SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA, INC. 7250 Hudson Blvd., Suite 100 Oakdale, MN 55128 Jay Kogoma or Michelle Loeffler Phone 651 730 1188 ELECTRICAL Valid to: February 29, 2020 Certificate Number: 1427.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following Electromagnetic Compatibility (EMC) and Product Safety tests: Test Technology: Test Method(s) 1 : Emissions Radiated & Conducted (Unintentional Radiators) (Excluding Equipment within the Scope of CISPR 13) Radio (Intentional Transmitters) (Excluding DFS and SAR) CFR 47 FCC, Part 15 Subpart B (using ANSI C63.4:2014) and Part 18 (using MP-5:1986); ANSI C63.4:2009; CISPR 11; EN 55011; AS/NZS CISPR 11; CNS 13803; CAN/CSA CISPR 11; KN 11; CISPR 12; CISPR 14-1; EN 55014-1; KN 14-1; AS/NZS 1044; AS/NZS CISPR 14; CNS 13783-1; CISPR 15; EN 55015; AS/NZS CISPR 15; KN 15; CNS 13439; CISPR 22; EN 55022; EN 55032; AS/NZS CISPR 22; SI 961 Part 6.1; CNS 13438 (up to 6 GHz); CSA/CSA CISPR 22; KN 22; CISPR 25; CISPR 32; KN 32; AS/NZS CISPR 32; ANSI C63.10-2009; ANSI C63.10:2013 CFR 47 FCC Part 15 Subpart C (using ANSI C63.10:2013); ANSI C63.10:2009; CFR 47 FCC Parts 24, 90, and 95 (using TIA 603-D); RSS-Gen; RSS-123; RSS-210; RSS-213; RSS-243; RSS-247 Current Harmonics IEC 61000-3-2; EN 61000-3-2; KN 61000-3-2 Flicker & Fluctuations IEC 61000-3-3; EN 61000-3-3; KN 61000-3-3 Magnetic Emissions IEC 62233; EN 62233 Immunity Electrostatic Discharge IEC 61000-4-2; EN 61000-4-2; KN 61000-4-2 Radiated Immunity IEC 61000-4-3; EN 61000-4-3; KN 61000-4-3 Electrical Fast Transient/Burst IEC 61000-4-4; EN 61000-4-4; KN 61000-4-4 Surge Immunity IEC 61000-4-5; EN 61000-4-5; KN 61000-4-5 (A2LA Cert. No. 1427.01) 06/29/2018 Page 1 of 4
Test Technology: Test Method(s) 1 : Immunity (cont d) Conducted Immunity IEC 61000-4-6; EN 61000-4-6; KN 61000-4-6 Power Frequency Magnetic Field Immunity Pulse Magnetic Field Immunity Voltage Dips, Short Interruptions, & Line Voltage Variations IEC 61000-4-8; EN 61000-4-8; KN 61000-4-8 IEC 61000-4-9; EN 61000-4-9; KN 61000-4-9 IEC 61000-4-11; EN 61000-4-11; KN 61000-4-11 Generic & Product Specific EMC Standards Laboratory IEC/EN 61326-1; IEC/EN 61326-2-1; IEC/EN 61326-2-2; IEC/EN 61326-2-3; IEC/EN 61326-2-4; IEC/EN 61326-2-5; IEC/EN 61326-2-6; IEC/EN 61326-3-1; IEC/EN 61326-3-2 Medical IEC/EN 60601-1-2 ITE/Telecom CISPR 24; EN 55024; KN 24; KN 35; SI 961 Part 6.2; ICES-003; VCCI V-3 (up to 6 GHz) Generic IEC/EN 61000-6-1; KN 61000-6-1; IEC/EN 61000-6-2; KN 61000-6-2; IEC/EN 61000-6-3; KN 61000-6-3; IEC/EN 61000-6-4; KN 61000-6-4; CISPR 14-2; EN 55014-2; KN 14-2; EN 300 113-1; EN 300 113-2; EN 300 220-1; EN 300 220-2; EN 300 296-1; EN 300 296-2; EN 300 328; EN 300 390-1; EN 300 390-2; EN 300 422-1; EN 300 422-2; EN 300 440; EN 300 440-2; EN 301 489-1; KN 301-489-01; EN 301 489-3; KN 301-489-03; EN 301 489-5; KN 301-489-05; EN 301 489-17; KN 301-489-17; EN 301 489-27; KN 301-489-27; EN 301 489-29; KN 301-489-29; EN 301 839-1; KN 301-839-01; EN 301 839-2; KN 301-839-02; IEC 60947-10 Lighting Electrical Apparatus for the Detection and Measurement of Combustible Gasses, Toxic Gasses, or Oxygen IEC/EN 61547; KN 61547; IEC/EN 62493; ICES-005 EN 50270 Republic of Korea Technical Regulations Conformity Assessment Procedure of Radio Equipment (RRA Announce 2015-135, January 5, 2016) Product Safety ITE (excluding Mandrel Test) IEC 60950; IEC 60950-1; EN 60950; EN 60950-1; SI 60950 Part 1; IEC 60950-21; IEC 62040-1-1; UL 1950; UL 60950; UL 60950-1; CSA C22.2 No. 60950; CSA C22.2 No. 60950-1; AS/NZS 60950; AS/NZS 60950.1; IEC 60950-22 (A2LA Cert. No. 1427.01) 06/29/2018 Page 2 of 4
