Report No. ECL01I Page 1 of 5. Test Report. Centre Testing International Pinbiao(Shanghai) Co., Ltd. Maritime Industry Division

Similar documents
MARINE GYRO COMPASS STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:

Turn-Key Environmental Consultants, Inc. 790 Barnhart Rd. 714 Monument Ave. Phone: Troy, OH Dayton, OH Fax:

RADAR REFLECTOR STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:

ST. VINCENT AND THE GRENADINES

Shipboard incinerators with capacities up to 4000 kw

Vermiculite Containing Materials

DNVGL-CP-0398 Edition December 2015

PROCEDURES FOR APPROVAL OF LIFE-SAVING APPLIANCES AND FIRE SAFETY SYSTEMS, EQUIPMENT AND PRODUCTS

GROUNDING AVOIDANCE SYSTEM (GAS)

C-01 FIRE DECKS AND BULKHEADS

Why is Asbestos a Problem? Linda Apthorpe

IMO LIST OF DOCUMENTS ISSUED IN CONNECTION WITH THE FORTY-SEVENTH SESSION OF THE SUB-COMMITTEE ON FIRE PROTECTION AGENDA FOR THE FORTY-SEVENTH SESSION

BS EN ISO 1716: Determination Of The Heat Of Combustion For Building Products

Asbestos Awareness at the University of Toronto

RESOLUTION MSC.101(73) (adopted on 5 December 2000) ADOPTION OF AMENDMENTS TO THE INTERNATIONAL CODE FOR APPLICATION OF FIRE TEST PROCEDURES

WÄRTS1LÄ. EC-Declaration of Conformitv. In accordance with the Marine Equipment Directive 2014/90/EU

SOUND RECEPTION SYSTEM

For compliance with Resolution MEPC.174(58), the Certificate is issued on behalf of the Norwegian Maritime Authority.

IMO MSC 94 Summary Report on Polar Code

MGN 453 (M) Maritime and Coastguard Agency Logo MARINE GUIDANCE NOTE

For the compliance with the resolution MEPC.174(58), the Certificate is issued on behalf of the Norwegian Maritime Authority.

For compliance with Resolution MEPC.174(58), the Certificate is issued on behalf of the Norwegian Maritime Authority.

BS EN ISO : 2010

GASTEC QA. Evaluation Guideline KE 192. Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment

Notice on the implementation of the amendments to the FSS Code in resolution MSC.339(91)

Glass fibre rovings - Non-metallic materials

IECEx Certificate of Conformity

BRL-K21030/02 5 August Certification of Alarm Communication. Certification Alarm Transmission Systems (ATS) Alarm Transmission Systems

RESOLUTION MSC.145(77) (adopted on 5 June 2003) PERFORMANCE STANDARDS FOR WATER LEVEL DETECTORS ON BULK CARRIERS

IMO WORK PROGRAMME. Central control stations and safety centres on passenger ships. Submitted by Argentina and ICCL

BS EN : 2001 & IEC :2000

Low Location Lighting

SIMPLIFIED VOYAGE DATA RECORDER (S-VDR)

DRY CHEMICAL POWDER SYSTEM REQUIREMENTS TO COMPLY WITH THE LATEST IMO IGC CODE AND EUROPEAN COUNCIL CLARIFICATIONS

Your Key to achieving C.E Marking Compliance

IMO Resolution MSC 61 (67) 1996; Annex 1, Part 2. Smoke & Toxicity Test. WF Report Number: Date: 13 th August Test Sponsor:

Approval of water mist systems in buildings

IMO Resolution MSC 61(67): Annex 1: Part 2

IMO. Resolution A.952(23) Adopted on 5 December 2003 (Agenda item 17) GRAPHICAL SYMBOLS FOR SHIPBOARD FIRE CONTROL PLANS

CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE

Coatings for protection of FRP structures with heavy rain erosion loads

Indicators for Rudder Angle, Rate of Turn, Propeller Shaft Revolution and Propeller Pitch

GASTEC QA. Evaluation Guideline KE 191. Amendment A1 Excess flow valves. KE A1 March 2012

RESOLUTION MSC.188(79) (adopted on 3 December 2004) PERFORMANCE STANDARDS FOR WATER LEVEL DETECTORS ON BULK CARRIERS AND SINGLE HOLD CARGO SHIPS

IMO CCC1 Summary Report on the developments of the IGF Code

On Electromagnetic Compatibility

BS EN ISO : 2010

Circuit Breakers JANUARY The electronic pdf version of this document found through is the officially binding version

Government of Bermuda Department of Maritime Administration BERMUDA SHIPPING NOTICE

DNVGL-CP-0407 Edition February 2016

EC Type Examination Certificate

BS EN ISO : Fire Tests For Determination Of The Burning Behaviour of Floorings. WF Report Number. Date: 16 th November 2009.

