SANS 19 (2007) (2018-03-02) The inspection, testing and examination of mobile cranes Covers provisions for the inspection, testing and examination of mobile cranes in use. Does not cover the inspection, testing and examination of new mobile cranes..01 A4 41p EN Replaced by: SANS 19 (2018) PDF 41p EN 53.020.20 SANS 58 (SABS 58) (2010) (2018-03-16) Coiled wire for automatic baling machines Requirements for materials, strength and finish of wire, the winding and strapping of coils and the strength of strapping ties are laid down. Ed 2.02 A4 9p EN PDF 9p EN 55.040; 77.140.25; 77.140.65 Am 1(National), 2008-03-28 Am 2(National), 2010-10-08 SANS 156 (SABS 156) (2007) (2018-03-19) Moulded-case circuit-breakers Covers single-pole and multi-pole air-break circuit-breakers, assembled as an integral unit in a supporting and enclosing moulded case of insulating materials, for current ratings up to and including 1 000 A and for alternating voltages up to and including 660 V and direct voltages up to and including 500 V. Ed 3.03 A4 42p EN PDF 42p EN 29.120.50 Am 1(National), 1987-03-01 Am 2(National), 2000-06-09 Am 3(National), 2007-09-28 Replaced by: SANS 556-1 (2018) SANS 164-2-2 (2014) (2018-03-27) Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 2-2: Fully dedicated system, 16 A 250 V a.c. Covers the rating and dimensions of the SANS 164-2 16 A 250 V a.c. plug and socket-outlet system for household and similar purposes, fully dedicated system, for use in South Africa. A4 19p EN PDF 19p EN Replaced by: SANS 164-2-2 (2018) 29.120.30 SANS 164-3 (2017) (2018-03-27) Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 3: Conventional system, 6 A 250 V a.c. Covers the rating and dimensions of the conventional 6 A 250 V a.c. plug and socket-outlet system and socket-outlet adaptors for household and similar purposes, for use in South Africa..03 A4 18p EN PDF 18p EN Replaced by: SANS 164-3 (2018) 29.120.30 SANS 164-4 (2017) (2018-03-27) Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 4: Dedicated system, 16 A 250 V a.c. Covers the rating and dimensions of the 16 A dedicated plug and socket-outlet system for the connection of equipment to a dedicated supply system, having a nominal voltage of 250 V a.c in household and similar applications in South Africa..03 A4 24p EN PDF 24p EN Replaced by: SANS 164-4 (2018) 29.120.30 SANS 273 (2007) (2018-03-02) The design, manufacture, maintenance and safe operation of chairlifts in mines Specifies the requirements for the design, manufacture, and maintenance of monocable chairlifts with the carriers permanently attached and with detachable carriers. A4 31p EN PDF 31p EN Replaced by: SANS 273 (2018) 73.100.40
SANS 465 (2005) (2018-03-02) Standard specification for denatured fuel ethanol for blending with gasolines for use as automotive spark-ignition engine fuel This specification covers nominally anhydrous denatured fuel ethanol intended to be blended with unleaded or leaded gasoline at 1 to 10 volume % for use as a spark-ignition automotive engine fuel. A4 7p EN ASTM D4806-04a:2004, idt PDF 7p EN Replaced by: SANS 465 (2018) 75.160.20 SANS 585 (SABS 585) (2014) (2018-03-16) The production of frozen fish, marine molluscs, and products derived therefrom Specifies requirements for the handling, preparation, processing, packaging, transportation, freezing, storage and quality of frozen fish, marine molluscs, and products derived therefrom that are intended for human consumption. Also specifies requirements for factories and employees involved in the production of frozen fish, marine molluscs and products derived therefrom. Ed 4 A4 52p EN PDF 52p EN Replaced by: SANS 585 (SABS 585) (2018) 07.100.30; 67.120.30 SANS 650 (SABS 650) (2012) (2018-03-16) Laundry detergent (for use in non-automatic domestic washing machines) Specifies the characteristics of one type of laundry detergent intended for the washing (by hand and in non-automatic domestic washing machines) in either hard or soft water of textiles made of cotton or of cotton-and-synthetic fibre yarns. Ed 3.02 A4 10p EN PDF 10p EN Am 1(National), 2008-08-15 Am 2(National), 2012-11-30 Replaced by: SANS 650 (SABS 650) (2018) 71.100.40 SANS 704 (2004) (2018-03-16) Terminology work - Principles and methods Establishes and harmonizes the basic principles and methods for preparing and compiling terminologies both inside and outside the framework of standardization. Describes the links between objects, concepts, and their termonological representations. A4 47p EN ISO 704:2000, idt PDF 47p EN Replaced by: SANS 704 (2018) 01.020 SANS 757 (SABS 757) (2004) (2018-03-27) Sheet steel furniture Specifies requirements for stationary cupboards, linen cupboards, pigeon-hole cupboards, lockers, wardrobes, filing cabinets and card-index cabinets. Ed 3.03 A4 29p EN PDF 29p EN Am 1(National), 1991-08-01 Am 2(National), 2002-07-26 Am 3(National), 2004-10-29 Replaced by: SANS 757 (SABS 757) (2018) 77.140.50; 97.140 SANS 767-1 (SABS 767-1) (1982) (2018-03-19) Earth leakage protection units Part 1: Fixed earth leakage protection circuit-breakers Covers fixed earth leakage protection circuit-breakers for use in domestic and industrial or similar electrical installation on 50 Hz alternating current supply at voltages up to 500 V between conductors and currents up to 100 A. The rated earth leakage tripping currents covered are 5; 10 and 30 ma. (See also VC 8035) Ed 2 A4 22p EN PDF 22p EN Am 1(National), 1985-08-14 Am 2(National), 1997-04-07 Replaced by: SANS 556-2-2 (2015); SANS 556-2-1 (2018) 29.120.50
SANS 788 (2011) (2018-03-16) Frozen shrimps (prawns), langoustines and crabs Specifies requirements for the handling, preparation, processing, packaging, transportation, freezing, storage and quality of frozen shrimps (prawns), langoustines and crabs, and products derived therefrom which are intended for human consumption, whether frozen at sea or on shore. It also specifies requirements for factories and employees involved in the production..01 A4 42p EN PDF 42p EN Replaced by: SANS 788 (2018) 67.120.30 SANS 795 (SABS 795) (2014) (2018-03-27) Wheelbarrows Specifies the requirements for five types of wheelbarrows suitable for domestic, industrial, agricultural and building-site conditions. Ed 4 A4 15p EN PDF 15p EN 53.120 Am 1(National), 2002-02-22 Am 2(National), 2007-08-31 Replaced by: SANS 795 (SABS 795) (2018) SANS 950 (SABS 950) (2014) (2018-04-13) Unplasticized polyvinyl chloride rigid conduit and fittings for use in electrical installations Covers the material, dimensional and performance requirements of upvc rigid conduit and fittings. Appendix C contains recommended installation procedures. Ed 2.03 A4 33p EN PDF 33p EN Am 1(National), 2007-05-04 Am 2(National), 2008-10-03 Am 3(National), 2014-01-31 Replaced by: SANS 950 (SABS 950) (2018) 29.120.10; 83.140.30 Stage: 92.60 (2018-04-13) SANS 952-1 (2016) (2018-03-27) Polymer film for damp-proofing and waterproofing in buildings Part 1: Monofilament and co-extruded products Covers the requirements for five types of monofilament polyolefin film and four types of co-extruded polyolefin film, for use as a dampproofing material in walls, under concrete and under roofing tiles, and for the waterproofing of basements. Ed 2 A4 34p EN PDF 34p EN Replaced by: SANS 952-1 (2018) 83.140.10; 91.120.30 SANS 1216 (SABS 1216) (2002) (2018-03-16) Solvent-emulsion degreasers Specifies the requirements for 3 types of solvent-emulsion degreasers containing detergents and organic solvents intended for the cleaning of painted and unpainted surfaces of components, machinery and engines that are soiled with oil, grease and similar soils, and on which water may by used during the cleaning process. The degreasers are not intended for use on electrical equipment, delicate machine parts, rolling element bearings, winding steel cables or aircraft and aircraft components. Ed 2.02 A4 22p EN PDF 22p EN Am 1(National), 1997-06-09 Am 2(National), 2002-03-08 Replaced by: SANS 1216 (SABS 1216) (2018) 71.100.40 SANS 1218 (SABS 1218) (2008) (2018-03-02) Hydraulic oil (anti-wear type) Covers eight viscosity grades ( based on the classification system given in SANS 3448) of mineral oil with enhanced anti-oxidant, anticorrosion and anti-wear properties and suitable for use in hydraulic systems..05 A4 10p EN PDF 10p EN 75.120 Am 1(National), 1989-02-01 Am 2(National), 1991-05-01 Am 3(National), 1996-11-25 Am 4(National), 2005-03-18 Am 5(National), 2008-01-25 Replaced by: SANS 11158 (2017) Stage: 99.70 (2018-03-02)
