00 0 0 0 l/s 0 0 7 00 0 7 Clay...CD Clay with carbon...cdc Molecular sieve...ms SIZE -/ NPTF 0 scfm...- NPTF 00 scfm...8- CD - D M W REPLACEMENT ELEMENT KITS Description Quantity Kit Number (per case) Clay Desiccant Elements Series......CD-NRE Series 8......CD-8NRE Clay with Activated Carbon Series......CDC-NRE Series 8......CDC-8NRE Molecular Sieve Elements Series......MS-NRE Series 8......MS-8NRE Note: Replacement kits include parts for both the older and current designs of fi lter discs. ORDERING INFORMATION Change the letters in the sample model number below to specify the dryer/fi lter you want. PORT TYPE NPTF threads... Leave Blank BSPP threads... W MOISTURE INDICATOR None...Leave Blank With moisture indicator...m MI70 None...Leave Blank Polycarbonate bowl; plastic bowl guard: Manual drain PGM... D Automatic fl oat drain... D PGA Metal bowl with sight glass: Manual drain MSM... D Automatic fl oat drain... D MBA Air poppet (actuator required);... D v heated drain; temperature controlled Air poppet with v adjustable... D7 cycle heated electronic timer Warrior electronic vac drain... D8 A B MP-Filenco Dryer/Filter and 8 Series Master Pneumatic, Inc. 9