micropac. Personal Gas Detection Instruments ST-53-99
Chemical Industry... Metal Industry... ST-51-99 In many fields of industry and at numerous workplaces people have to be protected against gas hazards. In the metal-working industry high CO concentrations represent a permanent danger. People working in the petrochemical industry have to be warned in time against too high H 2 S concentrations. Oxygen deficiency and surplus are other dangers requiring permanent monitoring. micropac is a compact gas warning instrument available in three versions (CO, H 2 S and O 2 ) to monitor the ambient air in industry, during the transport of dangerous goods and at other workplaces exposed to gas hazards. This state-of-the-art instrument incorporates various outstanding features: extremely long operating period pocket size versatile clip infrared interface for data transmission wide temperature and humidity range extremely functional small, robust housing different display variants optimized electrochemical DrägerSensors international Ex-approvals ST-315-98 2
Transport... Oil and Gas... micropac! ST-79-99 ST-329-98 3
The pocket-sized gas warning instrument Equipment The micropac family comes in three versions: micropac CO, micropac H 2 S and micropac O 2. All instruments are equipped with a well arranged display providing the most important information. During the development of micro- Pac the main focus was laid on a long operating period of the unit without exchange of sensors or battery. Two buttons provide for ease of operation. The instruments can be configured via an infrared interface. micropac allows adjustment of different display modes, other alarm limits, measuring units (mg/m 3 ) or a life signal. As special accessory a helmet holder is available allowing for the device to be carried not only at the chest pocket or belt, but also at the helmet. Sensors The sensors installed in the micro- Pac instruments are based on the DrägerSensors XS EC. Optimized for the use with micropac, they guarantee lowest drift, cross-sensitivities and longest service life for application of the unit over a period of two years without calibration. Renewal After a 2-year operating period (1 year in case of micropac O 2 ) the user may have the instrument renewed or receive a reconditioned unit upon return of the used one. This low-cost method then allows an operating period of another two years. ST-317-98 ST-361-98 4
Technical Data Three versions for CO, H 2 S and O 2 CO measuring range H 2 S measuring range O 2 measuring range Ambient conditions during operation Storage conditions: 0 to 30 C 30 to 80% r.h. Protection class: IP 54 Operating period (with a lithium battery, typical at 25 C) Dimensions (W x H x D) in mm 54 x 84 x 32 Weight 105 g Loudness of horn (typical at a distance of 30 cm) Approvals: Order Information 400 ppm 100 ppm 25 % by vol. -20 to 50 C, for short periods -40 to 60 C (limited display function) 700 to 1300 hpa 10 to 95% r.h., for short periods 5 to 99% r.h. 2 years for CO and H 2 S (when operated 9 hours per day and generating an alarm for 1 minute per day) 1 year for O 2 > 90 db A CE-mark II1G, EEx ib IIC T4-40 C < Ta < 55 C I M1, EEx ia I DMT 98 ATEX E021X C UL US Class I,II,III Div I, Group A,B,C,D,F,G Temp code T4-40 C < Ta < 55 C, Ex ia Description Order No. The versions: micropac CO 64 08 400 micropac O 2 64 08 410 micropac H 2 S 64 08 420 Replacement sensors: DrägerSensor XS EC micropac CO 68 10 030 DrägerSensor XS EC micropac H 2 S 68 10 032 DrägerSensor XS EC micropac O 2 68 10 034 Filters: Selective filter D3T, for CO sensor 68 09 022 Dust filter (external) 68 08 244 Accessories: Leather bag 64 08 388 Helmet holder to carry the unit at the helmet (similar to picture on the right) 64 08 387 Software set including the PC software micropacvision, a technical manual and a calibration adapter 64 08 505 ST-80-99 ST-43-99/ST-44-99 ST-215-97 ST-549-98 Complete set including 64 08 500 the software set, the IR interface cable and an IR interface holder Calibration adapter 64 08 425 to calibrate micropac on gas Service provided: Calibration Calibration by field service Inspection Inspection by field service Renewal of unit ST-49-99 ST-78-99 IR interface cable required for micropacvision (connection: RS 232 9 or 25-pole on IR) 64 08 140 ST-50-99 Datei ST-331-98 5
Dräger Safety AG & Co. KGaA Revalstrasse 1 D-23560 Luebeck Germany Tel. +49 451 882-0 Fax +49 451 882-20 80 www.draeger-safety.com DrägerService Dräger equipment must always be fully operational and safe. DrägerService offers a regular inspection service and isquickly available in the event of malfunction. Your equipment will be repaired and back in operation as quickly as possible. Dräger- Service facilitates the vital flow of information between client and manufacturer. Dräger Expertise Since 1889, Dräger has had an outstanding reputation for solving problems in the field of human breathing. Dräger has been deeply involved in the handling of gases, in particular hazard protection and the saving of life in medical and industrial emergencies. Many of the company's 9400 employees are active in research and innovation to ensure that the latest techniques and scientific advances are fully tested before their inclusion in new equipment. Quality and Environmental Management Our mission includes the continuous improvement of our Quality and Environmental Management Systems in accordance with ISO 9001 and ISO 14001. Dräger Worldwide The Dräger sales and service organisation is spread throughout the world. It comprises more than 25 subsidiaries and associated companies to ensure that Dräger is always within easy reach of its clients and in close contact with all important markets. Dräger's ever increasing market share demonstrates the company's international competitiveness and strength. Dräger has subsidiaries in the following countries: Australia, Austria, Belgium, Bulgaria, Canada, China, Croatia, Czech Republic, Denmark, France, Great Britain, Hungary, Indonesia, Italy, Japan, the Netherlands, Norway, Romania, Singapore, South Korea, Slovenia, Slowakia, South Africa, Spain, Sweden, Switzerland, Thailand, Yugoslavia, USA. Additionally, Dräger is widely represented in Central and South America, Africa, the Middle East, the Far East and Eastern Europe. 90 44 252 / PB e / 012 / H-DD / Market communications ST / Printed in Germany / Chlorine free - ecological / Subject to modifications!