ARCHITECTURAL WASHROOM & JANITORIAL ACCESSORIES 420 Eddystone Avenue, TORONTO, ON, M3N 1H7, Ph : (41) 744-3039 Email : bandp@bellnet.ca, saferail@bellnet.ca Email:bandp@bellnet.ca, saferail@bellnet.ca

MIRRORS 3-4 SOAP DISPENSER 5- PAPER DISPENSER 7-8 COMBINATION TOWEL WASTE UNIT 9- WASTE RECEPTACLE 13 STAINLESS STEEL GRAB BAR 14-1 SHELF 17 HOOKS 18 HYGIENIC PAPER ROLL HOLDER 19 TOWEL AND SHOWER 20 AIR DRYERS/ SHOWER STEATS 21 ARCHITECTURAL WASHROOM & JANITORIAL ACCESSORIES Tel : (41) 744-3039

MIRRORS MIRRORS 100 Angle Frame Mirror STANDARD SIZES: 1" (40mm) W x " (10mm) H 1" (40mm) W x 30" (72mm) H 18" (458mm) W x " (10mm) H 18" (458mm) W x 30" (72mm) H " (10mm) W x 30" (72mm) H " (10mm) W x 3" (914mm) H Note: Other sizes available up on special request. SPECIFICATIONS: Angle frame fabricated of type 304,18 gauge stainless steel with returns of.25(1mm) corners heliarc welded and polished #4 satin polish frame. Mirrors are #1 select polished (mm) float glass with 10 years guarantee against silver spoilage. Concealed and vandal - resistant plate. Suffix:.10 laminated mirror.20 tempered mirror.30 polished stainless steel mirror Width Height 130t Adjustable Tilt Mirror (Channel Frame) STANDARD SIZES: 1" (40mm) W x " (10mm) H 1" (40mm) W x 30" (72mm) H 18" (458mm) W x " (10mm) H 18" (458mm) W x 30" (72mm) H " (10mm) W x 30" (72mm) H Note: Other sizes available up on special request. SPECIFICATIONS: One piece frame fabricated of type 304 stainless steel with returns of.25 (1mm). Platefabricated with satin galvanized steel. Mirrors are #l select polished (mm) float glass with 10 years guarantee against silver spoilage, concealed to inclined of " (I50mm) to blocking mechanism or return to vertical position, very resistant con-tinuous piano hinge across width of frame. Suffix:.10 laminated mirror.20 tempered mirror.30 polished stainless steel mirror Height Width Piano hinge 110 Fixed Tilt Mirror STANDARD SIZES: 1" (40mm) W x " (10mm) H 1" (40mm) W x 30" (72mm) H 18" (458mm) W x " (10mm) H 18" (458mm) W x 30" (72mm) H " (10mm) W x 30" (72mm) H Note: Other sizes available up on special request. SPECIFICATIONS: Tilt frame fabricated of type 304,18 gauge stainless steel. All exposed surfaces #4 satin finish, plate fabricated with satin galvanized steel, secure concealed mounting bracket and vandal-proof Suffix:.10 laminated mirror.20 tempered mirror.30 polished stainless steel mirror Height 50 Medecine Cabinet (stainless Steel) SPECIFICATIONS: Recessed cabinet, entirely fabricated of type 304, 22 gauge stainless steel. Door secured with full lenght piano hinge, concealed latch, adjustable shelves. All exposed surfaces polished to a # 4 satin finish. Plated glass (5mm) thick mirror, guaranteed for 5 years against silver spoilage. Wall Opening 50 Recessed 15-3/8" (390mm) W. x 25-3/8" ( 44mm) H x 3-1/2*(90mm) DP (381mm) 27 (89mm) Slots to adjust Shelves height 25 (35mm) Width 50-100 Semi-Recessed 15-3/8" (390mm) W X 25-3/8" ( 44mm) H X 1-1/2"(38mm) DP. 17 (445mm) 1 (25mm) 3-1/2 (90mm) 51 Surface mounted 130 Channel Frame Mirror STANDARD SIZES: 1" (40mm) W x " (10mm) H 1" (40mm) W x 30" (72mm) H 18" (458mm) W x " (10mm) H 18" (458mm) W x 30" (72mm) H " (10mm) W x 30" (72mm) H " (10mm) W x 3" (914mm) H Note: Other sizes available up on special request. SPECIFICATIONS: One piece frame fabricated of type 304 stainless steel with returns of. 25 (1mm). Plate fabricated with satin galvanized steel. Mirrors are #1 select polished (mm) float glass with 10 years guarantee against silver spoilage, concealed wall hanger, secure and vandal resistant. MODEL TW00 Suffix:.10 laminated mirror.20 tempered mirror.30 polished stainless steel mirror Width Height 147 REC Recessed Medicine Cabinet 150 SURF SPECIFICATIONS: Recessed medicine cabinet fabricated of 22 gauge C.R.S. with a baked enamel epoxy finish, Mirror 5mm thick with a stainless steel edging. Door secured with stainless steel piano hinge and magnetic catch. Wall Opening: 14-1/4" (32mm) W x 18-3/8 ( 47) H x 4-3/4 (47)H x 4-3/4 (1mm) DP 13-1/2 (342mm) 1 (40mm) 22 (558mm) 17-1/2 (445mm) 3 420 Eddystone Avenue, Toronto, ON, M3N 1H7, Ph : (41) 744-3039 E-mail:bandp@bellnet.ca, saferail@bellnet.ca 4

