reach for the top hand dryers 2014-2015 SHDXL series eln series lan series SHDLPBH76 series SHDL series
An ecological choice to make life easier Stelpro hand dryers are developed with three qualities in mind effectiveness, personalization and ecological awareness. From conception to fabrication, our ultimate goal is to offer versatile hand dryers that respond to all your needs, no matter the conditions of use. Schools, factories, busy public places, locker rooms, restaurants, health and sports centres, are all places where a Stelpro hand dryer will make life easier for visitors and management alike. Made in Canada and designed to meet the highest standards of quality in the industry, Stelpro s line of hand dryers offers you a broad selection, as well as easy installation, along with a multitude of innovative and ecological features, outstanding design and significant savings for your customers. 3
no more paper Paper production comes with a high cost (manpower, raw materials, manufacturing plants, transport) on top of the damage it does to the environment. Also, once wet, paper hand towels can no longer be recycled. Replacing paper hand towels with an electric hand dryer allows for: Savings on maintenance costs Cleaner washrooms no more piles of wet paper in the garbage can or strewn on the floor Significant reduction in bacteria which thrive on wet paper Reduced vandalism, for example, toilets blocked by paper hand towels economical & ecological
The high velocity hand dryer and recycled paper towels CLIMATE CHANGE SCORE (KgCO2eq) 6000 5000 4000 3000 2000 1000 0 PAPER TOWELS CARBON FOOTPRINT RECYCLED PAPER TOWELS CONVENTIONAL HAND DRYER XLERATOR HAND DRYER MATERIALS PRODUCTION MANUFACTURING TRANSPORTATION USE END OF LIFE The graph shown here compares the environmental impact of a high velocity hand dryer like the XLERATOR, a conventional hand dryer, paper towels, and recycled paper towels. The results show that, compared to paper towels, a high velocity hand dryer like the XLERATOR results in an average reduction in carbon footprint of 50% to 70%. This study was reviewed and approved by a Life Cycle Analysis (LCA) Expert Committee in order to ensure compliance with a study conducted in accordance with ISO standard 14040. The LCA method evaluates numerous carbon footprints at each step of a product s life cycle, as well as manufacturing material, energy required, and pollutants produced during production and transport. The analysis evaluates the carbon footprint over 10 years of product use, which corresponds to the drying of 260,000 pairs of hands. ENERGY USED PER HAND DRY KILOJOULES PER USE 800 700 600 500 The graph shown here depicts the amount of energy in kilojoules required to dry hands using paper towels, recycled paper towels, a conventional hand dryer, and a high velocity hand dryer like the El-NiÑo or the XLERATOR. The analysis examines the energy required to produce the paper towels and operate the hand dryer, as well as energy consumption with use. The results are convincing, showing that high velocity hand dryers result in an 80% reduction in energy consumption. This reduction in energy consumption invariably translates to cost savings of up to 90% in certain cases. 400 300 200 100 0 PAPER TOWELS RECYCLED PAPER TOWELS CONVENTIONAL HAND DRYER HIGH VELOCITY HAND DRYER the resources needed in the production of paper raw materials production transport to factory manufacturing and packaging transport to end users usage Transport post-usage Garbage dump, incinerator or recycling plant 5
xlerator hand dryer shdxl series The standard in high velocity The first high velocity hand dryer on the market, the XLERATOR sets the standard for quality and performance in its category. The Xlerator dries hands in seconds, making it the ultimate choice in washrooms with high traffic, such as stadiums, arenas and public places. Its reinforced, die-cast zinc alloy shell make it virtually unbreakable. The first choice for LEED buildings, the Xlerator is the ideal high velocity hand dryer! Dries hands in only 15 seconds! Starts and stops automatically PERFECT FOR LEED buildings YEAR* WARRANTY
