Feel the difference! Experience the real Comfort TECHNOLOGY l ll How you ike it When you ike it Where you ike it C US ULTIMATE COOLING & HEATING SOLUTION
What Klimaire brings you... We have been in Ductless mini split business since 1989 and at Klimaire maintain the highest quality and reliability with ISO 9001 and ISO 14001 standards in our manufacturing facilities. Our products have proven their endurance and resiliency over time operating in 70 different countries since then. All products are ETL certified and AHRI registered. Klimaire products exceed industry standards for energy efficiency and employs innovative technology to achieve the highest customer satisfaction. Since our goal is to achieve maximum customer satisfaction, we continuously seek to achieve in the design phase of our future units higher performance levels. Ductless mini split system are one of the fastest growing products in the US and popularity is rapidly increasing. They allow air conditioning and heating systems to be added quickly, economically and conveniently. often for some applications where installing comfort systems didn't seem possible or practical. Flexibility is the main role of their popularity. Klimaire ductless systems are simple, reliable, and easy to install as well as affordable.klimaire slim single zone and multi zone ductless systems offer built-in solution with duct free technology benefits. These systems are integrated with innovative inverter technology providing individual comfort and control. We are committed to bring you real comfort with our L series to our valuable customers where you Like it, when you Like it and how you Like it. Ductless Mini- Split Experience the true individual comfort Ductless mini-split systems are perfect solution to variety of installation challenges, allowing installers the ability to place Ductless mini split units in locations that were previously impractical or impossible. They are ideal when additional ductwork is necessary but not cost effectively. Basically Ductless mini-split units eliminate the use of ductwork. Since they consist of two parts- the outdoor portion and the indoor portion similar to regular split units but smaller in size, they are known as Ductless mini-split systems. The two units are connected to each other by means of refrigerant and electrical lines. They run together with condensate drain line through a small hole in an exterior wall generally 3 inch in diameter or less. In addition to eliminating the need for ducting one of the other great advantages of ductless mini-split systems is true zone control. The indoor fan coil unit is dedicated to the room being conditioned allowing a temperature and humidity level to be kept different from the rest of the house or the building.
Be the One to make the Smart Choice The US Department of Energy (DOE) says that as much as half of the energy used in your home goes to heating and cooling. So making smart decisions about your home's heating, ventilating, and air conditioning (HVAC) system can have a big effect on your utility bills - and your comfort. Klimaire INVERTECH (use el logo) DC Inverter - driven ductless air conditioners and heat pumps can save you up to 33% in your power utility bill when compare with room air conditioners or standard efficiency 10 SEER ductless systems. Even up to 30% energy consumption savings can be achieved when ductless Invertech units are practical to install and preferred over traditional ducted central units. Total savings can reach up to 60% when the two options are combined. 29% 17% 11% 4% 12% 13% 14% Heating Cooling Water Heating Appliances (includes refrigerator, dishwasher, clothes washer and dryer) Lighting Electronics (includes computer and monitor and TV and DVD player) Other* (includes external power adapters, telephony, set-top boxes, ceiling fans, vent fans and home audio) Inverter Technology: DC Inverter is a type of power conversion circuit that electronically regulates the voltage, current and frequency of a compressor or a motor. DC INVERTER-driven air conditioners and heat pumps bear special double cam, twin rotary variable speed compressor. Like a cruise control of a vehicle. Inverter technology varies the compressor speed based on cooling and heating needs in the space. Variable speed enables to precisely match system capacity to actual load. They can slow down or speed up based on demand load. By varying the speed of the compressor; systems are able to better match load in heating and cooling. Therefore systems operate more efficiently at light load, while still being capable of increasing the speed to deliver full capacity when needed. Since Humidity is a major factor for comfort, in the summer, Klimaire DC INVERTER driven variable speed compressors reduces capacity to match lighter loads increasing the run time to remove moisture and reduce relative humidity resulting in improved comfort. In the winter, by increasing the speed of the compressor Klimaire air conditioner and heat pump systems are able to maintain capacity and deliver hotter supply air even at low outdoor ambient conditions. Room temperature 77ºF Humidity 50% COMFORTABLE Decreasing humidity while maintaining the temperature increases comfort Room temperature 77ºF Humidity 80% UNCOMFORTABLE Hot and stuffy with high humidity Advanced Klimaire 180 Degrees Inverter Technology Klimaire Invertech DC inverter -driven air conditioners and heat pumps are the ultimate cooling and heating technology of the HVAC field. Klimaire DC Inverter Technology adopts the new advanced 180 Sine Wave DC inverter Driven Technology and brushless DC (BLDC) motor (Variable Revolution) Twin cam compressor. This translates into more energy-savings and quieter operation than 120 Square- Wave DC inverter types. Result is more consistent temperature which translates into increased comfort and energy savings all year round.
