Hustler Z Bac Vac Parts Manual 967, 988 Hustler Turf Equipment P.O. Box 7000 Hesston, Kansas 6706-097
t- 56 06/08
Table of Contents Chapter General Information.................................... - Chapter Hopper Front Assembly................................. - Door Assembly........................................ - Hopper Assembly 59................................ -6 Chapter Blower Assembly 550................................ - Transition Chute Assembly 550........................ - Spindle Housing Assembly 5067........................ -6 Chapter Blower Installation, 7" Deck............................. - Blower Installation, 60" Deck............................. - Blower Installation, 5" Deck............................. -6 Blower Installation, 7" XR7 Deck......................... -8 Blower Installation, 66" XR7 Deck......................... -0 Blower Installation, 60" XR7 Deck......................... - Blower Installation, 5" XR7 Deck......................... - Bac-Vac Installation Without ROPS....................... -6 Bac-Vac Installation With ROPS......................... -8 Weight Installation...................................... -0 Index........................................................ i- 56 06/08
56 06/08
Chapter General Information This Manual covers 577K Hustler Z Bac Vac for 5" Deck, 585K Hustler Z Bac Vac for 60" Deck, 5758K Hustler Z Bac Vac for 7" Deck, 967 Hustler Z Bac Vac Assembly, 988 Hustler Z XR7 Bac Vac Assembly, 59 Hustler Z 5 Deck Adapter Kit, 50 Hustler Z 60" Deck Adapter Kit, and 508 Hustler Z 7" Deck Adapter Kit, 070 5" XR7 Adapter Kit, 078 60" XR7 Adapter Kit, 076 66" XR7 Adapter Kit, and 07 7" XR7 Adapter Kit. Service Literature PART DESCRIPTION 58 Hustler Z Bac Vac Owner s Manual 07086 XR7 Bac Vac Owner s Manual 56 Parts Manual Note: When ordering parts, you must use the part number as shown for each part, not the index number. Always give the model and serial number to your parts and service representative. Note: Items sold in bulk such as seals and hoses are sold by the foot. Using this manual Illustrations used were current at the time of printing, but subsequent production changes may cause your machine to vary slightly in detail. Excel Industries, Inc. reserves the right to redesign and change the machine as deemed necessary, without notification. If a change has been made to your machine which is not reflected in this parts manual, see your Hustler dealer for current information and parts. 56 06/08 -