SOAP DISPENSER SOAP DISPENSER 3-1/ (83mm) 9-1/2 (0mm) 220- Soap Dispenser Counter Mounted (VANITY) SPECIFICATIONS: The vanity dispenser is for liquid or lather. Piston, valve and spout are stainless steel. Chrome plated holder shank and cover translucent polyethylene holder. with " (152mm) spout Capacity: 1 litre (oz) OPENING: holder opening 1" (25mm) 214 Pull Out Soap Dispenser 201/200 Soap Dispenser Surface Mounted Specifications: This dispenser cover is fabricated of polish stainless steel. Soap level in container shall be visible through viewing slots. Fill up is made by the top and for more security, filler hole cover is stainless steel 18-8 type. The dispenseris surface mounted with vandalproof wall plate. Capacity::.35 litre (oz) MODEL 201 liquid soap MODEL 200 lather (152mm) -3/1 (158mm) 3-5/ (80mm) 3.31 (84mm) 5.0 (130mm) 4.25 (108mm).88 (175mm) 3.53 (90mm) 9.88 /11.88 (251/302mm) 221 Soap Dispenser Counter Mounted SPECIFICATIONS: Will dispense liquid soap, lotion soap, and hand disinfectants. Stainless steel pump system housed in highly polished chrome finished cassing. Polyethylene bottle 1 litre ( oz). SPECIFICATIONS: "Pull Out" Design soap dispenser shall be fabricated of see-through double case designed container made of non-corrosive ABC CAPACITY : 27 ounces (.27litres}accepts all kinds of liquid soap. 8 13/1 225 mm 43/ 0 mm 21/ 0 mm 100 mm 211 Soap Dispenser Surface Mounted SPECIFICATIONS: chrome plated casing, translucent polyethylene globe corrosion free valve. Capacity:.50 litre (1oz) 4-3/7 (0mm) 5-1/ (1mm) 7 (180mm) 8-1/8 (205mm) 8-11/1 (220mm) 5-1/20 (140mm) 5-5/1 (135mm) 202 Soap Dispenser Wall Mounted Specifications: Liquid and lotion soap dispenser. The container fabricated of smoke translucent polycarbonate.back plate fabricated of smoke translucent polycarbonate with four holes and shlfsticking. Fiz by top. Simple, one hand poush-button operation results in dispenser being pushed towards the fixing, not pulled from it. Capacity 1.5 litre (48 onces) 205 Soap Dispenser Surface Mounted (STAINLESS STEEL) 5-1/ (134mm) SPECIFICATIONS: The tank is stainless steel, #20 gauge, stain finished #4 back plate 15 heliac welded, which make's it water-tight. Unit has concealed back plate and locked opening which minimise vandalism. The valve is plated brass with ABS piston and stainless steel spring. Liquid or lather dispenser. Capacity: 1.2 litre (40 oz) 20 Soap Dispenser Mounted (STAINLESS STEEL) 5-1/ (134mm) 5 420 Eddystone Avenue, Toronto, ON, M3N 1H7, Ph : (41) 744-3039 E-mail:bandp@bellnet.ca, saferail@bellnet.ca

PAPER DISPENSER PAPER DISPENSER 2-3/ (70mm) (152mm) 1-3/ (45mm) -3/ (172mm) -5/8 (18mm) -1/ (3mm) 1-3/ (45mm) 2-3/ (70mm) (152mm) (152mm) 4-1/2 (108mm) -1/2 (0mm) 13 (0mm) 4-1/2 (108mm) 421 Hygienic Paper Dispenser Surface-mounted SPECIFICATIONS: Single roll hygienic paper dispenser, is fabricated of heavy gauge steel with bright chrome finish. Dispenser with spring tension for controlled distribution and self locking device to prevent removal. 422 Hygienic Paper Dispenser Surface-mounted SPECIFICATIONS: Double roll hygienic paper dispenser, is fabricated of heavy gauge steel with bright chrome finish. Dispenser with spring tension for controlled distribution and self locking device to prevent removal. 425/42 Hygienic Paper Dispenser With Decline Hood SPECIFICATIONS: This hygienic paper dispenser is fabricated of type 304, 18 gauge stainless steel #4 satin finish. Keyed lock declining hood. Unit fabricated of heavy gauge steel with bright chrome finish. Dispenser with spring tension for controlled distribution and self locking to prevent removal. MODEL 425 SINGLE MODEL 42 DOUBLE 445/44 Hygienic Paper Dispenser SPECIFICATIONS: Surface mounted hygienic paper dispenser fabricated for maximum strength, with heavy duty dye cast aluminum alloy. Spindle mounded from heavy duty, high impact ABS material, anti-theft spindle pins, to