ELEMENTAL S ERIES NATURE BETT ER BY NATURE
SEARCHING FOR THE UTMOST IN SPACE CONDITIONING? With an Elemental GeoExchange system you can take advantage of the most energy-efficient, environmentally clean, and cost effective space conditioning technology on the market today. * NATURAL SELECTION - THE EVOLUTION OF HEATING & COOLING GeoExchange technology harnesses the Earth s renewable thermal energy stored just below the surface or in large bodies of water for the purposes of providing forced air heating and cooling, hot and chilled water and dehumidification. The system exchanges the natural heating and cooling properties of the Earth between a building and the ground. This transfer of energy is the source of enhanced performance and environmental superiority as GeoExchange systems employ a small amount of electrical energy to capture, move and concentrate a large amount of free energy provided by the Earth. The result is the utmost in space conditioning. THE ELEMENTAL ADVANTAGE Flexibility - A single Elemental unit is capable of supplying all of the heating, cooling and domestic hot water required. No matter the climate or location, whether in the Arctic or near the Equator, an Elemental unit will provide worry-free performance. Reliability & Maintenance - The Elemental contains few moving parts and can operate reliably for years with little maintenance (Approximately one third when compared to conventional HVAC equipment**). All components within the Elemental product line have been chosen for their long-term reliability and durability. System Performance and Controls - The industry leading proprietary controls come standard on each and every Elemental unit. The controller offers precise zone temperature control, overall system monitoring and optimization, and automatic alert messaging that provides notification if the system is not operating at peak performance. Sunlight 100% Reflected - Atmosphere 6% EARTH S ENERGY BUDGET Reflected - Surface 4% Reflected - Clouds 20% Absorbed - Atmosphere 16% Absorbed - Clouds 3% The earth is a huge energy storage device that absorbs~47% of the sun s energy, over 500 times more energy than mankind needs every yearin the form of clean, renewable energy Safe & Clean - Elemental units produce no carbon monoxide and no greenhouse gas emissions. Simply installing an Elemental system is equivalent to planting an entire acre of trees or taking two cars off the road.*** Electrical unit 1 4 + + 3 Free Earth Energy + 4 Units of Heating or Cooling distributed to your home Extremely Cost Effective - The Elemental operating efficiencies and proprietary state of the art controls can provide up to 70% savings on heating and cooling costs when compared to conventional equipment. As it takes only 1 unit of electricity to create 4 units of heat energy, the use of an Elemental equates to tremendous overall efficiency and cost savings. Enhanced Comfort - Elemental systems produce consistent uniform heating, free of hot-spots often seen with furnaces and other conventional heating appliances, while offering increased dehumidification in cooling mode. Utility company polls indicate a higher level of customer satisfaction for GeoExchange than for conventional systems: more than 95 percent of all GeoExchange customers would recommend such systems to a family member or a friend.**** Significant ROI - From the moment the highly energy efficient Elemental unit is installed into a residence it is affording the owner a positive return on investment. If the cost of installation is added to a mortgage a home owner can expect a net positive cash flow immediately given the monthly operating savings from GeoExchange versus otherwise conventional operating costs. In a retrofit situation, home owners will typically recover their initial investment through energy savings over a reasonable period of time. Furthermore, GeoExchange systems can significantly increase property and resale values by potentially offering an increase in market value of $20 for every $1 of utility bill savings.***** * EPA/US DOE/NR CAN **US DOE ***GeoExchange Org ****GeoExchange Org *****Oakridge National Laboratory
The Elemental Atlas is a high efficiency, eco-friendly comfort system that combines hydronic heating (radiant floor, domestic hot water, pools/ spas and snow melt) with forced air heating & cooling all in one convenient unit. The Atlas is engineered exclusively with the green, performance enhancing refrigerant R410A, integrates the most advanced user friendly controls on the market today and is available in both vertical and horizontal configurations to meet any/all space requirements. ATLAS UNIT FEATURES Elemental Controls - The system controller is programmed to regulate and monitor the Atlas for maximized efficiencies. The controls incorporate an LCD messaging/ notification screen with a simple keypad to promote functionality through ease of use. On board diagnostics and user menus afford easy modification of home comfort levels, provide instant alerts to system faults and further assist in component troubleshooting and servicing. R-410A - A high performance refrigerant that can absorb and release heat more efficiently than R22, the former industry standard. R-410A is an environmentally friendly refrigerant that does not deplete the Earth s ozone layer. Scroll Compressors - Hermetically sealed scroll compressors provide years of efficient, quiet and reliable performance. The compressors synthetic lubricants mix and circulate efficiently with R-410A keeping the compressor and