PRODUCT CATALOG FOR ALL INFORMATOIN AND REQUIREMENTS. WEB:

PRODUCT CATALOG 2012-2013 FOR ALL INFORMATOIN AND REQUIREMENTS WEB: www.mefasco.com EMAIL: info@mefasco.com

WHERE TO USE Amerex manufactures an extensive variety of hand portable and wheeled fire extinguishers, both compliance (code required) and specialty types. Specialty type extinguishers are intended for use on particular types of hazards, so careful attention should be made to locating them in close proximity to the specific hazard they are meant to protect. It is natural for a person to use the extinguisher located nearest to a fire. The most current issue of NFPA-10 should be consulted for minimum recommended fire extinguisher types, placement and travel distances. Your local Amerex Fire Equipment Distributor is professionally equipped to help you evaluate and implement these recommendations. All Picture Symbols are detailed below and should be reviewed with all who might be expected to use a fire extinguisher. Everyone should be familiar with these picture symbols which identify the types of fires on which they may be used. The International sign system diagonal red slash indicates a potential danger if the extinguisher is used on that particular type of fire. TYPES OF FIRES TYPES OF EXTINGUISHERS CLASS A ORDINARY COMBUSTIBLES: wood, paper, rubber, fabrics and many plastics CLASS A CLASS B FLAMMABLE LIQUIDS & GASES: gasoline, oils, paint, lacquer and tar CLASS C CLASS D FIRES INVOLVING LIVE ELECTRICAL EQUIPMENT COMBUSTIBLE METALS OR COMBUSTIBLE METAL ALLOYS (NO picture symbol) CLASS K FIRES IN COOKING APPLIANCES THAT INVOLVE COMBUSTIBLE COOKING MEDIA vegetable or animal oils and fats CLASS A:B CLASS A:B:C CLASS A:C CLASS B:C CLASS D CLASS A:K HOW TO USE All Amerex extinguishers are furnished with a detailed Owners Manual containing valuable information. The manual contains information on the installation, use and maintenance of the extinguisher. The extinguisher nameplate (label) contains specific information on HOW TO USE the particular extinguisher. The label instructions vary slightly according to type and size. All potential operators should be totally familiar with the instructions on any extinguisher they might be required to use. 2 ALL AMEREX FIRE EXTINGUISHERS COMPLY WITH THE RECOMMENDATIONS OF THE NATIONAL FIRE PROTECTION ASSOCIATION AND ARE TESTED AND RATED BY UNDERWRITERS LABORATORIES OR FM GLOBAL TO ANSI / UL STANDARDS. ALL EXTINGUISHER NAMEPLATES CONTAIN THE NECESSARY HMIS INFORMATION TO COMPLY WITH NATIONAL AND LOCAL OSHA REQUIREMENTS.

Amerex Corporation RUGGED 5 Year Manufacturer s Warranty Stored Pressure Design Polished Stainless Steel Cylinders All Metal Valve Construction Exclusive crevice free, butt welded cylinders Temperature Range +40 F to 120 F CLEAN Leaves no powder residue USER FRIENDLY Maximum visibility during discharge Large Loop Stainless Steel Pull Pin Bar Coded and Bi-lingual Labels Model 240 Model 254 Model 252 250 AVAILABLE IN A 33 GAL. FFFP WHEELED EXTINGUISHER OR STATIONARY UNIT WATER & FOAM Model 240 utilizes the cooling, soaking and penetrating effect of a 45-55 ft. stream of WATER. The 55 sec. discharge time makes it very effective for inexperienced operators for use on Class A fires. Model 254 AFFF FOAM unique 6 liter size fills many requirements for a lighter, more compact Class A:B extinguisher. Easy and effective application with the spray nozzle. Apply to Class B liquid spills to prevent ignition. Ideal for emergency first response vehicles. Model 252 FFFP FOAM adds Class B fire fighting capability to the Class A effectiveness of this extinguisher. The Alcohol Resistant fire fighting agent is effective on fires in a wide variety of Class B materials such as alcohols, polar solvents, hydrocarbons and combinations such as gasohol. Apply to a non-ignited Class B liquid spill and it will seal the surface minimizing the chance of serious fire. Model 250 AFFF FOAM Class A:B extinguisher. Easy and effective application with air aspirated nozzle. Apply to Class B liquid spills to prevent ignition. Ideal for emergency first response vehicles. The model 240 may be freeze protected to -40ºF by adding a Model 506 Anti-Freeze charge AGENT TYPE WATER AFFF FOAM FFFP FOAM DESIGN HOSE & NOZZLE HOSE & SPRAY NOZZLE HOSE & AIR ASPIRATED NOZZLE MODEL NUMBER 240 254 250 / 250CG 252 UL RATING 2A 2A:10B 3A:20B 3A:20B CAPACITY 2.5 GAL 6 LITER 2.5 GAL 2.5 GAL SHIPPING WT. (LBS. EMPTY) 7.5 7.5 11 11 HEIGHT (IN.) 24.5 19 24.5 24.5 WIDTH (IN.) 9 8 9 9 DEPTH (IN.) 7 7 7 7 RANGE (INITIAL- FT) 45-55 10-12 10-12 10-15 FM APPROVED YES YES DISCHARGE TIME (SEC.) 55 30 55 55 INCLUDED BRACKET WALL WALL WALL WALL Manufactured and Tested to ANSI/UL Standards Complies with NFPA 10 Standard ISO-9001 / ISO-14001 Certified UL LISTED CONFORMS TO TEST STANDARDS: WATER: CAN/ULC-S507 - ANSI/UL626 & CAN/ULC-S508 - ANSI/UL711 FOAM: MADE IN U.S.A. CAN/ULC-S554 - ANSI/UL8 & CAN/ULC-S508 - ANSI/UL711 3

WET CHEMICAL Amerex Corporation RUGGED 5 Year Manufacturer s Warranty Stored Pressure Design Polished Stainless Steel Cylinders All Stainless Steel Valve Construction Exclusive Crevice Free, Butt Welded Cylinder Tested on Commercial Deep Fat Fryers to ANSI / UL 711Test Protocol and Safe to Use on Class C Fires Class 2A Rated to Meet Fire Code Occupancy Hazard Requirements Temperature Range +40 F to 120 F B260 B262 USER FRIENDLY Factory Charged Large Loop Stainless Steel Pull Pin Swivel Connection on Hose Allows Nozzle to be Oriented for Proper Use Nozzle Grip Design with 45 Angle for Easy Overhead Application Agent Discharged as a Fine Mist Helps Prevent Grease Splash and Re-flash While Cooling the Appliance Precise Extinguishing Agent Application Bar Coded and Bi-lingual Labels OPTION USCG Approved with Bracket Listed on UL Label Coast Guard Approved B260CG B262CG MUST USE 810CG BRACKET *(Sold Separately) WET CHEMICAL extinguishers are the best restaurant kitchen appliance hand portable fire extinguishers you can purchase. Each model has been tested and approved for the Class K listing by UL specifically for restaurant kitchen hazards. They contain a special potassium acetate based agent. The recent trend to more efficient cooking appliances and use of vegetable based cooking oils dictates the use of a hand portable fire extinguisher with greater fire fighting capacity and cooling effect to combat these very hot and difficult fires. Available in two sizes - 6 liter or 2½ gal. - with attractive stainless steel cylinders and easy to use hose and spray application nozzle. The superior fire fighting capability of the Wet Chemical agent is placed exactly where you aim it with no chemical residue to clean up. The Models B260 and B262 are the ideal KITCHEN USE fire extinguishers. They supplement existing cooking equipment automatic system protection for an extra margin of safety. Excellent for use on all cooking appliances including solid fuel charbroilers 4 AGENT TYPE WET CHEMICAL DESIGN HOSE & SPRAY NOZZLE MODEL NUMBER B260 B262 B260CG B262CG UL RATING 2A:K 2A:K CAPACITY 6 LITER 2.5 GAL 6 LITER 2.5 GAL SHIPPING WT. (LBS.) 22.5 33.5 22.5 33.5 HEIGHT (IN.) 19 24.5 19 24.5 WIDTH (IN.) 9 9 9 9 DEPTH (IN.) 7 7 7 7 RANGE (INITIAL- FT) 10-12 10-12 10-12 10-12 FM APPROVED YES YES DISCHARGE TIME (SEC.) 53 107 53 107 INCLUDED BRACKET WALL WALL WALL WALL Complies with NFPA 10 Standard ISO-9001 and ISO-14001 Certified UL LISTED CONFORMS TO TEST STANDARDS: CAN/ULC-S554 - ANSI/UL8 & CAN/ULC-S508 - ANSI/UL711 MADE IN U.S.A.