elluminate waste, pin located on bracket, stops spindle for controlled, distribution of paper. Rocking action returns tissue for next operation. MODEL 445 Single roll holder MODEL 44 Double roll holder -3/ (170mm) 9-1/2 (2mm) -1/2 (15mm) 10-1/2 (170mm) 1 (40mm) 11 (280mm) 7-3/ (19mm) 3-1/2 (89mm) 418/41 Towel Dispenser Top Loading SPECIFICATIONS: Surface mounted towel dispenser, fabricated of type 304, 22 gauge, stainless steel. All exposed surfaces #4 satin finish, piano hinge top dispense single fold or roll towels. Same as TW 500, but fabricated with 22 gauge, galvanized steel and white baked enamel finish. SUFFIX: "L" for cylinder lock 410/415 Towel Dispenser Front Loading SPECIFICATIONS: Surface mounted towel dispenser, fabricated of type 304, 22 gauge, stainless steel. #4 satin finish. Dispenser is designed for single fold or roll type towels. Same as TW510, but fabricated with 22 gauge, galvanized steel baked enamel finish. SUFFIX: "L" for cylinder lock 419 Multi - Fold Towel Dispenser SPECIFICATIONS: Surface mounted unit fabricated of type 304, 22 gauge, stainless steel. Tilt for front loading, level indicator and keyed lock. All exposed surfaces #4 satin finish. Dispense multi-fold or c-fold towels. SUFFIX: "L" for cylinder lock 444 Partition Mounted Multi-Roll Toilet Tissue Dispenser SPECIFICATIONS: Specifications: Auto-reserved dual rolls toilet tissue dispenser. Reserved roll automatically drop into dispensing place when bottom roll is depleted. Type # 304 stainless steel 22 gauge No. 4 satin finish. Theft resistant tumbler lock. Capacity: Four standard core toilet tissue rolls up to 5 1/2" (140mm) diameter Adjusts to partitions 3/4" (20mm) x 1 1/4" (30mm). tickness. 9-1/2 (19mm) Partition opening: 1/4" (311 mm width x 11 1/2 (292mm) height. 11-1/ (285mm) Reglable 3/(19mm) a 1-1/ (mm) 1 (35mm) -1/2 (15mm) (153mm) 443/443 Tph Hygienic Paper Dispenser Dual Roll 13-1/ (mm) SPECIFICATIONS: Dual roll dispenser, fabricated of type 304, 22 gauge stainless steel, flange fabricated of one piece seamless, type 304, 22 gauge with 3/4" (19mm) adjustable edge for different type of recessed. All exposed surfaces #4 satin finish. Molded polyethylene molded spindles. 1/4" (10mm) L x -1/4"(3mm) H x 3-3/8" (8mm) DP (153mm) 13 (0mm) 10-1/2 (2mm) 7-1/2 (190mm) 7 420 Eddystone Avenue, Toronto, ON, M3N 1H7, Ph : (41) 744-3039 E-mail:bandp@bellnet.ca, saferail@bellnet.ca 8

COMBINATION TOWEL WASTE UNIT COMBINATION TOWEL WASTE UNIT 500 Towel Dispenser And Receptacle 505 Towel Dispenser And Receptacle 520 Towel Dispenser And Receptacle SPECIFICATIONS: One piece door fabricated with #304 stainless steel #18 gauge, with continuous stainless steel piano hinge and two keyed locks. Self closing door fabricated with #304, gauge 20 stainless steel. Body container fabricated with galvanized steel, gauge 20 stain finish. Waste receptacle and removable container, fabricated with gauge 22, satin finish. galvanized steel. All exposed surfaces #4 satin finish. Unit dispense multifold, single fold or roll towels. 54-1/2 (1385mm) 51-3/8 (1305mm) 54-1/2 (1385mm) 51-3/8 (1305mm) Capacity: 7 litre (1.8 gal.) MODEL 520 RECESSED -3/8"(315mm) W x -3/4" (28mm) H x 5-1/2 " (140mm) DP. 2-3/ (80mm) (10mm) 30-1/2 (780mm) 30-1/2 (780mm) MODEL 520-100 SEMI-RECESSED -3/8"(315mm) W x -3/4 "(28mm) H x 3-1/2 " (90mm) DP MODEL 500-200 SURFACE- MOUNTED 525 Towel Dispenser And Receptacle 5-1/2 (140mm) SPECIFICATION: One piece door fabricated with #304 stainless steel #18 gauge, with continuous stainless steel piano hinge and two keyed locks. Self closing door fabricated with #304, gauge 20 stainless steel. Body container fabricated with galvanized steel, gague 20 stain finish.waste receptacle and removable container fabricated with galanized steel, gauge 22, fire proof. All exposed surface #4 satin finish. Unit dispense multi fold, single fold or roll towels. SPECIFICATION: One piece door fabricated with #304 stainless steel #13 gauge, with continuous stainless steel piano hinge and two keyed locks. Body container fabricated with