Workshop & Engineering 231
15 Workshop & Engineering 12 WR RN T Products in Kincrome Workshop & Engineering range now include Bench Grinders and Drill Presses. The Bench Grinders come in 3 sizes; 150mm, 200mm (both with flexible LED light) and 250mm. They feature Perspex Safety Guards, djustable Tool Rests and come with fine and coarse Silicone Carbide Stones. n 830mm Bench Grinder Stand is also available. Kincrome is proud to release the new range of Workshop Bench & Pedestal Drills. The bench mounted range includes the 5 speed model with 250W motor and overall height of 580mm while the larger bench mounted model features a variable speed 550W motor standing at an overall height of 940mm. The larger 550W model features a variable speed digital RPM display, laser guide, work light and adjustable roller guide. The floor mounted pedestal drill features a variable speed 550W motor and stands at an overall height of 1610mm and also features a digital RPM display, laser guide, work light and adjustable roller guide. ll models in the range are manufactured from cast iron steel, can be mounted to the bench or floor easily and are covered by the Kincrome equipment 12 Month Warranty. Kincrome Fan Range new range of floor, wall and pedestal fans is now available from Kincrome. Floor Fan is 20 (500mm) diameter, 240 Volt, silver finish, with adjustable tilt and aluminium blades. There are two types of Wall Fans - a) 20 (500mm) diameter, 240 Volt, silver finish, with adjustable tilt and aluminium blades; b) 30 (750mm), 240 Volt, black finish, with adjustable tilt and metal blades. There are also two types of Pedestal Fans - a) 20 (500mm) diameter, 240 Volt, silver finish, with adjustable tilt and aluminium blades; b) 30 (750mm), 240 Volt, black finish, with adjustable tilt and metal blades. This fan comes with a heavy duty base and is ideal industrial use. ll of the fans in the Kincrome range meet the ustralian and New Zealand standards. 232 Wet & Dry Vacuums new range of Wet and Dry Vacuums, has been released by Kincrome. The range includes 20, 30 and 60 litre size vacuums with 1200W motors, and the larger, industrial sized 80 litre vacuum with twin 1100W motors, all powered by 240 volt power with a easy to use on/off switch located on the top of each vacuum. The range features a tough stainless steel tank, 1.5 metre flexible suction hose for easy reach and a 5 metre power cable so you can move around with ease. One great feature of the vacuums is the inclusion of a blower port which is ideal for blowing, general cleaning, inflating mattresses and other inflatable products. The vacuums also include a sturdy plastic base with swivel castors for easy manoeuvrability, three accessories including a floor nozzle, dust brush and crevice nozzle which are all neatly housed within the vacuum base. Both the 30 and 60 litre models also include an accessory power socket on the top of the lid for power tools when using the vacuum as a dust extractor. Ideal for workshops, industrial use or on the work site, the range of wet and dry vacuums are designed to suit a range of commercial, industrial and domestic requirements. Kincrome offer Swivel Base Vices ranging from 100mm to 150mm jaw opening. They all feature a 360 swivel base with blue hammertone finish for corrosion prevention. The latest addition to the range is the 125mm Multipurpose Vice with rotating body and a degree scale.