Amerex Corporation RUGGED 5 Year Manufacturer s Warranty Stored Pressure Design Stainless Steel Cylinders Durable High Gloss Polyester Powder Paint All Metal Valve Construction Exclusive Crevice Free, Butt Welded Cylinder Temperature Range +40 F to 120 F MRI SAFE Nonmagnetic Construction Tested by an Independent Agency for use in MRI Facilities to 7 Tesla (including wall hanger bracket) CLEAN Non-toxic - Causes no Respiratory Problems De-ionized Water Extinguishing Agent (sold separately) Sanitary White Paint Finish (easy to clean) No Powder Residue USER FRIENDLY Wand Provides Greatest Operator Safety Large Loop Stainless Steel Pull Pin Maximum Visibility During Discharge No Electrical Conductivity Back to the Operator No Thermal or Static Shock Minimal Training - Simplest to use Most Economical Agent Available Bar Coded and Bi-lingual Labels OPTION USCG Approved with Bracket Listed on UL Label Available with Polished Stainless Steel Cylinders B270NM Tested to ANSI/UL 711 for Class C Listing B272NM NONMAGNETIC WATER MIST WATER MIST is the ultimate extinguisher for Class A fires and where a potential Class C (electrical) hazard exists. The fine spray from the unique misting nozzle provides safety from electrical shock, greatly enhances the cooling and soaking characteristics of the agent and reduces scattering of burning materials. The Amerex Water Mist extinguishers contain de-ionized water (sold separately) making them the best extinguishers for protection of hospital environments, valuable books and documents, telecommunication facilities and clean room manufacturing facilities. The Amerex Water Mist extinguishers are easy to use, maintain, and service. Safe to use in MRI facilities and on energized equipment AGENT TYPE DE-IONIZED WATER DESIGN HOSE & WAND MODEL NUMBER B270NM B272NM UL RATING 2A:C 2A:C CAPACITY 1.75 GAL 2.5 GAL SHIPPING WT. (LBS. EMPTY) 7 8 HEIGHT (IN.) 19 24.5 HEIGHT WITH HOSE AND WAND INSTALLED (IN.) 24.5 27.5 WIDTH (IN.) 11 11 DEPTH (IN.) 7 7 RANGE (INITIAL- FT) 10-12 10-12 DISCHARGE TIME (SEC.) 72 80 INCLUDED BRACKET NM WALL NM WALL MADE IN U.S.A. Manufactured and Tested to ANSI/UL Standards Complies with NFPA 10 Standard ISO-9001 / ISO-14001 Certified UL LISTED CONFORMS TO TEST STANDARDS: CAN/ULC-S554 - ANSI/UL8 & CAN/ULC-S508 - ANSI/UL711 5

HALOTRON I 6 Amerex Corporation RUGGED 5 Year Manufacturer s Warranty Stored Pressure Design Dependable Drawn Steel Cylinders Durable High Gloss Polyester Powder Paint All Metal Valve Construction Temperature Range -40 F to 120 F ENVIRONMENTALLY ACCEPTABLE EPA approved Clean Agent for Class A, B and C hazards Low GWP (Global Warming Potential) Low ODP (Ozone Depletion Potential) Short Atmospheric Lifetime CLEAN Leaves No Residue USER FRIENDLY Maximum Visibility During Discharge Large Loop Pull Pin No Electrical Conductivity Back to the Operator No Thermal or Static Shock Bar Coded and Bi-lingual Labels OPTION 5 lb., 11 lb. and 15 ½ lb. Extinguishers are USCG Approved with Bracket Listed on UL Label Aluminum Valve A384T B385TS B386T B394TS Halotron I clean fire extinguishing agent discharges as a rapidly evaporating liquid, which is non-conductive, non-corrosive, and leaves behind no residue. Halotron I is the clean agent market leader with a history of successful real-world protection of valuable assets. From model scale aircraft to wide body commercial aircraft, from data centers to pharmaceutical and other industrial plants, the Halotron I agent has been used to extinguish the fire, limit damage and help reduce downtime that can be caused by other agents. The Halotron I clean agent has been determined to be the most environmentally beneficial halocarbon agent on the market today that meets wide performance standards. The primary raw material in the agent is HCFC-123, which has an outstanding profile of near-zero ozone depleting potential (0.0098, CFC-11=1.0) and a low global warming potential (77, 100 yr. CO2 time horizon). State of the art atmospheric modeling completed in 2009 describes the smaller environmental footprint than HFC-based agents available for portable extinguishers.ideal applications for these extinguishers include: data centers, laboratories, manufacturing plants, general office areas, computer rooms, telecommunication facilities, clean rooms, control rooms, warehouses, military electronics, vehicles including classic autos, boats, engine compartments, aircraft ramps, onboard aircraft and in facilities that service aircraft and any facility where dry chemical extinguishers could cause unacceptable damage or contamination. FAA Approved Models Available (See Chart Below) AGENT TYPE HALOTRON I VALVE TYPE ANODIZED ALUMINUM CHROMED BRASS DESIGN NOZZLE HOSE & NOZZLE MODEL NUMBER A384T B385TS B386T B394TS 397 398 UL & ULC RATING 1B:C 2B:C 5B:C 5B:C 1A:10B:C 2A:10B:C CAPACITY (LBS.) 1.4 2.5 5 5.5 11 15.5 SHIPPING WT. (LBS.) 3.25 5.25 9.5 10 22.5 27.5 HEIGHT (IN.) 10 15.5 15.25 15 21.88 21.88 WIDTH (IN.) 3.5 6.38 5.75 5.13 9.25 9.25 DEPTH (IN.) 2.63 3 4.25 4.25 6 6 RANGE (INITIAL- FT) 6-8 6-10 9-15 9-15 9-15 12-18 DISCHARGE TIME (SEC.) 9 9 9 9 9 14 FM APPROVED YES YES YES OPTIONAL CHROME CYLINDER YES YES YES MINIMUM CONFINED SPACE REQUIREMENTS (CU. FT.) 196 350 700 770 1540 2170 FAA APPROVED MODEL YES YES YES INCLUDED BRACKET VEHICLE VEHICLE VEHICLE AIRCRAFT WALL WALL AVAILABLE IN WHEELED EXTINGUISHERS Manufactured and Tested to ANSI/UL Standards Complies with NFPA 10 Standard ISO-9001/ ISO-14001 Certified UL LISTED CONFORMS TO TEST STANDARDS: CAN/ULC-S556 - ANSI/UL2129 & CAN/ULC-S508 - ANSI/UL711 MADE IN U.S.A. Brass Valve 397 398

