Humidification & Filtration

Active Humidification Gibeck Humid-Heat The idea is simple. To actively heat and humidify inspired breathing gases as close to the patient as possible, thereby eliminating the problems associated with condensation, including the handling of large volumes of water, heated wires, and water traps. Humid-Heat represents a fresh new approach to active humidification. First it retains the heat and moisture expired by the patient in a passive HME. It then adds just the amount of heat and humidity needed to bring the inspired breathing gases to alveolar conditions. Since external heat and humidity are added on the patient side of the HME, the ventilator circuits are always dry. Humid-Heat has preset values for temperature and humidity. The only parameter that needs to be set is the value of the minute volume of the ventilator. Still Humid-Heat ensures that the patients receive 100% relative humidity at 37 o C, i.e. 44 mg H 2 O/l breathing gas. With easier set-up. Less water, No water traps. No heated wires. Working range: Tidal volume: 250-1500 ml Minute volume: 3-30 L/min 1

Active Humidification Gibeck Humid-Heat Item Qty REF Humid-Heat, complete system,115v 1 kit 37101 Humid-Heat, complete system, 230V 1 kit 37102 Humid-Heat, complete system,100v 1 kit 37103 Each Humid-Heat complete system consists of: 1 supply unit, 1 angular clamp, 1 heater, 5 temperature probes, 10 water feed sets, 20 HMEs Supply unit 100V 1 37100 Supply unit 115V 1 37110 Supply unit 230V 1 37120 Heater 1 37160 Temperature probe 5 37170 Vented water feed set 10 37152 A-HME TM 20 37130 Clamp for rail 10 x 25 mm 1 37180 Clamp for rail 10 x 30 mm 1 37182 Angular clamp, one slot 1 37184 Humid-Heat Mounting Pole 1 37185 Humid-Heat bag holder 1 37186 Humid-Heat reservoir holder 1 37187 Humid-Heat reservoir, 440 ml sterile water 20 381-59 2

CONCHATHERM Humidification & Filtration Active Humidification The need for humidification is vital to a patient s well being. The CONCHATHERM humidifier heater provides heated molecular humidity for patients of all ages, from neonatal to adult. It is safe, effective, reliable and convenient to use, while delivering optimal humidity and temperature to the patient. The CONCHA system of heated humidification consists of the CONCHATHERM IV heated humidifier, the CONCHA-COLUMN humidifier cartridge, CONCHA sterile water reservoir and a circuit for delivery of heated and humidified respiratory gases to the patient. With the advanced micro-processor technology of the CONCHATHERM IV, Hudson RCI provides the most complete system available. The CONCHATHERM humidifier has multiple mounting capabilities and can be used with a variety of accessories. CONCHATHERM IV Humidifier Heater REF 400-10, 230V, 50 Hz European style power plug REF 400-11, same as REF 400-10 but United Kingdom style power plug - For use in adult or infant mode with a choice of conventional or heated-wire breathing circuits. - Advanced microprocessor technology for control of temperature and, when utilized, heated-wire function - Digital airway temperature display and column temperature display at the touch of button - 20-minute pause mode for use during delivery of nebulized medication therapy or circuit changes - Advanced audio and visual alarm package includes tracking alarms for high/low proximal airway temperature, thermistor probe alarms and heated-wire disconnect. 3

CONCHAPAK Self-contained water system for use with CONCHATERM heaters. Includes disposable standard or low-compliance column and 1650 ml sterile water reservoir. Safe, reliable gravityfeed system provides uninterrupted water flow. Easy reservoir and column replacement. Available with vertical or right-angle ports. Active Humidification Low-Compliance Columns REF 438220 Low-Compliance REF 438230 Low-Compliance with Vertical Ports - For use in most applications requiring more constant compressible volume and compliance or CPAP applications with continuous gas flow less than 50 LPM - Compressible volume: 248 ml ± 12 ml - Compliance: 0.25 ml cm H 2 O - Packaged 24 per case CONCHA Reservoir REF 438150 - CONCHA sterile water 1650 ml reservoir - Packaged 6 per case CONCHAPAK REF 438520 (right-angle port) - Low-compliance CONCHACOLUMN with CONCHA sterile water 1650 ml reservoir - Packaged 6 per case Standard Columns REF 438260 Concha Column REF 438270 with Vertical Ports - For use in most adult ventilatory applications - Compressible volume: 103 ml when reservoir is full; 268 ml when reservoir is at refill line - Packaged 24 per case CONCHA MINI Reservoir REF 438151 - CONCHA MINI sterile water 440 ml reservoir - Packaged 20 per case CONCHA MINI Reservoir REF 438152 - CONCHA MINI sterile water 760 ml reservoir - Packaged 10 per case CONCHAPAK REF 438560 (right-angle port) - Standard CONCHA-COLUMN with CONCHA sterile water 1650 ml - Packaged 6 per case 4