Workshop & Engineering 15 190822 Tap & Die Set 110 Piece NC/NF/METRIC Manufactured from Tungsten steel, taps and dies suitable for cleaning and cutting threads on mild steel and aluminium. Contents held in plastic insert within a metal storage case. Contents: 1 djustable Tap Wrench 1/8-1/2 (3-13mm) capacity. 1 djustable Tap Wrench 1/4-3/4 (6-19mm) capacity. 1 Die Holder for 1 (25mm) O/D Dies. 1 Die Holder for 1.1/2 (38mm) O/D Dies. 1 T type wrench 1/4 (6mm) capacity. 70 taps (1 of each taper and bottoming taps in 35 sizes as mentioned below). 22 1 O/D round dies for sizes up to M11 x 1.5. 13 1.1/2 O/D round dies for sizes up to M18 x 1.5. Taps: 4NC40, 6NC32, 8NC32, 10NC24, 12NC24, 10NF32, 1/4 NC20, 1/4 NF28, 1/4 NS24, 1/4 NS40, 5/16 NC18, 3/8 NC16, 3/8 NF24, 7/16 NC14, 7/16 NF20, 1/2 NC10, 1/2 NF20, 9/16 NC12, 9/16 NF18, 5/8 NC11, 5/8 NF18, 3/4 NC10, 3/4 NF16, 1/8 NPT27, 1/8 NPT18, M6 x 1.0, 8 x 1.25, 10 x 1.5, 10 x 1.0, M11 x 1.5, 12 x 1.25, 12 x 1.75, 14 x 1.25, 18 x 1.5. Inner/outer 3/5 Tap & Die Sets 40 Piece Individual Tap & Dies Not vailable Inner/outer K12021 Metric 40 Piece 6/12 K12022 Imperial 40 Piece 6/12 Material: lloy Steel, with HRC 58-62 Tap & Die Sets 24 Piece Inner/outer K12024 Metric 24 Piece 6/12 K12025 Imperial 24 Piece 6/12 Material: lloy Steel, with HRC 58-62 K12024 Metric Contents: 11 Dies: 3x0.5, 4x0.7, 5x0.8, 6x1.0, 8x1.0, 8x1.25, 10x1.25, 10x1.5, 12x1.25, 12x1.5, 12x1.75 11 Taps: 5x0.8, 5x0.9, 6x0.75, 6x1.0, 8x1.0, 8x1.25, 10x1.25, 10x1.5, 12x1.75, 12x1.5, 1/8-27 NPT 1 Die Handle: 1 1 Tap Wrench: 1/2 K12025 Imperial Contents: 11 Dies: 1/4-20 NC, 1/4-28 NF, 5/16-18 NC, 5/16-24 NF, 3/8-16 NC, 3/8-24 NF, 7/16-14 NC, 7/16-20 NF, 1/2-13 NC, 1/2-20 NF, 1/8-27 NPT 11 Taps:1/4-20 NC, 1/4-28 NF, 5/16-18 NC, 5/16-24 NF, 3/8-16 NC, 3/8-24 NF, 7/16-14 NC, 7/16-20 NF, 1/2-13 NC, 1/2-20 NF, 1/8-27 NPT 1 Die Handle: 1 1 Tap Wrench: 1/2 Individual Tap & Dies Not vailable K12087 87 Piece Tungsten Steel HRC HRDNESS RTING: 58-63 Contents: 35 Die Sizes 10NC, 10NF, 1/4NC, 1/4NF, 5/16NC, 5/16NF, 3/8NC, 3/8NF, 7/16NC, 7/16NF, 5/8NC, 5/8NF, 1/2NC, 1/2NF, 1/2BSW, 1/8NPT, M3, M4, M5, M6, M8, M8*1, M10, M10*1, M10*1.25, M12, M12*1.25, M12*1.50, M14, M14*1.25, M14*1.5, M16, M16*1.5, M18*1.5, M20 35 Tap Sizes 10NC, 10NF, 1/4NC, 1/4NF, 5/16NC, 5/16NF, 3/8NC, 3/8NF, 7/16NC, 7/16NF, 5/8NC, 5/8NF, 1/2NC, 1/2NF, 1/2BSW, 1/8NPT, M3, M4, M5, M6, M8, M8*1, M8*1.5, M10, M10*1, M10*1.25, M12, M12*1.25, M12*1.5, M14, M14*1.25, M14*1.5, M16, M16*1.5, M20 5 Drill Bits 2.5MM, 3.3MM, 4.2MM, 5.0MM, 6.8MM 5 Screw Extractors No.1 No.2 No.3 No.4 No.5 2 Die Handles (1" & 1.5") 2 Tap djustable Tap Wrenches (1/16"-1/2") (1/4"-3/4") 1 T Type Tap Wrench 1/4" 1 Screwdriver 1 Screw-Pitch Gauge Tap & Die Set Individual Tap & Dies Not vailable K12021 Metric Contents: 17-Dies (mm) : 3X0.5, 3X0.6, 4X0.7, 4X0.75, 5X0.8, 5X0.9, 6X1.0, 6X0.75, 7X1.0, 7X0.75, 8X1.25, 8X1.0, 10X1.25, 10X1.5, 12X1.75, 12X1.5, 1/8-27 NPT 17-Taps (mm): 3X0.5, 3X0.6, 4X0.7, 4X0.75, 5X0.8, 5X0.9, 6X1.0, 6X0.75, 7X1.0, 7X0.75, 8X1.25, 8X1.0, 10X1.25, 10X1.5, 12X1.75, 12X1.5, 1/8-27 NPT 1 Tap Wrench - merican pattern 1/2 capacity 1 T Type Tap Wrench 1/4 capacity 1 Screwpitch Gauge 1 Die Handle 1 Screwdriver K12022 Imperial Contents: 17-Dies: 4-40, 6-32, 8-32,10-24,10-32,12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 1/8-27 NPT 17-Taps: 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20,1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 1/8-27 NPT 1 Tap Wrench - merican pattern 