Amerex Corporation RUGGED 1 Year Manufacturer s Warranty Stored Pressure Design Dependable Drawn Steel Cylinders Durable High Gloss Polyester Powder Paint All Metal Valve Construction Temperature Range -40 F to 120 F CLEAN Leaves no residue Reclaimed Halon 1211 is Restored to Original Military Specification Uses All Recycled Gas in Accordance With The Montreal Protocol USER FRIENDLY Maximum Visibility During Discharge Large Loop Pull Pin No Electrical Conductivity Back to the Operator No Thermal or Static Shock Bar Coded and Bi-lingual Labels OPTION USCG Approved with Bracket Listed on UL Label (except model A344T) Aluminum Valve A344T C352TS B355T C354TS Brass Valve B369 B371 361 HALON 1211 HALON 1211 is a liquified gas, pressurized with nitrogen, which discharges as a vapor causing no cold or static shock and no impairment of the operator s vision. This CLEAN agent quickly penetrates difficult to see and hard to reach areas and leaves no residue. It is recommended for protection of delicate, sensitive and expensive computers, electrical equipment, tapes and film, automotive and aircraft engines, laboratory chemicals and equipment. Quality industrial grade hardware, CLEAN agent, light weight, good discharge range and excellent fire extinguishing ability. Recycled gaseous agent certified to meet military specifications AGENT TYPE HALON 1211 VALVE TYPE ANODIZED ALUMINUM CHROME PLATED BRASS DESIGN NOZZLE HOSE NOZZLE HOSE MODEL NUMBER A344T * C352TS * C354TS B355T B369 B371 361 UL & ULC RATING 2B:C 5B:C 5B:C 10B:C 1A:10B:C 2A:40B:C 4A:80B:C CAPACITY (LBS.) 1.25 2.5 3 5 9 13 17 SHIPPING WT. (LBS.) 2.75 5.5 6 9.75 16.75 22 36.25 HEIGHT (IN.) 10 14.38 14.38 15.25 16.25 20.25 24 WIDTH (IN.) 3.63 4.5 6 5.75 8.5 8.5 9.75 DEPTH (IN.) 2.63 3 3 4.25 5 5 7 RANGE (INITIAL- FT) 9-12 9-15 9-15 9-15 12-18 12-18 12-18 DISCHARGE TIME (SEC.) 10 10 12 10 9 14 22 OPTIONAL CHROME CYLINDER YES YES YES YES YES YES MINIMUM SPACE REQUIREMENTS (CU. FT.) 156 312 375 624 1123 1622 2120 INCLUDED BRACKET VEHICLE AIRCRAFT AIRCRAFT VEHICLE WALL WALL WALL * SPECIAL VALVE DESIGN FOR AIRCRAFT INSTALLATIONS MADE IN U.S.A. Manufactured and Tested to ANSI/UL Standards Complies with NFPA 10 Standard ISO-9001/ ISO-14001 Certified UL LISTED CONFORMS TO TEST STANDARDS: UL-1093 - ANSI/UL711 7

CARBON DIOXIDE Amerex Corporation RUGGED 5 Year Warranty All Metal Valve Construction Rust free aluminum cylinders Durable High Gloss Polyester Powder Paint Temperature Range -22 F to 120 F USER FRIENDLY Meets Many Hospital Medical Equipment Requirements Large Loop Stainless Steel Pull Pin Model 322NM Independently Tested and Approved for use in MRI Facilities to 7 Tesla Model 322NM Has Sanitary White Paint Finish (easy to clean) Bar Coded and Bi-lingual Labels OPTION USCG Approved with Bracket Listed on UL Label MODELS 322 330 331 332 Also available in 50 / 100 lb. wheeled extinguishers and 100 lb. stationary. Model 322NM NONMAGNETIC MRI SAFE TO 7 TESLA (USES 17737 WALL HANGER - INCLUDED) CARBON DIOXIDE is discharged as a white cloud of snow which smothers a fire by eliminating oxygen. It is effective for Class B flammable liquids and is electrically non-conductive. Carbon Dioxide is a clean, non-contaminating, odorless gas. Nonmagnetic model available (Model 322NM - tested to 7 Tesla) 8 AGENT TYPE CARBON DIOXIDE VALVE TYPE CHROME PLATED BRASS DESIGN HORN HOSE & HORN MODEL NUMBER 322 322NM 330 331 332 UL RATING 5B:C 5B:C 10B:C 10B:C 10B:C CAPACITY (LBS.) 5 5 10 15 20 SHIPPING WT. (LBS.) 14 14 28.25 37.75 50.75 HEIGHT (IN.) 17.75 17.75 24 30 30 WIDTH (IN.) 8.25 8.25 12 12 13 DEPTH (IN.) 5.25 5.25 7 7 8 RANGE (INITIAL- FT) 3-8 3-8 3-8 3-8 3-8 DISCHARGE TIME (SEC.) 10 10 10 12.5 19 FM APPROVED YES YES YES YES YES INCLUDED BRACKET WALL NM WALL WALL WALL WALL Manufactured and Tested to ANSI/UL Standards Complies with NFPA 10 Standard ISO-9001 / ISO-14001 Certified UL LISTED CONFORMS TO TEST STANDARDS: CAN/ULC-S503 - ANSI/UL154 & CAN/ULC-S508 - ANSI/UL711 MADE IN U.S.A.

Amerex Corporation RUGGED 6 Year Warranty Stored Pressure Design Dependable Drawn Steel Cylinders Special corrosion resistant yellow (Class D) color coded paint finish All Metal Valve Construction Temperature Range -40 F to 120 F CLASS D USER FRIENDLY Unique soft flow extension applicator plus built in long range nozzle Large Loop Stainless Steel Pull Pin Bar Coded and Bi-lingual Labels MODELS B570 B571 The Amerex soft flow extension applicator is particularly suited for fighting Class D fires. It keeps the operator away from the extreme heat and toxic fumes caused by burning material. The easily controlled, even discharge provides a non-dispersing application of the agent. The applicator may be quickly detached to provide a straight stream of chemical where greater range, a narrow discharge pattern or a lobbing effect is required. MODEL B570 contains a special blended Sodium Chloride based dry powder extinguishing agent. Heat from the fire causes it to cake and form a crust excluding air and dissipating heat from burning metal. Metal fires involving magnesium, sodium, potassium and sodium-potassium alloys can be successfully extinguished with this extinguisher. There is data showing that zirconium, uranium, titanium, and powdered aluminum fires can be controlled and extinguished with this unique extinguisher. Extinguishing Capacity Available in 150 lb. Wheeled or Stationary Magnesium Chips: 4 ft 2 and/or 6 lbs. of metal Sodium or Potassium Spill: 5 ft 2 and/or 5 lbs.of metal Sodium or Potassium Spill Depth Over 1/2 : 3 ft 2 and or 6 lbs. of metal Sodium Potassium Alloy Spil: 3 ft 2 and/or 2 lbs. of metal MODEL B571 contains a copper extinguishing agent specially developed by the U.S. Navy for fighting lithium and lithium alloy fires. The copper compound smothers the fire and provides an excellent heat sink for dissipating heat. Copper powder has been found to be superior to all other known fire extinguishing agents for lithium. Extinguishing Capacity Available in 250 lb. Wheeled 4 ft 2 and/or 5 lbs. of lithium OPTIONAL MODEL 859 DOLLY CART PROVIDES FOR EASY TRANSPORT For Combustible Metal Fires AGENT TYPE SODIUM CHLORIDE COPPER VALVE TYPE CHROME PLATED BRASS DESIGN HOSE & HORN OR WAND APPLICATOR MODEL NUMBER B570 B571 CAPACITY (LBS.) 30 30 SHIPPING WT. (LBS.) 53 53 HEIGHT (IN.) 35 35 WIDTH (IN.) 13 13 DEPTH (IN.) 8 8 RANGE (INITIAL- FT) 3-6 3-6 DISCHARGE TIME (SEC.) 24 18 FM APPROVED YES YES INCLUDED BRACKET WALL WALL MADE IN U.S.A. Manufactured and Tested to ANSI/UL Standards Complies with NFPA 10 Standard ISO-9001 / ISO-14001 Certified FM APPROVED CONFORMS TO TEST STANDARDS: CAN/ULC-S504 - ANSI/UL299 & CAN/ULC-S508 - ANSI/UL711 9