Room Temperature T2 < T1 Room temperature cool down to setting temperature in shorter time Fixed Speed System DC Inverter System DC Inverter 180 Sine Wave Too Hot 1-Wider frequency & voltage range Setting Temp. Comfortable 2-More Efficient & higher savings 3-Lower noise & reduced vibration for longer life 4-Improved reliable operation Time Too Cold T2 T1 Savings and advantages are even much more when you compare with traditional systems. They run at fixed speed and cycle on/off to match the load. This will result compressor to draw tremendous energy each time when it starts up. On/off cycling also reduces the life-span of the compressor and other components that cycle on/off. Power Consumption (Current) Fixed Speed System DC Inverter System Time Eccentric Load A high performance double cam twin rotary compressor increases the performance, reliability, and durability. Energy savings are much higher with this INVERTECH DC INVERTER - driven variable speed compressor. The opposite double blade advanced design provides mechanical stability and less vibration in the compressor that shall increase the life of compressor and other components in the outdoor unit. Homeowners and neighbors enjoy quiet whisper breeze outdoor unit operation making sure nobody is disturbed. Temperature Fluctuation - INVERTECH System vs. On/off System The temperature fluctuations are much higher in traditional (on/off cycling) systems compare to invertech driven inverter systems, which effects human comfort Real comfort does not only depend on temperature. Dehumidification process, especially during hot sticky weather is essential and integral part of cooling and inverters are the more efficient way to remove moisture and control humidity level.
Ductless Mini-split A Real Solution Ductless mini-split systems are a real cost efficient, flexible, quiet and attractive solution to provide a smart, peaceful alternative to both window and central air conditioners, for locations where no duct is available, in residential, offices, or commercial buildings, new or existing, and additions. Noise Level db(a) Level 140 Jet Engine at 100 105 Power Tools 70 Normal Conversation from 3-5 35 Whisper Quiet Library Klimaire KSIL Unit 0 Weakest Sound Heard Flexible and Quiet Like regular split air conditioning or heat pump systems, the condensing unit is installed outdoors allowing a peaceful and more comfortable interior environment.
Remote Control Mode Setting AUTO / COOL / DRY / HEAT Temperature Setting Swing Fan Speed Setting FAN / HIGH / MED / LOW Sleep ON / OFF Reset Pinhole Timer On Lock Pinhole Timer Off Air Direction LED Display Turbo Swing - Distributes cool/warm air to a maximum area by moving flaps automatically. Sleep - Enables the air conditioner to automatically increase (cooling) or decrease (heating) 1.8 ºF / hour for the first two hours, then keep it steady for the next 5 hours, after that will turn off. This function maintains both energy savings and comfort in night operation Air Direction - Due to density of cold and warm air is different, in cooling mode indoor unit blows air horizontally, while in heating mode blows it vertically, to make room temperature more consistent and comfortable during the operation. Timer - The timer can be set to start ON and stop OFF at any point in a 24 hour operation Turbo - The air conditioner will maximize the output of cooling or heating operation, make the room cool down or heat up rapidly, and attain the desired temperature in the shortest time TEMP - Sets the room temperature up or down 1º F at a time.