Hardware Description Codes & Abbreviations The following codes are used throughout this parts manual. Refer to this list when ordering parts. ABBREVIATION CB CE CP CS CW FDRW FW HX LW MB MS NT SC SH SB SS OD ID DESCRIPTION Carriage Bolt Clevis Pin Cotter Pin Cap Screw Cup Washer Fender Washer Flat Washer Hex Head Lock Washer Machine Bushing Machine Screw Nut Self Tapping Cap Screw Socket Head Shoulder Bolt Set Screw Outside Diameter Inside Diameter Standard Torques The following chart lists the standard torque values for the threaded fasteners found in this manual. Torque all cap screws, nuts and set screws to these values unless a different torque is shown in the Notes section next to the fastener SIZE FT-LBS NM SIZE FT-LBS NM.50 8.. M.. 7 M..75 0 0 M5.5 6..8 8 65 M6 7.7 0..500 7 99 M8 8.5 5.56 05 M0 7 50.65 5 00 M 6 87.750 60 50 M6 60 5.875 0 565 M0 0 5.00 65 850 M 555 750 Lubricate all grease zerks. NOTE: - 56 06/08
Chapter Contents Hopper Front Assembly................................... - Door Assembly......................................... - Hopper Assembly 59................................. -6 56 06/08 -
Hopper Front Assembly 5 6 0 5 7 9 6 7 7 8 7 7 8 9 6 8 8 8 0 A 8 5 6 6 5 7 8 9 7 8 7 7 8 8 7 0 8 8 VIEW A 7 8 8-56 06/08
Hopper Front Assembly INDEX SERVICE PART MFG. PART QTY. DESCRIPTION 0087 0087 SIDE MOUNTING SCREEN ANGLE 008 008 HOPPER SCREEN 00897 00897 HOPPER SCREEN STRAP 0086 0086 REAR MOUNTING SCREEN ANGLE 5 058776 058776 NT.-8 HX NL ZN 6 797 797 FW. X.00 X. HRD ZN 7 700 700 6 FDW.00 X.8 X.06 ZN 8 069 069 7 CS.5-0 X.65 HX G5 ZN 9 75778 75778 FIBERGLASS HOPPER 0 09 09 SPOUT DEFLECTOR 00858 00858 CS.50-0X.500 HX G5 ZN 06855 06855 NT.50-0 HX NL ZN 07079 07079 6 FW.50X.560X.0 SAE ZN 706 706 CS.50-0 X.00 HX G5 ZN 5 0088 0088 HINGE 6 7756 7756 SEAL. X.75 9" LONG 7 997 997 LH CORNER SUPPORT 999 999 RH CORNER SUPPORT 8 056077 056077 6 CS.50-0 X.00 HX G5 ZN 9 758789 758789 6 NT.-8 CAMTAINER FASTNER 0 05599 05599 CS.50-0 X.75 HX G5 ZN 996 996 SPOUT 0770 0770 WINDOW TRIM 7605 7605 OVERFLOW WINDOW 065 065 CS.-8 X.00 HX G5 ZN 5 066 066 6 CS.-8 X.00 HX G5 ZN 6 0700 0700 6 LW. MED SPRING ZN 7 087 087 0 CP.5D X.50 LG HML ZN 8 59 59 PIVOT BEARING DISC 9 96588 96588 DOOR LINKAGE 0 9959 9959 DOOR STRAP LINKAGE 9655 9655 LH PIVOT LINKAGE 9657 9657 RH PIVOT LINKAGE 077 077 6 CE.500 X.5.56 X.09 ZN 9656 9656 RH DOOR LATCH LINKAGE 96570 96570 LH DOOR LATCH LINKAGE 7765 7765 HANDLE 5 75885 75885 UV.75 ID X 5" LG BLACK GRIP 6 965 965 BAC VAC FRAME 7 7586 7586 RP.50 X.75 HEAVY SPIRAL 8 78 78 CLOSE OUT PLATE NOTES:. Glue with 75065 Scotch Grip Plastic Adhesive.. Adjust both corner supports to the upper corners and tighten top bolts on hinge first then side bolts. 56 06/08 -