stainless steel, gague 20 stain finish. Waste receptacle and removable container fabricated of 22 gauge satin finish, fire proof. All exposed surface #4 satin finish. Unit dispense multifold, single fold or c-fold towels. Capacity: 14 litre (5 gal) SPECIFICATIONS: One piece door fabricated with #304 stainless steel #18 gauge, with continuous stainless steel piano hinge and two keyed locks. Body container fabricated with galvanized steel, gauge 20 statin finish. Waste receptacle and removable container, fabricated with gauge 22, satin finish galvanized steel.. All exposed surfaces #4 satin finish. Unit dispense multifold, or c-fold towel. Capacity: litre (1. gal.) Capacity: 14 litre (5 gal.) MODEL 500 RECESSED - 3/8 (315mm) W x 54 x 1/2" (130mm) H x 4 1/2" (140mm) DP. MODEL 510-100 SEMI-RECESSED - 3/8 (315mm) W x 54 x 1/2", H x 2 ". MODEL 510-200 SURFACE- MOUNTED 4-1/2 (1180mm) 25 (35mm) 43-3/8 (1110mm) 5-1/2 (1110mm) MODEL 505 RECESSED - 3/8 " (315mm) W x 51-3/4" (1315mm) H x 4 " DP. MODEL 505-001 SEMI-RECESSED -3/8" (315mm) W x 51-3/4 " (1315mm) H x 2 " (50mm) DP. MODEL 505-200 SURFACE- MOUNTED 510 Towel Dispenser And Receptacle SPECIFICATION: One piece door fabricated with #304 stainless steel #18 gauge, with continuous stainless steel piano hinge and two keyed locks. Self closing door fabricated with #304, gauge 20 stainless steel. Body container fabricated with galvanized steel, gague 20 stain finish.waste receptacle and removable container fabricated with galanized steel, gauge 22, fire proof. All exposed surface #4 satin finish. Unit dispense multifold, single fold or roll towels. Capacity: 14 litre (5 gal.) MODEL 510 RECESSED - 3/8 " (315mm) W x 43-3/4" (1110mm) H x 5 1/2 " (140mm) DP. MODEL 510-001 SEMI-RECESSED -3/8 " (315mm) W x 43-3/4 " (1110mm) H x 3-1/2 " (90mm) DP. MODEL 510-200 SURFACE- MOUNTED MODEL 525 RECESSED -3/8"(315mm) W x -3/4" (28mm) Hx 4" DP. MODEL 525-100 SEMI-RECESSED -3/8"(315mm) W x -3/4 "(28mm) H x 2 " (50mm) DP MODEL 525-200 SURFACE- MOUNTED 50 Towel Dispenser SPECIFICATIONS: One piece door fabricated with #304 stainless steel # 18 gauge, with continuous stainless steel piano hinge and a keyed lock. Body container fabricated with gauge 20 satin galvanized steel. All exposed surfaces #4 satin finish. Unit dispense multifold, single or roll towels. MODEL 50 RECESSED -3/8"(315mm) W x -3/4" (28mm) H x 5 1/2 "(140mm) DP, MODEL 50-100 SEMI-RECESSED -3/8"(315rnm) W x -3/4 "(28mm) H x 3-1/2 (90mm) DP MODEL 50-200 SURFACE- MOUNTED 2-3/ (80mm) 2-3/ (80mm) (10mm) 5-1/2 (140mm) (10mm) 9 420 Eddystone Avenue, Toronto, ON, M3N 1H7, Ph : (41) 744-3039 E-mail:bandp@bellnet.ca, saferail@bellnet.ca 10

COMBINATION TOWEL WASTE UNIT COMBINATION TOWEL WASTE UNIT 540 Towel Dispenser And Receptacle (10mm) 2-3/ (80mm) Porte batante 5-1/2 (4mm) 23 (585mm) (100mm) (100mm) 5 (1370mm) SPECIFICATIONS: Dispenser and receptacle, fabricated of type # 304, stainless steel, # 4 satin finish. 1"(25mm) wide panel with return of 1/4 (mm),one piece construction paper towel dispenser door, is equipped with full-length stainless steel piano hinge and cylinder lock. Unit dispense multifold or c-fold towel. MODEL 540 RECESSED 1"(40mm) W x 54-3/4" (1375mm) H x 4 "(10mm) MODEL 540-100 SEMI-RECESSED 1"(40mm) W x 54-3/4 "(1375mm) H x 2" (50mm) MODEL 540-200 SURFACE- MOUNTED 17-3/1 (4mm) 40 Waste Receptacle SPECIFICATIONS: One piece door fabricated with # 304, stainless steel # 18 gauge with continuous stainless steel piano hinge and a keyed lock. Self closing flap door. Body container and waste receptacle fabricated with #20 gauge, satin galvanized steel. All exposed surfaces #4 satin finish. Capacity: litres (3.2gal). MODEL 40 RECESSED -3/8"(315mm) W x -3/4" (28mm) Hx 5-1/2"(140mm) DP. MODEL 40-001 SEMI-RECESSED -3/8"(315mm) W x -3/4 "(28mm) H x 3-1/2" (90mm) DP. MODEL 40-002 SURFACE- MOUNTED MODEL 45 RECESSED -3/8"(315mm) W x -3/4"(28mm) H x 4" DP. MODEL 45-001 SEMI-RECESSED -3/8"(315mm) W x -3/4"(28mm) H x 2" (50mm) DP MODEL 45-002 SURFACE MOUNTED Note: 40 FLAP DOOR 45 FLAP DOOR c/w FLAP DOOR 13/ / 11 Surface Mounted Waste Receptacle SPECIFICATIONS: Unit fabricated of type 304, 20 gauge stainless steel with hammed edges. All exposed surfaces #4 satin finish MODEL 13 Capacity: 23 litres (.2gall). 