Applications are endless... Ductless Mini-splits have flexibility to fit virtually many applications Homes utilizes hydronic heat Remote Utility transfer stations Residential additions such as a Florida room Restaurants, Barber shops, sun room, bed room or garage conversions Computer rooms(different Historic homes temperature/humidity control is required Vacation homes or cabins ATMs and photo studios Remote offices such as inside a warehouse factory Class rooms, indoor nurseries Shopping malls Nursing homes hospitals & church sanctuaries Arena sky boxes Smart Heating & Cooling It is highly recomendable to replace your inefficient old room air conditioner with quieter, more efficient, super high efficiency ductless mini split System. Indoor Climate Changer Indoor nurseries & plant growers can easily achieve the desired temperature and control hummidity levels in differenzt zones. Auxiliary Cooling When aditional cooling is on demand ductless mini split systems can be added quickly, conveniently economically Individual Comfort & Temperature Control 73 70 Create your own true zone cooling & heating to achieve more precise individual 71 74 69 68 comfort day and night in your home or business. Klimaire units zoning capability allows you to set each zone with different temperature settings as desired. You can even turn off the units in the non-occupied rooms for additional energy savings, while you can keep them at higher temperature setting in cooling to control humidity levels increasing personal comfort. EZ application Without replacing or utilizing inefficiently your existing central system consider to eliminate installing expensive and difficult ductwork for residential additions. Condition the storage Heating and cooling your garage helps to maintain low humidity and prevents mildew and keep reasonable winter temperatures. Your stored goods are in perfect conditions for years.
Advantages of Ductless Mini-split System Ultra High Efficiency Units are designed up to 19 SEER (seasonal energy efficiency ratio) and 9.6 HSPF (heating seasonal performance factor) ratings that exceed government standards. Klimaire's INVERTECH advanced inverter technology makes it possible to save energy four seasons all year around for cooling and heating.since these units are directly serves area being conditioned with duct free design technology that eliminates lengthy air travels and air leakage in duct. I f the ducts are not sealed tight or in an unconditioned space such as an attic or crawler space the losses can easily be more than 30% of energy consumption. For a homeowner this transla to decrease in utility bills. Sleek Design- High wall models, a low profile indoor unit in natural offwhite color to blend with any décor in home and /or in business. Easy installation Experience the true individual comfort It is simple to install Klimaire indoor units like hanging a picture frame on the wall. All you need is to make a small hole not larger than 3 inches in diameter to in an exterior wall run the refrigerant lines and electrical wires to connect to your outdoor unit as well as the condensate drain line. Most of the cases this hole is made on an exterior wall. Since there is a single electric power entry connected to the outdoor unit only it requires much less labor and reduces installation time.al outdoor unit wall brackets are contractors easy solution to Burglar free On the contrary of a window air conditioner, with ductless air conditioners systems there are no wall openings so that access cannot be gained. L SERIES
Energy Savings Reduction of up to 60% in energy consumption can be achieved in comparison to 10 SEER units, which will reduce the utility bill. Quieter operation It is less noisy than a self contained window unit,or a packaged terminal unit (PTAC / PTHP), or a central unit. A ductless split system is ultra-quiet because it does not have to push conditioned air through many feet of ductwork, and the nosier outdoor portion of the system operates outdoors. Comfort A true zone temperature control optimizes your comfort. Even a single-zone or a multi-zone Klimaire INVERTECH advanced DC Inverter technology provides maximum comfort for the entire space by individual temperature and humidity control. By utilizing inverter technology temperature and humidity fluctuations are minimized, this state-of-the-art electronic climate control also changes the louver direction swings air, to create uniform ambient conditions. When the selected temperature is reached an inverter system runs almost constantly at low economy speed to maintain desired comfort level controlling humidity which is considered vital for comfort. Powerful By means of a microprocessor Inverter Technology senses the indoor air temperature of the space being cooled or heated and adjusts the speed of the compressor to run at higher speed to meet the demand and quickly reach the set temperature, then slows down to lower rotation speed to maintain it. Convenient Excellent for remodeling older homes, convenient for retrofitting, vacation homes, cabins, classrooms, churches, nursing homes, restaurants, computer rooms, sun rooms, ATMs, office lobbies and remote offices. Environmentally Friendly Our units use environmentally friendly R-410A refrigerant designed to prevent the depletion of the ozone layer. Our super high efficiency products contribute to reduce fossil fuel consumption and limit air pollution.
