UNITS UNITS & SYSTEMS AUXILIARY HEATERS...610, 617 WALL MOUNT...573 BUSES School, Shuttle, and Transit...618 CEILING MOUNT...580-584 CONDENSERS & BRACKET KITS...598 EVAPORATOR UNITS...573-584 FACTORY TYPE - IN DASH Drop-In Evaporator Kits...592-595 FILTERS Remote Mount Filters...599 Air Filters - Evaporator...373 FLOOR MOUNT (see Universal)...596 HEATERS Auxiliary...609-617 Electric DC...617 HOSE INSTALLATION KITS...598 PRESSURIZERS / Booster Blower...545 REMOTE MOUNT Condensers...600-602 REMOTE MOUNT FILTERS...599 ROOFTOP MOUNT A/C Units...585-591 Condensers...606-608 UNIVERSAL MOUNT Ceiling, Floor, or Under Dash...592, 596 Fast Finder 10-0026...599 10-0032...599 10-0033...599 10-0080...599 10-0081...599 10-0082...599 10-0085...599 10-0086...599 10-9275...593 10-9335...618 10-9335S...618 10-9343...619 10-9343S...619 10-9350...600 10-9351...600 10-9355...619 10-9355S...619 10-9360...601 10-9361...601 10-9365...602 10-9366...602 10-9367...603 10-9368...603 10-9375...604 10-9376...604 10-9377...605 10-9378...605 10-9382...620 10-9383...620 10-9385...606 10-9386...606 10-9395...607 10-9396...607 10-9398...608 10-9399...608 10-9400...596 10-9401...596 10-9402...596 10-9403...596 10-9410...584 10-9420...577 10-9421...577 10-9422...577 10-9423...577 10-9440...592 10-9450...578 10-9451...578 10-9476...597 10-9477...597 10-9478...597 10-9610...590 10-9611...590 10-9620...591 10-9621...591 10-9710...573 10-9711...573 10-9712...574 10-9713...575 10-9714...575 10-9718...585 10-9719...585 10-9720...586 10-9721...583 10-9722...583 10-9723...595 10-9724...574 10-9725...594 10-9726...594 10-9729...593 10-9730...593 10-9731...587 10-9732...587 10-9733...580 10-9734...580 10-9735...581 10-9736...581 10-9737...581 10-9738...581 10-9739...576 10-9740...576 10-9741...576 10-9742...576 10-9743...579 10-9744...579 10-9745...579 10-9746...579 10-9753...582 10-9754...582 10-9755...588 10-9756...588 10-9777...589 10-9778...589 10-9779...589 10-9780...589 10-9800...609 10-9801...609 10-9802...609 10-9803...609 10-9805...609 10-9806...609 10-9807...609 10-9808...609 10-9815...615 10-9816...615 10-9817...615 10-9818...615 10-9819...615 10-9820...615 10-9821...615 10-9822...616 10-9823...616 10-9824...616 10-9825...616 10-9826...616 10-9828...616 10-9829...616 10-9830...610 10-9831...610 10-9832...610 10-9833...610 10-9834...610 10-9840...610 10-9841...610 10-9842...610 10-9844...616 10-9845...616 10-9846...616 10-9847...616 10-9848...617 10-9849...617 10-9850A...617 10-9851A...617 10-9852A...617 10-9853A...617 10-9854A...617 10-9855A...617 10-9868...612 10-9870...613 10-9872...611 10-9890...614 10-9891...614 10-9925...599 10-9928...599 10-9929...599 10-9936...599 UNITS 572 2013 MEI Corporation
EVAPORATOR UNIT BACKWALL MOUNT FLEETS HEAVY & MEDIUM DUTY TRUCKS INDUSTRIAL AGRICULTURE The 10-9710 sets a new standard in air conditioning technology. It combines performance and styling in a package small enough to fit almost anywhere. In addition, it utilizes engineered resin technology to create a unit that is not only attractive but incredibly durable. The 10-9710 utilizes advanced coil and blower technology to create the highest capacity possible in a wall mounted unit that is no more than 11-1/4 wide. A/C & HEATER UNITS Hose Kit #9850 Engine Compressor Bracket Kit Condenser Condenser Brackets NOTE: Suport Legs sold separately BACKWALL 10-9710...12v 10-9711...24v BACKWALL Air Flow...260 CFM Capacity...Cooling - 17,180 BTU/Hr with 36 F (4,329 kcal/h with 2.2 C) refrigerant temp. and 80 F (26.7 C) wet bulb entering air Current Draw...18 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 9 amps @ 27.2 VDC (includes 2 amps for A/C clutch) Weight...16 lbs. (11 kg) 10-0090 Floor Support Kit 10-0091 Plumbing Covers 10-0092 Recirculation Filter Remote Control Panel RD-2-3674-0 Blower Motor Assembly - 12v...3981 Blower Motor Assembly - 24v...3986 Evaporator...RD-2-4213-0 Expansion Valve...1600 Knob, Rotary Control...71R-4025 Louver...1734 Resistor, Speed Control...1220 Switch, 5 Speed, 5 Term (40 amp)...1311 Thermostatic Switch...1336 2013 MEI Corporation 573
