LivaNova Neuromodulation. Symbols and Definitions

Similar documents
5.1.1 Manufacturer The date of manufacture, as well as the name and address of the manufacturer, can be combined in one symbol.

ShockLink. Important Product Information.

Robotic Mowers (battery powered and charging station connected to electric mains or low voltage supply)

Platelet Agitator Operation Manual

HT4700 Heating Jacket Instruction Manual

ISO INTERNATIONAL STANDARD

1 Intended Use of the Breas HA 01 Humidifier

C 183/10 Official Journal of the European Union

CareTemp Touch Free Thermometer. Directions for use

Part 2-55: Medical electrical equipment. Particular requirements for the basic safety and essential performance of respiratory gas monitors

General Alarm System. User Manual. Protec Fire Detection plc, Protec House, Churchill Way, Nelson, Lancashire, BB9 6RT, ENGLAND

ISO 7010 INTERNATIONAL STANDARD. Graphical symbols Safety colours and safety signs Safety signs used in workplaces and public areas AMENDMENT 1

safety & regulatory information

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2015/C 014/04)

THE MEDIX Actineb. Technical Specifications. % Particles < 5 um 75% * Class II BF. Intermittent (use for 60 Type Rating

ISO 7439 INTERNATIONAL STANDARD. Copper-bearing intra-uterine contraceptive devices Requirements, tests

The Blood Pressure Monitor is digital upper arm monitors intended for use in measuring blood pressure and heartbeat rate with upper arm circumference

Chain saws (electric mains powered and battery powered)

Council Directive 93/68/EEC of 22 July 1993 amending Directives

Garden blowers, vacuums and blower/vacuums (electric mains powered)

U S E R M A N U A L. Portable Oxygen Concentrator SAVE THESE INSTRUCTIONS

Little Anne. Important Product Information

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2017/C 389/02)

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 173/02)

- ibidi heating system - stage top incubator for life cell imaging

RADAR REFLECTOR STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:

Medical devices and electromagnetic compatibility. Addressing the requirements of IEC , 4 th Edition

Lawn trimmers and lawn edge trimmers (hand held electric mains powered)

Forehead Thermometer Instruction Manual

ISO INTERNATIONAL STANDARD. Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels

Four channel video link For low cost video transmission

Non-Touch Thermometer. User Manual. ARC Devices Ltd.

Important Safety Notice

(Notices) EUROPEAN COMMISSION

Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -

best practice guide BS EN 14846: 2008 Electromechanically operated locks & striking plates to in association with

3M Benchtop Air Ionizer 963E. User s Guide

INTERNATIONAL STANDARD

NON-TOUCH THERMOMETER User Manual

v.a.c.simplicity TM Quick Reference Guide Power Connection Canister Battery Charging Light Control Panel

Operation and Maintenance Manual

OFFICIAL JOURNAL OF ACTIVE IMPLANTABLE MEDICAL DEVICES DIRECTIVE (90/385/EEC)

USER GUIDE. Paperless Humidity/Temperature Chart Recorder. Model RH520A 21.2 C 13:

Lawnmowers (pedestrian controlled electric mains-powered)

BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY

Infrared Thermometer

Digital Heat Block User Manual

Corning LSE Digital Dry Bath Heater

Remote alarm case VENTIremote alarm 10 m WM VENTIremote alarm 30 m WM Device description and instructions for use

U S E R M A N U A L. Model: PM5900 SAVE THESE INSTRUCTIONS

Undercounter Refrigerator Operation Manual

This is a preview - click here to buy the full publication

(Notices) EUROPEAN COMMISSION

Lawnmowers (pedestrian controlled, battery powered)

AD SP. Air Dryer Maintenance Manual. Innovation with Integrity. Version 001 NMR

Biological evaluation of medical devices

Lc~rlI. z - 510(k) Summary JUL

Technical Bulletin CE marking: from 1st July 2013

Bose Virtually Invisible 891 and 691 in-wall speakers

Kinsa Smart Ear ThermometerTM Instructions For Use

ISO INTERNATIONAL STANDARD. Clothing for protection against infectious agents Test method for resistance to dry microbial penetration

MARINE GYRO COMPASS STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:

LifeTag System Operation Guide

USER MANUAL. Model: PM5900. SAVE THESE INSTRUCTIONS (For latest revision, go to

X99 Series. Dental Handpiece. Instruction For Use

Quick Touch Pendant User Guide

AUGUST 2016 CONTENTS:

ESSENTIAL REQUIREMENTS CHECK LIST

Product End-of-Life Disassembly Instructions

EN ISO ÖNORM. Edition: (ISO 14937:2009)

ISO INTERNATIONAL STANDARD

COMPILATION OF COMMUNITY PROCEDURES ON INSPECTIONS AND EXCHANGE OF INFORMATION

WIRELESS THERMO-HYGROMETER Instructions manual Cat. No. WS9070IT+

GE Healthcare. Mixer M-925. Instructions

Service package PDAD- -SP (en) Assembly instructions d [ ]

*smith&nephew VERSAJET HYDROSURGERY SYSTEM

Medicontrol itcp Intelligent Theatre Control Panels

Polar WearLink + Coded Transmitter 31 Coded Transmitter W.I.N.D. User Manual

(1135/2016) Translation from Finnish Legally binding only in Finnish and Swedish Ministry of Economic Affairs and Employment, Finland

INTERNATIONAL STANDARD

Operating Instructions

Want to know more about the Notified Body? Everything you need to know to help you through the Notified Body process and on to accreditation.

64 Max IR Thermometer

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2015/C 226/03)

Instructions for use / Alarm unit, Fiber optic cable & Sensor patch ENGLISH

ISO Safety of machinery Laser processing machines Part 1: General safety requirements

Undercounter Refrigerator Operation Manual i.series and Horizon Series

The Impact of Marking Requirements. on Design and Performance of Power Converters and Electrical Drives

62 MAX/62 MAX + Infrared Thermometer. Users Manual

Shipboard incinerators with capacities up to 4000 kw

KFP-CF Series Operation Manual

TR FLEXMAG 4050 C Electromagnetic flow meter for single use processes

New Legal Framework Carlo Casati

This second part of the lesson & is dedicated to EMC legal aspect and standards.

STERILAB Steam sterilizer with gravitation de-aeration (without vacuum pump) for laboratory purposes.

3R, 3G 5R, 5G Point Laser Levels

AD XT. Air Dryer Service Manual. Innovation with Integrity. Version 003 NMR

BIOMEDICAL FREEZERS ULTRA LOW FREEZERS - LABORATORY, PHARMACEUTICAL AND MEDICAL REFRIGERATION

Road vehicles Mopeds Symbols for controls, indicators and tell-tales

ZP2 Series Operation Manual

Transcription:

LivaNova Neuromodulation Symbols and Definitions August 2018 ISO 7000 Graphical Symbols for use on equipment Registered Symbols Caution 0434B Caution is necessary when operating the device or control close to where the symbol is placed, or the current situation needs operator awareness or operator action in order to avoid undesirable consequences. Temperature limit 0632 Maximum and minimum temperature limits at which the item shall be stored, transported or used. Do not re-use 1051 The item is for single use only and must not be used more than once, for example on packages of medical disposables. Operator s manual; operating instructions 1641 The location where the operator's manual is stored or to identify information that relates to the operating instructions. Tie down point 2069 The location on the machine or equipment that is used to tie down or secure the machine or equipment to prevent movement during transport. Batch code 2492 The manufacturer's batch or lot code Tunneler Date of manufacture 2497 The date on which a product was manufactured. [2017: Replaced by IEC 60417-6049 on Cyberonics/LivaNova Neuromodulation products.] Patient Kit Tunneler 1/6 26-0009-9900/1(Worldwide)

Serial number 2498 The manufacturer's serial number. SW + Computer SW + Computer Sterile 2499 The device is provided sterile. Do not use if package is damaged 2606 The device must not be used if the package holding the device is damaged, for example on packaging of medical devices. Use by date 2607 The device should not be used after the date accompanying the symbol, for example on a medical device or its packaging. Patient number 2610 The control or the indicator for the patient number, for example to identify the place where the patient number or identification code is found or can be entered. Humidity limitation ISO 7000 Graphical Symbols for use on equipment Registered Symbols 2620 The acceptable upper and lower limits of relative humidity for transport and storage. Other: Implant Card Non-pyrogenic 2724 The product is non-pyrogenic. All implantable All implantable Packaging unit 2794 The number of pieces in the package. Implantable device Non-standard connector cavity 3045 Implantable device. 3067 A non-standard connector cavity on the [device]. 2/6 26-0009-9900/1(Worldwide)