Comfort Features TECHNOLOGY Respected for its reliability Desired for its all season performance Turbo mode To bring the room quickly to the desired temperature the air conditioner maximizes the cooling or heating output capacity by operating the fan at very high speed to attain the set temperature in the shortest time. Sleep mode On this function the unit automatically adjusts the temperature setting by 1.8 ºF per hour for the first two hours, then holds it steady for the next 5 hours and after that it switches off for all-night comfort. Auto-restart & memory function If the power fails no setting will be lost, when the power resumes, the air conditioner will restart with the previous function setting automatically eliminating the need for re-programming. Dry mode The individual dehumidification mode efficiently helps to control humidity level when cooling may not be necessary. Auto level swing Distributes cool/warm air to a maximum area by moving flaps automatically. Air direction Since cold air and warm air density is different, in cooling mode the indoor unit blows air horizontally while vertically in heating mode. This technology makes the room temperature more consistent and comfortable during operation. Low ambient operation Units can operate down to 5 ºF in heating mode Anti-cold Air (Heat pump only) When starting the heating operation, the fan speed is automatically regulated from the lowest level to the pre-set level according to the temperature rising of the evaporator. This function prevents cold air blowing out at the beginning of the operation, avoiding discomfort to the user. Adjustable indoor fan control Changes the fan speed to 3 different settings to accommodate user's needs. It also helps to control humidity level when cooling may not be necessary.
GENERAL SPECIFICATIONS Performer 16 Series KSIL Single Zone 16 SEER - Heat Pump Klimaire Model No. KSIL009-H216 KSIL012-H216 KSIL018-H216 KSIL024-H216 Energy Star No Cooling Capacity Btu/h 9.000 12.000 18.000 23.000 Inverter Cooling Capacity Range Btu/h 5,000-12,800 5,000-16,100 5,800-22,000 9,700-28,300 Heating Capacity Btu/h 10.700 13.000 18.900 23.000 Inverter Heating Capacity Range Btu/h 5,000-13,000 5,000-16,500 5,800-24,000 10,800-29,000 Dehudimification Pts/h 2,114 2,537 3,805 5,285 EER Btu/W.h 12,4 12 12 9,6 SEER Btu/W.h 16 16,6 17 16 HSPF Btu/W.h 9,2 9 8,2 7,8 Indoor Air Flow Volume m3/h 670 880 1150 1150 cfm 395 518 677 677 Indoor Noise Level - Hi/Med/Lo db(a) 40/36/30 43/41/39 49/45/42 49/45/42 Outdoor Noise Level db(a) 52 54 54 56 Power input V / ph / Hz 208-230 / 1 / 60 208-230 / 1 / 60 208-230 / 1 / 60 208-230 / 1 / 60 Amps (Cool) A 4 5 7 11 Amps (Heat) A 4 5 7 11 Minimum Cicuit Amp. A 8 8 14 15 Max. Overc. Protection A 15 15 20 25 Watts (Cool) W 750 1.000 1.500 2.410 Watts (Heat) W 820 1.020 1.580 2.520 No. of Wires Indoor to Outdoor 4 4 4 4 Wire Size # Indoor to outdoor AWG 16 16 16 16 Indoor Unit Dimensions mm 790 x 265 x 198 920 x 292 x 223 998 x 322 x 240 998 x 322 x 240 (W*D*H) in 31"-1/8 x 10"-7/16 x 7"-13/16 36"-1/4 x 11"-1/2 x 8"-3/4 39"-5/16 x 12"-11 /16 x 9"-7/16 39"-5/16 x 12"-11 /16 x 9"-7/16 Indoor Unit Packing mm 875 x 335 x 265 1015 x 368 x 295 1080 x 320 x 400 1080 x 320 x 400 Dimensions (W*D*H) in 34"-7/8 x 13"-3/16 x 10"-7/16 39"-15/16 x 14"-1/2 x 11"-5/8 42"-1/2 x 12"-5/8 x 15"-3 /4 42"-1/2 x 12"-5/8 x 15"-3/4 Indoor Unit Net/Gross Weight lb 18 / 22 26 / 33 29 / 38 30 / 36 Outdoor Unit Dimensions mm 760 590 285 760 590 285 845 695 335 895 860 330 (W*D*H) in 29"-15/16 23"-1/4 11"-1/4 29"-15/16 23"-1/4 11"-1/4 33"-1/4 27"-3/8 13"-3/16 33"-1/4 27"-3/8 13"-3/16 Outdoor Unit Packing mm 887 x 645 x 355 887 x 645 x 355 965 x 755 x 395 965 x 755 x 395 Dimensions (W*D*H) in 34"-15/16 25"-13/16 14" 34"-15/16 25"-13/16 14" 38" 29"-3/4 15"-9/16 38" 29"-3/4 15"-9/16 Outdoor Unit Net / Gross Weight lb 84 / 90 88 / 93 110 / 120 109 / 116 Refrigerant Gas Type R-410A R-410A R-410A R-410A Charge Amount oz / g Refrigerant connections Flare Flare Flare Flare Piping size - Liquid mm (in) Ф6.35(1/4") Ф6.35(1/4") Ф9.53(3/8") Ф9.53(3/8") Gas mm (in) Ф9.53(3/8") Ф12.7(1/2") Ф16(5/8") Ф16(5/8") Design Pressure psig 550/340 PSIG 550/340 PSIG 550/340 PSIG 550/340 PSIG Max. Line Run 1 ft 66 66 82 82 Max. Elevation difference 2 ft 26 26 33 33 Indoor Unit Air Circulation cfm 394 518 676 676 Fan Speeds H / M / L 1200/940/800 1200/940/800 1285 / 1245 / 1040 1285 / 1245 / 1040 Temp. Setting Range On Remote 62º F - 88º F Low Ambient Operation (cooling/heating) 4 ºF 5~122/5~93.2 5~122/5~93.2 5~122/5~93.2 5~122/5~93.2 Noise level indoor (H/M/L) db(a) 40/36/30 44/41/39 50/45/42 49/45/42 Noise level outdoor db(a) 55 54 59 60 Applicable Area Sq.Ft. 350-400 450-550 700-1000 1100-1400 Follow me Turbo Mode Anto-restart LCD display Auto level swing Active Carbon Golden Fin Vitamin C Filter Bio Filter Sliver Ion Filter Finger Guard net Timer 24 24 24 24 Dimensions KSIL030-H216 KSIL036-H215 No No 30.000 36.000 12,650-36,150 15,180-43,370 30.000 36.000 14,100-37,800 16,900-45,390 6,342 8,033 10 9,5 16 14,5 9,6 9 1600 1600 942 942 50/48/46 50/48/46 59 59 208-230 / 1 / 60 208-230 / 1 / 60 13 16,0 11 16,0 16 20 25 30 3.000 3.800 2.500 3.450 4 4 16 16 1445 x 340 x 277 1445 x 340 x 277 56"-7/8 x 13"-3 /8 x 10"-7 /8 56"-7/8 x 13"-3 /8 x 10"-7 /8 1530 x 365 