CONCHA System Accessories Humidification & Filtration A variety of temperature probes, adaptors and attachments designed specifically for CON- CHATHERM heated humidifiers enhance the CONCHA system s versatility and adaptability. Probes are sold individually. Adaptors are packaged in the case quantities indicated. Adult Probe Adaptor REF 380-74 - Packaged 24 per case CONCHA Nebulizer Adaptor REF 388-28 - Adjustable 28% to 90% - Packaged 30 per case Adult Dual-Thermistor Probe REF 380-89 210 cm REF 380-89L 245 cm - For use with CONCHA- THERM series - Right-angle proximal probe Pediatric Dual-Thermistor Probe REF 380-91 160 cm - for use with CONCHA- THERM series - Straight-tip proximal probe Active Humidification CONCHA Tubing Adaptor REF 384-00 - Packaged 30 per case CONCHA Hose Adaptor (5/16 in.) REF 384-10 - Packaged 30 per case CONCHA Oxygen Diluter REF 384-26 - Adjustable 26% - 90% - Packaged 30 per case Adult Thermistor Probe REF 380-92 - 84 inches - for use with CONCHA- THERM III and conventional ventilator circuit - Right-angle proximal probe Pediatric Thermistor Probe REF 380-93 - for use with CONCHA- THERM III and conventional pediatric ventilator circuit. - Straight-tip probe designed for smaller pediatric /neonatal wyes Heated Wire Adaptor REF 380-94 For F&P Heaters Ventilator Main Line Filter Kit REF 1606 - Includes REF 1605 main flow filter, tubing and adaptor - Packaged 30 to a case 5

CONCHA System Accessories Active Humidification A complete range of mounting brackets allows the CONCHATHERM heater to be mounted for easy use in many clinical applications. Sold individually. 386-72 386-81 Conchatherm III Series Mounting Brackets 386-10 Universal Pole Mount Bracket REF 386-10 Wall Bracket REF 386-40 386-76 386-40 Puritan-Bennett 7200 Ventilator Bracket REF 386-72 Siemens and ADVENT Ventilator Bracket REF 386-75 LP6, LP10, PLV-100, Puritan-Bennett COM- PANION 2801 Ventilator Bracket REF 386-76 Mini Reservoir Bracket for Mini Reservoir REF 386-79 Reservoir Bracket REF 386-81 6

CONCHA System Accessories A choice of bracket configurations for mounting the CONCHATHERM IV (400 series) directly to ventilators or other mounting hardware. These brackets are designed to optimize the gravity-feed feature of the CONCHA sterile water reservoir. Sold individually. 386-09 Active Humidification 386-74 386-53 CONCHATHERM IV Mounting Brackets Universal Clamp REF 386-09 Pole Mount, Short Support Arm REF 386-50 - Approximately 12 cm. Pole Mount, Extended Support Arm REF 386-52 - Approximately 18 cm. Wide Slide Mounting Bracket (fits CONCHA III base) REF 386-55 Siemens Cart Bracket REF 386-56 386-71 Mounting Bracket for the Siemens Servo Ventilator REF 386-74 Nellcor Puritan-Bennett 840 Bracket REF 386-82 Nellcor Puritan-Bennett 740 Bracket REF 386-84 386-51 Dräger Bracket REF 386-58 Mounting Bracket for the Puritan Bennet 7200 Ventilator REF 386-71 7

