Residential & Commercial Water Booster Systems Frequency Controlled Water Booster Systems
Experience With our R&D, production, and installation experience of more than 35 years in the pump technologies field, we protect you and your investments without compromising from quality with our expert sales and after-sales services. Environmentally-Friendly Engineering By blending advanced pump specifications with innovative technologies, we offer highquality, high-performance, energy-efficient, environmentally-friendly, and low-cost products to the end users. We offer complete solutions for building infrastructures with our wide product range including in-line dry rotor circulating pumps, end-suction norm pumps, horizontal-vertical multi-stage centrifuge pumps, waste water drainage pumps, booster systems for residential and commercial buildings, fire pumps, and booster systems in line with TSE EN 12845 and NFPA 20 norms under the brand of ETNA. ETNA, which set off with the vision of offering sustainable products, is preferred in prestigious projects in both Turkey and the world, and is used reliably.
ETNA Water Booster Systems Frequency Controlled Water Booster Systems Conventional fixed-speed water booster systems run the pump at full force even with minimum water consumption and perform very frequent starts & stops. They cause up to 2 bars fluctuation of the water pressure and reduce the lifetime of the pump. Water booster systems with frequency control drivers control the engine speed, thus adjust the pump performance in a very wide range according to system requirements and ensure optimum operation. As a result, an energy saving up to 40% and low noise level, long life water booster systems with a low operating cost, which provide maximum comfort during consumption and which can be controlled with pressure transmitter and run as redundant and uninterruptedly with equal aging attribute, are obtained. Exact Answer to Your Needs With varieties addressing residences, commercial buildings, and industrial applications, ETNA water booster systems are delivered as a complete set (pressure switches, manometers, valves, floaters etc.) with electric-driven pumps, inlet-outlet collector groups, protection-control board, and all accessories on the chassis. Balance tank and flex connection are optional. With the T-KI & T-KIF series with complete stainless steel pump, fixed speed, and frequency control, the KO & PFK KO series with Noryl fan, fixed cycle, and frequency control, and the TKH & TKHF series with cast fan for high flow and pressure requirements, you will always find an ETNA solution that answers to your needs. www.etna.com.tr
T-KI and T-KIF SERIES FULLY STAINLESS STEEL WATER BOOSTER SYSTEMS Maximize comfort and energy efficiency with fully stainless steel TKI & T-KIF series water booster systems. Fields of Use Where high pressure water supply is required; Building blocks etc. high-rise building applications. Ultra filtration, reverse osmosis etc. pressured water requiring treatment systems. Washing, cleaning processes, fire fighting etc. industrial systems. T-KIF Series Design Properties Pump Body Fan and Diffusers Inlet - Outlet Body Shaft Mechanical Seal : Carbon - Ceramic Silicon Carbide Fluid temperature : 0-68 C Cold Water, 0-120 C Hot Water Applications T-KI Series General Properties These are package water boosters manufactured from vertical shaft and multi-layer pumps. Frequency control is provided with a driver on the board in the T-KIF series models. P-C difference pressure constant mode frequency control Maximum Flow : 4 X 36 m³/h Maximum Pressure: 160 mss Optional : AISI316 pump body 8-10-16-25 bars operating pressure according to the model Standard generation up to 3 pumps Special production in project-based work if required 4
KO & PFK KO SERIES WATER BOOSTER SYSTEMS KO & PFK KO series water booster systems with a norly fan offer a high quality and a reasonable price as standard. Fields of Use Where high pressure water supply is required; Building blocks etc. high-rise building applications. Washing, cleaning processes, fire fighting etc. industrial applications. PFK Series Design Properties Pump Body Fan and Diffusers Inlet - Outlet Body Shaft Mechanical Seal Fluid temperature : Noryl : Cast Iron / Bronze (Optional) : AISI316 Stainless steel : Carbon / Ceramic / NBR : 0-68 C Cold Water Applications FM KO Series General Properties These are package water boosters manufactured from vertical shaft and multi-layer pumps. Frequency control is provided with a driver on the board in the PFK KO series models. P-C difference pressure constant mode frequency control Maximum Flow : 4 X 60 m³/h Maximum Pressure: 250 mss Optional : AISI316 pump body 8-10-16-25 bars operating pressure according to the model Standard production up to 4 pumps Special production in project-based works if required KO Series 5 www.etna.com.tr
T-KH & T-KHF SERIES WATER BOOSTER SYSTEMS Obtain optimum performance in the applications that require high flow and pressure with T-KH & T-KHF series cast fan water booster series. Fields of Use Where high pressure water supply is required; Farming applications that require high pressure water supply. Building blocks etc. high-rise building applications. Washing, cleaning processes, fire fighting etc. industrial applications. Design Properties Pump Body : GG20 Cast Fan and Diffusers : GG20 Cast Inlet - Outlet Body : GG20 Cast Shaft : AISI316 - Stainless Steel Mechanical Seal : Carbon / Ceramic / NBR Fluid temperature : -10-0 C Cold Water, 0-110 C Hot Water Applications Wall-mounted Frequency Control Board General Properties These are package water boosters manufactured from vertical shaft and multi-layer pumps. Frequency control is provided with a driver on the board in the T-KHF series models. P-C difference pressure constant mode frequency control Maximum Flow : 4 X 140 m³/h Maximum Pressure: 160 mss Special roller bearing with cylindrical roller for compliance with high temperature and heavy load conditions Optional : GG40 pump body and fan use 8-10-16 bars operating pressure according to the model Standard production for up to 4 pumps 6
SOME OF OUR REFERENCES Our water booster systems, preferred for many prestigious projects, offer users comfort and trust in their residences, investments, and social lives. Ankara Forest General Directorate Campus İstanbul ISKI General Directorate Building İstanbul Sabiha Gökçen Airport Heaş Building Bursa Sabahattin Gazioğlu Pediatric Hematology and Oncology Hospital Çanakkale Troy Museum Antalya Maya World Hotel Side Eskişehir Water Sports Center Ankara Ankara Metropolitan Municipality Esertepe Recreation Area İstanbul Dumankaya Adres 7 www.etna.com.tr
After-Sales Services We are by your side with our more than 35 years of sector experience, 88 service points all around Turkey, and customer-oriented after-sales approach to service (commissioning, maintenance and repair, spare part supply). Dudullu Organize Sanayi Bölgesi Nato Yolu Caddesi No: 267/B 34775 Ümraniye Istanbul / Turkey Tel. +90 (216) 561 47 74 (Pbx) Fax. +90 (216) 561 47 50 www.etna.com.tr info@etna.com.tr