LBRP6 CYLINDER SURFACE CYLINDER SURFACE WITH CROSS BAFFLE /cylinders Shown with cross baffle Power and beauty are both in play with our sleek architectural cylinders. The provides industry-leading performance for any ceiling type, with more lumen packages and dimming options than ever before. The full family platform includes a variety of downlight and wallwash distributions, USAI s patented color technologies, and pendant and surface-mount solutions. FEATURES Powerful performance in a full range of lumen packages and beamspreads in a variety of standard or custom colors mount design conceals mounting hardware and provides seamless finish to ceiling surface. Optional cross baffle extension can be added on for additional glare control Remote driver options and emergency battery packs for ease of service BEVELED CYLINDER DOWNLIGHT PERFORMANCE DATA LED COLOR CHOICES DELIVERED* PERFORMANCE: Dimming Wattage: 9W 12W 16W 24W 33W 36W 16W 32W 16W 32W Source Lumens: 11 00 1725 2400 3025 41 1275 12 2075 Performance Lumens Per Watt: 93 86 86 80 71 0 69 61 66 53 Delivered Lumens: 775 25 75 1925 2400 34 10 18 9 1600 Cross Baffle Performance Lumens Per Watt: 74 73 74 68 60 89 59 53 51 43 Delivered Lumens: 675 875 1175 1625 20 29 9 1600 825 75 *Performance data based on 3000K, CORRELATED COLOR TEMPERATURE MULTIPLIER CHART Dimming 2200K 2700K 3000K 30K 4000K 2700K 3000K 30K 2200K 2700K 3000K 30K 4000K 00K 6000K Color Rendering Index: 80+ 80+ + + + 80+ 80+ 80+ + + 80+ 80+ 80+ 80+ 80+ 80+ 80+ 80+ 80+ Multiplier for Lumen Output: 0.72 0.94 0.78 1.00 0.80 1.00 1.06 0.93 0.74 1.00 0.80 1.05 0.92 0.97 1.00 1.03 1.05 1. 1. Page 1 CORRELATED COLOR TEMPERATURE MULTIPLIER Covered by US Patents: 8,581,520, 8,456,9 and 8,742,695. Patents pending. USAI,,, Color Harmony and
LBRP6 DIMENSIONS BEVELED CYLINDER BEVELED CYLINDER WITH CROSS BAFFLE EXTENSION 6 6 Finish -7/8 FOR USE WITH RECESSED JUNCTION BOXES Finish -7/8 2 Inner Front Cap Bevel Finish 6" Ø Mount Inner Front Cap Bevel Finish 6" Ø Mount TRIM FINISH OPTIONS Custom (example) Custom colors also available Page 2 Covered by US Patents: 8,581,520, 8,456,9 and 8,742,695. Patents pending. USAI,,, Color Harmony and
HOW TO SPECIFY LBRP6 with Integral Driver Specify fixture part number. All boxes must be filled in to correctly order. INTEG DRIVER ORDERING INFORMATION LBRP6 Wattage Inner Front Cap Finish Optional Cross Baffle Finish Length LED Color Temperature Beam Lens Mounting LBRP6 LBRP63 LBRP64 09-C3 9W LED 12-C3 12W LED 16-C3 24-C3 24W LED 33-C3 33W LED 36-E1 36W LED 16-WG2 32-WG2 16-CSD1 32-CSD1 Anodized (1) F2 2 Cross Baffle Extension (1) (Leave Blank if no Cross Baffle is needed) 1 F2 Cross Baffl e is not available in fi nish Anodized OAL 22KS 2200K, (2) 27KS 2700K, 30KS 3000K, 35KS 30K, 40KS 4000K, 27KH 2700K, 30KH 3000K, Dimming 2722KS - 2700K-2200K, 3022KS - 3000K-2200K, 3522KS - 30K-2200K, 2722KH - 2700K-2200K, 3022KH - 3000K-2200K, 6022KS 6000K-2200K, Tunable Light beam (2) 25 25 beam beam beam 30 30 beam beam 40 40 beam 60 60 beam 80 80 beam SOC Solite Clear (provided standard) SOF Solite BOF Borosilicate AS61 Linear Spread Mount Order Information Continued Below INTEG DRIVER ORDERING INFORMATION (continued) Voltage Dimming Driver Color Control 120V 277V 120V 347V For use with 120V or 277V D4 Lutron Hi-Lume 1%, 3-wire/ECO D4E Lutron 5 ECO, 5% (3, 5, 6) D4H Lutron H ECO, 1% Fade (3, 5, 6) D6A EldoLED 0-V, 0.1% D6B EldoLED 0-V, 0.1% D6E EldoLED 0-V, 1% (provided standard) D6F EldoLED 0-V, 1% D7 EldoLED DALI, 0.1% For use with 120V only D3 Lutron Hi-Lume 1%, 2-wire, 120V only (6) D19 Phase dimming 1%, 120V only (2, 3, 4, 5, 6) For use with 347V only D15 0-V dim, 1%, 347V only (5, 6) V 0-V signal transitions color temperature from 6000K to 2200K (7) 3 Not available for 9W 4 Not available for 33W 5 Not available for 6 Not available for 7 Required for Color Select only Page 3 Covered by US Patents: 8,581,520, 8,456,9 and 8,742,695. Patents pending. USAI,,, Color Harmony and
