WiffenProducts Pty Ltd A.B.N. 95 073 810 616 1/33 Cedar Parade, Moolap, Victoria, Australia, 3221. Tel: (03) 5248 7072 Fax: (03) 5248 7272 ISSUE 3 / 2011
WiffenProducts boilingbilly
CONTENTS PAGE 2 ECONOMY SERIES PAGE 3 ST andard/supreme Series PAGE 4 ST andard/supreme series specifica Tions PAGE 5 MINI BOIL N CHILL PAGE 6 THE ORIGINAL UNDERSINK WA TER CHILLER PAGE 7 Boiling Billy - Green T PAGE 8 Green T boil n chill unit models PAGE 9 UL TIMIX BOIL N CHILL UNIT PAGE 10 COMBINED BOILING & CHILLED FIL TERED MODELS PAGE 11 THE ORIGINAL UNDERSINK BOILING BILLY PAGE 12 DUAL MA TE PAGE 13 AusTralian agents PAGE 14 WARRANTY
ECONOMYSERIES W all M oun T e D wi T h a remo V able F ron T cover and is simple To ser Vice if required Wall mounted. White coloured case. 2.5-7.5 litre. SpeciFica TIONS 1 CUP (200ml cups) Model Capacity Cups/Hr Rating No. of Cups No. Litres Recovery Kw Height Width Depth JR2.5 2.5 14 110 2.4 365 310 165 JR5 5 25 110 2.4 455 310 165 JR7.5 7.5 38 110 2.4 435 385 180 Specifications are subject to change without notice. boilingbilly WiffenProducts 2
SUPREMESERIES 2.5-10 litre Removable front cover. Internal pressure limiting valve. Computerised element. STANDARDSERIES 2.5-60 litre Removable front cover. Computerised element. Colourbond white cover. Stainless steel cover (optional) Larger units upon request WiffenProducts 03 boilingbilly
BOILINGBILLY Full Ser Vice NeTwork 7 year warranty on storage tank when fitted with a filter. One year - tap, ball valve and element. No costly parts. Simple to service if required. OpTional extras Swivel taps, Twin taps, Water filters, 3.0, 4.8, 6 & 9kw rating. Units can be manufactured to suit your needs. How To specify : Determining how many cups of boiling water required at one time, then specify the corresponding model. If you require larger element, place kw rating after the model number, for stainless steel case place SS. Typical InsT alla Tion Wallmounted series Electrical Certification No. Q051102 Cut out for concealed plumbing SpeciFica TIONS One Cup (200ml) Model Capacity No. Of Cup/Hr Rating Height Width No. Cups Recovery Kw mm mm Boiling Billy SBB 2.5 2.5 14 110 2.4 460 390 Supreme Series SBB 5 5 25 110 2.4 460 390 SBB 7.5 7.5 38 110 2.4 550 390 SBB 10 10 50 110 2.4 550 390 JE 2.5 2.5 14 110 2.4 365 390 JE 5 5 25 110 2.4 455 390 JE 7.5 7.5 38 110 2.4 550 390 Boiling Billy JE 10 10 50 110 2.4 550 390 Standard Series JE 15 15 75 110/160 2.4/3.0 535 600 White, JE 20 20 100 110/160 2.4/3.0 535 600 Colourbond or JE 25 25 125 110/160 2.4/3.0 635 600 Stainless steel JE 30 30 150 110/160 2.4/3.0 635 600 cases. JE 40 40 200 110/160 2.4/3.0 775 600 JE 50 50 250 110/160 2.4/3.0 775 600 JE 60 60 300 110/160 2.4/3.0 840 600 Depth mm 190 190 190 190 180 180 180 180 250 250 250 250 250 250 250 Specifications are subject to change without notice. Larger units available upon request. boilingbilly WiffenProducts 04
MINIBOIL N CHILL Two systems in one Energy Efficient. Environmentally friendly - CFC free. New advanced design technology maintains temperature of both boiling and chilled water. Internal filter and pressure limiting valve. Simple filter changes. Wall mounted. SpeciFica TIONS ElecTrical ApproV al No. Q01754 Model MBC15/30 Litres 2.5 Rating (KW) 1.8 Recovery Cups/Min 2 Boiling Water Delivery Cups 15 Chilled Water Delivery Cups 30 Dimensions (mm) H W D 590 495 295 MBC30/60 5 1.8 2 30 60 690 600 330 MBC60/100 10 1.8 2 60 100 690 600 330 Single Phase - 240v 50HZ - requires 10 Amp GPO Flex and plugs supplied Optional - cyst guard filtration (extra) Computerised element with boil dry protection Full Australian Service Network Full 12 months parts and labour warranty Electrically Approved Chilled Water Temperature (adjustable) Power on Indicator Specifications are subject to change without notice. WiffenProducts 05 boilingbilly