The Gibeck Humid-Vent Filters and Heat and Moisture Exchangers, offer a wide range of performance capabilities and configuration options to meet the unique needs of anesthesia, intensive care, emergency care and ENT. The Humid-Vent hygroscopic, bacteriostatic, microwell paper media provides optimal moisture output with low resistance to flow. Many configuration options allow the clinician to choose the product best suited to patient size, tidal volume and humidification needs. Filtered units provide bidirectional filtration efficiency up to 99.9999%, offering cross-contamination protection for patients, staff and equipment. Gibeck Humid-Vent Heat & Moisture Exchangers Humid-Vent 1 With over 25 years of proven clinical experience, the Humid-Vent 1 is the original, single-use, in-line HME. The angled version or Humidification Elbow eliminates the need for a gas sampling elbow. With three versions to choose from, straight, angled, and with CO 2 port, the practitioner has a choice to fit humidification needs and ETCO 2 connections. Humid-Vent 1 REF 11111 sterile, REF 11112 clean Individually packaged 50 to a box and 500 to a case Humid-Vent Micro+ Designed for neonatal care, the Humid-Vent Micro+ connects directly to a 3.0 mm or 3.5 mm endotracheal tube. By combining the HME and ET connector into one unit, dead space for this portion of the system is only 2.7 ml. In addition to gas sampling, the CO 2 port allows easy access for suctioning or instilling surfactants without removing the HME. The compact, lightweight Micro+ delivers 32 mg H 2 O/l @ VT 20 ml. Humid-Vent 1 Port REF 11132 clean Individually packaged 25 to a box and 250 to a case Humid-Vent 1 Port Elbow REF 11142 clean Individually packaged 25 to a box and 250 to a case Humid-Vent Micro+, 3.0 mm, Sterile REF 10121 sterile, REF 10122 clean Individually packaged 10 to a box and 200 to a case Humid-Vent Micro+, 3.5 mm, Sterile REF 10131 sterile, REF 10132, clean Individually packaged 10 to a box and 200 to a case Humid-Vent Mini REF 10011 sterile, REF 10012 clean Designed specifically for neonatal care, with standard 15 mm connector and tidal volume ranges of 15-50 ml. With a minimum dead space of 2.4 ml, Humid-Vent Mini provides over 30 mg H 2 O/L air @ VT 20 ml. Individually packaged 30 to a box and 600 to a case 8

Gibeck Humid-Vent Heat & Moisture Exchangers Humid-Vent 2 The Humid-Vent 2 is designed in both angled and straight (with or without flex tube) versions and is recommended for tidal volumes between 150 1500 ml. The transparent housing provides excellent visibility. The Humid-Vent 2 is designed for intensive care and anesthesia applications. Humid-Vent 2 Port REF 13311 sterile, REF 13312 clean Individually packaged 20 to a box and 200 to a case Humid-Vent 2S REF 14411 sterile, REF 14412 clean Individually packaged 20 to a box and 200 to a case Humid-Vent 2S Flex REF 17731 sterile, REF 17732 clean Individually packaged 20 to a box and 200 to a case 9

Trach-Vent The Trach-Vent and accessory products, the Trach-Vent Holder and Oxy-Vent, are designed specifically for tracheostomized or intubated, spontaneously breathing patients. The Trach-Vent weighs only 4 grams and has a dead space of just 10 ml. Recommended for tidal volumes of 50 ml and above, Trach-Vent can be used on both pediatric and adult patients. The Trach-Vent Holder conveniently attaches the Trach-Vent to the tracheostomy or endotracheal tube, so that the Trach-Vent can be easily removed and replaced during suctioning or change-out. Humidification & Filtration Gibeck Trach-Vent Heat & Moisture Exchangers Oxy-Vent allows for the delivery of humidified supplemental oxygen when using the Trach-Vent. The adaptor simply snaps over the Trach- Vent and the tubing attaches to the oxygen source. The Trach-Vent Starter Kit provides a comprehensive system for use in ICU, home care and long-term care applications. Each kit contains three Trach-Vents, one Trach-Vent Holder and one Oxy-Vent with tubing. Trach-Vent+ New version of Trach-Vent with two new features, suction port and built in chamber for oxygen support. - Self closing silicone suctioning port makes an easy access for suction of the patient airways - Built in chamber for humidified oxygen supply provides oxygen without drying out the airways. - Oxy-Tube oxygen tubing available separately or packed together with Trach-Vent+ Trach-Vent+ has all other features of Trach-Vent such as excellent humidity, low dead space and lightweight. It can be used on adults as well as children. Trach-Vent REF 41111 sterile, REF 41112 clean Individually packaged 50 to a box and 500 to a case Trach-Vent Starter Kit REF 41172 Each kit contains three Trach-Vents, one Trach-Vent Holder and one Oxy-Vent with tubing. Individually packaged 6 kits to a box and 60 to a case Trach-Vent+ REF 41311 sterile, REF 41312 clean Individually packaged 50 to a box and 500 to a case Oxy-Vent with/without Tubing REF 45512 (with tubing) Individually packaged 10 to a box and 100 in a case REF 49912 (without tubing) Individually packaged 20 to a box and 200 to a case Trach-Vent Holder REF 61112 Individually packaged 30 to a box and 600 to a case Oxy-Tube REF 45612 Oxygen tubing 210 cm w/one hose end. Trach-Vent+ and Oxy-Tube REF 41322 Trach-Vent+ and Oxy-Tube packed together (not mounted) 10