ABC DRY CHEMICAL Amerex Corporation RUGGED 6 Year Warranty Stored Pressure Design Dependable Drawn Steel Cylinders Durable High Gloss Polyester Powder Paint All Metal Valve Construction Brass Valve - Heavy Duty Chrome Plated Brass Valve Body Stainless Steel Handle & Lever Aluminum Valve - Light to Medium Duty Anodized Aluminum Valve Body Anodized Aluminum Handle & Lever Temperature Range -65 F to 120 F USER FRIENDLY Easy and More Economical to Maintain and Service Large Loop Pull Pin Bar Coded and Bi-lingual Labels OPTION USCG Approved with Bracket Listed on UL Label Aluminum Valve B417/T B500/T B402/T B443 B456 A411 Brass Valve B424 B461 B441 423 Available in Wheeled and Stationary Extinguishers ABC or Multi-Purpose extinguishers utilize a specially fluidized and siliconized mono ammonium phosphate dry chemical. It chemically insulates Class A fires by melting at approximately 350 F and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires and will not conduct electricity back to the operator. Largest selection of size and extinguisher options available AGENT TYPE ABC DRY CHEMICAL VALVE TYPE ANODIZED ALUMINUM CHROME PLATED BRASS DESIGN NOZZLE HOSE & NOZZLE HOSE & NOZZLE MODEL NUMBER B417/B417T B500/B500T B402/B402T B443 B456 A411 B424 B461 B441 423 UL & ULC RATING 1A:10B:C 2A:10B:C 3A:40B:C 3A:40B:C 4A:80B:C 10A:120B:C 2A:10B:C 3A:40B:C 4A:80:B:C 10A:120B:C CAPACITY (LBS.) 2.5 5 5 6 10 20 5 6 10 20 SHIPPING WT. (LBS.) 5.25/5.5 9.25/9.5 9.25/9.5 12.75 18 38 10.5 13.75 19 39 HEIGHT (IN.) 15.5 15.25 15.25 16 20 24 15.5 16.25 20.5 24 WIDTH (IN.) 5.75 7.25 7.25 7.75 7.75 10.25 8 8.5 8.75 10.25 DEPTH (IN.) 3 4.25 4.25 5 5 7 4.25 5 5 7 RANGE (INITIAL- FT) 9-15 12-18 12-18 15-21 15-21 15-21 12-18 15-21 15-21 15-21 DISCHARGE TIME (SEC.) 10 14 14 14.5 20 30 14 14 20 30 FM APPROVED YES YES YES YES YES YES OPTIONAL CHROME CYLINDER YES YES YES YES YES YES YES YES INCLUDED BRACKET WALL/VEHICLE WALL WALL WALL 10 Manufactured and Tested to ANSI/UL Standards Complies with NFPA 10 Standard ISO-9001 / ISO-14001 Certified UL LISTED MADE IN U.S.A. CONFORMS TO TEST STANDARDS: CAN/ULC-S504 - ANSI/UL299 & CAN/ULC-S508 - ANSI/UL711

Amerex Corporation RUGGED 6 Year Warranty Stored Pressure Design Dependable Drawn Steel Cylinders Durable High Gloss Polyester Powder Paint All Metal Valve Construction Brass Valve - Heavy Duty Chrome Plated Brass Valve Body Stainless Steel Handle & Lever Aluminum Valve - Light to Medium Duty Anodized Aluminum Valve Body Anodized Aluminum Handle & Lever Temperature Range -65 F to 120 F USER FRIENDLY Easy and More Economical to Maintain and Service Large Loop Pull Pin Bar Coded and Bi-lingual Labels Aluminum Valve A620T B403/T B409T B453 B457 A412 Brass Valve B462 B447 408 REGULAR DRY CHEMICAL OPTION USCG Approved with Bracket Listed on UL Label Available in Wheeled and Stationary Extinguishers REGULAR extinguishers contain a siliconized sodium bicarbonate based dry chemical with free flowing and non-caking additives. Economical Class B & C protection with lower initial cost and recharging. This chemical smothers fires in flammable liquids and pressurized gases and will not conduct electricity back to the operator. Largest selection of size and extinguisher options available AGENT TYPE REGULAR DRY CHEMICAL VALVE TYPE ANODIZED ALUMINUM CHROME PLATED BRASS DESIGN NOZZLE HOSE & NOZZLE MODEL NUMBER A620T B403/B403T B409T B453 B457 A412 B462 B447 408 UL & ULC RATING 2B:C 10B:C 10B:C 40B:C 60B:C 120B:C 40B:C 60B:C 120:B:C CAPACITY (LBS.) 1 2.5 5 5.5 10 20 6 10 20 SHIPPING WT. (LBS.) 2.5 5.5 9.25 9.75 18 38 13.75 19 39 HEIGHT (IN.) 10 15.5 15.25 15.25 20 24 16.25 20.25 24 WIDTH (IN.) 3.5 5.75 5.5 7.25 7.75 10.25 8.5 8.75 10.25 DEPTH (IN.) 2.63 3 4.25 4.25 5 7 5 5 7 RANGE (INITIAL- FT) 5-8 9-15 12-18 12-18 15-21 15-21 15-21 15-21 15-21 DISCHARGE TIME (SEC.) 10 10 10 14 18 28 14 18 28 FM APPROVED YES YES YES YES YES YES YES OPTIONAL CHROME CYLINDER YES YES YES YES YES YES YES INCLUDED BRACKET VEHICLE WALL/VEHICLE VEHICLE WALL Manufactured and Tested to ANSI/UL Standards Complies with NFPA 10 Standard ISO-9001 / ISO-14001 Certified UL LISTED MADE IN U.S.A. CONFORMS TO TEST STANDARDS: CAN/ULC-S504 - ANSI/UL299 & CAN/ULC-S508 - ANSI/UL711 11

PURPLE K DRY CHEMICAL Amerex Corporation RUGGED 6 Year Warranty Stored Pressure Design Dependable Drawn Steel Cylinders Durable High Gloss Polyester Powder Paint All Metal Valve Construction Brass Valve - Heavy Duty Chrome Plated Brass Valve Body Stainless Steel Handle & Lever Aluminum Valve - Light to Medium Duty Anodized Aluminum Valve Body Anodized Aluminum Handle & Lever Temperature Range -65 F to 120 F USER FRIENDLY Easy and More Economical to Maintain and Service Large Loop Pull Pin Bar Coded and Bi-lingual Labels OPTION USCG Approved with Bracket Listed on UL Label Aluminum Valve B410T B479/T A413 Brass Valve B460 415 Available in Wheeled and Stationary Extinguishers PURPLE K extinguishers contain specially fluidized and siliconized potassium bicarbonate dry chemical which is particularly effective on Class B flammable liquids and pressurized gases. It is electrically non-conductive. Purple K has been the choice of oil, gas, chemical and utilities industries as the perfered fire fighting agent. Largest selection of size and extinguisher options available AGENT TYPE PURPLE K DRY CHEMICAL VALVE TYPE ANODIZED ALUMINUM CHROME PLATED BRASS DESIGN NOZZLE HOSE & NOZZLE MODEL NUMBER B410T B479/B479T A413 B460 415 UL & ULC RATING 10B:C 30B:C 120B:C 80B:C 120B:C CAPACITY (LBS.) 2.5 5 20 10 20 SHIPPING WT. (LBS.) 5.5 9.5 38 19 39 HEIGHT (IN.) 15.5 15.25 24 20.5 24 WIDTH (IN.) 5.75 7.25 10.25 8.75 10.25 DEPTH (IN.) 3 4.25 7 5 7 RANGE (INITIAL- FT) 9-15 12-18 15-21 15-21 15-21 DISCHARGE TIME (SEC.) 10 12 28 22 28 FM APPROVED YES YES YES YES OPTIONAL CHROME CYLINDER YES YES YES INCLUDED BRACKET VEHICLE WALL/VEHICLE WALL 12 Manufactured and Tested to ANSI/UL Standards Complies with NFPA 10 Standard ISO-9001 / ISO-14001 Certified UL LISTED MADE IN U.S.A. CONFORMS TO TEST STANDARDS: CAN/ULC-S504 - ANSI/UL299 & CAN/ULC-S508 - ANSI/UL711