THE ORIGINAL UNDERSINK WATER CHILLER CompleTe inst alla Tion kit Carafe Tap Twin filter System. 3 Pin Power cable. Plastic Tubing and Brass Fittings. Compressor hermetically sealed auto overload Refrigeration R-143a gas charge Thermostat (factory set) Capacity 1/6hp (MC1014) (1/12hp MC07) Stainless Steel 2.5 litre Tank (MC1014) (Copper 1 litre Tank MC07) Powder Coated case Maximum Pressure 800kpa / minimum pressure 100kpa Model 301 SpeciFica TIONS MODEL NO. HEIGHT MM DEPTH MM WIDTH MM WEIGHT KG VOLTS Model 303/F MC07 280 400 205 13 240 50HZ MC1014 250 500 180 17 240 50HZ Optional Extra: Stainless Steel Case 12 months warranty on all parts Specifications are subject to change without notice. boilingbilly WiffenProducts 06
It s finally here! A boiling water unit that is effecient and 99% recycable. Not only does it work on water pressure alone, it doesn t need power zapping water pumps, solenoid valves or electronic taps. Simple Design It Eliminates costly parts, and has easy maintenance. No Electronic Waste The unit has no toxic components that is hazardous to people, as well as the environment. Saves Power All units fitted with a 24 hour timer to stop power wastage when not in use. Come grab yourself the most green unit on the market, get the original Boiling Billy by going into your nearest plumbing outlet or Boiling Billy Distributor. GTBC Model WiffenProducts 07 boilingbilly
Product Features GREEN T Boil n Chill Unit THE ULTIMATE UNDER SINK BOIL AND CHILL UNIT Solid Brass Australian Made Tap Twin Filter System 350 kpa PLV Wool Insulation 24/7 Day Timer GT Model Easy and inexpensive to repair Splash free water delivery All taps comply with AS1428.1 and 1428.2 (Disability Access) Ceramic disc lever action tap handle No expensive pumps, solenoid valves or drainage required. Only requires water pressure to operate Optional - Remote controlled boiling water safety cut off system Font-In bench and Child safety lock Models Available Model No. Boiling Rating Chilled No. Cups (KW) Cups per hr GTBC 10/40 10 1.8 40 GTBC 20/40 20 2.4 40 GTBC 20/80 20 2.4 80 GTBC 40/40 40 2.4 40 Model No. Boiling Rating Cups No. Cups (KW) per hr recovery GT 1.25 10 1.8 90 GT 2.5 20 2.4 110 GT 5 40 2.4 110 GT 5 (4.8) 40 4.8 220 GTBC 40/80 40 2.4 80 10 Amp, 15 Amp and 20 Amp units available boilingbilly WiffenProducts 08
ULTIMIX BOIL N CHILL UNIT The ul T ima T e un D er sink boil an D chill unit. Twin filter system supplied. All fittings are supplied for installation of boiling & chilled modules. ie. twin filter system for all area and combined dual check valve with 350 kpa P.L.V. 10 amp power supply is for standard installation. Connect to cold water supply only 280-2000 kpa. The water supply must be potable. Boiling water module to be connected under bench, only the tap dispenser to be visible. Solid brass tap. Ceramic disc lever action tap handle. Electronic control unit is an integral part of the element, which maintains a temperature within one degree celsius of set point - boil dry protection and micro temp protect circuitry. No expensive pumps, solenoid valves or drainage required. Venturi system only requires water pressure to operate Boiling Billy vents through outlet spout. Example if boiling and ambient filtered water is required, specify BBM (check specifications sheet) OPTIONAL Remote controlled boiling water safety cut off system Under bench font WiffenProducts 09 boilingbilly