SANS 1329-5 (SABS 1329-5) (2014) (2018-03-19) Retro-reflective and fluorescent warning signs for road vehicles Part 5: Retro-reflective chevron decals Covers requirements for retro-reflective warning signs manufactured as protective coated chevron decals having self-adhesive bases of pigmented vinyl or other polymeric material and intended for use on motor vehicles operating on public roads..05 A4 16p EN PDF 16p EN 43.040.20 Am 1(National), 1991-05-01 Am 2(National), 1998-12-04 Am 3(National), 2004-04-23 Am 4(National), 2006-05-12 Am 5(National), 2014-09-19 Replaced by: SANS 1329-4 (SABS 1329-4) (2017) SANS 1373 (SABS 1373) (2008) (2018-03-27) Chain-link fencing and its wire accessories Covers the requirements for chain-link fencing and straining and tie wires for use with it, made of zinc-coated steel wire or zinc-coated steel wire covered with polyvinyl chloride..01 A4 18p EN Am 1(National), 2008-10-24 PDF 18p EN Replaced by: SANS 1373 (SABS 1373) (2018) 77.140.99; 91.090 SANS 1453 (SABS 1453) (2011) (2018-04-13) Copper tubes for medical gas and vacuum services Covers requirements for plain-ended copper tubes suitable for low pressure medical gas and vacuum services and, using the preferred size range, suitable for jointing by compression fittings or capillary solder fittings that comply with SANS 1067-1 and SANS 1067-2 respectively..04 A4 13p EN PDF 13p EN 11.040.10; 77.150.30 Am 1(National), 1997-08-11 Am 2(National), 2008-07-18 Am 3(National), 2010-01-22 Am 4(National), 2011-03-18 Replaced by: SANS 1453 (SABS 1453) (2018) Stage: 92.60 (2018-04-13) SANS 1599-2 (SABS 1599-2) (2010) (2018-03-27) Cranes Part 2: Power-driven mobile cranes Specifies the requirements for the design, construction and testing of power-driven mobile and semi-mobile cranes that are road-wheel mounted, or tracked or have a fixed base, and whose characteristics include any combination of fully mobile, semi-mobile, portable, fully slewing, part-slewing, and non-slewing. Covers articulated jib cranes mounted on load-carrying vehicles but does not cover all the requirements for the road vehicle of which the crane is a part..02 A4 52p EN PDF 52p EN Am 1(National), 2003-11-21 Am 2(National), 2010-06-04 Replaced by: SANS 1599-2 (SABS 1599-2) (2018) 53.020.20 SANS 1774 (SABS 1774) (2016) (2018-03-16) Liquefied petroleum gases Specifies requirements for liquefied petroleum gas mixtures intended primarily for use as fuel in domestic, commercial and industrial installations where a fuel volatility between that of commercial propane and commercial butane is acceptable; for commercial propane intended primarily as fuel in installations which are designed to use a fuel of high volatility; and for commercial butane intended primarily as fuel in installations where fuel volatility is not necessarily a criterion. Ed 2 A4 12p EN PDF 12p EN Replaced by: SANS 1774 (SABS 1774) (2018) 75.160.30 SANS 5967 (SABS SM 967) (2013) (2018-03-27) Retention of preservative in timber (volume method) Specifies a means of determining the retention of preservative in timber by using the volume method. Ed 2.03 A4 4p EN PDF 4p EN 71.100.50; 79.040 Am 1(National), 2008-03-14 Am 2(National), 2011-09-30 Am 3(National), 2013-11-15 Replaced by: SANS 5967 (SABS SM 967) (2018)
SANS 5993 (SABS SM 993) (2004) (2018-03-27) Chromium detection in timber Specifies a method for the determination of the presence of chromium-containing preservatives (copper-chromium-arsenic compounds) in freshly treated timber..01 A4 2p EN Am 1(National), 2004-08-06 PDF 2p EN Replaced by: SANS 5993 (SABS SM 993) (2018) 71.100.50; 79.040 SANS 6082 (SABS SM 1082) (2008) (2018-03-16) Cleaning efficiency of high-foam laundry detergents Specifies a method for the determination of the cleaning efficiency of high-foam laundry detergents. Ed 3 A4 6p EN PDF 6p EN 71.100.40 Replaced by: SANS 6082 (SABS SM 1082) (2018) SANS 6195 (SABS SM 1195) (2006) (2018-03-19) Examination for the presence of viable Shigella organisms in foods Specifies a method of examining for the presence of viable Shigella organisms in foods..01 A4 10p EN PDF 10p EN 07.100.30 Am 1(National), 2006-10-06 Replaced by: SANS 21567 (2005) SANS 8914 (SABS ISO 8914) (1990) (2018-03-19) Microbiology - General guidance for the detection of Vibrio parahaemolyticus Gives general guidance for the detection of Vibrio parahaemolyticus present in products intended for human consumption or animal feeding stuffs. A4 17p EN ISO 8914:1990, idt Am 1(National), 2007-02-23 PDF 17p EN Replaced by: SANS 6196 (SABS SM 1196) (2006) 07.100.30 SANS 10086-3 (SABS 086-3) (2014) (2018-03-27) The installation, inspection and maintenance of equipment used in explosive atmospheres Part 3: Repair and overhaul of equipment Specifies instructions, principally of a technical nature, on the repair, overhaul, reclamation and modification of group I (mines) or group II (surface applications) certified apparatus designed for use in explosive atmospheres (other than explosive processing and manufacturing. Ed 2.01 A4 6p EN Am 1(National), 2014-05-30 PDF 6p EN Replaced by: SANS 10086-3 (SABS 086-3) (2018) 29.260.20 SANS 10160-1 (2011) (2018-03-16) Basis of structural design and actions for buildings and industrial structures Part 1: Basis of structural design Covers the basis of design and the actions on building structures industrial structures utilizing structural systems similar to those of building structures. Applicable for the structural appraisal of existing structures, for developing the design of repairs and alterations or for assessing changes of use..01 A4 83p EN PDF 83p EN Replaced by: SANS 10160-1 (2018) 91.010.30; 91.080.01 SANS 10160-3 (2011) (2018-03-16) Basis of structural design and actions for buildings and industrial structures Part 3: Wind actions Gives guidance on the determination of natural wind actions for the structural design of buildings and industrial structures including the entire structure, part of the structure, or elements attached to the structure..01 A4 92p EN PDF 92p EN Replaced by: SANS 10160-3 (2018) 91.010.30; 91.080.01
SANS 10231 (SABS 0231) (2014) (2018-03-16) Transport of dangerous goods by road - Operational requirements Establishes rules and procedures for the safe operation and handling of all road vehicles that are used for the transport of dangerous goods in accordance with the load constraints. Includes requirements for the consignor, the consignee, the operator, the driver and the qualified person as well as en route procedures, cargo handling, and vehicle inspection requirements. Ed 4 A4 168p EN PDF 168p EN 13.300; 43.020 SANS 10232-1 (SABS 0232-1) (2007) (2018-03-16) Transport of dangerous goods - Emergency information systems Part 1: Emergency information system for road transport Covers requirements for an emergency information system that needs to be in place for the transport of dangerous goods. Requirements are set for hazard class diamonds, placards and emergency information documents. Ed 3 A4 29p EN PDF 29p EN Replaced by: SANS 10232-1 (SABS 0232-1) (2018) 13.300 SANS 10232-4 (2012) (2018-03-16) Transport of dangerous goods - Emergency information systems Part 4: Transport emergency card Covers the requirements for a transport emergency card (TREC) to make the driver of a vehicle transporting dangerous goods by road aware of the danger associated with the load, and to indicate its use as a concise and quick reference in an emergency situation..02 A4 31p EN PDF 31p EN Replaced by: SANS 10232-4 (2018) 13.300 SANS 10343 (SABS 0343) (2003) (2018-03-16) Verification of non-automatic electronic self-indicating road vehicle mass measuring equipment for use by road traffic authorities Specifies requirements for the verification of non-automatic (static mass measurement) electronic self-indicating road vehicle mass measuring equipment for use by road traffic authorities..01 A4 11p EN Am 1(National), 2003-12-05 PDF 11p EN Replaced by: SANS 10343 (SABS 0343) (2018) 17.060; 43.020 SANS 103 (SABS 03) (2007) (2018-03-02) The safe application of underground railway driven and non-driven wheel sets Specifies the technical aspects relating to the design, construction, installation, maintenance and safe usage of underground railway driven and non-driven wheel sets and associated equipment. Is applicable to wheel sets used on underground railway tracks, and shall not exclude tracks found on