Door Assembly 5 6 0 7 7 0 6 6 5 8 5 9 6 5 8-56 06/08
Door Assembly INDEX SERVICE PART MFG. PART QTY. DESCRIPTION 96 96 REAR DOOR COVER 00 00 HANDLE 05599 05599 0 CS.50-0 X.750 H X G5 ZN 07079 07079 8 FW.50 X.560 X.0 SAE ZN 5 069 069 CS.50-0 X.65 HX G5 ZN 6 700 700 9 FDW.000 X.8 X.06 ZN 7 056077 056077 CS.50-0 X.000 HX G5 ZN 8 990 990 LH DOOR 999 999 RH DOOR 9 7600 7600 0 RIVET.87 X.75 X.75 HD DIA 0 06855 06855 NT.50-0 HX NL ZN 9900 9900 DOOR CHANNEL 006 006 LH WHEEL BRACKET 008 008 RH WHEEL BRACKET 076 076 FW.06 X.000 X.06 ZN 086660 086660 NT.75-6 HX LK NY 5 7608 7608.5X.75 /8 BORE GRAY WHEEL 6 00855 00855 BOTTOM PLATE 7 00889 00889 DOOR SCREEN STRAP 8 008 008 DOOR SCREEN. Wheel to turn freely. NOTES: 56 06/08-5
Hopper Assembly 59 HOPPER DOOR ASSEMBLY HOPPER FRONT ASSEMBLY 6 5-6 56 06/08
Hopper Assembly 59 INDEX SERVICE PART MFG. PART QTY. DESCRIPTION 069 069 CS.50-0 X.65 HX G5 ZN 07079 07079 FW.50 X.560 X.0 SAE ZN 59 59 PIVOT BEARING DISC 087 087 CP.5D X.50 LG HML ZN 5 76 76 MADE IN U.S.A.-COMBO DECAL 6 7585 7585 BAC VAC ID DECAL NOTES:. Door to be flush with top surface of hopper assembly. Adjust door until sides align evenly with hopper. If needed, continue to adjust door until door assembly rests against the hopper in the closed position. Finish installing linkage.. Rotate handle several times to ensure proper opening and closing of door assembly, adjust as required.. Adjust 78 (Close Out Plate) to close gap between front assembly and door assembly see Chapter, Hopper Front Assembly on page - 56 06/08-7
-8 56 06/08
Chapter Contents Blower Assembly 550................................. - Transition Chute Assembly 550.......................... - Spindle Housing Assembly 5067.......................... -6 56 06/08 -
Blower Assembly 550 5 0 5 7 6 6 9 8 6 7 8 0 9 6 0 5 6 0 5 7 9 0 7 8 9 5 6-56 06/08
Blower Assembly 550 INDEX SERVICE PART MFG PART QTY. DESCRIPTION 07878 07878 CS.50-0 X.50 HX G5 ZN 0706 0706 LW.50 MEDIUM SPRING ZN 07886 07886 FW.50 X.750 X.80 ZN 067 067 DRIVE PULLEY 5 7 7 BLOWER TOP 6 077 077 BEARING W/O COLLAR 7 058 058 CAST SPINDLE HOUSING 8 758565 758565 IMPELLER 9 75870 75870 JACK SHAFT 0 7 7 KEY 05765 05765 5 FW.00 X.50 X. ZN 7059 7059 CS.50- X.750 HX G5 ZN 07 07 6 NT.