CLASSIC WALL-MOUNTED PATIO HEATER User Manual English
CONTENTS SAFETY FIRST Safety... 3 Introduction... 4 Installation... 5 Operation... 6 Specifications... 7 --- WARRANTY --- All our Patio Heaters come with a 2-year full manufacturer s collect and return warranty (from the date of purchase). Proof of purchase will be required to qualify for the warranty. The warranty can t be transferred to a second owner. As part of our warranty agreement we take liability for collecting faulty items, as well as liability for any replacements and repairs. We ll also be liable for the cost of returning the items to you. Please note that we re not liable for any costs that are incurred by third party companies, including: builders or electricians. If the product has been tampered with or modified it will void the warranty. WARNING - When using electrical appliances, basic safety precautions should always be followed. Failure to comply with these instructions may cause a fire, electrical shock or other injury to persons or property. 1. Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present. Children of less than 3 years should be kept away unless continuously supervised. 2. Children between 3 and 8 years old should only be allowed to switch the appliance on/off, provided that it has been correctly installed in its intended operating position and they have been given supervision or instruction concerning the safe use of the appliance and understand the hazards involved. They should not plug in, regulate, perform maintenance or clean the appliance. 3. Do not use this heater with a programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly. 4. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool. 5. Do not place the unit close to curtains and/or other flammable objects. 6. Do not cover the unit with anything during operation or before the unit has cooled down following shut down. 7. Do not wrap the power supply cord round the unit. 8. Do not use this unit in a place with poor air quality, i.e. dust, steam, gas, etc. 9. Do not use this unit as a clothes drier or towel drier. 10. Do not use this unit as a sauna heater. 11. Do not use this unit as a room heater. 12. Do not use this unit for animal heating or incubation. 13. Do not immerse the unit into water for cleaning. 14. The unit is at high temperature during operation. It keeps hot for a period after shut down. Potential danger would occur when touching it during this period. 15. The unit must be handled with care, and avoid of vibration or hitting. 16. The unit must be securely grounded during operation. 17. If damaged, the unit must be repaired by the manufacturer. 18. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. 19. When assembling, keep clear from any board or flammable material. 20. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 21. Do not use on building sites, greenhouses, barns or stables or any environment where flammable dust may be present. 22. The head of the unit reaches high temperatures during operation. Always unplug the unit and wait until it is cool before cleaning. 23. The unit should be plugged in a socket, which is easily visible and reachable. 2 3
INTRODUCTION INSTALLATION Easily mountable on walls and roofs and powerful enough to heat any outside area with coverage up to 10m 2, the Classic wall-mounted heater is our most affordable infrared carbon fibre element model. Designed to heat people rather than the surrounding air, the infrared technology is unaffected by draughts (unlike gas heaters) making it extremely efficient in outdoor spaces and significantly reducing running costs. With no gas bottles or serviceable parts this heater is entirely maintenance free, and takes mere minutes to install. For convenience, you can control it via the included remote control. With a high IP55 rating the heater is safe for outdoor installation and use whatever the weather. From evenings on the patio to large conservatories, this heater is suitable for any application. The Classic wall-mounted heater is guaranteed to keep everyone comfortable and warm, so you never have to let cold weather spoil your evenings again. 1. Drill 4 holes positioned as shown below. Insert Plastic Plugs (#4) to the holes. 2. Align L Bracket (#2) to the holes, and then fix it with Tapping Screws (#3). 3. Insert L Tube to the hole (Section C) of Control Box (#1). Fix with the Screw (#5). Parts List & Diagram 1. Control Box 2. Bracket 3. Tapping Screw 4. Plastic Plugs 5. Screw Features Innovative electric heating technology produces 1800W of infrared heat Low glare carbon fibre heating element built to withstand over 5000 hours of use Heat distribution area up to 10m 2 Waterproof rating of IP55 making it perfect for outdoor use, whatever the weather Comes complete with wall-mount bracket for quick, simple installation Head can be tilted to the correct angle for optimal heat projection Control the device using the control panel or remote control Solid anodised extruded aluminium construction WARNING This heater is not equipped with a device to control the room temperature. Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided. 4 5
OPERATION SPECIFICATIONS Please follow the below instructions to operate your heater safely. NB - Install unit as per page 5 prior to operation. Operating instructions Connect the unit to the power supply Plug in the unit to a socket. Press button On for the heater on the control panel. The blue indicator light will start flashing, showing the heater is now in standby status. Turn Heater On Press button On for the heater on the control panel or the remote controller to switch on the heater. Then the blue indicator light for the heater will then light up. Turn Heater Off To switch off the heater, press the button Off on the control panel of the heater. If pressing the Off button on the control panel of the heater, the blue indicator light is off, and the remote control is not functional for the heater. Pressing the Off button for the heater on the remote control will only shift the appliance into standby status, and the blue indicator light for the heater start flashing again. Heating Power: 1800W Product Dimensions: 650mm (W) x 220mm (H) x 195mm (D) Product Weight: 2.7kg Heating Element: Carbon Fibre Tube Element Life: More than 5000 Hours Heat Distribution Area: Up to 10m 2 Heating Angle: 120 Heating Distance: 3.0m Power Supply: 220-240v, 50/60Hz Power Cable Length: 180cm Power Connection: British Standard (BS) Plug Control Method: Control Panel, Remote Control Control Function: Power On/Off Casing: Anodised Extruded Aluminium Construction Installation: Wall Mounted Tilt Angle Range: 25 Waterproof Rating: IP55 Insulation: Class 1 Certifications: CE, GS, IP55 Warranty: 2 Years 6 7
Optima Heaters, Unit 11, Aerodrome Close, Loughborough, LE11 5RJ 01509 323169 enquiries@optimaheaters.com