COMBINED BOILING & CHILLED FILTERED MODELS Combined boiling and chilled filtered models Model Boiling Rating Chilled No. No. Cups (KW) Cups per hr BBCM10/40 10 1.8 40 BBCM20/40 20 2.4 40 BBCM20/80 20 2.4 80 BBCM40/40 40 2.4 40 BBCM40/80 40 2.4 80 *optional 3, 3.6, 4.8 & 6 Kw Combined boiling and ambient filtered models Boiling Number Cup/Hr Rating Height Width Depth Module of cups recovery kw mm mm mm BBM10 10 90 1.8 335 180 150 BBM20 20 110 2.4 325 245 290 BBM40 40 110 2.4 480 245 290 Combined chilled and ambient filtered models Chilled Cups per Litres per Height Width Depth Module hour hour mm mm mm BCM6 40 7 195 280 395 BCM10 80 10-14 250 180 500 Boiling Water= 200ml Chilled water cups = 160ml Specifications are subject to change without notice. boilingbilly WiffenProducts 10
THE ORIGINAL UNDERSINK BOILING BILLY The new genera T ion in boiling wa T er T echnology. IDeal For Tea, coffee! The unit is located under the sink. The copper body comprises a storage tank and an expansion chamber. Element controls temperature and boil dry protection. Solid brass, rapid action, 1/4 turn lever tap handle or spring loaded tap handle. Solid brass swivel bi-flo spout. AS 3500 spill tray not required up to seven litres. No expensive pumps, solenoid valves or drainage required. A 350 kpa pressure limiting valve must be fitted for maximum efficiency in all areas. RECOMMENDED: A twin filter system to be fitted to all units OPTIONAL: Remote controlled boiling water safety cut off system T YPICAL INS T ALLA T ION: Electrical Approval No: Q0S1101 SpeciFica TIONS One Cup (200ml cups) BOILING BILLY UNDERSINK SERIES Model Capacity No. Of Cup/Hr Rating Height Width No. Litres Cups Recovery Kw mm mm TD 1.25 1.25 10-13 90 1.8 335 180 TD 2.5 2.5 15-20 110 2.4 325 245 TD 5 5 30-40 110 2.4 480 245 Depth mm 150 290 290 Optional 4.8 & 6kw Specifications are subject to change without notice. WiffenProducts 11 boilingbilly
DUALMATE Now you can ha Ve boiling wa Ter and hot wa Ter From The one unit All main valves supplied. Simple installation. Supplied with 2 metre 10 amp cord and plug with insulated earth pins. Ideal for office and work staff kitchens. Saves power and space. Replaces the need to specify separate boiling water and hot water unit, one unique cylinder does both. Dual Mates are compact and sit in under the sink and supplies boiling water for tea and coffee via a brass chrome plated tap and hot water to the usual basin set mixed all from one unit. Tap Base Size SpeciFica TIONS Boiling W a Ter cups - 200ml 220ml-Cups Hot Water Boiling Water Height Width Depth DM Boiling Water (Ltrs) Recovery Cups HR mm mm mm KW 40/12 40 12 110 480 245 290 2.4 Optional: 4.8kw & 6kw Specifications are subject to change without notice. boilingbilly WiffenProducts 12
Australian agents QLD Mark Anderson Sales Building 4/84 Ingleston Rd Wakerley, QLD 4154 Ph: 07 3890 8011 Fax: 07 3890 8022 Email: mark@masales.com.au Web: www.markandersonsales.com.au NSW Halgan Services U2/187 South Creek Rd Cromer NSW 2099 Ph: 02 9972 1355 Fax: 02 9972 1455 Email: halgan@ozemail.com.au VIC/SA Interchange Sales and Marketing U29/87-91 Heatherdale Rd Ringwood, Vic 3134 Ph: 03 9873 7511 Fax: 03 9873 7522 Email: interchange@netspace.net.au WA Complete Enviro Solutions 18 Aberfoyle Place Hamersley, WA 6022 Ph: 08 9342 7181 Fax: 08 9342 6378 Email: info@completeenvirosolutions.com.au Web : www.completeenvirosolutions.com.au TAS GJ T rade Supplies 8 Fergusson drive Quoiba TAS 7310 Ph: 03 6424 7008 Fax: 03 6424 7009 Email: gjtradesupplies@bigpond.com WiffenProducts 13 boilingbilly