-8 HX G5 ZN 7685 7685 6 FW. X.687 X.05/.080 HD ZN 5 9 9 BLOWER HOUSING 6 075 075 CS.50- X.50 HX G5 ZN 7 657 657 BEARING DISK 8 UPPER IDLER ARM 9 068759 068759 6 CW.560 X.0 X.050 PN 0 07 07 NT.50- UNT LK G5 ZN 70578 70578 CS.75-6 X.750 HX G5 ZN 76795 76795 7 FW.06 X.8 X.060 SAE HRD ZN 077 077 FLAT IDLER PULLEY 068 068 SPRING / COIL PL. 5 598 598 DECK LIFT SPRING CHAIN 6 5067 696 SPINDLE HOUSING ASSEMBLY 7 0657 0657 CS.50- X.00 HX G5 ZN 8 07 07 PULLEY 9 9 9 LOWER IDLER ARM 0 7057 7057 CS.75-6 X.750 G5 ZN 50 50 IDLER SPACER 0550 0550 NT.75-6 HX G5 ZN 0799 0799 6 MS.5-0 X.750 TH CR ZN 5 5 BLOWER INLET 5 76855 76855 6 FW.8 X.65 X.05/.080 HD ZN 6 097 097 6 NT.5-0 HX G5 ZN NOTES:. Torque bottom bolt to 65 ft. lbs. first then torque top bolt to 65 ft. lbs.. Tighten to snug up assembly and still allow idler to rotate. Apply Loctite.. Assemble bearings in spindle housing with extended race to the inside. 56 06/08 -
Transition Chute Assembly 550 BLOWER ASSEMBLY 5 6 7 9 8 0-56 06/08
Transition Chute Assembly 550 INDEX SERVICE PART MFG PART QTY. DESCRIPTION 069 069 CS.5-0 X.65 HX G5 ZN 76855 76855 0 FW.8 X.67 X.05/.080 HD ZN 77080 77080 PULLEY COVER 7700 7700 UPPER BLOWER BELT 5 097 097 6 NT.5-0 HX G5 ZN 6 0708 0708 6 LW.5 MEDIUM SPRING ZN 7 7575 7575 TRANSITION CHUTE 8 0799 0799 6 MS.5-0 X.750 TH CR ZN 9 7670 7670 DANGER BLOWER DECAL 0 775 775 BELT & PULLEY DECAL 778 778 WHIRLING BLADES DECAL NOTES:. Decal to be readable from blower outlet (hose) side. 56 06/08-5
Spindle Housing Assembly 5067-6 56 06/08
Spindle Housing Assembly 5067 ITEM SERVICE PART MFG. PART QTY DESCRIPTION 077 N/A BEARING W/O COLLAR 08 N/A CAST SPINDLE HOUSING 008805 N/A SPINDLE SHAFT 0005 N/A GREASE FITTING NOTES:. Install upper bearing with extended inner race up and lower bearing with extended inner race down. 56 06/08-7
-8 56 06/08
Chapter Contents Blower Installation, 7" Deck............................... - Blower Installation, 60" Deck............................... - Blower Installation, 5" Deck............................... -6 Blower Installation, 7" XR7 Deck........................... -8 Blower Installation, 66" XR7 Deck.......................... -0 Blower Installation, 60" XR7 Deck.......................... - Blower Installation, 5" XR7 Deck.......................... - Bac-Vac Installation Without ROPS....................... -6 Bac-Vac Installation With ROPS.......................... -8 Weight Installation...................................... -0 56 06/08 -
Blower Installation, 7" Deck BLOWER ASSEMBLY 5 6 7 8 9 7" DECK 0-56 06/08
Blower Installation, 7" Deck INDEX SERVICE PART MFG. PART QTY. DESCRIPTION 770 770 LOWER BLOWER BELT 06 06 CS.75-6 X.00 HX G5 ZNYC 656 656 PULLEY COVER 00 00 CB.75-6 X.750 STD ZN 5 0 0 BLOWER PIVOT MOUNT 6 07878 07878 CS.500-0 X.500 HX G5 ZNYC 7 77088 77088 PULLEY 8 006 006 HP.8 X.690 ZN 9 85 85 BLOWER MOUNT 0 097 097 CE.80 X.75.50 X.60 ZN 76795 76795 6 FW.06 X.8 X.060 SAE HD ZN 0550 0550 NT.75-6 HX GRD 5 ZN 500 500 LOWER BLOWER IDLER COVER 0089 0089 7" DISCHARGE ADAPTER NOTES:. Torque to 65-75 ft. lbs.. All components are contained in 508 Deck Adapter Kit for Hustler Z Bac Vac.. Used on mowers with serial numbers after 050098. 56 06/08 -
