INTRODUCTION The Graduate Recessed is the latest addition to our Graduate range of luminaires. Offering the direct/indirect gull-wing aesthetic common to many traditional fluorescent luminaires, the Graduate Recessed has the added benefit of LED technology. Using the latest Lumileds LEDs we are able to offer the Graduate Recessed in a wide range of lumen outputs, 600 600 and 1200 600 options, recessed or semi-recessed versions and pull up or lay in housings with long LED design life providing excellent efficiency with minimal maintenance. The 2861llm luminaire lumen 600 600 and the 5722llm luminaire lumen 1200 600 variants fall below the 3000 candela limit and are therefore suitable for installation in applications with VDUs in use such as schools, hospitals and universities. This performance is complimented with a wide range of options allowing the Graduate Recessed to be tailored to suit most applications, including emergency in standard, self test and autotest options and dimming in analogue, switch dimming, DALI dimming, DSI and white tunable. All luminaires are supplied fully flush as standard, however the central optic is fully adjustable and can be lowered to a semi recessed position during installation if required. We are also able to offer this range with air handling, a unique feature amongst our LED modular range at present. APPLICATION Canteen Commercial/Offices Corridor Education Healthcare/Social Housing T: 01747 858100 E: sales@dextralighting.co.uk Page 1 of 9
Hotel/Leisure Industrial/Manufacturing Office Retail Transport Warehouse/Storage SPECIFICATION Construction Injection moulded end caps with adjustable optic for both recessed and semi recessed variants. Steel housing powder painted white. Precoat aluminium white gull-wing reflectors. Prismatic opal extruded diffuser. Performance The 2861llm lumen (600 600) and the 7132llm lumen (1200 600) variants fall below the 3000 candela limit and are suitable for use in offices and classrooms. Although lumen packages will always remain the same, lumens per watt will only improve in line with developments in LED chip technology. This offers improved performance and greater efficiency. For further information about the current generation please contact the Dextra Technical Team on 01747 858100. Philips Lumileds LM80 verified: 90% LED lumen maintenance at 60,000 operating hours. Philips Lumileds LM80 verified: B10 10% of LED s will exceed 10% lumen depreciation at 60,000 operating hours. Standard Deviation Colour Match 3 Step Macadam s Ellipse. L2 compliant 82Llm/w*. ECA compliant*. *specific variants only. Control All lumen outputs can be offered with HFR dimming, DALI dimming and Switch dimming. White Tunable, Lumen outputs vary, please contact our sales department for details Emergency All variants of the Graduate Recessed can be offered with integral 3 hour emergency. Installation Available in both pull up and lay in options to suit a range of ceiling types. Please contact our Technical Department for advice on suitability for concealed grid ceiling systems. T: 01747 858100 E: sales@dextralighting.co.uk Page 2 of 9
IMAGES Product Images Project Images T: 01747 858100 E: sales@dextralighting.co.uk Page 3 of 9
T: 01747 858100 E: sales@dextralighting.co.uk Page 4 of 9
TECHNICAL GRDP 600x600 GRDR 600x600 T: 01747 858100 E: sales@dextralighting.co.uk Page 5 of 9
GRDP 1200x600 GRDR 1200x600 WARRANTY All Dextra products are supplied with a 12 month warranty for any defect that may occur with the product during this time. Any defect will either be repaired on site free of charge or the defective product may be replaced on a chargeable basis and credit given against defective product returned. The course of action taken will be at our discretion and dependent on the nature of the defect. The control gear within our high frequency and LED luminaires is further underwritten by our suppliers for a period of up to 5 years in total from the time of purchase. This comprises labour and parts for the first 3 years and free of charge components only for the final 2 years. PROTEC LED FR 8W GU10 luminaires and all Emergency LED ranges such as LED 3, EXI, HBE, OAT, OEZ, AME, OEH and TWS * are exempt from the 5 year warranty and are supplied with 1 year warranty only. PROTEC LED COB luminaires are supplied with a two year warranty for replacement luminaires only. All warranties are subject to correct use of the product and will be invalidated by misuse, for example incorrect installation or unsuitable environmental conditions. It is the duty of the customer to ensure that all relevant tests have been carried out prior to requesting site visits or replacement products, for example replacement of lamps, commissioning of sensors and inspection of external wiring. In the event that no defect is found with the product our costs for attending site will be recharged to the customer and credit will not be issued against returned products. No consequential losses incurred resulting from any defect with our product will be reimbursed. Consumable commodities such as lamps, starters and batteries are excluded from these warranty terms. Batteries are supplied with a twelve month warranty only. 5 year warranty on LED product ranges is subject to a maximum of 4000 operating hours per year and only applies where T: 01747 858100 E: sales@dextralighting.co.uk Page 6 of 9