other moving parts resistant to internal damage while extending their life. On Demand Hydronic/ Radiant Heat or Forced Air Heating - The integrated controls allow the homeowner to seamlessly switch between the Atlas heating modes based on their particular preference. Electronically Commutated Motor (ECM) - The variable speed ECM fan motor provides an adjustable rate for improved comfort, quiet operation and increased efficiency. The motor increases speed slowly and is able to adjust to a constant flow rate regardless of the external static pressure, resulting in consistent gentle air circulation to reduce hot and cold spots throughout your home. 2 Electrostatic Air Filters - Electrostatic air filters are high performance, all season, extremely durable air cleaners that offer superior air filtration, removing up to 90% of common contaminants by weight, without excessive restriction to air flow. Steel Cabinet - The outer steel cabinet is fully insulated, ceramic coated and corrosion resistant providing for system longevity, quiet operation and long lasting beauty. Oversized Heat Exchangers - Atlas systems are designed with oversized air and coaxial heat exchangers that produce increased operating efficiencies and greater cost savings. Analog Temperature Sensors - Sensors are located at key control points, allowing for real time performance data collection to assist the smart controls for optimal unit operation. 10 Year Limited Warranty - When you purchase a Geofinity Atlas model, relax and enjoy the comfort. The Atlas carries a 10 year limited warranty - flexible warranty buy-down options are also available. OPTIONS TO FIT YOUR EVERY NEED Dual Speed Compressor - A two-stage scroll compressor provides the ultimate in comfort and efficiency. When only partial conditioning is required, the compressor operates at a lower capacity to save additional energy while always maintaining a pleasant living environment. Desuperheater - The hot water assist add-on provides supplemental Domestic Hot Water production by preheating your potable water supply for delivery to your hot water tank whenever the unit is running. All Atlas models equiped with a Desuperheater option are installed with an internally mounted circulation pump. Cupronickel Heat Exchanger - Cupronickel is used for those applications where harsh water conditions exist on the source and /or load side. PSC - A PSC blower motor is available for single speed applications (Low, Medium or High). Electric Heater - This add-on component provides auxiliary backup electric heat.
TANGAROA UNIT FEATURES The Elemental Tangaroa is a high efficiency, eco-friendly reversible hydronic system that provides heating & chilled water at a fraction of the cost and energy required of conventional systems. The Tangaroa is engineered exclusively with the green, performance enhancing refrigerant R410A and integrates the most advanced user-friendly controls available on the market today. Tangaroa units can provide for direct hydronic heating & cooling, radiant floor heating, domestic hot water, pool/ spa, and/or snow melt applications. Elemental Controls - The system controller is programmed to regulate and monitor the Tangaroa for maximized efficiencies. The controls incorporate an LCD messaging/ notification screen with a simple keypad to promote functionality through ease of use. On board diagnostics and user menus afford easy modification of home comfort levels, provide instant alerts to system faults and further assist in component troubleshooting and servicing. R-410A - A high performance refrigerant that can absorb and release heat more efficiently than R22, the former industry standard. R-410A is an environmentally friendly refrigerant that does not deplete the Earth s ozone layer. Scroll Compressors - Hermetically sealed scroll compressors provide years of efficient, quiet and reliable performance. The compressors synthetic lubricants mix and circulate efficiently with R-410A keeping the compressor and other moving parts resistant to internal damage while extending their life. Steel Cabinet - The outer steel cabinet is fully insulated, ceramic coated and corrosion resistant providing for system longevity, quiet operation and long lasting beauty. Oversized Heat Exchangers - Tangaroa systems are designed with oversized coaxial heat exchangers that produce increased operating efficiencies and greater cost savings. Analog Temperature Sensors - Sensors are located at key control points, allowing for real time performance data collection to assist the smart controls for optimal unit operation. 10 Year Limited Warranty - When you purchase a Geofinity Tangaroa model, relax and enjoy the comfort. The Tangaroa carries a 10 year limited warranty - flexible warranty buy-down options are also available. OPTIONS TO MEET YOUR EVERY NEED Dual Speed Compressor - A two-stage scroll compressor provides the ultimate in comfort and efficiency. When only partial conditioning is required, the compressor operates at a lower capacity to save additional energy while always maintaining a pleasant living environment. Desuperheater - This hot water assist add-on provides supplemental Domestic Hot Water production by preheating your potable water supply for delivery to your hot water tank whenever the unit is running. All Tangaroa models equipped with a Desuperheater option are installed with an internally mounted circulating pump. Cupronickel Heat Exchanger - Cupronickel is used for those applications where harsh water conditions exist on the source and/or load side.