WARRANTY 7 YEAR WARRANTY Should any part of the boiling water unit fail within:- 1. Year of installation, that part will be replaced or repaired by the manufacturer or its authorised service agent free of charge as per warranty conditions 1 to 6 and warranty exclusions 1 to 4. Wiffen Products Pty. Ltd. hereby warrants that in addition to the protection given to Australian consumers under the Trade Practices Act, any other similar Act or Law, we will if necessary replace or repair on the terms and conditions set out hereunder any boiling water unit manufactured by this company. WARRANTY CONDITIONS 1. The boiling water unit must be installed to comply with all relevant statutory and local requirements for the area where the boiling water unit is installed. 2. The boiling water unit must be installed in accordance with manufacturers installation instructions supplied with the unit. 3. When a boiling water unit is repaired or replaced under this warranty, the component or boiling water unit replaced does not have the benefit of a new warranty and only the balance of the original warranty period will remain effective. 4. Only the boiling water unit and genuine company replacement parts are covered by this warranty. Electrical or plumbing parts supplied by the installer are not covered by this warranty. 5. The cost of insurance, travelling and transport between the installed site and the nearest manufacturers authorised agents premises will be to the account of the customer where unit is installed outside the boundaries of the metropolitan area as defined by the manufacturer or beyond 25km from a manufacturers or an authorised agent in a regional town or centre. 6. Where a filter is specified by the manufacturer or supplied as original equipment with the boiling water unit, the filter that is specified or supplied must be fitted on the cold water supply to the boiling water unit, and maintained by the owner in a serviceable and working condition, while ever the boiling water unit is in service. Failure to fit and maintain the filter will render this warranty void. Guarantee period - Twelve (12) months from the date of sale by Wiffen Products Pty. Ltd or Twentyfour (24) months from date of manufacture by Wiffen Products Pty. Ltd., whichever period shall first expire. WARRANTY EXCLUSIONS The warranty may become void by the following exclusions and service charge for labour and parts (if necessary) could become a cost to the owner. 1. Failure due to misuse and/or incorrect installation; Acts of God; Water conditions; Accidental Damage; Unauthorised attempts at repair of the boiling water unit. 2. Where there is a failure of the electricity or water supply; where water leaks are caused by the plumbing and not the boiling water unit or its components; where there is no flow of hot water due to faulty plumbing or a filter blockage; where the complaint is related to low or high water pressure or excessive water pressure; where it is found that here is nothing wrong with the boiling water unit. 3. Repairs to a boiling water unit due to scale formation or where the boiling water unit has been fitted t o a hard or harmful water supply or the recommended or supplied filter has not been fitted and maintained. 4. Where the boiling water unit has been installed in a position that does not comply with the manufacturers installation instructions or relevant statutory requirements or subject to any statutory provisions to the contrary claims for damage to walls, furniture, carpets, foundations or the need for major dismantling or removal of cupboards, doors or walls or any other consequential loss either directly or indirectly due to leakage from a boiling water unit. Chiller units have a twelve month warranty on parts and labour from date of sale. Chiller units have the same warranty exclusions as boiling water units. boilingbilly WiffenProducts 14