Machinery Listings Complete Plant Benninger Seizing Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 10775 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/10775.zip -BENNINGER DIRECT WARPING AND SIZING PLANT YEAR 2003 MAKE: BENNINGER YEAR: 2003 A) BENNINGER DIRECT WARPING MACHINE 1800mm YEAR 2003 MODEL: BEN-DIRECT WORKING WIDTH: 1800mm BEAM FLANGE DIA 1200mm BENNINGER V-CREEL BENNINGER CLEAN-VAC SYSTEM B) BENNINGER SIZING MACHINE YEAR 2003 YEAR: 2003 MODEL: BEN-SIZE TEC 24 BEAMS CREEL 2 X SIZE BOX DOUBLE DIP AND DOUBLE NIP 14 DRY CANS OUT OF WHICH 10 ARE TEFL COATED HEADSTOCK WIDTH: 3400mm WITH MAX FLANGE DIA 1200mm SIZING KITCHEN MAKE BENNINGER WITH 1 COOKER AND 1 MIXER EXCELLENT CDITI QUANTITY: 1 Price: 520.000 Euro Location: Europe Seizing Benninger Seizing Reference: 7347 Cost: 0 Terms: -. BENNINGER SIZING ZELL 1800 MM Year: 1992 Type: UZ4/4/4. EK/EK/ZBW 16ZR 160/63 Beam Creel Cap: 16 No of Size Boxes: 2 No of Drying Cyl: 12 Working width: 1800 mm Max Beam width: 1900 mm Dia H/S: 1800 mm Size Cooker: 1000 ltr Size Ztrorage: 1000 ltr Spares: 1 x squeezing roll, 1 x imerson roll, 1 x Bottom roll Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!
Reference: 11054 Cost: 0 Terms: - - 1 Santa Clara (Benninger) Sizing Machines (Slashers) Model WN.10 Headway 160 inches Wide Delivery Roller (4 Meter) 2 Size Boxes 112 inches ( 285cm) Width 12 Dry Cans 110 inches (280cm) Enclosed 16 Beam Creel Moisture Monitors & Temperature Monitors With Drives & Control Panels With 1 Size Cooking Kettle Year: 1994 Price: F.O.T. USD 395,000.00 1 Santa Clara (Benninger) Sizing Machines (Slashers) Model TZ.G.4 Headway 160 inches Wide Delivery Roller (4 Meter) 1 Size Boxe 112 inches ( 285cm) Width 8 Dry Cans 110 inches (280cm) Enclosed 16 Beam Creel Moisture Monitors & Temperature Monitors With 2 Control Panels With 1 Size Cooking Kettle Year: 1994 Price: F.O.T. USD 395,000.00
Reference: 11735 Cost: 0 Terms: SEE - 1 2001 Benninger High Speed Direct Warper Model Ben-Direct 54 inches Warping width With pressure Roller With Zig Zag Reed and Lint screen 1 2001 Benninger V Creel 600 Running Ends 600 reserve Ends Inside Loading & Outside Discharge Benninger Ben-Gard Electron stop motion Benninger Ben-Tens Tension units Automatic cutters Package holders at 16 inch vertical & horizontal centers Year of manufacture: 2001 Tag # 44627(warper) 44628(creel) 1 Sucker Müller Sizing Machine with: (1) 12 Position Beam Creel Year 1994 (1) Wet on Wet Size Box / 2000 mm Model SC50 Serial number SC 12990036.235-1 Year 1999 With Siemens electronic controls Year 1999 Siemens electronics by BKW Model SK.07E1VY-20100 Year 1999 (8) Dry Cans Teflon & Stainless Steel with Temperature Controls Dry Cans / 2000 mm Model ZS/4/4 Year 1994 (1) Head Stock, Type WN12, 168" Delivery Roller to Accommodate Max. Beam Barrell Length 160", 125 cm Flange Dia. BKW Electronic Model SK 05E1VY-20100 Year 1994 With Pleva Model AS120 (1) Range Drive Year 1999 Total Price above Warping and Sizing Set USD 295,000.00 Reference: 11909 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/11909.zip -SIZING MACHINE BENNINGER + WARP KNITTING 1994 model yoc. With warp beams. Sizing Working width 2.20 cm Output is 280 cm. 740 amount roller. Warp knitting work width 1.80 cm. Price:280.000 dollar CNF
Reference: 12098 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/12098.zip -We have available the following Benninger ( Santa Clara ) Warping and Sizing equipment from the factory floor subject to prior sale: PROPOSAL NO. 14/13 N 03- Benninger ( Santa Clara ) High Speed Direct Warpers Model MZD 98 inches Working width With Press Roller With Automatic Beam loading & UnLoading Year: 1994 Tag # 833xx, 833xx N 03- Benninger ( Santa Clara ) V Creels Santa Clara Electronic Stop motions 800 Running Ends 800 Ends in Reserve Year: (2) 1994, (1) 1995 Tag # 833xx, 833xx Price: F.O.T. USD.165,000.00 / total price 3-warper + 3-creel ( loading n 3-containers 40 H.C./box.) N 02 - Benninger ( Santa Clara ) Sizing Machines (Slashers) Model WN.10 Headway 160 inches Wide Delivery Roller (4 Meter) 2 Size Boxes 112 inches ( 285cm) Width 12 Dry Cans 110 inches (280cm) Enclosed 16 Beam Creel Moisture Monitors & Temperature Monitors With Drives & Control Panels Tag #54157 With 1 Size Cooking Kettle Tag #541xx Year: 1994 Price: F.O.T. USD. 450,000.00- total price 2 sizing ( loading into n 8/9-containers 40 H.C./box.) Your consideration and prompt response will be most appreciated. Regards,