TRIAKUS UNIT FEATURES The Elemental Triakus is a high efficiency, eco-friendly hydronic system that provides superior home and hot water heating performance. The Elemental Triakus is engineered exclusively with the green, performance enhancing refrigerant R410A and integrates the most advanced user-friendly controls available on the market today. Triakus units provide for radiant floor heating, domestic hot water, pools/ spas, and/or snow melt applications. Elemental Controls - The system controller is programmed to regulate and monitor the Triakus for maximized efficiencies. The controls incorporate an LCD messaging/ notification screen with a simple keypad to promote functionality through ease of use. On board diagnostics and user menus afford easy modification of home comfort levels, provide instant alerts to system faults and further assist in component troubleshooting and servicing. R-410A - A high performance refrigerant that can absorb and release heat more efficiently than R22, the former industry standard. R-410A is an environmentally friendly refrigerant that does not deplete the Earth s ozone layer. Scroll Compressors - Hermetically sealed scroll compressors provide years of efficient, quiet and reliable performance. The compressors synthetic lubricants mix and circulate efficiently with R-410A keeping the compressor and other moving parts resistant to internal damage while extending their life. Steel Cabinet - The outer steel cabinet is fully insulated, ceramic coated and corrosion resistant providing for system longevity, quiet operation and long lasting beauty. Oversized Heat Exchangers - Triakus systems are designed with oversized coaxial heat exchangers that produce increased operating efficiencies and greater cost savings. Analog Temperature Sensors - Sensors are located at key control points, allowing for real time performance data collection to assist the smart controls for optimal unit operation. 10 Year Limited Warranty - When you purchase a Geofinity Triakus model, relax and enjoy the comfort. The Triakus carries a 10 year limited warranty - flexible warranty buy-down options are also available. OPTIONS TO MEET YOUR EVERY NEED Dual Speed Compressor - A two-stage scroll compressor provides the ultimate in comfort and efficiency. When only partial conditioning is required, the compressor operates at a lower capacity to save additional energy while always maintaining a pleasant living environment. Desuperheater - This hot water assist add-on provides supplemental Domestic Hot Water production by preheating your potable water supply for delivery to your hot water tank whenever the unit is running. All Triakus models equipped with a Desuperheater option are installed with an internally mounted circulating pump. Cupronickel Heat Exchanger - Cupronickel is used for those applications where harsh water conditions exist on the source and/or load side.
ZEPHYRUS UNIT FEATURES Elemental Controls - The system controller is programmed to regulate and monitor the Zephyrus for maximized efficiencies. The controls incorporate an LCD messaging/ notification screen with a simple keypad to promote functionality through ease of use. On board diagnostics and user menus afford easy modification of home comfort levels, provide instant alerts to system faults and further assist in component troubleshooting and servicing. The Elemental Zephyrus is a high efficiency, eco-friendly forced air heating and cooling system designed as the ultimate comfort solution. The Zephyrus is engineered exclusively with the green, performance enhancing refrigerant R410A, integrates the most advanced user friendly controls on the market today, and is available in both vertical and horizontal configurations to meet any space requirements. R-410A - A high performance refrigerant that can absorb and release heat more efficiently than R22, the former industry standard. R-410A is an environmentally friendly refrigerant that does not deplete the Earth s ozone layer. Scroll Compressors - Hermetically sealed scroll compressors provide years of efficient, quiet and reliable performance. The compressors synthetic lubricants mix and circulate efficiently with R-410A keeping the compressor and other moving parts resistant to internal damage while extending their life. Electronically Commutated Motor (ECM) - The variable speed ECM fan motor provides an adjustable rate for improved comfort, quiet operation and increased efficiency. The motor increases speed slowly and is able to adjust to a constant flow rate regardless of the external static pressure, resulting in consistent gentle air circulation to reduce hot and cold spots throughout your home. 2 Electrostatic Air Filters - Electrostatic air filters are high performance, all season, extremely durable air cleaners that offer superior air filtration, removing up to 90% of common contaminants by weight, without excessive restriction to air flow. Steel Cabinet - The outer steel cabinet is fully insulated, ceramic coated and corrosion resistant providing for system longevity, quiet operation and long lasting beauty. Oversized Heat Exchangers - Zephyrus systems are designed with oversized air and coaxial heat exchangers that produce increased operating efficiencies and greater cost savings. Analog Temperature Sensors - Sensors are located at key control points, allowing for real time performance data collection to assist the smart controls for optimal unit operation. 10 Year Limited Warranty - When you purchase a Geofinity Zephyrus model, relax and enjoy the comfort. The Zephyrus carries a 10 year limited warranty - flexible warranty buy-down options are also available. OPTIONS TO MEET YOUR EVERY NEED Dual Speed Compressor - A two-stage scroll compressor provides the ultimate in comfort and efficiency. When only partial conditioning is required, the compressor operates at a lower capacity to save additional energy while always maintaining a pleasant living environment. Desuperheater - This hot water assist add-on provides supplemental Domestic Hot Water production by preheating your potable water supply for delivery to your hot water tank whenever the unit is running. All Zephyrus models equipped with a Desuperheater option are installed with an internally mounted circulating pump. Cupronickel Heat Exchanger - Cupronickel is used for those applications where harsh water conditions exist on the source and/or load side. PSC - A PSC blower motor is available for single speed applications (Low, Medium or High). Electric Heater - This add-on component provides auxiliary backup electric heat.
