Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction. These devices have a high electrical surge capability to help protect against transient faults and a high off-state impedance, rendering them virtually transparent during normal system operation. SiBar thyristor surge protectors are designed to assist telecommunication and computer telephony equipment in meeting the applicable requirements and industry specifications. Benefits: Helps provide protection for sensitive telecom electronic equipment Low capacitance Low leakage current Low power dissipation Fast, reliable operation No wear-out mechanisms Helps designers meet worldwide telecom standards Helps reduce warranty and service costs Easy installation Helps improve power efficiency of equipment Features: RoHS compliant available on all parts Bidirectional crowbar transient voltage protection Broad voltage range 6V 400V Low capactiance 20pF-45pF @ 50V High off-state impedance Low on-state voltage High surge capability Short-circuit failure mode Surface-mount technology DO-214AA SMB package 10 x 1000 μs 100A surge rating Helps equipment comply with TIA-968, Telcordia GR-1089, IEC61000-4-5, ITU K.20/21/45 Applications: Central Office Equipment Analog and digital linecards (xdsl, T1/E1...) Phones, answering machines Set top boxes POS systems Fax Machines PBX systems 2007 Tyco Electronics Corporation. All rights Reserved. 1 Rev: B Date: December 12, 2007
Table SB1 - Electrical Characteristics Part Number V DM Max. V BO Max. I H Min. (ma) V T Max. C1 (Typ) @ 50V DC Bias (pf) C2 (Typ) @ 2V DC Bias (pf) TVB006RSC-L 6 25 50 (typ) 4 --- 75 5 TVB025RSC-L 25 40 150 4 --- 65 5 TVB035RSC-L 35 55 150 4 --- 55 5 TVB065RSC-L 65 88 150 4 45 90 5 TVB090RSC-L 90 125 150 4 40 80 5 TVB120RSC-L 120 160 150 4 35 75 5 TVB140RSC-L 140 180 150 4 30 65 5 TVB170RSC-L 170 220 150 4 30 60 5 TVB190RSC-L 190 260 150 4 30 60 5 TVB220RSC-L 220 295 150 4 30 60 5 TVB270RSC-L 275 350 150 4 30 60 5 TVB300RSC-L 320 400 150 4 25 50 5 TVB360RSC-L 360 460 150 4 25 50 5 TVB400RSC-L 400 540 150 4 20 45 5 Notes: All electrical characteristics are measured at 25 C. VDM measured per UL497B pulse requirements: at max. off-state leakage current (IDM) = 5 µa. VBO measured at 100V/µs. Off-State Current @VDM (μa) Table SB2 Surge Current Rating Part Number TIA-968 Telcordia GR-1089* IEC61000-4-5 ITU K.20/21/45* Type A 5 x 320 µs Type B pp (A) 10 x 560 µs 10 x 160 µs 10 x 1000 µs 2 x 10 µs 8 x 20 µs I PP (A) 5 x 310 μs (VOC: 10 x 700μs) I TSM Min. (A) di/dt dv/dt (A/µs) (V/µs) TVBxxxRSC-L 150 140 200 100 500 400 150 41 500 2000 Notes: *Lightning current wave forms for applicable industry specification. ITSM, peak on-state surge current is measured at 60 Hz, one cycle. di/dt: critical rate-of-rise of on-state current (pulsed power amplifier Vmax = 600V; C = 30µF). dv/dt: critical rate-of-rise of off-stage voltage (linear wave form, VD = rated VBO, Tj = 25 C) 2007 Tyco Electronics Corporation. All rights Reserved. 2 Rev: B Date: December 12, 2007
Table SB3 Dimensions in Millimeters A B C D Dimension Min. Max. Min. Max. Min. Max. Min. Max. 4.06 4.57 3.30 3.94 1.90 2.41 1.95 2.20 TVBxxxRSC-L (0.160) (0.180) (0.130) (0.155) (0.075) (0.095) (0.077) (0.086) H J K P S Dimension Min. Max. Min. Max. Min. Max. Ref Min Max. 0.051 0.200 0.150 0.31 0.76 1.27 0.51 5.21 5.59 TVBxxxRSC-L (0.002) (0.008) (0.006) (0.012) (0.030) (0.050) (0.202) (0.205) (0.220) Notes: *D dimension is measured within dimension P. TVB series devices use industry standard SMB package type. All devices are bidirectional and may be oriented in either direction for installation Table SB4 Physical Characteristics and Environmental Specifications Lead material Matte tin finish (-L devices) Encapsulating material Epoxy, meets UL94V-0 requirements Solderability per MIL-STD-750, Method 2026 Solder heat withstand per MIL-STD-750, Method 2031 Solvent resistance per MIL-STD-750, Method 1022 Mechanical shock per MIL-STD-750, Method 2016 Vibration per MIL-STD-750, Method 2056 Storage temperature ( C) -55 to 150 Operating temperature ( C) -40 to 125 Junction temperature ( C) 150 Maximum Lead Temperature for Soldering Purpose; for 10s ( C) 260 Table SB5 Reliability Tests Test Conditions Duration High temperature, reverse bias +100 C, 50VDC bias 1000 hours High humidity, high temperature, reverse bias 85% RH, +85 C, 50VDC bias 1000 hours High temperature storage life +150 C 1000 hours Temperature cycling -65 C to +150 C, 15 minute dwell 1000 cycles Autoclave 100% RH, +121 C, 15 PSI 96 hours 2007 Tyco Electronics Corporation. All rights Reserved. 3 Rev: B Date: December 12, 2007
2007 Tyco Electronics Corporation. All rights Reserved. 4 Rev: B Date: December 12, 2007
Table SB6 Packaging and Marking Information Recommended Pad Layout (millimeters/inchs) Part Tape and Reel Standard Part Dimension Dimension Dimension Agency Description Quantity Package Marking A (Nom.) B (Nom.) C (Nom.) Recognition* TVB006RSC-L 2,500 10,000 06RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB025RSC-L 2,500 10,000 25RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB035RSC-L 2,500 10,000 35RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB065RSC-L 2,500 10,000 65RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB090RSC-L 2,500 10,000 90RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB120RSC-L 2,500 10,000 12RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB140RSC-L 2,500 10,000 14RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB170RSC-L 2,500 10,000 17RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB190RSC-L 2,500 10,000 19RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB220RSC-L 2,500 10,000 22RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB270RSC-L 2,500 10,000 27RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB300RSC-L 2,500 10,000 30RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB360RSC-L 2,500 10,000 36RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL TVB400RSC-L 2,500 10,000 40RC 2.261 (0.089) 2.159 (0.085) 2.743 (0.108) UL *UL497B, File # E179610 308 Constitution Drive, MS R21/2A Tel (800) 227-7040 www.circuitproection.com Menlo Park, CA USA 94025-1164 (650) 361-6900 www.circuitprotection.com.hk (Chinese) Fax (650) 361-2508 www.circuitprotection.jp (Japanese) Raychem, PolySwitch, SiBar, TE Logo and Tyco Electronics are trademarks. All other trademarks and copyrights are property of their respective owners. 2007 Tyco Electronics Corporation. All rights Reserved. 5 Rev: B Date: December 12, 2007