14" (358mm) W x 17"(4mm) h x "(152mm) DP. MODEL Capacity: 4 litres ( gal). 15" (381mm) W x22" (584mm) h x 8" (204mm) DP. MODEL 11 Capacity: 8 Iitres(l8gal). 15" (381mm) W x 23" (584mm) H x " DP. Height 31/30 Waste Receptacle For Floor SPECIFICATIONS: Unit fabricated of 22 gauge, satin galvanized. Steel and white baked enamel finish. The cover is removable and has two piano hinge self closing doors. MODEL31 " (810rnm)H. Capacity: 791 Litres (21 gai.) MODEL 30 44" (1115mm) H. Capacity: 1 Litres ( gal.) SPECIFICATIONS: Unit fabricated of type 304, #22 gauge stainless steel. The cover is removable and has two stainless steel piano hinge self closing doors. All exposed surfaces #4 satin finish. MODEL 31 " (810mm) H Capacity: 79 litres (21 gal) MODEL 30 44" (1115mm) H Capacity: 1 litres (gal.) 75/7 Waste Receptacle Flat Back SPECIFICATIONS: Unit fabricated of 22 gauge, satin galvanize. Steel and white. Bake enamel finish. The cover is removable and has a piano hinge self closing door. MODEL 75 SPECIFICATIONS: Unit fabricated of type 304, 22 gauge stainless steel. The cover is removable and has stainless steel piano hinge self closing door. All exposed surfaces #4 satin finish. Capacity: 30 litres (8 gall.) MODEL 7 Liner SUFFIX: "A".22 Galvanized liner (813mm) (10mm) 2-3/ (80mm) Depth Width Height (810mm) 4(11150mm) 5 (1370mm) Contenant detachable Porte batante exclus (300mm) 15 3/1 (383mm) 1 (35mm) 7 (813mm) 11 420 Eddystone Avenue, Toronto, ON, M3N 1H7, Ph : (41) 744-3039 E-mail:bandp@bellnet.ca, saferail@bellnet.ca

WASTE RECEPTACLE STAINLESS STEEL GRAB BAR 27 4-1/ (108mm) 5-5/8 (14mm) 900-1 910-1 1/4" 920-1 1/2" Stainless Steel Grab Bar 700 Sanitary Napkins Tampons Dispenser SPECIFICATIONS: One piece door with # 304,stainless steel # 18 gauge with continuous stainless steel piano hinge and two keyed locks. Body container fabricated with galvanized steel, gauge # 20, satin finish. Separate lock for money container 1 sanitary napkins and 20 hygienic tampons dispenser. REQUIRED MONEY:.25.50 FREE MODEL 700 RECESSED 13 3/4" W x 251/2" x 4 1/2 4 1/2 MODEL 700-001 SEMI-RECESSED 14 3/4 742 Napkin Disposal Surface Mounted 10 (254mm) 7 (178mm) MODEL 742 SPECIFICATIONS: fabricated with #304 stainless steel, gauge #22, satin finish # 4. Safety door with stainless steel piano hinge. Casting could have deodorant block bracket. MODEL 740 SPECIFICATIONS: fabricated with galvanized steel, #22 gauge, baked white enamel finish. MODEL 745 SPECIFICATIONS: With stainless steel shelf 9 (228mm) 725 Recessed Napkins Disposal SPECIFICATIONS: One piece door, fabricated with stainless steel, gauge 22 removable closing door. Stainless steel disposal. Body container fabricated with galvanized steel, gauge 22, with deodorant block bracket. All exposed surfaces #4 satin finish. MODEL 700 RECESSED " (152mm) W x 9-1/4" (235mm) H x 4" DP MODEL 700-200 SURFACE MOUNTED 7 (178mm) 11 (280mm) SPECIFICATIONS: Grab bar is fabricated with a tube of type 304, 18 gauge stainless steel, satin finish, Outside diameter available in 1"(25 mm); 1-1/4" (mm), 1-1/2" (38 mm), flanges are same stainless steel quality and heliarc welded to the tube, to form one structural unit. Distance from grab bar to wall: 1-1/2" (38 mm). Flanges available as, exposed, concealed or snap-on.. The bar could be smooth satin finish or penned. Snap Flange D Concealed Mounting C Exposed Mounting 15"(390mm) W x 25-5/8"(0rnm) H x 2"(50mm) DP 11 (280mm) 91000 Swing Up Stainless Steel Grab Bar 17-1/ (438mm) 15-3/8 (390mm) 17-1/ (438mm) 10-1/1 (255mm) 3-1/8 (79mm) (4) 13/ diameter 3/1 thick aluminum die casting with epoxy coated Holder toilet paper 750 Partition Mounted Napkins Disposal SPECIFICATIONS: Unit entirely fabricated with stainless steel, gauge 22. Stainless steel piano hinge door, self closing door, finger pull and removable waste bin. All exposed surfaces #4 satin finish. PARTITION OPENING: MODEL 750-100 SEMI RECESSED 11-1/2 " (290mm) W x 15-3/4" (400mm) H x 4" DP 13 (0mm) 751 Recessed Napkins Disposal 13 SPECIFICATIONS: One piece door, fabricated with stainless steel, gauge 22 removable closing door. Stainless steel disposal. Body container fabricated with galvanized steel, gauge 22, with deodorant block bracket. All exposed surfaces #4 satin finish. MODEL TW 0 RECESSED 11-1/2 " (290mm) W x 15-3/4" (400mm) H x 4" DP MODEL TW 3 SURFACE MOUNTED 29 (737mm) 1-1/4 diameter Specifications: Grab bar fabricated stainless steel 1 1/4" (30mm) diameter tubing. Thick aluminium die casting with white epoxy coated. Optional: Suffix "P" for Peened "H" for tolet paper Holder fabricated stainless steel. (8mm) from finoshed floor 91038 Swing Up Carrier HEAVY DUTY TUBE C/W 3/8 BASE PLATE & ¼ MOUNTING PLATE BEHIND THE WALL PLAIN SELF STANDING POWDER WHITE. 13 420 Eddystone Avenue, Toronto, ON, M3N 1H7, Ph : (41) 744-3039 E-mail:bandp@bellnet.ca, saferail@bellnet.ca 14

STAINLESS STEEL GRAB BAR STAINLESS STEEL GRAB BAR 910 91018 91030 9103 91048 9101 910 910 91042 91048A 20 20 20 1 1 1 910001 910002 910003 21 21 40 1-3/4 1 1 17 17 34 910 01 910 017 910 018 910 019 910 021 910 022 20 1 97 97 0 0 34 34 34 40 3 20 910 004 910 005 910 00 910 007 910 008 8-1/2 8-1/2 8-1/2 910 023 910 0 910 025 910 02 910 027 52 3 52 30 30 30 910 010 910 011 910 0 910 013 910 014 30 NOW WITH ADJUSTABLE FLANGE (FOR USE ON EITHER SIDE OF TOILET) 48 48 3 20 20 3 4 910 027 910 028 910 028 910 029 910 029 Heavy Duty Towel Bar 1 C - 1 C - 18 1 C - 1 C - 30 MODEL 910 003A 30 72 mm 4 20 28 28 25 34 20 30 CENTER OF FLANGE TO CORNER CENTER OF FLANGE TO CORNER 30 30 CENTER OF FLANGE TO CORNER CENTER OF FLANGE TO CORNER 30 20 30 72 mm 910 030 910 031 910 0 910 0 Architectural Specification Saferail # 900 = 1, 910 =1 1/, 920 = 1 1/2 15 420 Eddystone Avenue, Toronto, ON, M3N 1H7, Ph : (41) 744-3039 E-mail:bandp@bellnet.ca, saferail@bellnet.ca 1

SHELF HOOKS 10-5"/ 11-"/ 12-8" Stainless Steel Shelf SPECIFICATIONS: Shelf fabricated of type 304,18 gauge stainless steel, #4 satin finish. For added rigidity, front edge of shelf has a return of.375(10mm) corners polished and heliarc welded. MODEL TW 0 2 (51mm) 5 (7mm) Optional MODEL LENGTH 1" (40mm) 18" (453mm) " (10mm) 30" (72mm) 3" (914mm) Note: Other sizes available up on special request. 1040 Mop Holder 10 11 1350 SPECIFICATIONS: Mop holder, fabricated of type 304, 20 gauge stainless steel #4 satin finish. Complete with self locking rubber clips. Optional MODEL CLIPS LENGTH 1040 1 3" (70mm) 1041 2 1"(40mm) 1042 " (0mm) 1043 43 " (915mm) 1044 54 "(118mm) 1045 5 "(1425mm) 1050 Hooks Plate SPECIFICATIONS: Mop holder, fabricated of type 304, 20 gauge stainless steel #4 satin finish. Complete with self locking rubber clips. 2-1/2 (4mm) 8 (203mm) Optional Optional 1000 Janitorial Shelf SPECIFICATIONS: Shelf fabricated of type 304, 18 gauge stainless steel #4 satin fin- ish, self locking rubber clips, hooks fabricated of 14 gauge stainless steel. Mop strip of.250(mm) stainless steel. MODEL CLIPS LENGTH 1050 1 1" (25mm) 1051 3 2" (0mm) 1052 4 3" (915mm) 1053 5 4" (118mm) 1054 5" (1425mm) MODEL CLIPS HOOKS LENGT 1000 3 2 30" (72mm) 1001 4 3 3" (914mm) 1002 5 4 42" (107mm) 1003 5 48" (20mm) 1351 10/10b 11/11b Clothing, Hooks, Stainless Steel Wall Mounted SPECIFICATIONS: The 3 models fabricated of type 304 stainless steel and back plate fabricated of 1 gauge stainless steel. MODEL: 10 B single hook - bright finish MODEL: 10 single hook - satin finish MODEL: 11 B double hook - bright finish MODEL: 11 double hook - satin finish. 1353 B Hat And Coat Hook SPECIFICATIONS: Concealed hatt andcoat hook, fabricated of type 304 stainless steel. Edges are rounded to form a radius. Hook projects 3-1/2" (9mm) from the wall and provided with concealed mounting plate with lock screw. MODEL: B Bright finish MODEL: Satin finish 134 1350/1351 /1353 Clothing Hook Heavy Duty SPECIFICATIONS: The 3 models fabricated of type 304 stainless steel and back plate fabricated of 1 gauge stainless steel. MODEL: 1350 Fabricated with forged solid copper Chrome plated Exposed mounting MODEL: 1351 Fabricated with forged solid copper Chrome plated Concealed mounting MODEL : 1353 Coat Hook and Bumpper Project 3`` from wall exposed mounting 135 134, 135 Clothing Hooks SPECIFICATIONS: Concealed clothing hooks, fabricated of zamac chrome plated 2-1/4" (55mm) from wall and provided with concealed anchor plate. MODEL 134 single hook MODEL 135 double hook. 17 420 Eddystone Avenue, Toronto, ON, M3N 1H7, Ph : (41) 744-3039 E-mail:bandp@bellnet.ca, saferail@bellnet.ca 18