Humid-Vent Filter Light Humidification & Filtration Gibeck Humid-Vent combined HME & Filers Extremely lightweight at 30 grams, the Humid-Vent Filter Light incorporates a bacterial/viral filter with excellent filtration efficiencies as well as high moisture output. Designed for tidal volumes between 250 and 1500 ml, the Humid-Vent Filter Light is available in both straight and angled versions for greater application flexibility. Filtration efficiency up to 99.9999%. Humid-Vent Filter Light, Angled REF 18831 sterile, REF 18832 clean Individually packaged 20 to a box and 200 to a case Humid-Vent Filter Light, Straight REF 19931 sterile, REF 19932 clean Individually packaged 20 to a box and 200 to a case Humid-Vent Filter Compact A compact, lightweight, combined HME and bacterial/viral filter, the Humid-Vent Filter Compact offers solutions to the needs of both anesthesia and intensive care. Minimal dead space and recommended tidal volumes from 150 to 1000 ml. Designed in straight and angled versions, the Humid-Vent Filter Compact with gas sampling ports provides a filtration efficiency up to 99.9999%. Humid-Vent Filter Compact, Angled REF 18401 sterile, REF 18402 clean Individually packaged 25 to a box and 250 to a case Humid-Vent Filter Compact, Straight REF 19401 sterile, REF 19402 clean Individually packaged 25 to a box and 250 to a case Humid-Vent Filter Small A small, lightweight, combined HME and bacterial/viral filter, the Humid- Vent Filter Small offers solutions to the needs of both anesthesia and intensive care. With minimal dead space and recommended tidal volumes from 150 to 1000 ml, the Humid-Vent Filter Small can be used for both adult and pediatric applications. Designed in straight and angled versions, the Humid-Vent Filter Small with gas sampling ports provides a filtration efficiency up to 99.9999%. Humid-Vent Filter Small, Angled REF 18501 sterile, REF 18502 clean Individually packaged 20 to a box and 200 to a case Humid-Vent Filter Small, Straight REF 19501 sterile, REF 19502 clean Individually packaged 20 to a box and 200 to a case 11

Humid-Vent Filter Pedi Humid-Vent Filter Pedi has a tidal volume range of 50-250 ml and is designed for children. It will deliver 30 mg H 2 O/L air @ V T 100 ml. Built-in filter provides 99.9999% filtration efficiency and eliminates the need for additional filters in the circuit. Humidification & Filtration Gibeck Humid-Vent combined HME/Filters Humid-Vent Filter Pedi REF 11011 sterile, REF 11012 clean Individually packaged 20 to a box and 200 to a case 12