Blower Installation, 60" Deck BLOWER ASSEMBLY 5 7 8 6 9 0 60" DECK - 56 06/08
Blower Installation, 60" Deck INDEX SERVICE PART MFG. PART QTY. DESCRIPTION 77096 77096 LOWER BLOWER BELT 768 768 PULLEY COVER 00 00 CB.75-6 X.750 STD ZN 0 0 BLOWER PIVOT MOUNT 5 06 06 CS.75-6 X.00 HX G5 ZNYC 6 007 007 60" DISCHARGE ADAPTER 7 07878 07878 CS.500-0 X.500 HX G5 ZN 7 075 075 CS.500- X.500 HX G5 ZNYC 8 5785 5785 PULLEY 9 006 006 HP.8 X.690 ZN 0 85 85 BLOWER MOUNT 097 097 CE.80 X.75.50 X.60 ZN 76795 76795 FW.06 X.8 X.060 SAE HD ZN 0550 0550 NT.75-6 HX GRD 5 ZN NOTES:. Torque to 65-75 ft. lbs.. All components are contained in 50 Deck Adapter Kit for Hustler Z Bac Vac.. Use on deck with saddless spindle assemblies.. Used on mowers with serial numbers after 050098. 56 06/08-5
Blower Installation, 5" Deck BLOWER ASSEMBLY 6 5 7 8 9 0 5" DECK -6 56 06/08
Blower Installation, 5" Deck INDEX SERVICE PART MFG. PART QTY. DESCRIPTION 78565 78565 LOWER BLOWER BELT 567 567 PULLEY COVER 00 00 CB.75-6 X.750 STD ZN 50 50 BLOWER PIVOT BRACKET 5 0595 0595 CB.75-6 X.00 STD CD 6 56 56 5" DISCHARGE ADAPTER 7 075 075 CS.500- X.500 HX G5 ZNYC 8 5785 5785 PULLEY 9 006 006 HP.8 X.690 ZN 0 568 568 BLOWER MOUNT 097 097 CE.80 X.75.50 X.60 ZN 76795 76795 FW.06 X.8 X.060 SAE HD ZN 0550 0550 NT.75-6 HX GRD 5 ZN NOTES;. Torque to 65-75 ft. lbs.. All components are contained in 59 Deck Adapter Kit for Hustler Z Bac Vac.. Used on mowers with serial numbers after 050098. 56 06/08-7
Blower Installation, 7" XR7 Deck BLOWER ASSEMBLY 5 6 7 9 8 5 0 7" DECK -8 56 06/08
Blower Installation, 7" XR7 Deck INDEX SERVICE PART MFG. PART QTY. DESCRIPTION 0890 0890 PULLEY COVER 787986 787986 LOWER BLOWER BELT 086660 086660 NT.75-6 HXZY NL 76795 76795 FW.06 X.8 X.060 SAE 5 09 09 BLOWER PIVOT MOUNT 6 075 075 CS.500- X.50 HX G5 7 006 006 HP.8 X.690 ZN 8 097 097 CE.80 X.75.50 X.60 ZN 9 77088 77088 PULLEY 0 006 006 CHUTE MOUNT 0595 0595 CB.75-6 X.00 STD CD 0890 0890 BLOWER COVER 7685 7685 FW.X.687X.05/.080H 066 066 CS.-8X.000 HX G5 5 058776 058776 NT.-8 HXZY NL NOTES:. Torque to 65-75 ft. lbs.. All components are contained in 07 Deck Adapter Kit for Hustler Z XR7 7" Bac Vac. 56 06/08-9
Blower Installation, 66" XR7 Deck BLOWER ASSEMBLY 5 6 7 5 9 8 0 66" DECK -0 56 06/08
