PA - 777 / PA-PRO PORTABLE AIR PURIFIER Instruction Manual PA-777 Model Shown PA-PRO Model Shown Residential / Light Commercial Air Purification Unit Thank you for selecting PetAirapy for your pets, your family and your home Please keep the instruction manual for reference
Finally, an innovative, natural solution to your pet s allergies Breathe easy with your new PetAirapy PA-777 / PA-PRO unit PA-PRO Model Shown We know just how important the comfort and health of your pets and family are. Our air purification units have been carefully and meticulously designed to keep pets and people more comfortable - reducing allergens that cause asthma, colds and respiratory infections. Treatment that lasts a lifetime, not just a season! PA-777 / PA-PRO Features: o o o o o o o Targets allergens and other microorganisms including mold, viruses and bacteria. Protect your pets and family from odor, environmental allergens and illnesses. SIX LAYERS of purifying power; UVC light, ULPA (Super HEPA) Filter, Aluminum Electric Static Plasma Filter, Photo Catalyst Filter, Activated Carbon Filter, Anions (Ions). Kills, disinfects and filters up to 1,000 square feet UVC light has a robust 8000 hour lifespan Particle sensor allows the unit to be self-sufficient (PA-PRO model only) Color LED alerts you of your air quality with a red, purple or blue light Stylish, sleek, portable and easy to clean and maintain
PA-777 / PA-PRO Portable Air Purifier 4-5 4 5 Diagram of the filters and UVC Light Technical innovation for convenience Technical innovation for convenience Diagram of the outer unit Diagram of the inner unit Sensor switch settings ULPA or Aluminum Electric Static Plasma Filter RESET button Operating while in sensor mode Maintenance and cleaning instructions Cleaning the carbon fiber of ion generator Cleaning the Aluminum Electric Static Plasma Filter Cleaning the ULPA Filter Cleaning and replacement of the UVC light 6 6 6 6 7 7 7 8 8 8 9 9-10 9 9 9 10 10 11-12 11 11 11 12 12 12 13-15 13 14 15 15 16 Technical parameters of the UVC light Technical parameters of the Aluminum Electric Static Plasma Filter Technical parameters of the ULPA Filter Specifications of the air sensor 17-18 17 17 17 18 18 18 PA - 777 / PA PRO
Misusing or mishandling may cause death Misusing or mishandling may cause injury DO NOT DISASSEMBLE, REPAIR OR RECONSTRUCT THIS UNIT. It may cause unit damage or fire. PLUG THE POWER CORD INTO THE ELECTRICAL OUTLET COMPLETELY. Failure to do so may cause fire or electrical shock. Do not use if the power cord or plug is damaged. Do not plug the power cord into a loose socket. DANGER DO NOT USE ON AN OVERLOADED SOCKET OR WIRING CONNECTOR. ENSURE YOU ARE USING THE RATED VOLTAGE. Failure to do so may cause fire or electrical shock. CLEAN THE POWER CORD AND PLUG REGULARLY. If there is dust or debris on the plug, it may weaken the insulation or even cause fire. DANGER DO NOT INSERT ANY METAL OR FOREIGN OBJECTS INTO THE UNIT DANGER DO NOT TOUCH THE POWER CORD OR PLUG WITH WET HANDS. It may cause electrical shock. Periodically inspect the plug for dust or debris and clean it with a soft, dry cloth. Unplug the unit if it will be unused for an extended period of time. DANGER It may cause injury or electrical shock. DO NOT ATTEMPT TO REPAIR A DAMAGED POWER CORD OR PLUG. DO NOT ATTEMPT TO REPAIR A DAMAGED UNIT. It may cause a short circuit, injury, electrical shock or fire. UNPLUG THE UNIT BEFORE DISASSEMBLY, REASSEMBLY, CLEANING OR MAINTENANCE. Failure to do so may cause injury or electrical shock. DANGER THE SURFACE OF THE UNIT SHOULD NEVER COME IN CONTACT WITH WATER It may cause a short circuit, injury or electrical shock. PA - 777 / PA PRO
DANGER DO NOT USE IN A HIGH MOISTURE AREA. DANGER DO NOT USE THIS UNIT AS AN EXHAUST FAN FOR SMOKE. THIS UNIT IS NOT MEANT TO BE USED AS A VENTILATOR. It may cause injury, electrical shock or fire. It may cause injury DANGER DO NOT USE THIS UNIT IN AN ATTEMPT TO CLEAR SMOKE CAUSED BY FIRE. THIS UNIT IS NOT MEANT TO BE USED AS A VENTILATOR. It may cause Carbon Monoxide poisoning. DANGER DO NOT TURN ON THE UNIT DURING OR IMMEDIATELY AFTER USING AN INSECTICIDE IN THE ROOM. The insecticide may be stored in the unit and will be expelled into the air during normal use which is harmful to your health. Please ventilate the room completely after having used insecticide before turning on the unit. KEEP ALL FLAMES, HOT ASH, CANDLES, FLAMMABLE MATERIALS AND COMBUSTIBLE MATERIALS AWAY FROM THE UNIT. DANGER KEEP THE UNIT AWAY FROM ALCOHOL, AEROSOLS OR INSECTICIDE. It may cause unit surface damage, short circuit, electric shock, injury or fire. ALWAYS UNPLUG THE UNIT USING THE PLUG INSTEAD OF THE POWER CORD. NEVER TUG OR PULL ON THE POWER CORD TO UNPLUG THE UNIT FROM THE ELECTRICAL OUTLET. It may cause damage to the power cord, short circuit, electrical shock or fire. Please remove the plug from the electrical outlet if there are any conditions as below: If all buttons on the unit do not work If you experience loss of power due to brownout or blackout If you notice any strange odor, noise or vibration coming from the unit Any other abnormality or failure If the power cord is damaged, please send to a service center or technician for repairing. Do not change or repair it yourself. PA - 777 / PA PRO