Gibeck Humid-Vent combined HME & Filters Moisture Dead Samp- Box/ REF Description TV Range Output Weight Resistance Space ling Filter Ste- Case (ml) (ml) (grams) (cm H 2 O) (ml) Port rile Qty. 10011 Humid-Vent Mini 15-50 30mg/Vt 20 4.5 0.6, 5 LPM 2.4 x 30/600 10012 Humid-Vent Mini 15-50 30mg/Vt 20 4.5 0.6, 5 LPM 2.4 30/600 10121 Humid-Vent Micro+ 3.0 10-50 32mg/Vt 20 4.3 1.8, 5 LPM 2.7 x x 10/200 10122 Humid-Vent Micro+ 3.0 10-50 32mg/Vt 20 4.3 1.8, 5 LPM 2.7 x 10/200 10131 Humid-Vent Micro+ 3.5 10-50 32mg/Vt 20 4.3 1.8, 5 LPM 2.7 x x 10/200 10132 Humid-Vent Micro+ 3.5 10-50 32mg/Vt 20 4.3 1.8, 5 LPM 2.7 x 10/200 11011 Humid-Vent Filter Pedi 50-250 30mg/Vt 100 14.5 1.4, 20 LPM 13 x x x 20/200 11012 Humid-Vent Filter Pedi 50-250 30mg/Vt 100 14.5 1.4, 20 LPM 13 x x 20/200 11111 Humid-Vent 1 50-600 29mg/Vt 300 9.4 0.3, 20 LPM 10 x 50/500 11112 Humid-Vent 1 50-600 29mg/Vt 300 9.4 0.3, 20 LPM 10 50/500 11132 Humid-Vent 1 Port 50-600 29mg/Vt 300 11.6 0.3, 20 LPM 14 x 25/250 11142 Humid-Vent 1 Port Elbow 50-600 29mg/Vt 300 11.8 0.3, 20 LPM 15 x 25/250 13311 Humid-Vent 2 Port 150-1500 28mg/Vt 600 20.9 0.8, 60 LPM 29 x x 20/200 13312 Humid-Vent 2 Port 150-1500 28mg/Vt 600 20.9 0.8, 60 LPM 29 x 20/200 14411 Humid-Vent 2S 150-1500 28mg/Vt 600 19.8 0.7, 60 LPM 29 x 20/200 14412 Humid-Vent 2S 150-1500 28mg/Vt 600 19.8 0.7, 60 LPM 29 20/200 17731 Humid-Vent 2S Flex 250-1500 29mg/Vt 600 33.4 0.9, 60 LPM 57 x 20/200 17732 Humid-Vent 2S Flex 250-1500 29mg/Vt 600 33.4 0.9, 60 LPM 57 20/200 18401 Humid-Vent Filter Compact Angled 150-1000 30mg/Vt 1000 32.3 1.8, 60 LPM 38 x x x 25/250 18402 Humid-Vent filter Compact Angled 150-1000 30mg/Vt 1000 32.3 1.8, 60 LPM 38 x x 25/250 18501 Humid-Vent Filter Small Angled 150-1000 30mg/Vt 500 22.0 2.1, 30 LPM 27 x x x 20/200 18502 Humid-Vent Filter Small Angled 150-1000 30mg/Vt 500 22.0 2.1, 30 LPM 27 x x 20/200 18831 Humid-Vent Filter Light Angled 250-150 0 30mg/Vt 1200 30.0 1.4, 60 LPM 60 x x x 20/200 18832 Humid-Vent Filter Light Angled 250-150 0 30mg/Vt 1200 30.0 1.4, 60 LPM 60 x x 20/200 19401 Humid-Vent Filter Compact Straight 150-1000 30mg/Vt 1000 31.0 1.8, 60 LPM 35 x x x 25/250 19402 Humid-Vent Filter Compact Straight 150-1000 30mg/Vt 1000 31.0 1.8, 60 LPM 35 x x 25/250 19501 Humid-Vent Filter Small Straight 150-1000 30mg/Vt 500 21.0 2.1, 30 LPM 26 x x x 20/200 19502 Humid-Vent Filter Small Straight 150-1000 30mg/Vt 500 21.0 2.1, 30 LPM 26 x x 20/200 19931 Humid-Vent Filter Light Straight 250-150 0 30mg/Vt 1200 30.0 1.4, 60 LPM 60 x x x 20/200 19932 Humid-Vent Filter Light Straight 250-150 0 30mg/Vt 1200 30.0 1.4, 60 LPM 60 x x 20/200 41111 Trach-Vent >50 27mg/Vt 500 4.0 0.35, 60 LPM 10 x 50/500 41112 Trach-Vent >50 27mg/Vt 500 4.0 0.35, 60 LPM 10 50/500 41172 Trach-Vent Starter Kit >50 27mg/Vt 500 4.0 0.35, 60 LPM 10 6/60 kit 41311 Trach-Vent+ >50 27mg/Vt 500 6.3 0.25, 60 LPM 10 x 50/500 41312 Trach-Vent+ >50 27mg/Vt 500 6.3 0.25, 60 LPM 10 50/500 41322 Trach-Vent+ with Oxy-Tube >50 27mg/Vt 500 6.3 0.25, 60 LPM 10 10/100 13

Iso-Gard HEPA Light A hydrophobic bacterial/viral filter with HME properties, the Gibeck Iso-Gard HEPA Light offers the highest performance specifications available for the protection of patients from contamination in breathing circuits, anesthesia machines and ventilators. Humidification & Filtration Gibeck Iso-Gard Bacterial/Viral Filters Compact, lightweight design. The Iso-Gard HEPA Light includes a bacterial/viral filter with HEPA performance (HEPA Class 13). Filtration efficiency 99.9999+% for maximum protection from contamination to patient and equipment. Available in standard and gas sampling port versions with two ISO standard connector options. Machine or patient connection. HME properties: 26 mg H 2 O/L air at V T 500. 28011 / 28012 Iso-Gard HEPA Light with Port REF 28001 sterile, REF 28002 clean - Individually packaged 20 to a box and 200 to a case Iso-Gard HEPA Light 28001 / 28002 Iso-Gard HEPA Light 28022 REF 28022 - Individually packaged 20 to a box and 200 to a case REF 28011 sterile, REF 28012 clean - Individually packaged 20 to a box and 200 to a case Iso-Gard HEPA Small Small version of HEPA Filter. Same filtration features & benefits as above. Available in both straight and angled version. Single connectors ISO standard 15/22-15 mm. Iso-Gard HEPA Small, Angled REF 28051 sterile, REF 28052 clean - Individually packaged 250 to a box Iso-Gard HEPA Small, Straight REF 28061sterile, REF 28062 clean - Individually packaged 250 to a box 14