Reference: 12697 Cost: 0 Terms: - http://finatexinternational.com/pictures/12697.zip -BENNINGER-ZELL high productive sizing range, model BEN-SIZETEC ZA20 2KAV/TD CT 4/4/6 BB 1600/4000, YOC 1995. Composed of: Benninger beams creel model ZA20 for 20 fractional beams each width 1800mm (flange to flange), max flange diam 1250mm, with air pneumatic braking system. Unwinding tension 150N for beam with flange diam 1250mm, 160N for beam with flange diam 1000mm at the air pressure of 6 bar. -beam-loading-unloading carrier with on-floor rails. N 2 electronic drafting force measuring systems model MW. N 1 water pre-wetting tank, with: feeding group with 1 stainless steel cilinder, 1 rubber-covered cylinder, 1 chromed cylinder, 2 sections tank, max water temperature 90 C, each section capacity 300 lt. Squeezing system at the exit of each section. N 2 BENNINGER size boxes model TD, cylinders width 2100mm, working width 1900mm, each box with 2 pairs of squeezing cylinders and 1 immersion cylinder, adjustable squeezing pression up to 5.000 dan (kgf), pneumatic device for pressure and lifting of the cylinder, Automatic regulation of squeezing pressure by BEN-SIZETEC system. Automatic size feeding device. HANDYMAT sizing box control system with display. Wet separating field for impregnating box for separation of the warp in two layers, with 1 teflon-covered steam-heated measuring cylinder and 1 teflon-covered steamheated deviating cylinder. N 1 Benninger compact dryer type CT4/4/6, 14 drying cylinders width 2100mm (4+4+6), 10 of them tefloned, diam 800mm. Saturated steam 3,5 bar, max temperature 147 C. 5 electronic temperature regulations; comand by means of 3 phases motor and inverter. Standard hooder with 2 fans. CV oiling and waxing device at the exit. MAHLO humidity control and regulation. Dust suction and filtering system. Dry separating field 6,5 meters length, with 19 chromed leasing positions. N 1 Benninger high productive headstock/beaming model BB, width 4200mm, max working width 4000 mm, suitable for beams up to max flange diam 1100 mm, speed from 0,4 to 125 m/min, chain tension 1500 dan, inverter control, extensible reed. Computerized microprocessor automatic control system, PC and modem. Siemens Simatic PC FI15 software with monitor. Size kitchen model SIZEMEIX 1200, capacity 1400 lt, working capacity 1200 lt, with automatic temperature regulation system, water counter. N 2 storage tanks model V1300, working capacity 1300 lt each 1000 lt capacity each, temperature regulation.
Reference: 12939 Cost: 0 Terms: - -1 BENNINGER ZELL sizing machine Mod. BEN - SIZETEC working width 2200 mm Year 1994 N A13715 Mod. BB-S/ZT4/4/TKD 1 Sectional beam unrolling device Mod. SWA with load cell tension control Electro pneumatic breaking system Maximum beam diameter 1000 mm. 1 Fractional beaming unrolling device with capacity up to 20 positions Electro pneumatic breaking system 1 Sizing box Mod. TDK working width 2200 mm. total width 2400 mm Stainless still box with total capacity of 240 liters with direct steam injection Lower vessels with indirect heat system Automatic size box feeding Handymat for start and stop and machine regulation 1 Drying section device Mod. ZT8 working width 2200 mm 6 drying stainless steel cylinders covered with Teflon + 2 cylinders without Teflon 4 electronic temperature regulations 2 air extraction 1 oil/grease application device Mod. CV 1 Yarn splitting device 7 rods for sectional beams 19 rods for fractional beams 1 Humidity MAHLO control device Mod. RMS-7S n 1670/1/10597 1 Beam rolling device Mod. BB for beams up to 1000 mm diameter yarn traction made up of 3 rolls 1 pressurized roller device tension and pressure measure devices automatic beam lift device inclusive of adaptors for different beams extension reed for ends width control mirror for easy yarn control 1 handymat for start and stop and machine regulation 1 dust suction device 1 Complete size kitchen preparation including 2 tanks for size storage 1 Fully automatic BENSIZETEC process control device including hardware and software 1 External electric cabinet Reference: 13349 Cost: 0 Terms: - -01 BENNINGER SIZING MACHINE High productive sizing range, model PROCOMAT ZELL, Composed of:benninger zell beams creel model for 20 fractional beams each width 1800 mm (flange to flange), max flange diam.1000 mm, 2 Benninger Zell size box model, cylinders width 2000 mm, working width 1800 mm each box with 2 pairs of squeezing cylinders and 2 immersion cylinder. 