ALUMINUM ELECTRIC STATIC PLASMA FILTER: Its purification for dust is more than 99.9%. It will effectively absorb dust in an area up to 229 square feet. ANION (ION): More than 8 million ions are generated per second creating a fresh, clean environment equal to a 160,000 square foot forest. (Optional on/off feature). UVC LIGHT: Its sterilization rate is more than 99.2%, killing a variety of bacteria, mold, viruses and other microorganisms. ULPA (SUPER HEPA) FILTER: Absorbs particulate down to 0.1 micron like pollen, drifting dust and germs with purification efficiency of 99.999%. PHOTO CATALYST FILTER: Restrains the activation of bacteria and viruses with efficiency equal to an environment of 54,000 F. ACTIVATED CARBON: Absorbs and decomposes harmful gasses, odors and volatile organic compounds (VOC). Diagram of the filters and UVC light UVC Light (2 lights in one unit) ULPA + Activated Carbon + Photo Catalyst Filter Aluminum Electric Static Plasma Filter (with 4 carbon fiber heads which can be cleaned) PA - 777 / PA PRO
Six stages of purification power UVC LIGHTS: Kill a variety of bacteria, mold, viruses and other microorganisms that can trigger allergic reactions and respiratory illnesses and infections. It effectively kills over 99% of germs. (Optional on/off feature). ULPA MICRO ALLERGEN FILTER (SUPER HEPA): Captures particles such as dust mites, dander and pollen and keeps them from being circulated into the air that your family and pets breathe. This powerful filter filters out particles as small as 0.1 microns with 99.999% efficiency, making it more effective than even a HEPA filter. ALUMINUM ELECTRONIC STATIC PLASMA FILTER: Collects the dust in the air around you with electric plasma technology that is 99.9% effective. You ll have cleaner air and less dust on your furniture. Aluminum filter is washable and reusable. (Optional on/off feature). PHOTO CATALYST FILTER: Restrains and inactivates reproduction of microorganisms such as mold, bacteria and viruses with TiO2. ACTIVATED CARBON FILTER: Absorbs odors, gas, smoke, fumes and VOC s for cleaner, fresher air. You ll be able to tell the difference with every breath! ANION (IONS): Generates more than 8 million negative ions per second, creating an environment as fresh and clean as a 160,000 sq. ft. forest! (Optional on/off feature). Technical innovation for convenience AIR POLLUTION SENSORS: There are odor sensors and particle sensors* in the unit which will control its working status when the sensors detect pollutants in the air such as dust, odor and smoke as well as a multitude of many others. AIR QUALITY LED: It notifies you of the pollution level of the air according to the color of the LED: Red (highly polluted), Purple (semi-polluted), Blue (non-polluted). EXTENDED FILTER LIFE: The Aluminum Electric Static Plasma Filter can reduce large particles in the air up to 99%, helping to extend the life of the ULPA and Activated Carbon Filters. AUTO FILTER CLEANING/REPLACEMENT LEDS: The auto filter LEDs notify you when the ULPA Filter, Aluminum Electric Static Plasma Filter and the UVC Light need cleaning or replacement. An audible alarm will also sound when cleaning or replacement is necessary. AUTO MODE: Controlled by the built-in Samsung intelligent chip (IC), the unit will automatically alternate in 20 minutes on / 40 minutes off cycles for ultimate convenience. AUDIO AND VISUAL SIMPLICITY: ON/OFF sound settings and LED display technology maximize convenience and operating simplicity. * Model PA-777 has odor sensors only. Model PA-PRO has both odor sensors and particle sensors. PA - 777 / PA PRO 7
Diagram of the outer unit PA-777 LED Operating Panel NonPolluted SemiPolluted PA-PRO Color LED Operating Panel HighlyPolluted ULPA ULPA Operating Buttons Purple Air Quality LED PA - 777 / PA PRO
PA - 777 / PA PRO