Gibeck Iso-Gard Bacterial/Viral Filters Iso-Gard Filter An advanced bacterial/viral filter, the Gibeck Iso-Gard depth filters offer excellent performance specifications for protection on the patient end of the circuit. 19212 Designed in configurations with straight and angled connectors and gas sampling ports, Iso- Gard depth filter incorporate filtration efficiency of 99.9999% for maximum protection from contamination to patient and equipment. Double connectors for both patient and circuit sides are ISO standard 22 mm I.D./15 mm O.D. x 22 mm O.D./15 mm I.D. 18212 Iso-Gard Filter, Angled REF 18211 sterile REF 18212 clean Individually packaged 25 to a box and 250 to a case Iso-Gard Filter, Straight REF 19211 sterile REF 19212 clean Individually packaged 25 to a box and 250 to a case Iso-Gard Filter Small A small, lightweight bacterial/viral filter designed for adults and children. It is available in straight and angled versions with minimal deadspace (23.6 ml). Incorporated CO 2 port for gas sampling eliminates the need for an angled connector. Filtration efficiency up to 99.9999% for maximum protection from contamination to patient, equipment and staff. The light weight makes it ideal for patient close fitting for both children and adults. Single connectors ISO standard 15/22-15 mm. Iso-Gard Filter Small, Angled REF 18511 sterile REF 18512 clean Individually packaged 20 to a box and 200 to a case Iso-Gard Filter Small, Straight REF 19511 sterile REF 19512 clean Individually packaged 20 to a box and 200 to a case 15

Anest-Guard Filter Humidification & Filtration A bacterial/viral filter to protect the anaesthesia machine or ventilator from contamination. Every filter is tested after assembly for leaks or occlusions. Square housing for positive grasp with gloves or wet hands. Bacterial and viral efficiency >99.99%. Gibeck Anest-Guard Bacterial/Viral Filters Anest-Guard REF 28812 clean - Individually packaged 20 to a box and 200 to a case 16

Gibeck Bacterial/Viral Filters Dead Samp- Micro- Box/ REF Description Weight Resistance Space ling Electro- glass Sterile Case (grams) (cm H 2 O) (ml) Port statical fiber Qty. 18211 Iso-Gard Filter Angled 23 1.6, 60 LPM 30 x x x 25/250 18212 Iso-Gard Filter Angled 23 1.6, 60 LPM 30 x x 25/250 18511 Iso-Gard Filter Small Angled 16 1.9, 30 LPM 21 x x x 20/200 18512 Iso-Gard Filter Small Angled 16 1.9, 30 LPM 21 x x 20/200 19211 Iso-Gard Filter Straight 21.7 1.6, 60 LPM 26 x x x 25/250 19212 Iso-Gard Filter Straight 21.7 1.6, 60 LPM 26 x x 25/250 19511 Iso-Gard Filter Small Straight 16 1.9, 30 LPM 20 x x x 20/200 19512 Iso-Gard Filter Small Straight 16 1.9, 30 LPM 20 x x 20/200 28001 Iso-Gard HEPA Light Port 38 2.0, 60 LPM 80 x x x 20/200 28002 Iso-Gard HEPA Light Port 38 2.0, 60 LPM 80 x x 20/200 28011 Iso-Gard HEPA Light 37 2.0, 60 LPM 80 x x 20/200 28012 Iso-Gard HEPA Light 37 2.0, 60 LPM 80 x 20/200 28022 Iso-Gard HEPA Light 34 1.6, 60 LPM 80 x 20/200 28051 Iso-Gard HEPA Small, Angled 23 2.3, 30 LPM 34 x x x 25/250 28052 Iso-Gard HEPA Small, Angled 23 2.3, 30 LPM 34 x x 25/250 28061 Iso-Gard HEPA Small, Straight 23 2.3, 30 LPM 36 x x x 25/250 28062 Iso-Gard HEPA Small, Straight 23 2.3, 30 LPM 36 x x 25/250 28812 Anest-Guard 38.2 1.1, 60 LPM 50 x 20/200 17