Blower Installation, 66" XR7 Deck INDEX SERVICE PART MFG. PART QTY. DESCRIPTION 08900 08900 PULLEY COVER 66" XR7 DECK 787978 787978 LOWER BLOWER BELT 086660 086660 NT.75-6 HXZY NL 76795 76795 FW.06 X.8 X.060 SAE 5 09 09 BLOWER PIVOT MOUNT 6 075 075 CS.500- X.50 HX G5 7 006 006 HP.8 X.690 ZN 8 097 097 CE.80 X.75.50 X.60 ZN 9 5785 799 PULLEY 0 006 006 CHUTE MOUNT 0595 0595 CB.75-6 X.00 STD CD 0900 0900 BLOWER GUARD 7685 7685 FW.X.687X.05/.080H 066 066 CS.-8X.000 HX G5 5 058776 058776 NT.-8 HXZY NL NOTES:. Torque to 65-75 ft. lbs.. All components are contained in 076 Deck Adapter Kit for Hustler Z XR7 66" Bac Vac. 56 06/08 -
Blower Installation, 60" XR7 Deck BLOWER ASSEMBLY 7 5 6 7 8 5 0 6 9 60" DECK - 56 06/08
Blower Installation, 60" XR7 Deck INDEX SERVICE PART MFG. PART QTY. DESCRIPTION 08898 08898 PULLEY COVER 787978 787978 LOWER BLOWER BELT 086660 086660 NT.75-6 HXZY NL 76795 76795 FW.06 X.8 X.060 SAE 5 09 09 BLOWER PIVOT MOUNT 6 0705 0705 60" XR7 BLOWER SPACER 7 075 075 CS.500- X.50 HX G5 8 006 006 HP.8 X.690 ZN 9 097 097 CE.80 X.75.50 X.60 ZN 0 5785 799 PULLEY 006 006 CHUTE MOUNT 0595 0595 CB.75-6 X.00 STD CD 709 709 CB.75-6X.50 STD G5 0909 0909 BLOWER GUARD 5 7685 7685 FW.X.687X.05/.080H 6 066 066 CS.-8X.000 HX G5 7 058776 058776 NT.-8 HXZY NL NOTES:. Torque to 65-75 ft. lbs.. All components are contained in 078 Deck Adapter Kit for Hustler Z XR7 60" Bac Vac. 56 06/08 -
Blower Installation, 5" XR7 Deck BLOWER ASSEMBLY 6 5 7 5 6 8 0 9 5" DECK - 56 06/08
Blower Installation, 5" XR7 Deck INDEX SERVICE PART MFG. PART QTY. DESCRIPTION 08896 08896 PULLEY COVER BLOWER 77096 77096 LOWER BLOWER BELT 086660 086660 NT.75-6 HXZY NL 76795 76795 FW.06 X.8 X.060 SAE 5 0778 0778 BLOWER PIVOT MOUNT 6 075 075 CS.500- X.50 HX G5 7 006 006 HP.8 X.690 ZN 8 097 097 CE.80 X.75.50 X.60 ZN 9 600650 600650 PULLEY 0 006 006 CHUTE MOUNT 0595 0595 CB.75-6 X.00 STD CD 709 709 CB.75-6 X.50 STD G5 0908 0908 BLOWER GUARD 7685 7685 FW.X.687X.05/.080H 5 066 066 CS.-8X.000 HX G5 6 058776 058776 NT.-8 HXZY NL NOTES:. Torque to 65-75 ft. lbs.. All components are contained in 070 Deck Adapter Kit for Hustler Z XR7 5" Bac Vac. 56 06/08-5
Bac-Vac Installation Without ROPS BAC VAC ASSEMBLY HUSTLER Z TRACTOR 5 6 0 8 7 9 8-6 56 06/08
Bac-Vac Installation Without ROPS INDEX SERVICE PART MFG. PART QTY. DESCRIPTION 76006 76006 FLEXIBLE TRANSFER TUBE 600775 600775 XR7 BAC VAC FLEXIBLE TRANSFER TUBE 0608 0608 HOSE CLAMP 7795 7795 MMZ BAC VAC MOUNT BRACKET 006 006 HP.8 X.690 ZN 5 7800 7800 FW.656 X. X.090 ZN 6 06560 06560 CE.65 X.00.56 X.8 ZN 7 70595 70595 CS.500- X.5 HX G5 ZNYC 8 76796 76796 FW.5 X.06 X.090 SAE HD ZN 9 0089 0089 NT.500- HX G5 ZNYC 0 76999 76999 SC #0 X.750 PHILLIPS TYAB ZN 78760 78760 TAIL PIPE EXTENSION (HONDA/KAWASAKI) 78899 78899 TAIL PIPE EXTENSION (7 KOHLER) NOTES:. Second clamp is installed on Flexible Transfer Tube at Blower Outlet. 56 06/08-7