HYGIENIC PAPER ROLL HOLDER TOWEL AND SHOWER 1305 Hygienic Paper Roll Holder 1302 Soap Dish Or Tumbler Holder 1300 Soap Dish And Gbab Bar STAINLESS STEEL SPECIFICATIONS: MODEL 1305 Hygienic paper roll holder fabricated of type 304, 22 gauge, stainless steel, polished to # 4 satinf finish and chrome plated plastic roller. MODEL 1302 Recessed soap dish or tumbler holder fabricated of type 304, 22 gauge stainless steel, with exterior edge to #4 satin finish. MODEL 1300 Recessed soap dish and grab bar fabricated of type 304, 22 gauge stainless steel, bright finish. 5-1/4" (134mm) W x 5-1/4" (134mm) H x 2"(50mm) DP. Suffix "4" polished satin finish. 10/10b/11/11b Clothing, Hooks,stainless Steel Wall Mounted SPECIFICATIONS: Soap dish, fabricated of one piece seamless, of type304, 22 gauge stainless steel. Unit has 2 drain holes. Support arm and flange fabricated of 22 gauge stainless steel with a concealed mounting bracket. bright finish satin finish 137 Tooth Brush And Tumble Holder Stainless Steel 11/11b /13/13b Hygienic Roll Paper Holder Stainless Steel SPECIFICATIONS: Hygienic roll paper holder, fabricated of 22 gauge stainless steel, Back plate fabricated of 1 gauge stainless steel. Unit polish for bright finish and provided with a chrome plated roller. 3A MODEL: 11B SIMPLE bright finish 3A MODEL: 11 SIMPLE satin finish 3B MODEL-13B, DOUBLE bright finish 3B MODEL: 13 DOUBLE satin finish 15/15b Towel Bar Stainless Steel SPECIFICATIONS: Towel bar fabricated of 3/4" (19mm) square stinless steel tube. Support arms and edges fabricated of 22 gauge, stainless steel. Support arms and concealed mounting plate provided with steel lock screw. MODEL: TW 915 bright finish MODEL: TW 9154 satin finish Sizes available 18" " 30" SPECIFICATIONS: Tooth brush and tumbler holder fabricated of one piece seamless, 22 gauge type 304 stainless steel, provided with tooth brush holes. Support arm and flange fabricated of 22 gauge, stainless steel, with a concealed mounting bracket. Suffix: "99" theft resistant spindle. 5 130 Hygienic Paper Double Roll Holder Stainless Steel SPECIFICATIONS: Hygienic paper double roll holder fabricated of type 304, 22 gauge, stainless steel, bright polish and chrome plated plastic rollers. 11-1/4" (300mm) W. x 5-1/4" (134mm) H x 2"(50mm) DP. Suffix "4" polished satin finish. 130 1381 /1382 Shower Curtains STANDARD SIZES 30" (72mm) x 78" (1982mm) 3" (915mm) x 78" (1982mm) 42" (1025mm) x 78" (1982mm) 72" (1829mm) x 72" (1829mm) Other sizes available in stock MODEL: 1381 SHOWER CURTAINS Light vinyl, fungicide treated (white only) MODEL: 1382 SHOWER CURTAINS I l.oz. vinyl laminated, flame, bacteria and mildew resistant ( white only). 1310 Heavy Duty Soap Dish Stainless Steel SPECIFICATIONS: Recessed heavy duty soap dish fabricated of one piece 14 gauge stainless steel, polished for a bright finish., exterior edge, 18 gauge stainless steel. 1/4" (172mm) W. x 3-3/4" ( 9mm) H x 3 ½`` (7mm) DP. Suffix "4" polished satin finish. 1375-5/1377-5 Shower Curtain Rod Stainless Steel STANDARD SIZES 3" (92mm) 0" (1525mm) 72" (1830mm) MODEL 1375-5 Very resistant, shower curtain rod, fabricated of type 304,18 gauge stainless steel tubing, 1" (25mm) diameter, polished #4 satin finish edges have 3" (7rmm) diameter. MODEL: 1377-5 Very resistant, shower curtain rod, fabricated of type 304, 18 gauge stainless steel tubing, 1-1/4" (mm) diameter, polished #4 satin finish, edges have 3" (7mm) diameter. CHROME 1375-1'' 1377-1 ¼'' 13 Heavy Duty Soap Dish And Grab Bar Stainless Steel SPECIFICATIONS: Heavy duty soap dish and grab fabricated of one piece 14 gauge stainless steel, exterior edge 18 gauge stainless steel, grab bar 3/1 (5mm) stainless steel. All exposed surfaces are polished for a bright finish. -3/4" (172mm) W. x 3-3/4" ( 9mm) H x 3"(7mm) DP. Suffix "4" polished satin finish. 