Gibeck Catheter Mounts Hudson RCI offers a variety of different catheter mounts for connection of the breathing system or HME/Filter to the patient. The range consists of three high quality flextubes, connected to different adaptors and a double swivel. High quality see through material. 22 Female connector machine side - fits over 22 mm Male Y-piece. Environmental friendly after incineration. Latex free Can be combined with Gibeck HMEs & Bacterial/viral filters. Soft-Flex REF 22582 clean - Soft flexible tubing allows the product to be positioned without kinking. - Patient side: 15 Female connector - Machine side: 22 Female connector - Packed with red dust cap for protection. Smooth-Flo Flex REF 22552 clean - Smoothbore type flextube provides minimal water collection and improved drainage. - Patient side: 15 Female connector - Machine side: 22 Female connector - Packed with red dust cap for protection. Expandi-Flex REF 22562 clean - Expandable flextube that offers a variety of lengths and can be fixed in different positions. - Patient side: 15 Female connector - Machine side: 22 Female connector - Packed with red dust cap for protection. 18

Gibeck Catheter Mounts Soft-Flex with Elbow REF 22572 clean - Soft flexible tubing allows the product to be positioned without kinking. - Patient side: 22 Male /15 Female connector - Machine side: 22 Female connector Expandi-Flex with Elbow REF 22542 clean - Expandable flextube that offers a variety of lengths and can be fixed in different positions. - Patient side: 22 Male /15 Female connector - Machine side: 22 Female connector Double Swivel Connector REF 23411 sterile REF 23412 clean - Seal around 9 mm cap for fiber optic bronchoscopy and 3.5 mm port for suctioning. - Patient side: 22 Male /15 Female connector - Machine side: 15 Male connector 19

Gibeck Catheter Mounts Soft-Flex with Double Swivel REF 22521 sterile REF 22522 clean - Soft flexible tubing allows the product to be positioned without kinking. - Swivel with seal around 9 mm cap for fiber optic bronchoscopy and 3.5 mm port for suctioning. - Patient side: 22 Male /15 Female connector - Machine side: 22 Female connector Expandi-Flex with Double Swivel REF 22531 sterile REF 22532 clean - Expandable flextube that offers a variety of lengths and can be fixed in different positions. - Swivel with seal around 9 mm cap for fiber optic bronchoscopy and 3.5 mm port for suctioning. - Patient side: 22 Male /15 Female connector - Machine side: 22 Female connector Smooth-Flo with Double Swivel REF 22511 sterile REF 22512 clean - Smoothbore type flextube provides minimal water collection and improved drainage. - Swivel with seal around 9 mm cap for fiber optic bronchoscopy and 3.5 mm port for suctioning. - Patient side: 22 Male /15 Female connector - Machine side: 22 Female connector Catheter Mounts Ordering Information Qty in REF Item Weight Length Dead space box/case 22511 sterile Smooth-Flo with Double Swivel 26.1 g 205 mm 34 ml 25/250 22512 clean Smooth-Flo with Double Swivel 26.1 g 205 mm 34 ml 35/350 22521 sterile Soft-Flex with Double Swivel 20.5 g 210 mm 40 ml 25/250 22522 clean Soft-Flex with Double Swivel 20.5 g 210 mm 40 ml 35/350 22531 sterile Expandi-Flex with Double Swivel 20.1 g 140/200 mm 23/39 ml 30/300 22532 clean Expandi-Flex with Double Swivel 20.1 g 140/200 mm 23/39 ml 40/400 22542 clean Expandi-Flex with Elbow 16.8 g 125/180 mm 27/43 ml 40/400 22552 clean Smooth-Flo Flex 16.4 g 187 mm 38.5 ml 35/350 22562 clean Expandi-Flex 14.3 g 122/179 mm 22/38 ml 25/250 22572 clean Soft-Flex with Elbow 17.3 g 195 mm 42.5 ml 35/350 22582 clean Soft-Flex 14.7 g 195 mm 36 ml 35/350 23411 sterile Double Swivel Connector 9.7 g 45 mm 6.5 ml 20/200 23412 clean Double Swivel Connector 9.7 g 45 mm 6.5 ml 20/200 20