Air sensor power settings The unit begins to record air quality once it is plugged in. Air quality will continue to be recorded so that the unit will turn on and off based on changes in the air quality. The ULPA ULPA Filter or Aluminum Electric Static Plasma Filter RESET Button After cleaning or replacing the ULPA Filter or Aluminum Electric Static Plasma Filter, press the respective reset button to alert the unit to begin recording the working time of the appropriate filter. ULPA Aluminum Electric Static Plasma Filter & ULPA Filter RESET buttons ULPA ULPA Disassembly and reassembly of the front panel Use your fingertips to locate the indents on each side of the bottom front panel. With your fingertips in place, smoothly pull the bottom front panel towards you until it disconnects from the unit. Avoid forced disassembly with one hand. Insert the top of the front panel to the upside of the unit. Press the bottom and top of the front panel until it is secured in place. Then use two hands, one on each side of the middle of the front panel, and press forward firmly until you hear each side of the panel click into place. The front panel should be flush against the unit, it should not be bowed. *Diagram of reassembly Slip the clips into the indentations PA - 777 / PA PRO 10
Press the POWER button. The POWER LED lights up and the unit powers on. Manual Mode UV ANION (Ion) Static LOW Fan Speed PA - 777 Power LED PA- PRO Manual Mode Press the ANION (Ion), UV and STATIC buttons to turn these features on and off individually. All three features are on by default. Their corresponding lights will turn on and off on the LED panel as the feature buttons are toggled. The ULPA + Activated Carbon + Photo Catalyst combination filter is working whenever the unit is powered on. The remote control can control the functions separately. It is recommended that ANION (Ion), UV and STATIC remain on for optimal benefit. Mode settings (Air sensor function must be off) Press the MODE button repeatedly to select the preferred mode of operation: MANU (Manual), AUTO (Automatic), 1H, 2H or 4H function. The MODE LED will show: MANU: Manual mode; the unit needs to be turned on and off manually AUTO: Automatic mode; the unit is set to alternate in 20 minutes on, 40 minutes off cycles 1H: The unit will power off after 1 hour 2H: The unit will power off after 2 hours 4H: The unit will power off after 4 hours. The air sensor function must be off to use any individual MODE settings. PA - 777 / PA PRO 11
Fan speed settings (Air sensor function must be off) Press the SPEED button to select the preferred fan speed; LOW, MEDIUM or HIGH. The SPEED LED will show: The air sensor function must be off to use any individual SPEED settings manually. Automatic air quality sensor settings (Sensor mode) Press the SENSOR button. The pollution LED strip on the front panel of the unit will light up and the unit will work in air quality sensor mode. In this mode, the unit s function and fan speed will adjust automatically to the air quality in your environment. There are three main color indicators representing the air quality: Blue (Non-Polluted) Purple (Semi-Polluted) Red (Highly-Polluted) Hibernation Low fan speed High fan speed When turning on the Air Sensor mode, the pollution LED strip will always be in red. True air quality indicator colors will not be available for 3 minutes after entering Air Sensor mode. The unit will need adequate time to record and adjust to the environment s air quality. Operating while in Sensor mode When the air sensor function is on, the unit has Air Sensor Interception Control (AIC). It records the pollution of the air every 20 minutes and the unit will work according to the pollution / air quality record. The pollution / air quality record will be erased after the power is disconnected. The pollution / air quality record will be replaced everyday. PA - 777 / PA PRO 12
MAINTENANCE AND CLEANING INSTRUCTIONS PLEASE REMOVE THE PLUG FROM THE WALL OUTLET BEFORE ATTEMPTING TO MAINTAIN OR CLEAN THE UNIT. Clean the outside of the unit (the panels) with a damp soft cloth only. Do not directly apply water to the unit. Do not use any chemicals, solvent, alcohol, aerosols or any other type of cleaning solution on the unit. Failure to do so may cause damage to surface and paint Cautions for cleaning the carbon fiber of the ion generator Open the cover and clean the carbon fiber head with the soft bristled brush that was shipped with your unit. Close the cover securely when finished. Clean the carbon fiber head once per month. Do not put any metal materials or foreign objects to the carbon fiber head even when the power is off. There is still a small quantity of high voltage power. Cautions for cleaning the Aluminum Electric Static Plasma Filter When the Auto Filter Cleaning/Replacement LED is on for the Aluminum Electric Static Plasma Filter and/or you hear a sound notification, it is your reminder to clean this filter. Aluminum Electric Static Plasma Filter cleaning/replacement LED Take out the Aluminum Electric Static Plasma filter, rinse it thoroughly with water or clean it with a soft brush. Dry it thoroughly before putting it back into the unit. After putting it back into the unit, press the STATIC RESET button. You will hear a sound notification. The unit is now recording the working time of the filter. PA - 777 / PA PRO 13