Amerex Corporation RUGGED 12 Year Warranty Hot Dip Galvanized Drawn Steel Cylinders High Gloss Polyester Powder Paint (Best corrosion protection available) All Metal Valve Construction Gauge Guards - Chrome Plated Brass Protective Rubber Foot Rings Superior Range (Vertical & Horizontal) High (240 PSI) Operating Pressure Temperature Range -65 F to 120 F CHOICE OF CHEMICALS: ABC Multi Purpose, Regular, Purple K SELECT FAST FLOW FOR: High Flow Rate Fast Discharge Quicker Knockdown More Operator Protection SELECT COMPLIANCE FLOW FOR: Long Range Highest UL Ratings USER FRIENDLY Wide Grip Allows Clearance for Gloved Hand Large Loop Stainless Steel Pull Pin Bar Coded and Bi-lingual Labels OPTION USCG Approved with Bracket Listed on UL Label Hot dip galvanized USCG brackets available Fast Flow 594 581 567 582 568 595 580 584 569 Compliance Flow 592 564 589 599 566 591 Available in 125 and 250 lb. Wheeled and Stationary extinguishers Dry Chemical HIGH PERFORMANCE HIGH PERFORMANCE extinguishers are the ultimate choice in fire extinguishers for high hazard, frequent use and extreme environment applications. Economical - less initial cost, lower maintenance costs and greater reliability than cartridge operated extinguishers. Lower initial cost and lower costs to maintain AGENT TYPE ABC DRY CHEMICAL REGULAR DRY CHEMICAL PURPLE K DRY CHEMICAL ABC DRY CHEMICAL PURPLE K DRY CHEMICAL PERFORMANCE FAST FLOW COMPLIANCE FLOW VALVE TYPE CHROME PLATED BRASS WITH GAUGE GUARD DESIGN HOSE & NOZZLE MODEL NUMBER 594 581 567 582 568 595 580 584 569 592 564 589 599 566 591 UL & ULC RATING 2A:40:BC 4A:40B:C 4A:40B:C 40B:C 40B:C 40B:C 40B:C 20B:C 40B:C 4A:80B:C 10A:120B:C 10A:160B:C 80B:C 120B:C 160B:C CAPACITY (LBS./KG) 13.2/6 20/9 30/13.6 20/9 30/13.6 13.2/6 20/9 20/9 30/13.6 13.2/6 20/9 30/13.6 13.2/6 20/9 30/13.6 SHIPPING WT. (LBS.) 31 42.5 58 42.5 58 31 42.5 42.5 58 31 42.5 58 31 42.5 58 HEIGHT (IN.) 17.5 24.75 26.5 24.75 26.5 17.5 24.75 24.75 26.5 17.5 24.75 26.5 17.5 24.75 26.5 WIDTH (IN.) 10.5 10.5 11 10.5 11 10.5 10.5 10.5 11 10.5 10.5 11 10.5 10.5 11 DEPTH (IN.) 7 7 8 7 8 7 7 7 8 7 7 8 7 7 8 RANGE (INITIAL- FT) 40-50 40-50 40-50 40-50 40-50 DISCHARGE TIME (SEC.) 15 18 21 15 17 15 15 10 16 22 30 34 22 29 34 AVERAGE DISCHARGE RATE.94 1.20 1.60 1.40 1.76.94 1.44 2.00 1.88.59.65.95.61.67.81 (LBS./SEC.) INCLUDED BRACKET WALL WALL WALL WALL WALL Manufactured and Tested to ANSI/UL Standards Complies with NFPA 10 Standard ISO-9001 / ISO-14001 Certified UL LISTED MADE IN U.S.A. CONFORMS TO TEST STANDARDS: CAN/ULC-S504 - ANSI/UL299 & CAN/ULC-S508 - ANSI/UL711 13

HIGH FLOW Dry Chemical Amerex Corporation RUGGED 6 Year Warranty Stored Pressure Design Dependable Drawn Steel Cylinders Durable High Gloss Polyester Powder Paint All Metal Valve Construction Brass Valve - Heavy Duty Chrome Plated Brass Valve Body Stainless Steel Handle & Lever Twice the Flow Rate of Standard Models Meets DOT Requirements Temperature Range -65 F to 120 F USER FRIENDLY Easy and More Economical to Maintain and Service Large Loop Stainless Steel Pull Pin Bar Coded and Bi-lingual Labels MODELS (10 LB) 720 721 722 MODELS (20 LB) 760 761 762 OPTION USCG Approved with Bracket Listed on UL Label ABC, Regular, or Purple K Chemical HIGH FLOW portable fire extinguishers for applications where discharge rates exceeding one pound per second are required as specified in NFPA 10. These extinguishers utilize the same hardware and are manufactured to the same U.L. specifications as Amerex compliance rated products. HIGH FLOW - Exceeds 1 lb. per second discharge rate AGENT TYPE ABC ABC REGULAR REGULAR PURPLE K PURPLE K MODEL NUMBER 720 760 721 761 722 762 CAPACITY (LBS.) 10 20 10 20 10 20 APPLICATION HOSE & NOZZLE HOSE & NOZZLE HOSE & NOZZLE U/L RATING 1A:20B:C 4A:60B:C 20B:C 60B:C 20B:C 60B:C SHIPPING WEIGHT (LBS.) 19 39 19 39 19 39 DISCHARGE TIME (SEC.) 10 19 10 20 11 20 DISCHARGE RATE (LBS./SEC.) 1.22 1.14 1.15 1.13 1.15 1.08 DISCHARGE RANGE (FT.) 15-25 15-25 15-25 15-25 15-25 15-25 HEIGHT (IN.) 20½ 24 20½ 24 20½ 24 WIDTH (IN.) 8¾ 10¼ 8¾ 10¼ 8¾ 10¼ DEPTH (IN.) 5 7 5 7 5 7 TEMPERATURE RANGE ( F) -65 F to 120 F INCLUDED BRACKET WALL WALL WALL 14 Manufactured and Tested to ANSI/UL Standards Complies with NFPA 10 Standard ISO-9001 / ISO-14001 Certified UL LISTED MADE IN U.S.A. CONFORMS TO TEST STANDARDS: CAN/ULC-S504 - ANSI/UL299 & CAN/ULC-S508 - ANSI/UL711

WATER & FOAM CHARGES Charge 502, 8 oz. bottle AFFF Model 250 & 254 Charge 504, 38½ oz. bottle FFFP Model 252 Charge 506, 10 lb. carton Loaded Stream/Anti-Freeze Model 240 Charge 506, 55 gal. drum Loaded Stream/Anti-Freeze - Model 240 Charge 534, 2 gal. pail FFFP Model 630 & 631 Wheeled WET CHEMICAL CHARGES Charge 530-2, two 6 liter bottles Model B260 Charge 660-2, two 2½ gal. bottles Model B262 WATER MIST CHARGES Charge 670-2, two 1¾ gal. bottles Model B270NM Charge 671-2, two 2½ gal. bottles Model B272NM HALOTRON I CHARGES Charge 890, 35 lb. cylinder Charge 891, 80 lb. cylinder Charge 892, 200 lb. cylinder RECHARGE AGENTS CLASS D DRY POWDER CHARGES Charge 543, 35 lb. pail Graphite (G-Plus) Charge 532, 300 lb. drum Graphite (G-Plus) [Graphite applied to a metal fire using scoop or shovel] Charge 557, 30 lb. pail Sodium Chloride (Super D) Model B570 & 680 Charge 545, 50 lb. pail Sodium Chloride (Super D) Model B570 & 680 [Sodium Chloride (Super D) may also be dispensed by a scoop or shovel} Charge 548, 50 lb. pail Copper (Navy 125S) Model B571 & 681 ABC DRY CHEMICAL CHARGES Charge 552, 25 lb. pail Charge 550, 50 lb. pail Charge 555, 50 lb. pail Model B402 Charge 540, 40 lb. carton Charge 540-4, four 10 lb. bags in 40 lb. carton Charge 509, 400 lb. drum REGULAR DRY CHEMICAL CHARGES Charge 512, 50 lb. pail Charge 541, 40 lb. carton Charge 541-4, four 10 lb. bags in 40 lb. carton Charge 511, 400 lb. drum PURPLE K DRY CHEMICAL CHARGES Charge 553, 25 lb. pail Charge 515, 50 lb. pail Charge 542, 40 lb. carton Charge 542-4, four 10 lb. bags in 40 lb. carton Charge 517, 400 lb. drum MADE IN U.S.A. 15