1/2 capacity 1 T Type Tap Wrench 1/4 capacity 1 Screwpitch Gauge 1 Die Handle 1 Screwdriver Individual Tap & Dies Not vailable 19157C Manufactured from chrome vanadium steel with square drive ends. Comprising one each of size:- 1 3-6mm 1/8-1/4 2 6-8mm 1/4-5/16 3 8-11mm 5/16-7/16 4 11-14mm 7/16-9/16 5 14-18mm 9/16-3/4 Packaged in a vinyl wallet Screw Extractor Set 5 Piece K12001 Kwik-Outs 6 Piece Damaged Screw & Bolt Remover Inner/outer 6/24 For use with most Cordless/Variable Speed Drills Shank Diameter 6mm (1/4 ) that have Forward and Reverse Mode Manufactured from tough 9CrSi alloy Removes Screw No: 3-5, 6-10, 12-14 Removes Bolt Sizes: 3-14mm or 1/8-9/16 Removes Fasteners: 2-8 Grade 233
15 Workshop & Engineering 12 WR RN T K13080 90 Litre Litres per Minute: 10-12 Detergent Capacity: Measurements: Tray Height: 45 Litres L: 700 x W: 500 x H: 890mm 250mm Bottom Storage Shelf Metal Flexible Hose Removable Parts Tray Replaceable Filter Submersible Pump Piano Hinged Lid with Metal Stay Ideal for Cleaning utomotive Parts Inner/outer 2/4 Parts Washer K13081 150 Litre Litres per Minute: 10-12 Detergent Capacity: Measurements: Tray Height: 75 Litres Bottom Storage Shelf Metal Flexible Hose Removable Parts Tray Replaceable Filter Submersible Pump Piano Hinged Lid with Metal Stay Ideal for Cleaning utomotive Parts Inner/outer 2/4 Spare Parts Parts Washer L: 1100 x W: 500 x H: 890mm 270mm Description K13080-FILTER Filter - To suit K13080, 1, 2 K13080-FLEXIBLE HOSE Flexible Hose - To suit K13080, 1, 2 K13080-PUMP Pump - To suit K13080, 1, 2 K13080-SWITCH Switch - To suit K13080, 1, 2 K13082 75 Litre Litres per Minute: 10-12 Detergent Capacity: Measurements: Tray Height: 23 Litres L: 715 x W: 480 x H: 890mm 200mm Metal Flexible Hose Removable Parts Tray Replaceable Filter Submersible Pump Piano Hinged Lid with Metal Stay Heavy Duty Castors (2 Lockable) 1 x Storage Shelf 1 x Parts Drain Shelf & Drain Tub Ideal for Cleaning utomotive Parts Inner/outer 2/4 Parts Washer K9012 Swivel Base Vice 100mm (4 ) Features Include: Large Size nvil Serrated Jaws 360º Swivel Base & Swivel Locking System Manufactured from Heavy Duty Steel Hammertone Blue Finish for corrosion prevention Fasten securely to bench Features rubber grips on handles 234 K9013 Swivel Base Vice 125mm (5 ) Features Include: Large Size nvil Serrated Jaws 360º Swivel Base & Swivel Locking System Manufactured from Heavy Duty Steel Hammertone Blue Finish for corrosion prevention Fasten securely to bench Features rubber grips on handles Features Include: Large Size nvil Serrated Jaws 360º Swivel Base & Swivel Locking System Manufactured from Heavy Duty Steel Hammertone Blue Finish for corrosion prevention Fasten securely to bench Features rubber grips on handles Maximum Jaw Opening 100mm Maximum Jaw Opening 125mm Maximum Jaw Opening 150mm Inner/outer 4/8 Inner/outer 4/8 Inner/outer 4/8 K9014 Swivel Base Vice 150mm (6 )
12 WR RN T Workshop & Engineering 15 K9070 Plate Vice Instantly holds materials fast & tight Doesn t allow materials to move or spin! Timber Lengths & Studs PVC Pipe Steel Pipe & Metal Columns Plastics Rebar Laminate Materials Conduit Fits multiple building materials for various trade or home projects Securely elevates materials off the ground Safely secures materials for cutting, drilling, smoothing or finishing Secure and tight vice grip Quicker and easier than conventional vices and workbenches Easy to store with handy hanging hole Includes measuring rule Highly visible K50005 