the surface servicing the shaft itself. Ed 2 A4 18p EN PDF 18p EN Replaced by: SANS 103 (SABS 03) (2018) 45.060.01 SANS 10375 (2006) (2018-03-27) The inspection, testing and examination of overhead cranes Covers provisions for the inspection, testing and examination of overhead cranes in use. A4 12p EN PDF 12p EN 53.020.20 Replaced by: SANS 10375 (2018) SANS 11133-2 (2004) (2018-04-13) Microbiology of food and animal feeding stuffs - Guidelines on preparation and production of culture media Part 2: Practical guidelines on performance testing of culture media Sets criteria and methods for the performance testing of culture media. It applies to commercial bodies producing and/or distributing ready-touse or semi-finished reconstituted or dehydrated media to microbiological laboratories; non-commercial bodies supplying media to third parties; and microbiological laboratories preparing culture media for their own use and evaluating the performance of these media. A4 30p EN ISO/TS 11133-2:2003, idt PDF 30p EN Replaced by: SANS 11133 (2017) 07.100.30 Stage: 99.70 (2018-04-13)
SANS 11850 (2003) (2018-03-16) Machinery for forestry - Self-propelled machinery - Safety requirements Specifies safety requirements for common design aspects of mobile, ride-on, self-propelled forestry machines. It is applicable to fellers, bunchers, delimbers, forwarders, log loaders, skidders, processors, harvesters, and multi-function versions of these machine types, as defined in ISO 6814.It covers certain hazards common to forestry machinery, but does not, as a standard that addresses common requirements, deal with all the hazards (noise, vibration, thrown objects, etc.) which could exist on a particular machine. A4 15p EN ISO 11850:2003, idt PDF 15p EN Replaced by: SANS 11850 (2018) 65.060.80 SANS 13485 (2004) (2018-03-02) Medical devices - Quality management systems - Requirements for regulatory purposes Specifies requirements for a quality management system where an organization needs to demonstrate its ability to provide medical devices and related services that consistently meet customer requirements and regulatory requirements applicable to medical devices and related services, and aims to facilitate harmonized medical device regulatory requirements for quality management systems. A4 64p EN ISO 13485:2003, idt PDF 64p EN Replaced by: SANS 13485 (2018) 11.040.01 SANS 27000 (2014) (2018-03-16) Information technology - Security techniques - Information security management systems - Overview and vocabulary Describes the overview and the vocabulary of information security management systems, and defines related terms and definitions. Ed 2 A4 32p EN PDF 32p EN 01.040.35; 35.040 ISO/IEC 27000:2012, idt Replaced by: SANS 27000 (2018) SANS 50010 (2011) (2018-03-27) Measurement and verification of energy savings Provides a methodology for the determination of energy savings that may be used in a range of voluntary or regulatory processes which may require the impact of interventions on energy use to be calculated. A4 23p EN PDF 23p EN Replaced by: SANS 50010 (2018) 27.010 SANS 60332-1-3 (2005) (2018-03-27) Tests on electric and optical fibre cables under fire conditions Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles Specifies the test procedure for assessment of falling flaming droplets when a single vertical insulated electric conductor or cable, or optical fibre cable, is subjected to fire conditions, using 1 kw pre-mixed flame. A4 12p EN IEC 60332-1-3:2004, idt PDF 12p EN Replaced by: SANS 24729-2 (2009) 13.220.40; 29.060.20; 33.180.10 SANS 60335-1 (SABS IEC 60335-1) (2015) (2018-03-16) Household and similar electrical appliances - Safety Part 1: General requirements Deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for singlephase appliances and 480 V for other appliances. Ed 3.01 A4 173p EN IEC 60335-1:2013, idt Am 1, 2015-09-23 PDF 173p EN Replaced by: SANS 60335-1 (SABS IEC 60335-1) (2018) 97.020