Diagram of disassembly and installation of the Aluminum Electric Static Plasma Filter Diagram of disassembly: Remove the front panel of the unit. Slide out the combined ULPA filter by pulling on the fabric loops at the top and bottom of the filter casing. With the combined ULPA filter removed, use your fingertips to locate the indentations on the sides of the Aluminum Electric Static Plasma Filter. Slide the filter out smoothly. Diagram of installation: Use your fingertips to locate the indentations on the sides of the filter. Line the filter up properly to its entrance into the unit and push it forward into the unit smoothly. PA - 777 / PA PRO 14
PA - 777 / PA PRO 15
Refer to the below FAQs before contacting the retailer or sending it in for repair. Issue Possible Solution The unit does not power on Ensure the plug has not disconnected from the electrical socket Ensure the front panel is securely in place in all four corners and in the middle. When in air sensor mode, the unit runs continuously as though the air quality never changes. The air pollution LED is in RED continuously. The air quality in your environment may be highly polluted due to vapor, strong odor, smoke, aerosol, etc. Move the unit to another room to test it. The air sensor switch may be set to HIGH. Change to LOW. Odor in the room is not being removed by the unit. The Activated Carbon Filter inside of the unit may need cleaned or replaced. First, clean the Activated Carbon Filter as is described previously in this manual. If the cleaned filter does not solve the problem, replace it with a new filter. Particles (dust, dirt, etc.) in the air are not being removed by the unit and/or the unit seems to be running loudly. The combination ULPA Filter inside of the unit may need replaced. Contact the retailer for a replacement filter. When in air sensor mode, the unit does not seem to kick on although the air quality is noticeably polluted. The air pollution LED is in BLUE continuously. Particles (dust, dirt, etc.) may not be absorbing into the filters. Move the unit to another room to run continuously in HIGH fan speed. The room size may be too large for the unit to control its air quality appropriately. The air sensor switch may be set to LOW. Change to HIGH. If the problem still exists after the above troubleshooting, please disconnect the power and contact the retailer for repair. PA - 777 / PA PRO 16
Residential / Light Commercial Portable Air Purification Unit Description PA Residential/Light - 777 / PA -PRO Commercial Portable Air Purification Unit Model PA - 777/PA-PRO Fan Speed LOW MEDIUM HIGH Air flow volume (m3/h) 400 450 500 Noise level (db) 25 33 42 Power rating (W) 28 35 43 Ions 8x10 2 ions/cm 3 Length of power cord 3.0 m Product size 580x450x240(mm) Net weight Voltage supply 25 lbs 110V~120V, 60Hz Applicable area up to 1000 sq. ft. (2) The consumed power is around 2W when the unit is powered off. It is suggested to unplug the unit from the electrical outlet if the unit will not be in use for a period of time in order to save energy. W 100 Technical parameters of Aluminum Electric Static Plasma Filter PA - 777 / PA PRO 17
Technical Specifications parameters of the air sensor of the ULPA ULPA 0.1 micron * * when used under normal conditions as outlined in the manual Specifications of the air sensor Will Work Naturally May Work Abnormally Can Not Work smoke, incense, cooking odors, common household odors, common pet odors, alcohol, aerosol, etc. vapor, cooking smoke, in an environment where there are quick flows of air or drafts of air, in an environment where there are quick changes in temperature, etc. floating dust, dirt, debris, bacteria, viruses, pollen, pet dander, etc. floating dust, dirt, debris, pollen, pet dander, etc. smoke, smog, fog, etc. alcohol, bacteria, viruses, etc. Serial # PA - 777 / PA PRO 18
PA-777 / PA-PRO Portable Air Purification Unit You will not be notified by the retailer or manufacturer if there are any changes to the parameters or specifications of this product. Please contact the retailer for any questions or concerns or visit us at www.petairapy.com for any product updates, news or further information. PA - 777 / PA PRO 19
PetAirapy LLC 2774 E. Main St. Suite 144 St. Charles, IL 60174 1-866-994-AIRE(2473) www.petairapy.com PA-777 / PA-PRO Portable Air Purification Unit Instruction Manual