1 Benninger Zell compact dryer type 12 drying cylinders width 2000 mm 4+4+4, 10 of them tefloned, diam 800 mm. 1 Benninger Zell high productive headstock/beaming model Width 400 mm, max working width 3900 mm Suitable for beams up to max flange diam 1100 mm Speed from 0,4 to 125 m/min, Computerized microprocessor automatic control system. Year 1990 Machine was revised in 2001 VOLTAGE : 380/400 Volts with 3 Phase and 50/60 Hertz
Reference: 14457 Cost: 0 Terms: - http://finatexinternational.com/pictures/14457.zip -1 Nos BENNINGER ZELL SIZING MACHINE 1 Nos BENNINGER ZELL SIZING MACHINE Year :2000, Width:2400 mm High productive sizing range, model BEN-SIZETEC Composed of: Benninger beams creel model ZA20 for 12 fractional beams each width 1800 mm (flange to flange), max flange diam 1250 mm, with air pneumatic barking system. 1BENNİNGER washing wet box 1 BENNINGER size box model TD, cylinders width 2400 mm, working width 2000 mm, each box with 2 pairs of squeezing cylinders and 2 immersion cylinder. Automatic size feding device HANDYMAT sizing box control system with display. 1 Benninger compact dryer type CT6/6, 12 Drying cylinders width 2400 mm (4+4+4), 10 of them tefloned,2 of them stainless steel, diam 800 mm. MAHLO humidity control and regulation. 1 Benninger high productive headstock/beaming model, width 2600 mm, max working width 2400 mm, suitable for beams up t oma flange diam 1100 mm, speed from 0,4 to 125 m/min. Size kitchen model SIZEMEIX, capacity 1000 lt, working capacity 1000 lt, with automatictemperature regulation system, water counter N2 storage tanks model, working 1000 lt capacity each, temperature regulation. With all spare parts belongs to machine in the floor LOCATI: ITALY MACHINE CAN BE SALE WITH WARPER MACHINE. Reference: 10746 Cost: 0 Terms: SEE -Sizing Machine Benninger 1994 model yoc. With warp beams. Working width 2.20 740 amount roller. Price:250.000 euro ex.work Reference: 14560 Cost: 0 Terms: SEE -1 BENNINGER "Ben-Sizetec" sizing machine year 1997, headstock BBE working width 3500mm for beamdiscs diam. max. 1250mm, 2 creels ZA16 each for 16 warpbeams 1800 x diam.1000mm, 2 size-boxes TKE, 12 drying cylinders CT 4/4/4, with size-cooking device Ben-Sizemix, 32x400 V / 50 Hz. Price: Euro 200.000/-- CFR major seaport Warping Benninger Seizing
Reference: 5012 Cost: 370,000 Terms: EACH, http://finatexinternational.com/pictures/5012.zip EURO, CNF 1 BENNINGER SIZING MACHINE model BEN SIZETEC, year 2004, creel 24 positions diam. 1250, widtrh 2400, 2 sizing box, 1 dryer 14 cylinders, head max width 4 mts, beam diam. 1100. Reference: 7324 Cost: 0 Terms: - N 01- BENNINGER fractional warpers Model BEN DIRECT year 2004 Serial number Working width 2400 mm. Flange beam diam. max. 1250 mm. Dust aspiration CLEANVAC CREEL Model a V, Positions 720 Cones diam max 300 mm. Tubes evacuation device TRASTECNICA N 01- BENNINGER SIZING MACHINE Model BEN SIZETEC year 2004 Serial number n.1-fix creel for beams from 24 positions of fractional beams with flange diam. 1225mm. working width internal flange to flange 2400 mm. n. 2 - size boxs with pre-wet tanks, and separate tank with double set of double squizing n. 2 -zones of separating of warp yarns in wet condition. n. 1- Dryer with 14 cylinders n. 1 Head Beaming of high production Working width max 4000 mm. Beams with flange of diam 1100 mm. n. 1- Electronic system control for automatic processing Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 16254 Cost: 0 Terms: - -1 X BENNINGER ZELL HIGH PERFORMANCE SIZING MACHINE, 1995 TYPE: BEN Sizetec SWA TKD 2T8 BB USABLE WIDTH: 2200mm MACHINE TYPE: BEAM TO BEAM SINGLE SIZE BOX CSISTING OF DOUBLE DIP, DOUBLE NIP ROLLERS WET SPLITTING ZE 8 DRYING CYLINDERS WAXING DEVICE SIZE KITCHEN WITH COOKER TYPE SHEARTRIC 700, CAPACITY 700 litres, SIZE STORAGE TANK TYPE V10T, CAPACITY 1000 litres AUTOMATIC DELIVERY SYSTEM TO SIZE BOX UPGRADED WITH HMI SYSTEM TOUCH SCREEN IN 2011