x 420 1530 x 365 x 420 60"-1/4 x 14"-3/8 x 16"-9/16 60"-1/4 x 14"-3/8 x 16"-9/16 53 / 71 53 / 71 895 860 330 990 x 965 x 345 35"-1/4 33"-1/4 13" 39" x 38" x 13"-9/16 1043 x 915 x 395 1120 x 1100 x 435 41"-1/16 36" 15"-9/16 44"-1/8 x 43"-5/16 x 17"-1/8 157 / 165 181 / 190 R-410A R-410A Flare Flare Ф9.53(3/8") Ф9.53(3/8") Ф16(5/8") Ф16(5/8") 550/340 PSIG 550/340 PSIG 82 98 33 49 971 971 1260 / 1090 / 950 1260 / 1090 / 950 5~122/5~93.2 5~122/5~93.2 50/47/43 50/46/42 59 65 1400-1900 1900-2500 24 24 Continued product improvement is our goal at Klimaire Products, Inc. Hence, specifications and data listed herein are subject to change without notice and without obligation on our part. Allways comply with local, state, and national electrical codes. 1 - Minimum 10 ft line set recommended. 2 - Outdoor unit being elevated than the indoor unit oil trap should be installed every 17 ft to 23 ft ( 5 to 7 m) 3 - Factory installed only, not field option 4 - Units may operate in heating mode until the ambient conditions reach 5º F H H L D L D
GENERAL SPECIFICATIONS Performer 19 Series KSIL Single Zone 19 SEER - Heat Pump C US Klimaire Model No. KSIL009-H119 KSIL012-H119 KSIL012-H219 KSIL018-H219 Energy Star Cooling Capacity Btu/h 9.000 12.000 12.000 18.000 Inverter Cooling Capacity Range Btu/h 5,000-12,800 5,000-16,100 5,000-16,100 5,800-22,000 Heating Capacity Btu/h 10.000 12.500 13.000 19.000 Inverter Heating Capacity Range Btu/h 5,000-13,000 5,000-16,500 5,000-16,500 5,800-24,000 Dehudimification Pts/h 2,11 2,54 2,54 3,81 EER Btu/W.h 14 12,5 12,5 12,5 SEER Btu/W.h 19 18,8 18,8 19,2 HSPF Btu/W.h 9,6 9,6 9,3 9,6 Indoor Air Flow Volume m3/h 750 800 850 1150 cfm 440 470 500 675 Indoor Noise Level - Hi/Med/Lo db(a) 39/35/32 40/38/35 41/37/34 48/40/36 Outdoor Noise Level db(a) 53 53 54 54 Power input V / ph / Hz 115 / 1 / 60 115 / 1 / 60 230 / 1 / 60 230 / 1 / 60 Amps (Cool) A 6,0 9,6 5,0 7 Amps (Heat) A 7 12,5 6,0 7 Minimum Cicuit Amp. A 15 17 8 13 Max. Overc. Protection A 25 30 15 20 Watts (Cool) W 650 1060 1000 1460 Watts (Heat) W 790 1440 1250 1470 No. of Wires Indoor to Outdoor 4 4 4 4 Wire Size # Indoor to outdoor AWG 16 16 16 16 Indoor Unit Dimensions mm 920x292x223 920x292x223 920x292x223 998x322x240 (W*D*H) in 36"-1/4 x 11"-1/2 x 8"-3/4 36"-1/4 x 11"-1/2 x 8"-3/4 36"-1/4 x 11"-1/2 x 8"-3/4 39"-5/16 x 12"-11 /16 x 9"-7/16 Indoor Unit Packing mm 1015 x 368 x 295 1015 x 368 x 295 1015 x 368 x 295 1080x320x400 Dimensions (W*D*H) in 39"-15/16 x 14"-1/2 x 11"-5/8 39"-15/16 x 14"-1/2 x 11"-5/8 39"-15/16 x 14"-1/2 x 11"-5/8 42"-1/2 x 12"-5/8 x 15"-3 /4 Indoor Unit Net/Gross Weight lb 26 / 32 26 / 32 26 / 32 29 / 37 Outdoor