BRACKET TYPES Wall Hanger Brackets 01007 (Red) 14315 (NM) 0546 0575 0577 17737 (NM) 04834 01521 05525 09582 09581 16591 10 lb. Wall Strap Type 16536* 16538* 16537 * Galvanized Bracket Adapters 16594 16598 16596 889 889HB 846 Vehicle / Marine / Aviation Brackets 845 817 818 817S 818S 821 821S 861H 808 Heavy Duty Box Type Vehicle Brackets (Red Brackets are Galvanized) 807 809 812 809G 810G 811G 811 810 / 810NM 810CG (USCG) 895 Heavy Duty Dolly Cart Heavy Duty Rubber Strap Brackets I Beam Brackets Exterior & Interior 868-6, 8, 10, 12 16 859 860 862 864 872-6 to 8, 10 to 12

AGENT TYPE SIZE (CAPACITY) MODEL CYL. DIA. (INCH) INCLUDED BRACKET USCG BRACKET OPTIONAL BRACKETS RUBBER STRAP BRACKETS WATER 2.5 GAL. 240 7 01007 WALL N/A 810 864 YES WATER MIST AFFF FOAM 1.75 GAL. B270NM 7 14315 WALL N/A 810NM N/A 2.5 GAL. B272NM 7 14135 WALL N/A 810NM N/A 6 LITER 254 7 01007 WALL N/A 810 864 859 DOLLY OPTION 2.5 GAL. 250 7 01007 WALL N/A 810 864 YES FFFP FOAM 2.5 GAL. 252 7 01007 WALL N/A 810 864 YES WET CHEMICAL HALOTRON I HALON 1211 ABC DRY CHEMICAL REGULAR DRY CHEMICAL PURPLE K DRY CHEMICAL CARBON DIOXIDE HIGH PERFORMANCE DRY CHEMICAL FAST FLOW AND COMPLIANCE FLOW HIGH FLOW EXTINGUISHERS CLASS D DRY POWDER 6 LITER B260 7 01007 WALL 810 810 N/A 2.5 GAL. B262 7 01007 WALL 810 810 N/A YES 6 LITER B260CG 7 01007 WALL 810CG N/A N/A 2.5 GAL. B262CG 7 01007 WALL 810CG N/A N/A 1.4 LB. A384T 2.88 845 VEHICLE N/A N/A N/A 2.5 LB. B385TS 4.25 817S AIRCRAFT N/A 817S 860 5 LB. B386T 4.25 818 V/MARINE 818, 821, 861H 818S, 821, 821S, 807 860 5.5 LB. B394TS 4.25 818S AIRCRAFT N/A N/A N/A 11 LB. 397 6 00575 WALL 812 812 N/A 15.5 LB. 398 6 00575 WALL 812 812 N/A 1.25 LB. A344T 2.88 845 VEHICLE N/A N/A N/A 2.5 LB. C352TS 3 817S AIRCRAFT N/A N/A 860 3 LB. C354TS 3 817S AIRCRAFT N/A N/A 860 5 LB. B355T 4.25 818 V/MARINE 818, 821, 861H 818S, 821, 821S, 807 860 9 LB. B369 5 00546 WALL 808, 809 808, 809, 889HB 862 13 LB. B371 5 01007 WALL 809 846, 809, 889HB 862 17 LB. 361 7 00577 WALL 810 810 864 YES 2.5 LB. B417 / B417T 3 4834 WALL / 817 VM 817 817S 860 5 LB. B402 / B402T 4.25 16591 WALL / 818 VM 818, 821, 861H 818S, 821, 821S, 807 862 5 LB. B500 / B500T 4.25 16591 WALL / 818 VM 818, 821, 861H 818S, 821, 821S, 807 862 5 LB. B424 4.25 16591 WALL 821, 861H 821, 821S, 807 862 6 LB. B443 5 05525 WALL 808, 809, 895 808, 809, 889, 895 862 6 LB. B461 5 00546 WALL 808, 809, 895 808, 809, 889, 895 862 10 LB. B456 5 00546 WALL 808, 809, 895 808, 809, 889, 889HB, 895 862 10 LB. B441 5 01007 WALL 809, 895 808, 809, 889HB, 895 862 20 LB. A411 7 00577 WALL 810 810 864 YES 20 LB. 423 7 00577 WALL 810 810 864 YES 1 LB. A620T 2.88 845 VEHICLE N/A N/A N/A 2.5 LB. B403 / B403T 3 4834 WALL / 817 VM 817 817S 860 5 LB. B409T 4.25 818 V/MARINE 818, 821, 861H 807, 818, 821, 861H 862 5.5 LB. B453 4.25 16591 WALL 818, 821, 861H 807, 818, 821, 861H 862 6 LB. B462 5 00546 WALL 808, 809, 895 808, 809, 889HB, 895 862 10 LB. B447 5 01007 WALL 809, 895 809, 846, 889HB, 895 862 10 LB. B457 5 00546 WALL 809, 895 809, 846, 889HB, 895 862 20 LB. A412 7 00577 WALL 810 810 864 YES 20 LB. 408 7 00577 WALL 810 810 864 YES 2.5 LB. B410T 3 817 V/MARINE 817 817S 860 5 LB. B479 / B479T 4.25 16591 WALL / 818 VM 818, 821, 861H 807, 818S, 821, 821S, 861H 860 10 LB. B460 5 01007 WALL 809, 895 809, 846, 889HB 862 20 LB. A413 7 00577 WALL 810 810 864 YES 20 LB. 415 7 00577 WALL 810 810 864 YES 5 LB. 322 5.25 00546 WALL 809 809 862 5 LB. 322NM 5.25 17737 WALL N/A N/A N/A 10 LB. 330 7 00575 WALL 810 810 N/A 15 LB. 331 7 00575 WALL 810 810 864 YES 20 LB. 332 8 00577 WALL 811 811 864 YES 13.2 LB. (6 KG) 20 LB. (9 KG) 30 LB. (13.6 KG) 594, 592, 595, 599 581, 582, 580, 584, 564, 566 567, 568, 569 589, 591 7 09582 WALL 7 09852 WALL 8 09581 WALL 810 & 810G 810 & 810G 811 & 811G 810 & 810G 810 & 810G 811 & 811G 10 LB. 720, 721, 722 5 01007 WALL 809, 895 808, 809, 889HB, 895 862 N/A 864 & 874 YES 864 YES 20 LB. 760, 761, 762 7 00577 WALL 810 810 864 YES 30 LB. B570 8 00577 WALL N.A 811 864 YES 30 LB. B571 8 00577 WALL N/A 811 864 YES All Amerex brackets are quality made and manufactured of steel with a powder coated paint. The paint finish assures many years of use and meets the latest UL salt spray requirements (240 hrs. @ 20% salt solution - ASTM B117). BRACKET REFERENCE 17

WHEELED Wheeled Extinguishers The largest variety of QUALITY wheeled fire extinguishers available anywhere. All available in a Stationary configuration (except 50 lb. Carbon Dioxide). See Amerex Wheeled Fire Extinguishers brochure for more details. DRY CHEMICAL STORED PRESSURE Models 495, 496, 497 50 lb. Dry Chemical Models 573, 574, 575, 690 HIGH PERFORMANCE 125 / 250 lb. Dry Chemical Models 488, 489, 490 125/150 lb. Dry Chemical DRY CHEMICAL NITROGEN CYLINDER OPERATED Models 450, 451, 452 125/150 lb. Dry Chemical Models 467, 468, 469 125/150 lb. Dry Chemical Models 470, 471, 472 125/150 lb. Dry Chemical Models 491, 492, 493 300/350 lb. Dry Chemical CLASS D FOAM CARBON DIOXIDE HALOTRON I 18 Model 680 150 lb. Sodium Chloride Model 681 250 lb. Copper Model 630 33 gal. FFFP Foam Model 333 50 lb. Carbon Dioxide Model 334 100 lb. Carbon Dioxide Models 673, 674, 675 65 lb. / 150 lb. Halotron I