features colors white, white polymer BMC, chrome, graphite or brushed stainless steel finish epoxy-polyester powdercoat manufacturing rib reinforced shell, solidly constructed of die-cast zinc alloy lightweight, unbreakable and rustproof secured to its supporting wall bracket with two chrome-plated, tamper-proof bolts sound level 71 dba (81 dba with hands) element nichrome element producing instant heat control infrared optical sensor located next to the air outlet activates hand dryer 35-second lockout feature is activated if hands are not removed before this time installation wall mounted Stelpro reserves the right to modify descriptions, manufacturing specifications or prices without prior notice. For all the latest models and updated prices, please refer to our web site at www.stelpro.com. * 3 years on electronic components. 7
white graphite white polymer BMC your logo chrome brushed stainless steel choice of 5 colors Create a memorable impact by personalizing your hand dryer. Choose your color and have your company logo printed right on the dryer. For more details, contact your Stelpro representative. personalization technical drawings 11 7/16" 291 mm 8 1/4" 210 mm 12 5/16" 313 mm 8 3/4" 222 mm 6 11/16" 170 mm 5 1/2" 139 mm 8 top front side back
technical specifications product power (WattS) voltage amperage weight price code element motor total volts amp. kg lb W CH, GR or SS BW SHDXLAS1 1000 500 1500 120 12.5 7.3 16 761.25 872.25 673.25 SHDXLAS8 1000 500 1500 208 7.0 7.3 16 761.25 872.25 673.25 SHDXLAS2 1000 500 1500 240 6.5 7.3 16 761.25 872.25 673.25 Add W for white, BW for white polymer BMC, CH for chrome, SS for brushed stainless steel or GR for graphite recommended installation heights - Distance between floor and bottom of hand dryer men women teenagers children handicapped 45 (115 cm) 43 (110 cm) 41 (105 cm) 35 (90 cm) 37 (95 cm) accessories recess kit The recess kit is comprised of a stainless steel, satin finish wall box and mounting plate. When installed with the recess kit, the XLERATOR takes up less than 4 in. of wall depth, meeting ADA Protrusion Requirements (Americans with Disabilities Act). 26" 660 mm 14 3/8" 365 mm 3 7/8" 98 mm 24 1/8" 613 mm 10" 254 mm 16 3/8" 416 mm 1/4" 6 mm 3 3/8" 86 mm HEPA Filtration System Stelpro offers the only certified HEPA filtration system, proven to remove 99.97% of bacteria and particles from the air. HEPA filter kit 2 3/4" 70 mm 9 5/8" 245 mm 5 11/16" 144 mm Wall Guard The wall guard protects the wall under the hand dryer from drops of water due to wet hands being blown dry, keeping bacteria from forming on the wall. hepa replacement filter 2 3/16" 56 mm 8 5/8" 219 mm 4 1/8" 105 mm white pre-filter 13/16" 21 mm 7 3/4" 197 mm 3 1/4" 83 mm black stainless steel product description price SHDXL-40525 hepa filter kit 269.00 SHDXL-40520 hepa replacement filter 144.00 SHDXL-94 Replacement pre-filter with stainless steel mesh screen 45.00 SHDXL-40502 Stainless steel recess kit 287.00 SHDXL-89W Wall guard - white (15 3/4 in. x 31 3/4 in. x 1/16 in.) 225.00 (for 2) SHDXL-89B Wall guard - black (15 3/4 in. x 31 3/4 in. x 1/16 in.) 225.00 (for 2) SHDXL-89S Wall guard - stainless steel (15 3/4 in. x 31 3/4 in. x 1/16 in.) 359.00 (for 2) Stelpro reserves the right to modify descriptions, manufacturing specifications or prices without prior notice. For all the latest models and updated prices, please refer to our web site at www.stelpro.com. 9
El-Niño hand dryer eln series The perfect combination of power and style The El-Niño is absolutely incredible; you have to feel it to believe it. This powerful hand dryer dries hands completely in mere seconds. The EL-Niño is a quiet, energy efficient solution that combines quick drying with overall savings. In fact, this state-of-the-art hand dryer offers four personalized operating modes to respond to your different needs. Save time and money with the stylish El-Niño! Four personalized operating modes: a first in the industry heavy duty die-cast aluminum alloy shell energy and cost efficient stylish and compact semi-recessed installation 4 inches or less to meet ADA standards (Americans with Disabilities Act) YEAR* 10 WARRANTY