Test Technology: Test Method(s) 1 : Product Safety (cont d) Audio/Visual IEC 60065; EN 60065; UL 60065; CAN/CSA C22.2 No. 60065; IEC 62368-1; EN 62368-1; UL 62368-1; CAN/CSA 22.2 No. 62368-1 Medical IEC 60601-1; EN 60601-1; UL 60601-1; CSA C22.2 No. 60601-1; AS/NZS 3200; AAMI ES60601-1; IEC 60601-1-1; IEC 60601-1-3; IEC 60601-1-4; IEC 60601-1-6; IEC 60601-1-8; IEC 60601-1-9; IEC 60601-1-10; IEC 60601-1-11 (excluding sections 10.1.2a, 10.1.2b, 10.1.3b, and 10.1.3c); IEC 60601-2-1; IEC 60601-2-2; IEC 60601-2-6; IEC 60601-2-7; IEC 60601-2-8; IEC 60601-2-10; IEC 60601-2-11; IEC 60601-2-12; IEC 60601-2-13; IEC 60601-2-17; IEC 60601-2-18; IEC 60601-2-25; IEC 60601-2-26; IEC 60601-2-27; IEC 60601-2-28; IEC 60601-2-32; IEC 60601-2-33; IEC 60601-2-37; IEC 60601-2-38; IEC 60601-2-40; IEC 60601-2-41; IEC 60601-2-44; IEC 60601-2-45; IEC 60601-2-46; IEC 60601-2-47; IEC 60601-2-52; IEC 60601-2-54; IEC 80601-2-60; IEC 60601-2-63; IEC 60601-2-68; ISO 80601-2-12; ISO 80601-2-13; ISO 80601-2-55; ISO 80601-2-61; ISO 80601-2-67; ISO 80601-2-69; IEC 62304; IEC 62366 Laboratory IEC 61010-1; EN 61010-1; UL 61010-1; CSA C22.2 No. 61010-1; AS 61010; IEC 61010-2-010; IEC 61010-2-020; IEC 61010-2-040; IEC 61010-2-042; IEC 61010-2-051; IEC 61010-2-081; IEC 61010-2-101; IEC 61010-2-201 Household IEC 60335-1; EN 60335-1; UL 60335-1; CSA C22.2 No. 60335-1; AS/NZS 60335; IEC 60335-2-2; IEC 60335-2-10; IEC 60335-2-24; IEC 60335-2-42; IEC 60335-2-53; IEC 60335-2-67; IEC 60335-2-68; IEC 60335-2-69; IEC 60335-2-72; IEC 60335-2-75; IEC 60335-2-82; IEC 60335-2-90 (excluding clauses 22.EE.101, 22.EE.102, and EE:31) Industrial Machinery IEC 60204-1; EN 60204-1 Life Safety and Security LSS EN 50130-4; EN 50130-5; EN 50131-1; EN 50131-3; EN 50131-4; EN 50131-6; EN 50131-2-2; EN 50131-2-3; EN 50131-2-4; EN 50131-2-5; EN 50131-2-6; EN 50131-5-3; EN 50133-1; EN 50134-1; EN 50134-2; EN 50134-3; EN 50136-1; EN 50136-1-1; EN 50136-1-2; EN 50136-1-2-3; EN 50136-1-3; EN 50136-1-4; EN 50136-2; EN 50136-2-1; EN 50136-2-2; EN 50136-2-3; EN 50136-2-4; EN 50136-3; IEC 60839-11-1; IEC 62599-1; IEC 62599-2 On the following products or types of products: Industrial, Scientific, and Medical (ISM) Equipment; Information Technology Equipment (ITE); Appliances, Power Tools, and Electrical Lighting 1 The laboratory is only accredited for testing activities outlined within the test methods listed above. Reference to any other activity within these standards, such as risk management or risk assessment, does not fall within the laboratory s accredited capabilities. (A2LA Cert. No. 1427.01) 06/29/2018 Page 3 of 4
Testing Activities Performed in Support of FCC Declaration of Conformity and Certification in Accordance with 47 Code of Federal Regulations and FCC KDB 974614, Appendix A, Table A.1 2 : Rule Subpart/Technology Test Method Maximum Frequency (MHz) Unintentional Radiators Part 15B ANSI C63.4:2014 40000 Industrial, Scientific, and Medical Equipment Part 18 FCC MP-5 (February 1986) 40000 Intentional Radiators Part 15C ANSI C63.10:2013 40000 2 Accreditation does not imply acceptance to the FCC equipment authorization program. Please see the FCC website (https://apps.fcc.gov/oetcf/eas/) for a listing of FCC approved laboratories. (A2LA Cert. No. 1427.01) 06/29/2018 Page 4 of 4
Accredited Laboratory A2LA has accredited INTERTEK TESTING SERVICES NA, INC. Oakdale, MN for technical competence in the field of Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 29 th day of June 2018. President and CEO For the Accreditation Council Certificate Number 1427.01 Valid to February 29, 2020 For the tests to which this accreditation applies, please refer to the laboratory s Electrical Scope of Accreditation.