Unit Dimensions mm 760 590 285 760 590 285 760 590 285 845 695 335 (W*D*H) in 29"-15/16 23"- 1/4 11"-1/4 29"-15/16 23"- 1/4 11"-1/4 29"-15/16 23"- 1/4 11"-1/4 33"- 1/4 27"-3/8 13"- 3/16 Outdoor Unit Packing mm 887 655 355 887 655 355 887 655 355 965 755 395 Dimensions (W*D*H) in 34"-15/16 25"-13/16 14" 34"-15/16 25"-13/16 14" 34"-15/16 25"-13/16 14" 38" 29"-3/4 15"-9/16 Outdoor Unit Net / Gross Weight lb 83 / 88 83 / 88 88 / 93 105 / 113 Refrigerant Gas Type R-410A R-410A R-410A R-410A Charge Amount g 1600 1600 1600 1750 Refrigerant connections Piping size - Liquid mm (in) Ф6.35 (1/4") Ф6.35 (1/4") Ф6.35 (1/4") Ф9.53 (3/8") Gas mm (in) Ф9.53 (3/8") Ф12.7 (1/2") Ф12.7 (1/2") Ф16 (5/8") Design Pressure psig 550/340 PSIG 550/340 PSIG 550/340 PSIG 550/340 PSIG Max. Line Run 1 ft 66 66 66 82 Max. Elevation difference 2 ft 26 26 26 33 Indoor Unit Air Circulation m3/h 750 750 850 1150 cfm 441 441 500 676 Fan Speeds H / M / L 1150 / 1000 / 850 1050 / 1000 / 940 1200 / 940 / 800 1285 / 1245 / 1040 Temp. Setting Range On remote 62º F - 88º F Low Ambient Operation (cooling/heating) 4 ºF 5~122/5~93.2 5~122/5~93.2 5~122/5~93.2 5~122/5~93.2 Noise level indoor (H/M/L) db(a) 39/35/32 39/38/37 41/37/34 48/44/42 Noise level outdoor db(a) 53 55 55 59 Applicable Area Sq.Ft. 350-400 450-550 450-550 700-1000 Follow me Turbo Mode Anto-restart LCD display Auto level swing Active Carbon Golden Fin Vitamin C Filter Bio Filter Sliver Ion Filter Finger Guard net Timer 24 24 24 24 KSIL024-H219 24.000 9,700-28,300 24.000 10,800-29,000 5,50 12,5 18 9,6 1600 940 50/48/46 59 230 / 1 / 60 9,1 9,0 15 25 2100 1980 4 16 1445x340x277 56"-7/8 x 13"-3 /8 x 10"-7 /8 1530x365x420 60"-1/4 x 14"-3/8 x 16"-9/16 58 / 71 895 860 330 35"-1/ 4 33"-7/8 13" 1043 915 395 41 "-1/16 36" 15"- 9/16 159 / 168 R-410A 2540 Ф9.53 (3/8") Ф16 (5/8") 550/340 PSIG 82 33 1600 941 1260 / 1090 / 950 5~122/5~93.2 51/48/45 59 1100-1400 24 Continued product improvement is our goal at Klimaire Products, Inc. Hence, specifications and data listed herein are subject to change without notice and without obligation on our part. Allways comply with local, state, and national electrical codes. 1 - Minimum 10 ft line set recommended. 2 - Outdoor unit being elevated than the indoor unit oil trap should be installed every 17 ft to 23 ft ( 5 to 7 m) 3 - Factory installed only, not field option 4 - Units may operate in heating mode until the ambient conditions reach 5º F Dimensions H H L D L D
TECHNOLOGY L SERIES 5 Year 5Warranty on Compressor 1 Year Warranty on Parts 2190 NW 89 Place Doral, FL 33172 USA Tel: (305)594-4972 - Fax (305) 675-2212 www.klimaire.com - sales@klimaire.com