features Colors white or chrome Finish epoxy-polyester powdercoat or chrome-plated manufacturing rib reinforced shell, solidly constructed of die-cast aluminum alloy lightweight, heavy duty and rustproof shell secured to wall bracket with two chrome-plated tamper-proof bolts element nichrome element located in motor section Control four personalized operating modes to meet your needs infrared optical sensor located next to the air outlet activates and deactivates the hand dryer 60-second lockout feature is activated if hands are not removed before this time Installation surface mounted optional semi-recessed installation with depth of 4 inches or less; meets ADA standards (Americans with Disabilities Act) Stelpro reserves the right to modify descriptions, manufacturing specifications or prices without prior notice. For all the latest models and updated prices, please refer to our web site at www.stelpro.com. * 3 years on electronic components. 11
operating Modes The El-Niño s built-in electronic control provides you with the option to personalize your unit to meet all your needs. ultimate Normal/High mode High air speed and full heating power for quick drying Perfect for: stadiums, arenas, theatres, public places, and warehouses COMFORT Normal/Low mode Reduced air speed and moderate heating power for comfortable noise level and heat range Perfect for: libraries, small restaurants and coffee shops ECONOmical Eco/High mode High air speed without heat for quick drying with energy and cost savings Perfect for: schools, universities, amusement parks, warehouses and large restaurants HARMONY Eco/Low mode Reduced air speed without heat for energy savings and a moderate noise level Perfect for: hospitals, libraries, daycares, small restaurants and coffee shops legend air speed mode Heating power Noise level (DB) Noise level Air speed (LFM) Energy savings total power drying time without hands with hands at air outlet at hand level* watts seconds Ultimate -Normal/High 77 90 19000 16000 1450 10 COMFORT - Normal/Low 72 85 11400 9600 1175 15 ECONOmical - Eco/High 77 90 19000 16000 550 15 HARMONY - Eco/Low 72 85 11400 9600 465 20 * 4 inches below
technical drawings O 3/16" 5 mm 7" 178 mm 3/16" 5 mm 7" 6 3/16" 6 3/16" 178 mm 157 157 mm mm 3/16" 5 mm 2 1/14" 58 mm 10 3 13/16" 1/2" 6 3/16" 266 97 mm 157 mm 2 1/14" 58 mm 3 13/16" 97 mm O 7/8" 22 mm O 7/8" 22 mm 7 3/8" 187 mm 7 3/8" 8 1/16" 187 mm 205 mm 12 1/4" 12 1/4" 311 311 mm mm 8 1/16" 205 mm 12 1/4" 311 mm O 3/16" 5 mm O 3/16" 5 mm back side 15" 381 mm front recessed 10 1/2" 266 mm 10 1/2" 266 mm PLANCHER floor or OU counter COMPTOIR technical specifications product power (WattS)* voltage amperage color weight price code element motor total volts amp. kg lb ELNV0901AW 900 550 1450 120 12 white 4.4 9.8 565.50 ELNV0901ACH 900 550 15" 15" 1450 120 12 chrome 4.4 9.8 615.00 381 mm ELNV0902AW 900 381 mm 550 1450 240 6.0 white 4.4 9.8 565.50 ELNV0902ACH 900 PLANCHER OU COMPTOIR 550 1450 PLANCHER OU COMPTOIR 240 6.0 chrome 4.4 9.8 615.00 ELNV0908AW 900 400 1300 208 6.5 white 4.4 9.8 565.50 ELNV0908ACH 900 400 1300 208 6.5 chrome 4.4 9.8 615.00 * Data obtained in Normal/High mode recommended installation heights - Distance between floor and bottom of hand dryer men women teenagers children handicapped 45 (115 cm) 43 (110 cm) 41 (105 cm) 35 (90 cm) 37 (95 cm) accessories wall guard The wall guard protects the wall under the hand dryer from drops of water due to wet hands being blown dry, keeping bacteria from forming on the wall. 15 3/4" 400 mm 1/16" 4.75 mm product description price SHDXL-89W SHDXL-89B SHDXL-89S Wall guard - white (15 3/4 in. x 31 3/4 in. x 1/16 in.) Wall guard - black (15 3/4 in. x 31 3/4 in. x 1/16 in.) Wall guard - stainles steel (15 3/4 in. x 31 3/4 in. x 1/16 in.) 225.00 (for 2) 225.00 (for 2) 359.00 (for 2) 31 3/4" 806 mm Stelpro reserves the right to modify descriptions, manufacturing specifications or prices without prior notice. For all the latest models and updated prices, please refer to our web site at www.stelpro.com. 13