HOW TO SPECIFY LBRP6 with Remote Driver 1. Specify fixture part number. All boxes must be filled in to correctly order. ORDERING INFORMATION LBRP6 RM Wattage Inner Front Cap Finish Optional Cross Baffle Finish Length LED Color Temperature Beam Lens Mounting Remote Power LBRP6 LBRP63 09-C3 9W LED 12-C3 12W LED 16-C3 24-C3 24W LED 33-C3 33W LED 36-E1 36W LED 16-WG2 32-WG2 Anodized (1) F2 2 Cross Baffle Extension (1) (Leave Blank if no Cross Baffle is needed) 1 F2 Cross Baffl e is not available in finish Anodized OAL 22KS 2200K, (2) 27KS 2700K, 30KS 3000K, 35KS 30K, 40KS 4000K, 27KH 2700K, 30KH 3000K, Dimming 2722KS - 2700K-2200K, 3022KS - 3000K-2200K, 3522KS - 30K-2200K, 2722KH - 2700K-2200K, 3022KH - 3000K-2200K, beam (2) 25 25 beam beam beam 30 30 beam beam SOC Solite Clear (provided standard) SOF Solite BOF Borosilicate AS61 Linear Spread Mount RM Remote Power (Specify in table below) USAI Power Must Be Specified 2. Specify Remote Power RPC-01 Remote Power Wattage Voltage Remote Dimming Type and Level Remote Emergency Option RPC-01 Remote Power 09C3 9W LED 12C3 12W LED 16C3 24C3 24W LED 33C3 33W LED 36E1 36W LED 16WG2 32WG2 UNV 120V - 277V 120V 120V Only D4 Lutron 3-wire/ECO, 1% D4E Lutron 5 ECO, 5% (3, 5) D4H Lutron H ECO, 1% Fade (3, 5) D6A EldoLED 0-V, 0.1% D6B EldoLED 0-V, 0.1% D6E EldoLED 0-V, 1% D6F EldoLED 0-V, 1% D7 EldoLED DALI, 0% D8 EldoLED DMX, 0% (4) D3 Lutron 2-wire, 1% D19 Hatch Phase 2-wire, 1% (2, 3, 4, 5) 3 Not available for 9W 4 Not available for 33W 5 Not available for EM5 EM battery requires remote enclosure by others, minimum size 11 L x 6.75 W x 3.25 H Page 4 Covered by US Patents: 8,581,520, 8,456,9 and 8,742,695. Patents pending. USAI,,, Color Harmony and
LBRP6 BEVELED CYLINDER SURFACE SPECIFICATIONS FIELD REPLACEABLE LED LIGHT ENGINE Light engine is serviceable without tools. All USAI Lighting light engines feature industry-leading color consistency. FIELD REPLACEABLE DRIVER 0-V, 0%-1% D6E solid state electronic constant current dimming driver with a high power factor provided standard and sources 2mA. Specify 120V or 277V. Driver complies with IEEE C62.41 surge protection. Some on-time delay may be experienced depending on control system used. DIML15 and DIML6 dimming drivers source 2mA. REMOTE LOCATION DRIVER If a remote dimming driver is required, specify RM in the fixture part number and proceed to the RP table to complete the dimming driver specification. All remote power supplies must be clearly specified in the RP table, with one remote power supply required per fixture. Remote power supplies require enclosures by others that meet local codes and must be located in an accessible service panel within 0ft of the light fixture; see table below for coordination of enclosure sizes. All dimming drivers comply with IEEE C62.41 surge protection. REMOTE LOCATION EMERGENCY Remote emergency battery IOTA ILB-CP05 provides 5W to one fixture for minutes. Remote power supplies with EM option require an enclosure by others with minimum size of 11 L x 6.75 W x 3.25 H that meets local codes. Emergency battery remote power supplies cannot be located any more than feet from light fixture. BEVELED CYLINDER REMOTE POWER SUPPLY REQUIREMENTS AND WIRING DIAGRAM