1390-3/1390-3l Shower Curtain Hooks STANDARD SIZES 3" (92mm) 0" (1525mm) 72" (1830mm) MODEL 1390-3 Shower curtain hook, steel, zinc and chromate finish, for use on 1" (25mm) and 1 1/4" (30mm) diameter shower curtain rods. MODEL: 1390-3LS Shower curtain hook type 304 stainless steel for use on 1" (25mm) and 1 1/4" (30mm) diameter shower curtain rods. Opening: 1 5/1" (mm). 1379 Hold Back and Chain bright finish satin finish 1340/1340b/1340s/1341r Towel Supply Shelf With Drying Rod SPECIFICATIONS: Surface mounted towel supply shelf with drying rod, fabricated of type 304, 22 gauge stainless steel, polished to #4 satin finish. Shelf and drying rod fabricated of 3/8" (9mm) diameter, stainless steel tube. Support arms and flange equipped with concealed stainless steel mounting plate and lock screw. ( R= Round, S= Square ) MODEL: 1341R-18 Towel supply shelf with drying rod. 18" (457mm) bright finish MODEL: 1340S-18 same as satin finish MODEL: 1340R- Towel supply shelf with drying rod." (10mm) bright finish MODEL: 1340S- Same as satin finish 1103 Air Freshner SPECIFICATIONS: Chrome plated airfreshner fabricated of chrome plated steel. MODEL 1104 STAINLESS STEEL 4 3A 458 Cup Dispenser Tw 947 A SPECIFICATIONS: Cup dispenser fabricated of type 304, 20 gauge stainless steel, polish for a satin finish SPECIFICATIONS: Cup dispenser fabricated of 20 gauge galvanized steel, white baked enamel finish. Dispenser is wall mounted with concealed mounting supports and refill slot. Unit can contain 4 oz. paper gobelet, front loading. 2 3B 300 Wall Ashtray Stainless Steel SPECIFICATIONS: Rectangular wall ashtray fabricated of stainless steel. Theft proof flip cover interior receptacle fabricated of galvanized steel. DIMENSION: 8" x 4" x 5" (height) (20,3 x 10,2 x,7 cm.) 1 19 420 Eddystone Avenue, Toronto, ON, M3N 1H7, Ph : (41) 744-3039 E-mail:bandp@bellnet.ca, saferail@bellnet.ca 20

AIR DRYERS/ SHOWER STEATS Hand And Hair Dryers Push Button With Adjustable Timer P Hand Dryers Automatic Cover, zinc die cast with heavy duty baked polyester. Voltage: 100V, 0V, 208V, 0V, 277V Warranty: 10 years Specifications: Tubing frame is fabricated of 1" (25mm) 18 gauge type 304 satin stainless steel. Mounting flages are 11 gauge fabricated of type304 satin stainless steel. Bottom support braket cover and back plate are 1 gauge type 304 satin stainless steel, and the spring is made of 20 gauge satin stainless steel. Shower seat is designed to be raised up and out of the way when not use, spring in bracket is designed to hold seat in a upright position. Optional suffix: "T Teak wood slats 3" (75mm) x 3/8 (10mm) "P" Phenolic slats are 3" (75mm) x 1/2" (13mm) thick. Hand Dryers Automatic With the air recirculation, this dryer consumes less energy than conventional dryers. Cover injection molded polycarbonate Voltage: 0V, 208V, 0V. Warranty: 10 years 35P Hand And Hair Dryers Automatic Cover, cast iron, porcelain enamelled is acid resistant and scratch proof. Voltage: 100V, 0V, 208V. 0V, 277V. Warranty: 10 years Specifications- Tubing frame is fabricated of 1" ( 25mm) 18 gauge type 304 satin stainless steel. Mounting flages are 11 gauge fabricated of type 304 satin stainless steel. Bottom support braket cover and back plate are 1 gauge type 304 satin stainless steel, and the spring is made 20 gauge satin stainless steel. Shower seat is designed to be raised up and out of the way when not use, spring in bracket is designed to hold seat in a upright position. Optional suffix: T Teak wood slats 3" (75mm) x 3/8" (10mm) P Phenolic slats are 3" (75mm) x 1/2" (13mm) thick. 21 420 Eddystone Avenue, Toronto, ON, M3N 1H7, Ph : (41) 744-3039 E-mail:bandp@bellnet.ca, saferail@bellnet.ca