failures exceed the component manufacturers expected failure rate and lumen depreciation. If you require any assistance with regards to our products please do not hesitate to contact our Customer Services department on 01747 858100. *The LED4 Emergency LED range is supplied with a three year battery warranty and 5 year luminaire warranty. ORDER CODES Luminaire Codes Code Description Circuit Wattage Llm/w GRDR L19 OPTPA C84 Graduate LED, Lay In, 600x600mm, 1900 Lumen, Opal TPA Diffuser, Colour 84 (ECA) 15.9w 88 GRDR L24 OPTPA C84 Graduate LED, Lay In, 600x600mm, 2400 Lumen, Opal TPA Diffuser, Colour 84 (ECA) 18.2w 97 GRDR L38 OPTPA C84* Graduate LED, Lay In, 600x600mm, 2861llmOutput, Opal TPA Diffuser, Colour 84 (ECA) 25.9w 110 GRDR L48 OPTPA C84 Graduate LED, Lay In, 600x600mm, 3614llmOutput, Opal TPA Diffuser, Colour 84 (ECA) 31.5w GRDR L57 OPTPA C84 Graduate LED, Lay In, 600x600mm, 4292llm Output, Opal TPA Diffuser, Colour 84 (ECA) 39.3w 109 GRDR L76 OPTPA C84 Graduate LED, Lay In, 600x600mm, 5722llmOutput, Opal TPA Diffuser, Colour 84 (ECA) 49.8w GRDR 126 L38 OPTPA C84 Graduate Led, Lay In, 1200x600mm, 2861llm Output, Opal TPA Diffuser, Colour 84 (ECA) 25.9w 110 GRDR 126 L48 OPTPA C84 Graduate Led, Lay In, 1200x600mm, 3614llm Output, Opal TPA Diffuser, Colour 84 (ECA) 31.5w GRDR 126 L76 OPTPA C84* Graduate LED, Lay In, 1200x600mm, 5722llmOutput, Opal TPA Diffuser, Colour 84 (ECA) 50.3w 113 GRDR 126 L96 OPTPA C84 Graduate LED, Lay In, 1200x600mm, 7132llmOutput, Opal TPA Diffuser, Colour 84 (ECA) 60.7w 117 GRDP L19 OPTPA C84 Graduate LED, Pull Up, 600x600mm, 1900 Lumen, Opal TPA Diffuser, Colour 84 (ECA) 15.9w 88 GRDP L24 OPTPA C84 Graduate LED, Pull Up, 600x600mm, 2400 Lumen, Opal TPA Diffuser, Colour 84 (ECA) 18.2w 97 GRDP L38 OPTPA C84* Graduate LED, Pull Up, 600x600mm, 2861llm Output, Opal TPA Diffuser, Colour 84 (ECA) 25.9w 110 GRDP L48 OPTPA C84 Graduate LED, Pull Up, 600x600mm, 3614llm Output, Opal TPA Diffuser, Colour 84 (ECA) 31.5w GRDP L57 OPTPA C84 Graduate LED, Pull Up, 600x600mm, 4296llm Output, Opal TPA Diffuser, Colour 84 (ECA) 39.3w 109 GRDP L76 OPTPA C84 Graduate LED, Pull Up, 600x600mm, 5722llm Output, Opal TPA Diffuser, Colour 84 (ECA) 49.8w GRDP 126 L38 OPTPA C84 Graduate Led, Pull Up, 1200x600mm, 2861llm Output, Opal TPA Diffuser, Colour 84 (ECA) 25.9w 110 GRDP 126 L48 OPTPA C84 Graduate Led, Pull Up, 1200x600mm, 3614llm Output, Opal TPA Diffuser, Colour 84 (ECA) 31.5w GRDP 126 L76 OPTPA C84* Graduate LED, Pull Up, 1200x600mm, 5722llm Output, Opal TPA Diffuser, Colour 84 (ECA) 50.3w 113 GRDP 126 L96 OPTPA C84 Graduate LED, Pull Up, 1200x600mm, 7132llm Output, Opal TPA Diffuser, Colour 84 (ECA) 60.7w 117 Lay In Pull Up *Compliant with BSEN 12464 3000 candela limit. Dimming Options Code Description H High Frequency Dimming (Analogue 1-10v) S Switch Dimming A Digital Addressable Lighting Interface (DALI) D Digital Dimming (DSI) WT White Tunable, Lumen outputs vary, please contact our sales department for details Please click here for full details on our white tunable offer Dimming Options Code Description RLI Dextra Reacta-Link System T: 01747 858100 E: sales@dextralighting.co.uk Page 7 of 9
RLS Reacta-Link daylight and presence detection sensor STR Reacta Link Emergency Please click here for full details on our wireless controls. Emergency Code Description E3 3 Hour Integral Emergency ST3 Self Test AT3 Autotest Emergency STR Emergency Reacta-Link Miscellaneous Code Description AH25 Air handling 25 litres per second NL Night Light C34998 & C3793 1M 6 Pole Blue / Black Lead and Besa Connection Plate C34997 & C3792 1M 4 Pole Lead and Besa Connection Plate C34996 & C3791 1M 3 Pole Lead and Besa Connection Plate
Graduate LED (Pull-up and Lay-in) Installation 230-240V / 50-60Hz IP20 IK00 1 5.0 Installation for Pull-up version WARNING - THIS LUMINAIRE MUST BE EARTHED This luminaire has been tested and is manufactured to comply with BS EN 60598 : specification for general requirements and tests. It should be installed by a suitably qualified person in accordance with IEE. CAUTION: there is a potential risk of electric shock from the LED boards when the product is operational with the cover removed. NOTE: INSTALLATION AND OPERATION OF THE LUMINAIRE BEYOND ITS SCOPE OF SUPPLY WILL INVALIDATE THE WARRANTY. 2 Pre-install the pull-up bracket/ lumafix (x4) as shown. Reflector Remove both reflectors. Lumafix bracket 3 4 Adjuster the diffuser to the position (higher or lower) as required. Typical celling grid Higher position Place the luminare in the celling, adjust the Lumafix positions as needed. Lower position 5 6 Wire the mains cable to the Terminal Block. Replace the reflectors. Installation complete. DIL490005_B Installation for Layin version Do steps 1 and 3. Place the luminaire in the celling grid. Then do step 5. 04/01/16