FIRE TESTING SERVICES FIRE TESTING SER

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Fire Hose Reel & Cabinets. Company Profile. 26 Techno Fire & Safety Co. LLC

Classification of reaction to fire performance in accordance with EN : A1: 2009 on Superfoil SFNC. Prepared for:

Guideline No.: C-02(201510) C-02 FIRE DOORS. Issued date: October 20,2015. China Classification Society

Global Requirements for the Fire Protection of Ships. Dr Janet Murrell Warrington Certification Ltd

Notified Body No.: 0098

BS EN ISO : 2010

ISO INTERNATIONAL STANDARD. Ships and marine technology Lowlocation lighting on passenger ships Arrangement

C e r t i f i c a t e

Requirements for ships carrying hydrogen and compressed natural gas vehicles

EC TYPE EXAMINATION CERTIFICATE

Australian Standard. Water mist fire protection systems System design, installation and commissioning AS

ISO INTERNATIONAL STANDARD

GUIDE TO APPROVAL OF RETROFIT BALLAST WATER MANAGEMENT SYSTEM INSTALLATIONS

Zurich s experience case studies

IMO. Resolution A.951(23) Adopted on 5 December 2003 (Agenda item 17) IMPROVED GUIDELINES FOR MARINE PORTABLE FIRE EXTINGUISHERS

For compliance with Resolution MEPC.174(58), the Certificate is issued on behalf of the Norwegian Maritime Authority.

IMO UNIFIED INTERPRETATIONS TO SOLAS CHAPTER II-2 AND RELATED FIRE TEST PROCEDURES

CERTIFICATE OF FIRE APPROVAL

Procedure. Procedure

LATCH UP TEST REPORT

Technical Information

RECORD OF GARBAGE DISCHARGES PART II. For all cargo residues as defined in regulation 1.2 (Definitions) (Ships that carry solid bulk cargoes)

Explain in writing if the address of the building is different than the address on this form:

International Water Mist Conference, Istanbul October 22-23, 2014 The background and development of the guidelines in IMO Resolution A.

EC TYPE EXAMINATION (MODULE B) CERTIFICATE

USCG-EU MRA EC TYPE EXAMINATION (MODULE B) CERTIFICATE

Fire, Safety & Damage Control Systems for Naval Applications

IECEx Certificate of Conformity

EC TYPE EXAMINATION (MODULE B) CERTIFICATE (EC-US MRA)

NF X : Parts 1, 2, 3, 4 & 5

Review Fire Test Report

PQS performance specification

Tilux - Wet-area fibrous asbestos cement sheet. Product type. Cement - sheets, moulded product. Sub-Product type Trading name(s) Tilux

MARINE FLOORING POLYFLOR INTERNATIONAL. Germany objectflor Art und Design Belags GmbH Tel: +49 (0)

Test Report No: ICL/H17/7967

Resolving the Vermiculite Asbestos Conflict

Photoluminescent maritime safety signs

Part 6 Additional class notations Chapter 6 Additional fire protection for passenger vessels

GASTEC QA. Approval Requirements 200. for the GASTEC QA product certificate for fusion fittings and saddles made from Polyethylene (PE)

ClassNK Technical Information No. TEC-0838 (iii) The dormant period, visual indication, first stage audible alarm, second stage remote audible alarm a

UNIFIED INTERPRETATION OF PROVISIONS OF IMO SAFETY, SECURITY, AND ENVIRONMENT-RELATED CONVENTIONS

900 S. Colorado Blvd. - 5,609 square ft building (new automobile sales showroom and offices) built in 2000/2001; and

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Notified Body No.: 0575 G U A D N L. SJq

ISO INTERNATIONAL STANDARD. Ships and marine technology Fire-extinguishing systems for protection of galley cooking equipment

Transcription:

Report No. ECL01I013900001 Page 1 of 5 Test Report Applicant Address Sample(s) received date Mar. 18, 2016 HEIBEI HENGDA SEALING MATERIALS CO.,LTD SHUCHENG INDUSTRIAL AREA, HEJIAN CITY, HEBEI PROVINCE,CHINA Test period Mar. 18, 2016 to Mar. 28, 2016 * Asbestos analysis carried out by Centre Testing International Pinbiao(Shanghai) Co., Ltd. has been recognized by the following organizations: UKAS(United Kingdom Accreditation Service) CNAS(China National Accreditation Service for Conformity Assessment) CCS(China Classification Society) DNV GL(DNV GL Classification Society) LR(Lloyd's Register) Centre Testing International Pinbiao(Shanghai) Co., Ltd. Maritime Industry Division 1996, Xinjinqiao Road, Pudong New District, Shanghai, China Tel: 021-31073317; 021-31073319 Email: marine@cti-cert.com Website: www.cti-ship.com Complain Hotline: 0755-33681700

Report No. ECL01I013900001 Page 2 of 5 Information about Sample(s)(Sample(s) and its/their information are provided by the applicant) Sample Name WNY250 NON-ASBESTOS RUBBER SHEET FOR OIL RESISTING Sample Received Date Mar. 18, 2016 Testing Period Mar. 18, 2016 to Mar. 28, 2016 Test Requested Based on the requirements of resolution MSC.282(86) (SOLAS Regulation II-1/3-5.2s revised), which was adopted by IMO, and the Hong Kong International Convention for the Safe and Environmentally Sound Recycling of Ships, 2009 (the Hong Kong Convention), also the 2015 Guidelines for the Development of the Inventory of Hazardous Materials (MEPC.269(68)) by Marine Environment Protection Committee, and according to the customer s request, to determine if there is Asbestos in the submitted sample. Test Method(s) Please refer to the following pages. Test Result(s) Please refer to the following pages. Tested by Reviewed by Approved by Date Mar. 28, 2016 Su Hongwei Senior Laboratory Manager No. N161353082

Report No. ECL01I013900001 Page 3 of 5 Test Method(s) Pretreatment Tested Item method Ashing treatment/acid Asbestos treatment/ suspension sedimentation method Standard(s) Equipment Test Type MDL 1 ISO 22262-1:2012/ XRD/ Qualitative And / NIOSH 9000:1994 PLM Semi quantitative Test Result(s) 2 Tested Item Asbestos 2 Material/CAS No. Chrysotile/ 12001-29-5 Crocidolite/ 12001-28-4 Amosite (Grunerite)/ 12172-73-5 Tremolite/ 77536-68-6 Actinolite/ 77536-66-4 Anthophyllite/ 77536-67-5 Test Results N.A.D. N.A.D. N.A.D. N.A.D. N.A.D. N.A.D. Tested Sample/Part Description Green solid Note: -N.A.D.= No Asbestos Detected Statement of Compliance -1:The limit of detection of this method is defined as the detection and identification of one fibre or fibre bundle in the amount of sample examined. With appropriate matrix reduction procedures that are tailored to the nature of the sample, the limit of detection can be significantly lower than 0.1%. -2:The estimated concentration(s) of the asbestos varieties detected in ranges is/are as follows: Trace (<0.1%), 0.1%~5%, 5%~50%, and 50%~100%. -Even after disintegration it can be very difficult, or impossible, to detect the presence of asbestos in some asbestos-containing bulk materials using polarized light microscopy. These materials often contain milled asbestos with too small fibre diameter and length to be detected. -CTI Asbestos Testing Center has established strict quality assurance and supervision procedures in accordance with international standard. And the laboratory participates in the AIMS* every year (four times per year) to confirm our proficiency. *The Asbestos in Materials Scheme (AIMS) is an international inter-laboratory testing scheme, and it is managed by the Health and Safety Laboratory (HSL) which on behalf of the Health and Safety Executive (HSE) of UK

Report No. ECL01I013900001 Page 4 of 5 Spectrum XRD Spectrum Spectrum PLM Spectrum (100X)

Report No. ECL01I013900001 Page 5 of 5 Photo of the sample(s) *** End of report *** The test report is effective only with both signature and specialized stamp. The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CTI, this report can t be reproduced except in full.