Colour Mrerchandiser Box 240 Volt (50Hz) 250W Industrial Pedastal Fan 30 (750mm) Diameter djustable Height 1250mm - 1670mm (Blade Centre) 3 Blade Metal Fans djustable Tilt Heavy Duty Base Metal Construction High ir Flow Black Finish Oscillating 90 Degree Sweep Meets ustralian and New Zealand Standards Heavy Duty Base K13006 Pedestal Fan 30 (750mm) 30 (750mm) Industrial K13004 Pedestal Fan 20 (500mm) 20 (500mm) Small 240 Volt (50Hz) 100W 20 (500mm) Diameter 3 Blade luminium Fans djustable Height 900mm - 1060mm (Blade Centre) Low Noise High ir Flow Silver Finish Oscillating Function djustable Tilt Meets ustralian and New Zealand Standards K13005 Floor Fan 20 (500mm) 240 Volt (50Hz) 100W 20 (500mm) Diameter 3 Blade luminium Fans Low Noise High ir Flow Silver Finish djustable Tilt Meets ustralian and New Zealand Standards K9071 Timber Lok Instantly holds timber fast & tight Doesn t allow timber to move or spin! Increases Safety and Production Fits multiple timber sizes Ideal for trade, home DI & renovation projects Light weight & durable Quicker than conventional workbenches or vices Includes measuring rule Securely elevates timber off the ground Safely secures timber for cutting, drilling, smoothing or finishing Secure and tight vice grip Easy to store with handy hanging hole Highly visible K50006 Colour Mrerchandiser Box K13007 Wall Fan 30 (750mm) 240 Volt (50Hz) 250W Wall Mounted 30 (750mm) Diameter 3 Blade Metal Fans High ir Flow Black Finish Oscillating 90 Degree Sweep djustable Tilt Meets ustralian and New Zealand Standards K13003 Wall Fan 20 (500mm) 240 Volt (50Hz) 100W 20 (500mm) Diameter 3 Blade luminium Fans Low Noise High ir Flow Silver Finish Oscillating Function djustable Tilt Meets ustralian and New Zealand Standards 235
15 Workshop & Engineering 12 WR RN T Flexible Hose Flexible Hose Blower Port Blower Port ccessories Power Socket K15020 Wet & Dry Power Vacuum 20 Litre 240V / 1200W 1.5 Metre Flexible Hose ccessories - Floor Nozzle, Dust Brush, Crevice Nozzle Blower Port Suction Hose Length: 1.5 Metres Capacity Flow Rate Tank Material Motor Size Power Cable Length 20 Litres 40 L/S 1200 Watts 5 Metres K15035 Wet & Dry Power Vacuum 30 Litre 240V / 1200W 1.5 Metre Flexible Hose ccessories - Floor Nozzle, Dust Brush, Crevice Nozzle Power Socket Extendable Pipe Blower Port Suction Hose Length: 1.5 Metres 240 Volt Power Outlet Capacity Flow Rate Tank Material Motor Size Power Cable Length Extendable Pipe 30 Litres 40 L/S 1200 Watts 5 Metres Flexible Hose ccessories Blower Port Twin Motors Water Drain Pipe Water Drain Pipe Power Socket Tank Tilt Feature K15065 Wet & Dry Power Vacuum 60 Litre 240V / 1200W K15080 Wet & Dry Power Vacuum 80 Litre 240V / 2200W 1.5 Metre Flexible Hose ccessories - Floor Nozzle, Dust Brush, Crevice Nozzle Blower Port Water Drain Pipe Tank Material: Water Drain Pipe Suction Hose Length: 1.5 Metres 240 Volt Power Outlet Suits Capacity Flow Rate Tank Material Motor Size Power Cable Length Dust Bags for Wet & Dry Power Vacuums - 5 Piece Sets K15020-38 20 Litre ( K15020) and 30 Litre (K15035) K15065-45 60 Litre ( K15065) K15080-50 80 Litre ( K15080) 60 Litres 40 L/S 1200 Watts 5 Metres Twin Motors (2 x 1100W) ccessories - Floor Nozzle, Dust Brush, Crevice Nozzle Water Drain Pipe Tilt Tank Drain System Water Drain Pipe Suction Hose Length: 1.5 Metres Tank Tilt Feature (to empty contents) Inner/outer 4/8 K15020-39 Suits Capacity Flow Rate Tank Material Motor Sizes 20 Litre ( K15020), 30 Litre (K15035) and 60 Litre ( K15065) K15080-52 60 Litre ( K15065) Power Cable Length Hoses for Wet & Dry Power Vacuums - 5 Metre 80 Litres 120 L/S 2x 1100 Watts Twin Motor 5 Metres 236
