CTC EcoZenith i50 Indoor module with heat pump control available in two heights The flexible indoor module with touchscreen and EnergyFlex. An efficient indoor module available in two heights with ample possibilities. CTC EcoZenith i50 is an efficient indoor module with built-in heat pump control. To achieve the perfect combination for a complete heat pump, install it together with the CTC EcoAir 06- or 5M air-to-water heat pumps. For those who prefer ground source, geothermal, or lake heating, CTC EcoPart 06- are ideal. With CTC EcoZenith i50, we guarantee legionella-free hot water. (Our solution produces hot water when and as it is needed.) CTC EcoZenith i50 is suitable for different heating systems: one- and two-pipe systems for radiators and convectors, as well as for floor heating. With the Mixing Valve Group accessory, you can control two different heating systems. For CTC EcoZenith i50, we opted for a technology that provides far more uniform heating. Radiators and underfloor heating are always at the right temperature thanks to the automatically-controlled mixing valve. Since the temperature is constant, annoying expansion sounds in the floor and pipes are absent. Now you can also get cool in summer; supplement with CTC Comfort (passive cooling unit in combination with CTC EcoPart) which uses the borehole s cool temperature for pleasant cool air. EnergyFlex gives you the freedom to supplement with other energy sources. Thanks to two ingenious connections, you can supplement with solar heat, or have a water-jacketed stove provide warmth. Connect a pool so you can also enjoy the warmth in summer. All CTC heat pumps and boilers are designed, developed and manufactured in our factory in Ljungby. This gives us total control of all stages of the production process from manufacture up to delivery of the finished product. Benefits EnergyFlex total flexibility to connect other heat sources Smart Grid ready to adapt to electricity prices Built-in heat pump control.-inch touchscreen Mixing valve for even heat without noise Easy to install Built-in low-energy circulation pump Available in two heights:,65/,6 mm Can be controlled from a smartphone with CTC Connect+ Find a CTC distributor in your country www.ctc-heating.com
Whenever you purchase a product from CTC, it essentially comes fully equipped, but there are a few smart accessories that can make life even easier. CTC Internet With CTC Internet and the CTC Connect+ app, you can monitor and control your system directly via your mobile phone. For instance, you can adjust the temperature or be alerted if the system shuts down for any reason. CTC Connect+ can be downloaded for free from the App Store or Google Play. CTC no.: 550 Adapt your product to your ceiling height Conceal pipe connections, etc. with a stylish housing cover. Housing covers are available in three heights and all are combinable to fit most ceiling heights. 6 mm (mounted on the product upon delivery) mm CTC no.: 5660R 5 mm CTC no.: 5660R CTC EcoVent III heat recovery unit with supply and exhaust air, able to ventilate a house with 5 m² of floor space and with a 65 litre/second exhaust air capacity. CTC EcoVent III recovers energy from ventilation air, heats the inflowing air, and ventilates the house. When a CTC EcoVent III is mounted to CTC EcoZenith i50 and run together with a CTC EcoAir air-to-water heat pump or a CTC EcoPart 00 geothermal heat pump, you can attain savings up to 0 % greater than conventional exhaust air heat pumps. CTC no.: 50600 CTC CFA - Exhaust Air Unit Allows for tidy and easy installation in buildings with mechanical exhaust air ventilation. The used air is vented out and new, fresh air is supplied to the building by the building's own air supply diffuser. CTC no.: 56500 CTC EcoVåf III - Exhaust Air Unit with recovery Designed to dock with CTC's geothermal/ground source heat pumps in buildings with mechanical exhaust air ventilation. Recovers heat from the exhaust air and raises the temperature of the brine, which produces a higher COP. CTC no.: 5600 CTC Wireless Room Sensor Place it anywhere in your house no need to run cables. Set the temperature that you want the heat pump to work towards. You can connect two room sensors to each product. CTC no.: 55500 Extra wireless room unit: CTC no.: 5550 Other accessories CTC no.: CTC Installation Kit EZ50 Everything you need to install your CTC EcoZenith i50 56 CTC EnergyFlex Kit 00 For flexible top connection of external systems 560 Conversion Kit EZ50H For converting to bottom connection 55000 CTC Expansion EnergyFlex External control of solar/pool/tank charging, etc. 500 CTC SMS Control GSM modem that easily plugs into the heat pump control 5550 CTC BMS/Internet For external, online control of your property via Modbus 5550 CTC Mixing Valve Group For installing an additional heating circuit 56500 CTC EcoComfort A passive cooling unit that uses the borehole's cool temperature 55000
. Lifting sleeve /" BSP. Socket for connecting external systems/ Charge pump for connecting heat pump (factory-fitted on i50l), current sensor, safety valve, room sensor, outdoor sensor, primary flow sensor and return flow sensor. Technical data x00 V i50 L i50 H CTC no. STANDARD INOX TARIF 566000 56600 56600 566000 56600 Weight (packaged weight) kg 6 () () Dimensions (width x depth x height) mm 55x6x65 55x6x6 Required ceiling height mm,65,0 00 V N~ 50Hz Output (with optional extra) kw 5 (+) Output range electric heater kw 0.- + 0.-6 Max. electric heater output @ group fuse 6/0/5 A kw +6 / 6+6 / +6 Ingress Protection (IP) Air-to-water: CTC EcoAir 5M-50M, 06-. Hot water performance (V max ) (volume 0 C) litres >00 Max. operating temperature (TS) C 0 ) The data provided applies to CTC EcoZenith i50 together with CTC EcoAir 06. Ecodesign data scale: A+++ to G +6 000 Fax: +6 6 55 P.O Box 0 SE- 6 Ljungby Sweden
. Lifting sleeve /" BSP. Socket for connecting external systems/ Charge pump for connecting heat pump (factory-fitted), current sensor, safety valve, room sensor, outdoor sensor, primary flow sensor and return flow sensor. Technical data x0 V i50 L CTC no. 5660 Weight (packaged weight) kg 6 () Dimensions (width x depth x height) mm 55x6x65 Required ceiling height mm,66 0V ~ 50Hz Output (adjustable electric heater:, 5,,, kw) kw Max. electric heater output @ group fuse 5/5/50/6 A kw - / 6 / / Enclosure class (IP) Air-to-water: CTC EcoAir 5M-50M, 06-. Hot water performance (Vmax) (volume 0 C) litres >00 Max. operating temperature (TS) C 0 ) The data provided applies to CTC EcoZenith i50 together with CTC EcoAir 06. Ecodesign data scale: A+++ to G +6 000 Fax: +6 6 55 P.O Box 0 SE- 6 Ljungby Sweden
. Lifting sleeve /" BSP. Socket for connecting external systems/ Charge pump for connecting heat pump (factory-fitted), current sensor, safety valve, room sensor, outdoor sensor, primary flow sensor and return flow sensor. Air-to-water: CTC EcoAir 5M-50M, 06-. Technical data x0 V i50 L CTC no. 56600 Weight (packaged weight) kg 6 () Dimensions (width x depth x height) mm 55x6x65 Required ceiling height mm,66 0V N~ 50Hz Output (adjustable electric heater:, 5,,, kw) kw Max. electric heater output @ group fuse 5/5/50/6 A kw / / / - Enclosure class (IP) Hot water performance (Vmax) (volume 0 C) litres >00 Max. operating temperature (TS) C 0 ) The data provided applies to CTC EcoZenith i50 together with CTC EcoAir 06. Ecodesign data scale: A+++ to G +6 000 Fax: +6 6 55 P.O Box 0 SE- 6 Ljungby Sweden