Bac-Vac Installation With ROPS BAC VAC ASSEMBLY 5 6 HUSTLER Z TRACTOR HUSTLER Z ROPS 7 8-8 56 06/08
Bac-Vac Installation With ROPS INDEX SERVICE PART MFG. PART QTY. DESCRIPTION 76006 76006 FLEXIBLE TRANSFER TUBE 600775 600775 XR7 BAC VAC FLEXIBLE TRANSFER TUBE 0608 0608 HOSE CLAMP 7795 7795 MMZ BAC VAC MOUNT BRACKET 006 006 HP.8 X.690 ZN 5 7800 7800 FW.656 X. X.090 ZN 6 06560 06560 CE.65 X.00.56 X.8 ZN 7 76999 76999 SC #0 X.750 PHILLIPS TYAB ZN 8 78760 78760 TAIL PIPE EXTENSION (HONDA/KAWASAKI) 78899 78899 TAIL PIPE EXTENSION (7 KOHLER) NOTES:. Second clamp is installed on Flexible Transfer Tube at Blower Outlet. 56 06/08-9
Weight Installation TRACTOR FRAME -0 56 06/08
Weight Installation INDEX SERVICE PART MFG. PART QTY. DESCRIPTION 5 5 BAC VAC WEIGHT 708 708 WG NT.75-6 ZN 789 789 FW.06 X.5 X. HRD ZN 78599 78599.00 SQ BOTTOM /8-6 U-BOLT NOTES: 56 06/08 -
- 56 06/08
Numerical Index Part No. Page No. Index Numerics 0089-7 00858-008805 -7 00 -, -5, -7 087 -, -7 0005-7 0657-0700 - 0708-5 0706-07079 097 -, -5, -7 -, -5, -7, -9, -, -, -5 058-0608 -7, -9 077-006 -, -5, -7, -9, -, -, -5, -7, -9 07-097 -, -5 0595-7, -9, -, -, -5 077-07 - 08-7 066 -, -9, -, -, -5 06 -, -5 068-05765 - 0550 -, -, -5, -7 05599 -, -5 056077 -, -5 058776 -, -9, -, -, -5 06560-7, -9 069 -, -5, -7, -5 065-06855 -, -5 068759-075 -, -5, -7, -9, -, -, -5 076-5 077 -, -7 07878 -, -, -5 07886-0799 -, -5 086660-5, -9, -, -, -5 007-5 Part No. Page No. 0089-09 -9, -, - 006-9, -, -, -5 0705-07086 - 070 -, -5 078 -, - 076 -, - 07 -, -9 0778-5 08896-5 08898-08900 - 0890-9 0890-9 0908-5 0909-0900 - 7-598 - 657-008 -5 008-0088 - 00855-5 0086-0087 - 00889-5 00897-008 -5 006-5 00-5 09-067 - 07-0770 - 85 -, -5 9-0 -, -5 9-7 - 5 - - 50-508 -, - 500-768 -5 7765-56 -7 50-7 577K - 585K - Part No. Page No. 59 -, -7 50 -, -5 59-6, -7 5-568 -7 58-56 - 567-7 5758K - 656-7795 -7, -9 78-78760 -7, -9 696-59 -, -7 96-5 965-9657 - 9655-9656 - 96570-96588 - 999-5 990-5 999-997 - 9900-5 996-9959 - 5067-5785 -5, -7, -, - 600650-5 600775-7, -9 706-700 -, -5 70578-7059 - 7057-70595 -7 709 -, -5 799 -, - 789-797 - 708-778 -5 775-5 7800-7, -9 7756-76 -7 75065-7575 -5 75778-56 06/08 i-
Part No. Page No. Part No. Page No. Part No. Page No. 7585-7 758565-7586 - 75870-758789 - 75885-7600 -5 7608-5 76006-7, -9 7605-7670 -5 76795 -, -, -5, -7, -9, -, -, -5 76796-7 76855 7685 -, -5 -, -9, -, -, -5 76999-7, -9 77080-5 77088 -, -9 77096-5, -5 7700-5 770-78565 -7 78599-787978 -, - 787986-9 78899-7, -9 967-988 - i- 56 06/08