Amerex Fire Suppression Systems Vehicle Fire Suppression Systems: Amerex Vehicle Fire Suppression Systems may make it easier to obtain insurance and also help you qualify for lower premiums. As the costs of heavy duty vehicles increase, insurance rates escalate accordingly. Many insurance companies have recognized a reduction in claims paid out due to the presence of a fixed vehicle fire suppression system. The Amerex Fire Suppression System will lower your fire risk, which can lower your insurance premiums. The key phrase is material change of risk. Ask your insurance agent. AMGADS III: Amerex Mobile Gas Detection System - (3rd Generation) gas monitoring system is a pre-engineered system designed to be utilized on any type of alternatively fueled vehicle. The system can be installed by the vehicle OEM or retrofitted. Its advanced technology can detect: Compressed Natural Gas (CNG), Liquified Natural Gas (LNG), Propane (LPG), Hydrogen and any other hydrocarbon fuel vapors. SMALL BUS SYSTEM: The Amerex Small Vehicle System (SMVS) is designed specifically for applications involving front engine vehicles such as Para-Transit, Airport Shuttle buses and other small front engine vehicles. The SMVS kit includes all hardware and components required for a complete turn-key Automatic Fire Suppression System. The electronics portion of the system is made up of a Vehicle Operator Display with Manual Release Push Button, a wiring Interface Module, and two Solid State Heat Detectors. The system is continuously supervised by the system panel which can detect and actuate the system even when the vehicle is not in use. KP RESTAURANT SYSTEM: The Amerex KP Restaurant System is a pre-engineered, wet chemical, stored-pressure type with a fixed nozzle agent distribution network. The system is listed by Underwriter s Laboratories, Inc., ULC and tested to U.L. Standard 300. The system shall be designed, installed and maintained in accordance with: Amerex Part No. 20150 Design, Installation and Maintenance Manual, N.F.P.A. 96, N.F.P.A. 17A, local codes and ordinances by an Authorized Amerex KP Systems Distributor using factory trained personnel. ZONE DEFENSE RESTAURANT SYSTEM: The Zone Defense Restaurant Fire Suppression System is a pre-engineered, wet chemical, storedpressure type with a fixed nozzle agent distribution network manufactured by Amerex Corporation. The system is listed by Underwriter s Laboratories, Inc., ULC and tested to UL Standard 300. The system shall be designed, installed and maintained in accordance with: Amerex Part No. 20150 Design, Installation and Maintenance Manual, N.F.P.A. 96, N.F.P.A. 17A, local codes and ordinances by an Authorized Amerex Zone Defense Systems Distributor using factory trained personnel. The Zone Defense system is fully self-contained and does not require electrical power or connection to either domestic water supply or fire sprinkler supply lines. SUPPRESSION SYSTEMS AUTOMATIC INDUSTRIAL DRY CHEMICAL SYSTEM: The Amerex IS system uses our exclusive ABC (Model 555) dry chemical. ABC dry chemical suppresses more fire, by volume, than any other agent, has quick flame knock-down and can help to secure Class A fires against re-ignition. Since many hazards involve a variety of fuel sources, our ABC dry chemical, with protection against Class A (wood, paper, pulp), Class B (flammable liquids) and Class C (live electrical equipment) is the agent that is best suited for most Industrial hazards. PRE-ENGINEERED CLEAN AGENT SYSTEM: Utilizing an industry recognized fire suppression agent FM-200 or NOVEC 1230, Amerex has developed an affordable pre-engineered waterless fire suppression system to protect areas with sensitive electrical equipment and valuable data. The modular design incorporates pre-assembled wiring harnesses and keyed locking connectors on all electrical components to assist you in a simple and confident installation. Agent tanks are sized to meet the needs of the protected space. The Amerex CPS is monitored by an electrical control panel that has a battery back-up for 24 hour protection during power failure. Rapid responding smoke detectors are used for detection and are cross zoned to reduce the potential for unwanted system discharge. A bell and horn/strobe device alarm when fire conditions are present. All electrical circuits are supervised and factory terminated. PLEASE SEE INDIVIDUAL SYSTEMS BROCHURES FOR MORE INFORMATION AVAILABLE TO AUTHORIZED DISTRIBUTORS AND FACTORY TRAINED PERSONNEL 19

The Amerex KP automatic restaurant fire suppression system protects the hood, duct and appliances. In either automatic or manual actuation the system works in this manner: 1. When a fire starts, the detection network, consisting of fusible links or pneumatic tubing, will automatically detect the fire or the manual pull station can be used, releasing a low ph agent throughout the hood, duct and onto the appliances. 2. Either method of actuation will interrupt gas or electrical power to the appliances preceding system discharge. 3. The Amerex KP agent quickly suppresses the fire and cools the fuel while securing the vapors with a smothering foam reaction. The combination of the Amerex KP system and an Amerex Model B260 or B262 Wet Chemical extinguisher provides restaurants with a ONE-TWO attack against the threat of business loss due to cooking operation fires. CORNER PULLEY AMEREX KP SYSTEM AGENT CYLINDER CEILING TILE AMEREX KP SYSTEM MRM CONTROL BOX AMEREX KP SYSTEM MANUAL PULL STATION AMEREX MODEL B260 WET CHEMICAL KITCHEN USE EXTINGUISHER AMEREX MECHANICAL GAS VALVE OR APPROVED / LISTED EXISTING * Amerex warrants hardware for 3 years against manufacturing defects

RESTAURANT KITCHEN GAS APPLIANCES PROTECTED BY: AMEREX KP RESTAURANT FIRE SUPPRESSION SYSTEM SPECIFICATIONS GENERAL: The Amerex KP Restaurant System is a pre-engineered, wet chemical, stored-pressure type with a fixed nozzle agent distribution network. The system is listed by Underwriter s Laboratories, Inc., ULC and tested to U.L. Standard 300. The system shall be designed, installed and maintained in accordance with: Amerex Part No. 12385 Design, Installation and Maintenance Manual, N.F.P.A. 96, N.F.P.A. 17A, local codes and ordinances by an Authorized Amerex KP Systems Distributor using factory trained personnel. AGENT: The system agent is Amerex KP liquid fire suppressant, a potassium acetate based solution that suppresses cooking grease fires both through saponification and cooling. The agent has a ph of 9 or less and does not harm stainless steel surfaces. AGENT CYLINDERS: (2.75, 3.75, 4.75, AND 6 GALLONS) The agent cylinders are mild steel DOT 4BW 240 specification cylinders, tested to 480 PSI (3309 kpa). The agent cylinder/discharge valve assembly is fully factory charged with Amerex KP liquid agent and pressurized to 240 PSI (1655 kpa). MECHANICAL RELEASE MODULE (MRM): The mechanical release module is the spring-loaded type using a mechanical input and electrical, mechanical or pneumatic outputs. It is capable of actuating from one to ten agent cylinder/ valve assemblies using one nitrogen cylinder and is operated either automatically by the detection network or manually by a remote manual pull station. The MRM enclosure, available in either stainless steel or red painted steel has a system status indicator and a window to observe the nitrogen cylinder pressure. The enclosure has provisions for applying tamper seals after final testing or periodic maintenance. The MRM enclosure has knockouts on three sides (top, bottom & right) to accept conduit. The MRM has two SPDT micro switches pre-installed. MRM DETECTION: The detection network uses a continuous cable run with detectors specifically listed for use with the Amerex KP system. MRM LINEAR FUSIBLE LINK DETECTION: The link to link system consists of four major components - conduit connector, cable segment beginning and end, conduit box, and link to link cable segment. The link to link cable segment ensures that the links are equally spaced at 24 center to center and yields continuous linear detection from end to end of the hood. PNEUMATIC RELEASE MODULE (PRM): The PRM offers superior detection by using a linear pneumatic detection system. The PRM detection system consists of the PRM, tubing and end of line fitting. The tubing is pressurized through a small accumulator inside the enclosure, routed throughout the hazard area. When exposed to a fire condition, the tubing ruptures, relieving all of the pressure in the tubing and accumulator thus firing the system using a nitrogen cylinder. The PRM comes complete with enclosure, accumulator, end of line fitting, connector for mechanical manual pull, two SPDT microswitches, and knock-outs. It is capable of actuating up to 10 cylinders and releasing 2 gas valves. Available in stainless or red enclosure. ACTUATION CYLINDER: The actuation cylinder is filled with 10 cu. in. of nitrogen and has an integral pressure gauge which allows easy field verification of pressure. This cylinder is capable of being refilled in the field by an Authorized Amerex KP Systems Distributor. AGENT CYLINDER BRACKET: The agent cylinder bracket is steel, painted red, with a factory supplied discharge hose, pipe outlet or discharge fitting. STAINLESS STEEL ENCLOSURE (Optional): An enclosure housing an MRM and one agent cylinder is available. The pressure gauges for the nitrogen cylinder and the agent cylinder are visible without removing the front cover of the cabinet. Also available in a stainless steel single agent cylinder enclosure. DISCHARGE NOZZLES: Discharge nozzles are made of chrome-plated brass, and shall consist of a one piece tip/body, strainer and blow off cap. MANUAL PULL STATIONS: The manual pull stations are a dual action type. Both a ring pin and lever must be pulled in order to discharge the system manually. MECHANICAL GAS VALVES - ¾ TO 3 INCH SIZES: A brass body mechanical gas valve, specifically listed by U.L. for use with the Amerex KP system, shall be installed for automatic shut off of gas whenever gas appliances are used. The valve has a pull to close design requiring a pull force to trip a latch which holds the valve in the open position. The cover of the gas valve has a visual indicator showing the valve s position. Existing mechanical valves, if operating, may be used according to the listed manual. ELECTRICAL GAS VALVE ¾ TO 3 INCH SIZES: If an electrically operated gas valve is required, it must be U.L. Listed for use with the Amerex KP system and operate by using a micro switch and a U.L. listed manual reset relay. Upon system actuation, current to the solenoid is interrupted by a micro-switch causing the gas valve to close. A manual reset relay must be used with electric gas valves. ELECTRIC MICRO-SWITCH: U.L. listed electric micro switches are provided to accomplish system output functions. The switches are stackable inside the MRM / PRM without requiring extra mounting hardware. From 1 to 4 sets of dry form C contacts are available. Two factory installed micro-switches are provided.