GEOEXCHANGE LOOP-FIELD CONFIGURATIONS Geofinity installers are trained to assess and provide the optimum type of geo-field design for each specific project site. The most favorable loop configuration will be determined through consideration of geological conditions, available land space, drilling & trenching requirements and the ensuing overall installation costs. Vertical Loop Vertical systems are used when land area is limited. For a vertical system, holes are drilled 10-20 feet apart and 100-400 feet deep in a grid matrix. A pair of pipes that are connected at the bottom with a U-bend are inserted into each bore hole. The pipes are then manifolded together and brought into the home. Horizontal Loop This type of installation is generally the most cost-effective for residential installations where sufficient land is available. It requires trenches to be dug by a backhoe or trencher to approximately 6 feet. GeoExchange pipe is then layered in the trenches, and the trenches are backfilled with soil. Pond/Lake Loop If the site has an adequate body of water close to the residence, approx. 1/2 acre by 8 feet deep, this may be the lowest cost option. Supply and return pipes are run underground from the home to the pond/lake and connected to a series of closed coils. These coils are submerged to the bottom of the pond/lake. Open-Loop System This type of system is used when an abundant supply of quality well water is available. Ground water is withdrawn from the aquifer/well and pumped into the heat pump. The discharge water is directed to a secondary well. The supply aquifer/well must have adequate capacity to provide flow for the heat pump and domestic water. ELEMENTAL CONTROLS - IT S SMART TECHNOLOGY Geofinity has incorporated proprietary controls into it s entire product line, designed to regulate and monitor the system for maximum efficiencies. No other equipment in the GeoExchange space possesses the same integrated controls capabilities. The controller houses a keypad and a liquid crystal diode, or LCD screen. Some of the primary realized benefits are: Multi-zone comfort - offers 15 zones standard with potential for up to 99 An LCD screen and simple keypad are incorporated into the controller to promote equipment functionality through ease of use The system can be upgraded to become interoperable with other building management systems and create an integrated smart building The LCD screen constantly displays active and stored data, providing the operator with quality of service and performance. The keypad is outfitted with simple, easy to understand, colored pads and directional arrows that simplify data collection and storage. The system is designed to provide standard notifications, such as the outside temperature, set point and inside temperature, troubleshooting notifications, as well as changeover from heating to cooling and the existence of a fouled or dirty air filter. TRULY THE ONLY CUTTING-EDGE GEOEXCHANGE MANUFACTURER Geofinity has emerged as an industry-leading manufacturer of highly innovative GeoExchange systems. Combining unique and proprietary controls driven product design, with the manufacturing expertise of true GeoExchange industry pioneers, Geofinity finds itself at the forefront of the rapidly growing GeoExchange market. With a decade of R&D, and years of successful commercial product sales and installation experience, Geofinity is positioned to make a widespread global impact. Geofinity promises when purchasing the Elemental GeoExchange system you will always receive the ultimate in comfort and affordability. AVAILABLE LOCALLY THROUGH: th 7056 Portal Way, Unit N-4. Ferndale, Wa. 98248 T: 1.866.213.0742 ~ F: 1.866.213.0742 www.geofinitymanufacturing.com ~ info@geofinitymanufacturing.com Member of Canadian GeoExchange Coalition Geofinity is always working to improve its product line. It is therefore possible that the design and the specifications of equipment ordered may change without notice and may not be exactly as per the description contained herein. Statements and other information made within are not warranties, whether express or implied, and do no not and should not be construed as a definitively final representation of any/all of the pertinent and current up-to-date information relating to the products. Please always contact Geofinity customer service for confirmation of any design or specification modification details.