12 WR RN T Workshop & Engineering 15 K15300 Bench Drill Press Bench Mounted Drill Press Depth Gauge Worklight Digital RPM Display Worklight Digital RPM Display Motor Chuck Capacity Swing Spindle Travel Speed Range Hose Overall Height 230v - 50Hz - 250watt 13mm 208mm 50mm 5 Speed 500-2500 RPM 580mm Laser Guided Variable Speed Laser Guided Variable Speed K15310 Bench Drill Press Bench Mounted Drill Press K15320 Pedestal Drill Press Pedestal Drill Depth Gauge djustable Roller Guide Work Light Laser Guide Digital RPM Display Depth Gauge djustable Roller Guide Work Light Laser Guide Digital RPM Display K15150 Bench Grinder 150mm (6 ) With Flexible LED Light Industrial Quality 230 volt 50 Hz Perspex Safety Guards djustable Tool Rests Stones: Fine (Silicone Carbide 60# Grit) Coarse (luminium Oxide 36# Grit) Motor 230v - 50Hz - 550watt Motor Chuck Capacity 16mm Chuck Capacity Swing Swing 305mm Spindle Travel Spindle Travel 80mm Spindle Speed Speed Range Variable Speed 450-2500 RPM Speed Range Overall Height 940mm Overall Height 230v - 50Hz - 550watt 16mm 305mm 80mm Variable Variable Speed 450-2500 RPM 1610mm Input Power No Load Speed Wheel Size 520 watts 2950min 150mm x 25mm x 32mm K15280 Bench Grinder Stand 830mm (33 ) Pedestal Style Three Legs djustable Tray Steel Construction Provision for Floor Mounting Universal Mounting Plate K15200 Bench Grinder 200mm (8 ) With Flexible LED Light Industrial Quality 230 volt 50 Hz Perspex Safety Guards Dust Extraction Vents djustable Tool Rests Stones: Fine (Silicone Carbide 60# Grit) Coarse (luminium Oxide 36# Grit) Input Power No Load Speed Wheel Size 900 watts 2950min 200mm x 25mm x 32mm K15250 Bench Grinder 250mm (10 ) Industrial Quality 230 volt 50 Hz Perspex Safety Guards Dust Extraction Vents djustable Tool Rests Stones: Fine (Silicone Carbide 60# Grit) Coarse ( luminium Oxide 36# Grit) Input Power No Load Speed Wheel Size 900 watts 2950min 250mm x 25mm x 32mm 237
15 Workshop & Engineering 12 WR RN T K13070 19.2v Cordless Impact Wrench 1/2 Drive Spare Parts Complete with 1 hour cut-off Battery Charger Description 2 x 19.2 volt heavy duty Battery Packs Super Power Impact Transmission K130020 Battery Charger - 19.2 volt Strong and durable metal front housing K130018 Battery Pack Maximum tightening torque 295ft/lb (400Nm) Fully charged battery can tighten & loosen approx 150 of 21mm wheel nuts K13070-28 Carbon Brush Replacement Carbon Brushes Suits 19.2v Cordless Impact Wrench (K13070) K13001 Personalise hand tools, sporting gear and toys. Everlasting message on gifts and trophies Security ID on valuables 2 batteries included Diamond Tip Spare Parts K13002 Description Engraver Engraver Diamond Spare Tip 1494 Soldering Iron 30W 12V Ideal for car and marine use. Includes 2.5m cable plus D.C. adaptor and stand. 1485 Soldering Iron Stand Quality stand with heavy duty metal base. Soldering Irons with Stand Expert Quality. Complies with ustralian Standards S/NZS 60335.2.45 2003. Size Inner/outer 1491 30W 240V 12/24 1492 60W 240V 12/24 1493 80W 240V 12/24 1486 Soldering Wire with Flux Top quality grade Soldering Wire with flux. Packed in individual reel. verage weight 10g. Soldering Irons Tips 3 Pce Sets Spare tips for 30/60/80 watt Soldering Irons. When replacing tips always make sure the tip is seated fully to heating element. 1487 1488 1489 238