Combined Filter/HMEs and Flextubes Red REF Description protec- Sterile Clean Box/Case Qty. tion cap 18331 Humid-Vent Filter Compact Angled and Expandi-Flex x x 20/80 18532 Humid-Vent Filter Small Angled and Expandi-Flex x x 20/80 19012 Iso-Gard Filter Straight and Expandi-Flex with Elbow x 25/250 19022 Iso-Gard Filter Small Straight and Expandi-Flex with Elbow x 25/250 19031 Humid-Vent Filter Small Straight and Soft-Flex with Elbow x 15/150 19032 Humid-Vent Filter Small Straight and Soft-Flex with Elbow x 25/250 19042 Humid-Vent Filter Compact Straight and Expandi-Flex with Double Swivel x 20/80 19052 Humid-Vent Filter Small Straight and Expandi-Flex with Double Swivel x 25/250 19061 Humid-Vent Filter Compact Straight and Smooth-Flo Flex with Double Swivel x 15/150 19062 Humid-Vent Filter Compact Straight and Smooth-Flo Flex with Double Swivel x 20/200 19072 Humid-Vent Filter Small Straight and Smooth-Flo Flex with Double Swivel x 20/200 19092 Humid-Vent Filter Compact Straight and Expandi-Flex with Elbow, Mounted x 20/80 19112 Humid-Vent Filter Light Straight and Soft-Flex with Double Swivel, Mounted x x 20/80 19132 Humid-Vent Filter Compact Angled and Expandi-Flex mounted on dry side x x 30/120 19261 Iso-Gard Filter Straight and Expandi-Flex, Mounted x x 20/80 19262 Iso-Gard Filter Straight and Expandi-Flex, Mounted x x 25/100 19272 Iso-Gard Filter Straight and Expandi-Flex x x 30/120 19412 Humid-Vent Filter Compact Straight and Soft-Flex with Double Swivel, Mounted x x 20/80 19422 Humid-Vent Filter Compact Straight and Soft-Flex with Double Swivel x x 20/80 19522 Humid-Vent Filter Small Straight and Expandi-Flex x x 20/80 19561 Iso-Gard Filter Small Straight and Expandi-Flex x x 20/80 19562 Iso-Gard Filter Small Straight and Expandi-Flex x x 20/80 19611 Humid-Vent Filter Compact Straight and Expandi-Flex, Mounted x x 20/80 19612 Humid-Vent Filter Compact Straight and Expandi-Flex, Mounted x x 25/100 19621 Humid-Vent Filter Compact Straight and Expandi-Flex x x 20/80 19622 Humid-Vent Filter Compact Straight and Expandi-Flex x x 30/120 19662 Humid-Vent Filter Small Straight and Expandi-Flex with Elbow x 20/80 19722 Humid-Vent Filter Light Straight and Expandi-Flex x x 25/100 19812 Humid-Vent Filter Compact Straight and Smooth-Flo Flex, Mounted x x 20/80 28031 Iso-Gard HEPA Light Port and Expandi-Flex, Mounted x x 15/60 28032 Iso-Gard HEPA Light Port and Expandi-Flex, Mounted x x 20/80 28041 Iso-Gard HEPA Light Port and Expandi-Flex x x 15/60 28042 Iso-Gard HEPA Light Port and Expandi-Flex x x 20/80 28081 Iso-Gard HEPA Small Straight and Expandi-Flex x x 20/80 28082 Iso-Gard HEPA Small Straight and Expandi-Flex x x 20/80 28202 Iso-Gard HEPA Small Straight and Expandi-Flex with Elbow x 25/250 28212 Iso-Gard HEPA Small Straight and Expandi-Flex with Double Swivel x 25/250 28222 Iso-Gard HEPA Light Port and Expandi-Flex with Elbow x 20/200 21

AQUA+ TS Humidification & Filtration AQUA+ Heat & Moisture Exchanger REF 41574 AQUA+ TS (Suction) - For use with tracheostomy tubes with 15 mm O.D. connector - Port for supplemental oxygen - Port for suctioning (REF 41574) - Tidal volume range: 75-1000 ml - Moisture output: 24 mg H 2 O/L at TV=0.5 L (40% RH, 22 o C) - Resistance: 0.2 cm H 2 O at 60 LPM - Dead space: 15 ml - Packaged 30 per case AQUA+ FH AQUA+ swivel HME and combined HME & Filter REF 41575 - Tidal volume range: 350-1500 ml - Moisture output: 31 mg H 2 O at TV=0.5 L - Resistance: 1.6 cm H 2 O at 60 LPM - Dead space: 82 ml - Filtration properties: 99.9+% - Packaged 20 per case Main Flow Bacterial/Viral Filter AQUA+ Bacterial/Viral Filter REF 41605-22 mm I.D. x 15 mm I.D./22 mm O.D. - Bacterial filtration efficiency: 99.999+% - Viral filtration efficiency: 99.99+% - Dead space: 42 ml - Flow resistance: approximately 1.5 cm H 2 O at 60 LPM - Individually packaged 50 per case 22