Minimum Enclosure Size Required (by others) Remote Power Dimming Option Wire Gauge Required* RP Only RP with EM Option** UNV-D4 Lutron 3-wire/ECO, 1% RPC-01-09C3 RPC-01-12C3 RPC-01-16C3 RPC-01-24C3 RPC-01-33C3 RPC-01-36E1 RPC-01-16WG2 RPC-01-32WG2 UNV-D4E Lutron 5 ECO, 5% (2) 14/12 UNV-D4H Lutron H ECO, 1% fade (2) UNV-D6A EldoLED 0-V, 0.1% UNV-D6B EldoLED 0-V, 0.1% UNV-D6E EldoLED 0-V, 1% 18/16 6.25 L x 4 W x 2 H 11 L x 6.75 W x 3.25 H UNV-D6F EldoLED 0-V, 1% UNV-D7 EldoLED DALI, 0% UNV-D8 EldoLED DMX, 0% (3) 120V-D3 Lutron 2-wire phase, 1% 14/12 120V-D19 Hatch 2-wire phase, 1% (1, 2, 3, 4, 5) 14/12 5.75 L X 2.625 W X 2 H 1 Not available for 36W 4 Not available for 2 Not available for 9W 5 Not available for 3 Not available for 33W * Wire gauge 14/12 = Maximum distance from light fixture to remote power supply is 0 using 12 gauge wire, using 14 gauge wire. * Wire gauge 18/16 = Maximum distance from light fixture to remote power supply is 0 using 16 gauge wire, using 18 gauge wire. ** Emergency battery remote power supplies cannot be located any more than feet from light fixture. HOMERUN USE FOR WIRING WIRING FIXTURES REQUIRED MDF02M DP02 MDF04M DP04 MDF06M MDF08M DP06 DP08 RP2 RPC REMOTE + POWER - SUPPLY A INPUT WIRES DIMMING COMPATIBILIT ATIBILITY SEE SHEET DIMMING FOR DETAILS COMPATIBILTY SHEETS FOR DETAILS + - FIXTURE BODY 6 Ø extruded aluminum body available in a variety of powder coated paint finishes or an anodized satin nickel finish. Custom colors also available (provide #). FRONT CAP Standard cylinder is provided with snap in diecast 1 regressed bevel assembly in front cap finish specified. If cross baffle option is specified, a 2 extended front cap is provided retaining cast cross baffle; the exterior of the 2 cross baffle extension will be provided in a painted finish matching exterior body finish specification, and the interior cross baffle (including side walls, regressed bevel and cross baffle) will be provided in inner front cap finish specified. Cross Baffle is not available in Satin Nickle finish. Both standard and cross baffle front caps retain a solite glass lens (other lenses optionally available). MOUNTING Hardware included for mounting to 4 octagonal junction box. No visible hardware, tooless mount. 6 Ø x 1/2 round canopy. FIXTURE WEIGHT 8 lbs Page 5 Covered by US Patents: 8,581,520, 8,456,9 and 8,742,695. Patents pending. USAI,,, Color Harmony and
LBRP6 BEVELED 2.1 CYLINDER SURFACE SPECIFICATIONS (continued) WARRANTY Based on IEA LM80-2008, has a,000 hour rated life at 70% lumen maintenance (L70). USAI Lighting Warranty covers replacement parts for 5 years from date of shipment. Warranty is void if USAI is used with any power supply other than that which is provided by USAI. LISTINGS Dry/Damp/Wet. NRTL/CSA-US tested to UL standards. IBEW union made. Energy Star Qualified under Luminaires Specification V2.0. Please see Energy Star website for exact model #s included in the listing. Energy Star qualification requires a white (-) front cap bevel finish and solite clear glass lens. Please note that the following options are not Energy Star qualified: 22KS, 27KH, and 30KH light engines, E1 LED, cross baffle and any non-solite clear lens options. NOTES Ambient temperatures at fixture location should not exceed 40 C during normal operation. For interior use only Consult factory for video capture applications with Dimming or. PHOTOMETRICS Consult factory or website for IES files. Tested in accordance with IEA LM79-2008. Page 6 Covered by US Patents: 8,581,520, 8,456,9 and 8,742,695. Patents pending. USAI,,, Color Harmony and