SANS 60335-2-2 (SABS IEC 60335-2-2) (2013) (2018-03-16) Household and similar electrical appliances - Safety Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances Deals with the safety of electric vacuum cleaners and watersuction cleaning appliances for household and similar purposes, including vacuum cleaners for animal grooming, their rated voltage being not more than 250 V. Also applies to centrally-sited vacuum cleaners and automatic battery-powered cleaners. Ed 4.01 A4 29p EN IEC 60335-2-2:2012, idt IS 1(National), 2013-08-19 PDF 29p EN Replaced by: SANS 60335-2-2 (SABS IEC 60335-2-2) (2018) 97.080 SANS 60335-2-30 (SABS IEC 60335-2-30) (2013) (2018-03-27) Household and similar electrical appliances - Safety Part 2-30: Particular requirements for room heaters Deals with the safety of electric room heaters for household and similar purposes, their rated voltage being not more than 250 V for singlephase appliances and 480 V for other appliances. Ed 4 A4 31p EN IEC 60335-2-30:2009, idt PDF 31p EN Replaced by: SANS 60335-2-30 (SABS IEC 60335-2-30) (2018) 97.100.10 SANS 60811-201 (2012) (2018-03-27) Electric and optical fibre cables - Test methods for non-metallic materials Part 201: General tests - Measurement of insulation thickness Gives the methods for measuring the insulation thicknesses which apply to the most common types of insulating compounds (cross-linked, PVC, PE, PP, etc.). A4 12p EN IEC 60811-201:2012, idt PDF 12p EN Replaced by: SANS 60811-201 (2018) 29.035.01; 29.035.20 SANS 60811-202 (2012) (2018-03-27) Electric and optical fibre cables - Test methods for non-metallic materials Part 202: General tests - Measurement of thickness of non-metallic sheath Gives the methods for measuring thicknesses of non-metallic sheath which apply to the most common types of sheathing compounds (crosslinked, PVC, PE, PP, etc.). A4 13p EN IEC 60811-202:2012, idt PDF 13p EN Replaced by: SANS 60811-202 (2018) 29.035.01; 29.035.20 SANS 61241-4 (SABS IEC 61241-4) (2001) (2018-03-19) Electrical apparatus for use in the presence of combustible dust Part 4: Type of protection "pd" Gives requirements on the design, construction, testing and marking of electrical apparatus for use in combustible dust atmospheres in which a protective gas (air or inert gas), maintained at a pressure above that of the external atmosphere, is used to prevent the entry of dust which might otherwise lead to the formation of a combustible mixture within enclosures which do not contain a source of combustible dust. A4 25p EN IEC 61241-4:2001, idt Am 1(National), 2007-03-30 PDF 25p EN Replaced by: SANS 60079-2 (SABS IEC 60079-2) (2015) 29.260.20 SANS 61481 (SABS IEC 61481) (2005) (2018-03-02) Live working - Portable phase comparators for use on voltages from 1 kv to 36 kv a.c. Applies to portable phase comparators with or without a built-in power source to be used on electrical systems for voltages from 1 kv to 36 kv a.c. and frequencies from 50 Hz to 60 Hz..02 A4 p EN IEC 61481:2004, idt PDF p EN Am 1, 2003-08-15 Cor 1, 2007-02-02 Am 2, 2005-04-22 Cor 2, 2007-02-02 Replaced by: SANS 61481-1 (2016); SANS 61481-2 (2016) 13.260; 29.240.20; 29.260.99 Stage: 99.70 (2018-03-02)
SANS 62196-2 (2014) (2018-03-27) Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories Applies to plugs, socket-outlets, vehicle connectors and vehicle inlets with pins and contact-tubes of standardized configurations, referred to as accessories. Have a nominal rated operating voltage not exceeding 500 V a.c., 50 to 60 Hz, and a rated current not exceeding 63 A threephase or 70 A single phase, for use in conductive charging of electric vehicles. A4 59p EN IEC 62196-2:2011, idt PDF 59p EN Replaced by: SANS 62196-2 (2018) 29.120.30; 43.040.10; 43.120 SANS 62561-5 (2012) (2018-03-02) Lightning protection system components (LPSC) Part 5: Requirements for earth electrode inspection housings and earth electrode seals Specifies the requirements and tests for earth electrode inspection housings (earth pit) and earth electrode seals. A4 16p EN PDF 16p EN 29.020; 91.120.40 IEC 62561-5:2011, idt Replaced by: SANS 62561-5 (2018) M 33 A (1992) (2018-03-27) The international metric system (SI). Guide to the use of the SI in South Africa Covers guidelines to the use of the International Metric System (SI) in South Africa. Ed 2 A4 42p EN PDF 42p EN 01.060; 17.020 Stage: 99.70 (2018-03-27) Replaced by: SANS 80000-12 (2017); SANS 80000-11 (2017); SANS 80000-10 (2017); SANS 80000-9 (2017); SANS 80000-8 (2017); SANS