Amerex recognized and addressed the unique hazards of modern restaurant cooking by creating the Model B260 and B262 Class K Wet Chemical Kitchen Use fire extinguisher. This extinguisher along with the research and tests to develop it has changed the way that NFPA regards cooking grease fires. After July 1, 1998, all new installations of fire extinguishers protecting cooking hazards require a Class K extinguisher. This class recognizes the unique nature of cooking grease which requires not only extinguishment but the cooling effect which is best obtained with WET CHEMICAL extinguishers. When the KP System is used in combination with the Amerex Model B260 or B262 you have the perfect two step attack for kitchen fire suppression! NFPA-10 (5.7.1) Class K fire extinguishers shall be provided for hazards where there is a potential for fires involving combustible cooking media (vegetable or animal oils and fats). THE ORIGINAL CLASS K EXTINGUISHER! ISO 9001:2001 ISO 14001:2004 CERTIFIED For more information please contact: AMEREX CORPORATION P.O. Box 81 Trussville, AL 35173-0081 Phone: (205) 655-3271 Fax: 800-654-5980 E-Mail: sales@amerex-fire.com Web Page: www.amerex-fire.com Revised: 06/05

Our products aren t always obvious, but the reasons for selecting them are. Quality is Behind the Diamond.

The attraction of a diamond can t be fully explained by its flawlessness. The long odds against its ever being created adds a luster all of its own. After all, a diamond isn t just perfection, it s rare perfection. Making it the perfect symbol for our logo and our aspirations. Over the years our diamond has earned its own reputation for a unique level of quality, the result of a fusion of commitment, innovation and experience. All of which become apparent when you look closely. Quality is Behind the Diamond.

They re not even close. When it comes to restaurant fire suppression, our competitors can t come close to us, literally. For proof just examine the nozzle placement of our Zone Defense system. You might have to look carefully since our nozzles are tucked higher up in the hood than the competitor s design. The Amerex KP systems are inherently more effective and use fewer nozzles. But don t think that means our systems are less capable. In fact, our restaurant fire suppression systems meet all industry safety standards. Do more with less. Besides having higher nozzle placement, our fire suppression systems use less Wet Chemical agent thanks to an overlapping spray design (an innovation we pioneered). We don t require you to route piping to an external source. With Amerex, the agent is in a nearby tank. Everything is self-contained for lower maintenance costs.

Two choices. Same performance. Amerex KP Restaurant Fire Suppression System Amerex offers two systems to meet the industry s varying needs. With the Amerex KP Restaurant Fire Suppression System you get appliance-specific coverage that typically offers lower initial cost. The KP system is ideal for uses where appliance location is fixed such as in fast food chains, casual dining, cruise ships and school cafeterias. Amerex ZD Restaurant Fire Suppression System The Amerex ZD Restaurant Fire Suppression System adds greater flexibility by letting you reconfigure a kitchen or move appliances without moving nozzles. Because of its adaptability, this system is the most cost effective choice over the life of the system. The ZD system was designed with fine dining, culinary schools, military facilities, hotels and hospitals in mind. DETECTION ACTUATION DISCHARGE

Peace of mind is part of each system. All Amerex Restaurant Fire Suppression Systems offer: Less agent, fewer nozzles and higher nozzle height Around the clock protection with automatic detection Three detection options fusible links, linear pneumatic and linear fusible link Wet Chemical agent with a low ph that s non-corrosive to stainless steel Pre-filled pressurized tank for reliability and ease of maintenance Listings with all major manufacturers of gas valves ANSI/UL300, ULC/ORD 125.6-1995, LPCB, CE marked, MEA and SOLAS listings

A tradition of firsts. When you choose Amerex you re taking advantage of a history of innovation. Among our restaurant industry firsts are the self-contained, overlapping protection of our Zone Defense and the use of linear pneumatic tubing for detection. As the world leader in handheld fire extinguishers, we were uniquely qualified to create the first Wet Chemical fire extinguisher tested and approved for Class K listing by UL. The safest decision you ll ever make. We know you ve got a lot of choices. We also know fire suppression isn t something to take lightly. We never have and it shows in our innovation, quality and commitment to service. Amerex Corporation has been providing fire fighting products since 1971. We are the worldwide leader in hand portable and wheeled fire extinguishers. Our product line also includes vehicle fire suppression, gas detection, industrial systems and clean agent systems. And our products are made in the U.S.A.

Amerex Restaurant Systems Unique Advantages, Features and Benefits Amerex Corporation has been manufacturing restaurant systems since 1995. Amerex is ISO 9001:2000 and ISO 14001:2004 certified. The Amerex pre-engineered wet chemical restaurant extinguishing systems are listed with UL per UL300 fire test specifications, UL of Canada per ULC/ORD 1254.6 1995 and LPCB (Loss Prevention Certification Board) UK per LPS 1223 rev B. Amerex has over 600 distributors selling and installing our product in the US and abroad. Stored Pressure Agent Cylinders does not require filling in the field, avoiding additional costs and labor charges from the distributor doing the final hook-up. The agent cylinders are available in 4 sizes (Model 2.75, 3.75, 4.75 and 6 gallon). Listings with all major manufacturers of gas valves allows the mechanical contractor to use the existing valves or purchase the valve themselves, avoiding lost valves and accessories. Amerex offers multiple types of detection fusible links, linear fusible link and pneumatic tubing. More flow points The Amerex KP system can support up to 110 flow points without adding additional nitrogen cylinders or control equipment. Fewer nozzles total of 7 different nozzles to inventory, less opportunity for mistakes in final installation, simplified system design. The Zone Defense restaurant system offers overlapping coverage with nozzles placed every 20 inches using fewer agent cylinders than the competition. Superior coverage cover more appliances with fewer flow points, saves on agent cylinders, number of nozzles. Also, the largest fryer coverage on the market. Competitive pricing some of the lowest costs in the industry for a total system installation. Remote MRM or PRM (control device) agent cylinders can be located up to 100 feet away from the control head. Actuation line options ¼ pipe, high-pressure hose or ¼ copper tubing can be used for the actuation line vs. ¼ pipe only. MRM or PRM (control device) mounting flexibility Painted red enclosure, stainless steel enclosure, cabinet or OEM fabricated mounting.