LA-NiñA hand dryer LAN series Versatility within reach Count on LA-NiñA and you won t be disappointed. One model, three voltages: its versatility will amaze you! This multi-voltage hand dryer can be used in many different environments due to its four personalized operating modes. The LA-NiñA hand dryer takes up very little wall space; only 4 inches deep! LA-NiñA is a winner! MULTI-PURPOSE AND MULTI-voLtage One model for all uses Four personalized operating modes controlled by a circuit board to better meet all your needs very quiet in harmony mode Energy efficient in Economical and harmony modes rapid installation and service Stylish and compact depth of 4 inches or less; meets ADA standards (Americans with Disabilities Act) operating modes The LA-NiñA s built-in electronic control provides you with the option to personalize your unit to meet all your needs. The unit is controlled by an internal circuit board. The LA-NiñA and El-Niño hand dryers have the same circuit board. For a more detailed description of the four modes, refer to page 12. mode Noise level Air speed total power drying time DB PCM Watts seconds ultimate 69 108 1350 30 comfort 63 78 910 35 economical 69 108 135 40 harmony 63 78 65 45
technical drawings 8 1/4" 210 mm 6 1/4" 160 mm 4 1/2" 114 mm O 1/4" 6 mm TYP. 4'' 100.9 mm 10'' 254.2 mm 8 3/8" 213 mm 11 7/16'' 290.4 mm 8 9/16" 217 mm MIN 15'' 381 mm front back side floor or counter technical specifications product power voltage amperage color weight price code watts* volts amp. kg lb LANV1200AW 1350 120/208/240 11 white 2.5 5.5 381.00 * Data obtained in Ultimate mode. This hand dryer is multi-voltage for 120V/208V/240V and will automatically adjust power to optimize performance. recommended installation heights Distance between floor and bottom of hand dryer men women teenagers children handicapped 45 (115 cm) 43 (110 cm) 41 (105 cm) 35 (90 cm) 37 (95 cm) YEAR 3 levels of detection Adjust the sensitivity level of your hand dryer to meet usage requirements. Detection distances may vary depending on lighting conditions. maximal detection standard (approx. 4 in.) medium detection decreased (approx. 3 in.) minimal detection minimum (approx. 2 in.) WARRANTY YEAR WARRANTY features Color white manufacturing Lexan rib reinforced shell; lightweight and resistant secured to wall bracket with two stainless steel tamper-proof bolts Wattage and voltage multi-voltage see technical specifications table element nichrome element located in the motor section Control four personalized operating modes to meet your needs infrared optical sensor located next to the air outlet YEAR activates and deactivates the hand dryer 60-second lockout feature is activated if hands are not removed before this time Installation surface mounted: depth of 4 inches or less; meets ADA standards (Americans with Disabilities Act) WARRANTY Stelpro reserves the right to modify descriptions, manufacturing specifications or prices without prior notice. For all the latest models and updated prices, please refer to our web site at www.stelpro.com. 15
hair dryer SHDLPBH76 series Power from every angle The SHDLPBH76 series hair dryers, designed to be surface mounted onto the wall, are constructed from a one-piece ultra-resistant shell. They are equipped with a push button and a 360 directional air nozzle, making it just as easy to dry your hands as it is to dry your hair. 360 Directional air nozzle! push button controlled startup YEAR* WARRANTY