ISO 7000 Graphical Symbols for use on equipment Registered Symbols Torque wrench for implantable pulse generator 3077 The torque limiting wrench used to connect a lead to the implantable pulse generator. Manufacturer 3082 The manufacturer of a product. This symbol shall be used filled in all applications to differentiate if from ISO 7000-2497. ISO 7001 Graphical Symbols - Public Information Symbols Direction arrow PI PF 030 To indicate direction of movement of people. Healthcare center or doctor PI PF 044 To indicate the location of a facility where healthcare is offered. Other: Implant card Do not throw away ISO 7001 PI PF 027 + ISO 7010 P001 To indicate a receptacle for the acceptance of trash or litter or rubbish being thrown away. General prohibition sign A combined symbol to signify that user should not throw away the material. Other: Implant card IEC 60417 Graphical Symbols for Use on Equipment Battery, general 5001B The power supply by primary or secondary battery. (M201) Positioning of cell 5002 The battery holder itself and to identify the positioning of the cell(s) inside the battery holder [added text also shows negative and battery type]. (M2000), battery compartment Stand-by 5009 The switch or switch position by means of which part of the equipment is switched on in order to bring it into the stand-by condition, and to identify the control to shift to or to indicate the state of low power consumption. Each of different states of power consumption may be indicated using a corresponding color. Type BF applied part 5333 A type BF applied part complying with IEC 60601-1 3/6 26-0009-9900/1(Worldwide)

IEC 60417 Graphical Symbols for Use on Equipment Battery Check 5546 A control to check the condition of a primary or secondary battery or to identify the battery condition indicator. (M2000) Date 5662 The control which sets and indicates the date. Other: Implant card Memory Disk 5884 Cartridge type memory disks [additional memory storage provided] Disc media 5986 Disc media SW+Media (alone) Country of Manufacture + Date of Manufacture 6049 Country of manufacture. Also used to indicate date of manufacture, as permitted in ISO 60417, when placed next to manufacture date. Model Number 6050 To identify the model number or type number of a product. In the application of this symbol, the model number or type number of the product should be accompanied with this symbol. PC 6234 Personal computer Permanentmagnet movingcoil instrument 6267 The instrument which operates by the interaction of the magnetic field due to a current in a movable coil with the field of a fixed permanent magnet. Patient Kit Other Sources Symbol Name Source Number Definition Where Used Prescription Statement 21 CFR 801.109(c) N/A U.S. federal law restricts this device to sale by or on the order of a physician. except investigational products except M220 European Authorized Representative ISO 15223-1 5.1.2 Authorized Representative in the European Community a natural or legal person established in the European Economic Area (EEA, including EU & EFTA) who, explicitly designated by a non-european manufacturer, acts on his behalf in carrying out certain tasks required in the applicable directives. 4/6 26-0009-9900/1(Worldwide)

WEEE EN 50419 N/A Do not dispose to unsorted municipal waste CE Mark 90/385/EEC N/A Indicates conformity with the essential health and safety requirements set out in European Directives MR Conditional ASTM F2503 08 MR Unsafe ASTM F2503 08 N/A N/A ASTM Recommended Icon Associated with an item that has been demonstrated to pose no known hazards in a specified MRI environment with specified conditions of use. ASTM Recommended Icon Associated with the MR UNSAFE ASTM Term except investigational products IGP Other: Implant Card 5/6 26-0009-9900/1(Worldwide)

US LivaNova USA, Inc. 100 Cyberonics Boulevard Houston, Texas 77058 USA +1.281.228.7200 1.800.332.1375 (US/Canada) 24-HOUR SUPPORT 1.866.882.8804 (US/Canada) +1.281.228.7330 (Worldwide) Fax +1.281.218.9332 OUS LivaNova Belgium NV Ikaroslaan 83 B-1930 Zaventem BELGIUM 24-HOUR SUPPORT +1.281.228.7330 (Worldwide) +32.2.720.95.93 Fax +32.2.720.60.53 INTERNET www.livanova.com Copyright 2018 LivaNova, PLC, London, United Kingdom. All rights reserved. LivaNova is a registered United States trademark of LivaNova, PLC. NCP, Demipulse, Demipulse Duo, Perennia, VNS Therapy, VITARIA, AspireHC, PerenniaFLEX, PerenniaDURA, AspireSR and SenTiva are registered United States trademarks of LivaNova USA, Inc. Pulse and Pulse Duo are trademarks of LivaNova USA, Inc. Corresponding foreign trademarks may also be registered or pending. 6/6 26-0009-9900/1(Worldwide)