technical drawings 10 7/32'' 259.6 mm top 10 1/8'' 257.2 mm ø 5/16'' 7 13/32'' 188.1 mm 6 1/16'' 154.0 mm 8 1/4'' 209.6 mm front side back technical specifications product power voltage amperage weight price code* watts volts amp. kg lb white chrome SHDLPBH761 2000 120 20 8.1 18 586.00 703.00 SHDLPBH768 2000 208 10 8.1 18 586.00 703.00 SHDLPBH762 2000 240 10 8.1 18 586.00 703.00 Add W for white or CH for chrome * For US orders: please add the letter A in front of the product code SHDLPBH76 models ashdlpbh76 models recommended installation heights men women teenagers children handicapped Distance between floor and bottom of hair dryer 64 (163 cm) 58 (147 cm) 56 (142 cm) 43 (109 cm) 45 (114 cm) Distance between floor and bottom of hand dryer 40 (102 cm) 38 (97 cm) 36 (91 cm) 30 (76 cm) 32 (81 cm) features Colors white or chrome finish epoxy-polyester powdercoat or chrome finish manufacturing one-piece ultra-resistant shell with rounded sides, reinforced with zinc alloy lightweight, heavy duty and rustproof with a zinc alloy push button in a chrome finish zinc alloy 360 directional air nozzle in a chrome finish element nichrome element Control push button controls the startup, lasting 90 seconds, controlled by a sealed electronic timer Installation wall mounted Stelpro reserves the right to modify descriptions, manufacturing specifications or prices without prior notice. For all the latest models and updated prices, please refer to our web site at www.stelpro.com. * 3 years on electronic components. 17
hand dryer SHDL series same model, two versions shdl models ashdl models The SHDL series hand dryer is constructed with a onepiece, ultra-resistant Lexan cover and is surface-mounted onto the wall. It is available either fully automatic or with a push button. Starts and stops automatically (SHDLAS model) Push button starts and stops manually (SHDLPB model) YEAR* WARRANTY ANS* GARANTIE features color white manufacturing shell is a one-piece mold of Lexan 940 secured to a zinc alloy wall bracket with two chrome-plated, tamper-proof bolts chrome-plated, die-cast zinc turbine forces air tamper-proof vent, preventing the insertion of foreign objects sound level 72 dba element YEAR* nichrome control shdlas model - an infrared optical sensor located next to the air outlet activates the hand dryer a 90-second lockout feature is activated if hands are not removed before this time SHDLPB model - push button start built-in YEAR 30-second sealed AN electronic timer WARRANTY installation wall mounted WARRANTY ANS* GARANTIE 6 5/8" 168 mm GARANTIE technical specifications product power voltage amperage weight code* watts volts amp. kg lb price SHDLAS1W 2000 120 20 9.0 20 439.00 6 5/8" 168 mm technical 11 291 7/16" drawings mm 6 5/8" 168 mm 6 5/8" 168 mm 7 13/16" 198 mm 9 3/4" 248 mm 9 2 SHDLAS8W 2000 208 11 9.0 20 439.00 SHDLAS2W 2000 240 10 9.0 20 439.00 SHDLPB1W 2000 120 20 8.1 18 383.50 top side SHDLPB8W 2000 208 11 8.1 18 383.50 SHDLPB2W 2000 240 10 8.1 11 7/16" 291 mm 18 383.50 * For US orders: please add the letter A in front of the product code 7 13/16" 11 7/16" 198 291 mm mm 7 13/16" 198 9 1/2" 241 mm mm 9 1/ 241 recommended installation heights Distance between floor and bottom of hand dryer men women teenagers children handicapped 43 (109 cm) 41 (104 cm) 39 (99 cm) 33 (84 cm) 35 (89 cm) 9 3/4" 248 mm 9 3/4" 7 1/2" 248 mm190 mm 18 Stelpro reserves the right to modify descriptions, manufacturing specifications or prices without prior notice. For all the latest models and updated prices, please refer to our web site at www.stelpro.com. * 3 years on electronic components. front back
heating service innovation ventilation hand dryers research and development performance bathroom fans heating cables quality design Furnaces Thermostats 360 CoMfort Stelpro offers a unique portfolio of the most innovative products, designed and manufactured in Canada to meet the highest of standards. From heating and ventilation to electronic controls, Stelpro is your global comfort solution to enhance your clients living environment. Peak performance is complemented by optimal efficiency and striking designs, uniting all aspects of comfort. 19
quebec 450-441-0145 450-441-9145 canada / usa 450-441-2629 450-441-9050 1-800-363-3414 1-800-363-1022 stelpro.com 1041 Parent Saint-Bruno-de-Montarville ( Qc ) Canada J3V 6L7 Cat2014_HD_EN_USA