EVAPORATOR UNIT BACKWALL MOUNT FLEETS HEAVY & MEDIUM DUTY TRUCKS INDUSTRIAL AGRICULTURE The 10-9712 blasts ice cold high velocity air where you want it. Multi-directional diffusers are positioned directly over the blower so you get cool air right off the coil in any direction. This compact high-capacity unit easily mounts between the seats to back walls in most class 6-8 conventional cabs. It can also be front dash mounted in some class 6 and 7 vehicles where a flat space permits. The 10-9712 is designed to provide maximum cooling with a minimum of maintenance. The welded steel construction uses only nut plates and is void of troublesome sheetmetal screws. It s unique design which provides access to any components in minutes is a fleet dream and a breath of fresh air to owner operators tired of bruised knuckles under the dash. A backwall/floor support kit option is available for added reinforcement. Hose Kit #9850 Engine Compressor Bracket Kit Condenser Condenser Brackets BACKWALL 10-9712...12v 10-9724...24v NOTE: Suport Legs sold separately BACKWALL Air Flow...260 CFM Capacity...Cooling - 17,180 BTU/Hr with 36 F (4,329 kcal/h with 2.2 C) refrigerant temp. and 80 F (26.7 C) wet bulb entering air Current Draw...18 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 9 amps @ 27.2 VDC (includes 2 amps for A/C clutch) Weight...25 lbs. (11 kg) 10-0001 Floor Support Kit 10-0002 Recirculation Filter Blower Motor - 12v...3402 Blower Motor - 24v...3373 Blower Wheel...3750 Control Panel Assm. (fixed)...rd-2-1487-1 Control Panel Assm. (variable)...rd-2-1487-0 Drain Hose...8528 Evaporator...6507 Expansion Valve (R134a)...1600 Knob...1271 Louver (top) (2)...1720 Louver (bottom) (2)...1738 Resistor...1220 Switch, ON-OFF-ON...1060 Thermostatic Sw. (preset 24 cap.)...1332 Thermostatic Sw. (rotary 36 cap.)...1336 574 2013 2011 MEI Chad/Preston Corporation
A/C UNIT WALL MOUNT CONSTRUCTION MINING AGRICULTURAL Hose Kit #9850 Engine Compressor Bracket Kit Condenser Condenser Brackets FEATURES Welded Steel Construction 360 Adjustable Air Outlets Variable Speed Blower Switch Heavy Duty Permanent Magnet Motor Mounts Easily Between Seats or On Back Wall of Conventional Trucks Proven Reliable Performance BACKWALL 10-9713...12v 10-9714...24v Air Flow...285 SCFM Performance...17,500 BTU/h Max.Power Required...12 amps @ 12v DC 6 amps @ 24v DC Weight...29 lbs. 250 mm 9.8 348 mm 13.7 413 mm 16.3 BACKWALL 174 mm 235 mm 9.3 Blower Motor - 12v...3385 Blower Motor - 24v...3240 Blower Wheel (2)...call Evaporator...6550 Expansion Valve...1600 Knob (2)...1275 Louver - Rectangle (1)...1747 Louver Assembly - Round(4)...1705 Resistor 12v...1230 Switch, 3 speed...1151 Thermostatic Switch...1336 2013 MEI Corporation 575
EVAPORATOR UNIT BACKWALL MOUNT (with Heat Option) CONSTRUCTION MINING AGRICULTURAL With the emergence of smaller cabs comes the demand for systems that deliver paramount performance while requiring minimum space. The versatility of the 10-9739 allows the air plenum to be changed to divert the air out the top or the front of the unit depending on the application. In addition, the controls can be remote mounted. Utilizing quality components throughout, this unit promises to provide hassle free maintenance and exemplary performance. Hose Kit #9850 Engine Compressor Bracket Kit Condenser Condenser Brackets BACKWALL 10-9739...Heater/Air Conditioner - 12v 10-9740...Heater/Air Conditioner - 24v 10-9741...Air Conditioner Only - 12v 10-9742...Air Conditioner Only - 24v BACKWALL Air Flow...205 CFM (348 m 3 /h) Capacity...Heating - 22,000 BTU/Hr @ 100 F (5,544 kcal/h @ 37.8 C Cooling - 15,200 BTU/Hr @ 36 F (3,840 kcal/h @ 2.2 C) Current Draw...13.5 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 6.75 amps @ 27.2 VDC (includes 2 amps for A/C clutch) Weight...24 lbs. (11 kg) 10-0017 Plenum Assembly 10-0023 Duct Kit Control Panel A/C only...rd3-6100-0 A/C - Heat...RD3-6082-0 Blower Motor Assembly - 12v...3982 Blower Motor Assembly - 24v...RD-3-6062-1 Blower Wheel (2)...3715 Circuit Breaker, 15 amp - 24v...1211 Circuit Breaker, 30 amp - 12v...1210 Evaporator...76R-5030 Expansion Valve...1600 Filter (Recirculation)...10-9914 Heater Core...76R-1030 Louver (rectangle) (2)...1739 Louver (round) (3)...1738 Relay - 12v...1263 Relay - 24v...1264 Switch (Heat-A/C)...1060 Switch, (A/C Only)...1020 Switch, Fan...1028 Thermostatic Switch...1332 576 2013 MEI Corporation
evaporator unit BACKWALL mount ARMORED CARS AID CARS PERSONNEL CARRIERS OFF ROAD CABS The 10-9420 is an ideal unit for armored car applications because the system can direct heated or cooled air to both front and rear compartments through multi-directional louvers. The tremendous capacity of this unit also makes it ideal for aid car, delivery truck or large box applications. The 10-9420 also offers simple service and an evaporator filter. A/C & HEATER UNITS Hose Kit #9850 Engine Compressor Bracket Kit Condenser Condenser Brackets BACKWALL 10-9420...Rear Exhaust - 12v 10-9421...Rear Exhaust - 24v 10-9422...Fresh Air Intake - 12v 10-9423...Fresh Air Intake - 24v Air Flow...430 CFM (348 m 3 /h) 21.0 in. (53.3 cm) 18.8 in. (47.8 cm) Rear Air Exhaust (10-9420 Only) BACKWALL Capacity...Heating - 46,000 BTU/Hr @ 150 F (11,592 kcal/h @ 66 C) Cooling - 33,000 BTU/Hr @ 36 F (8,316 kcal/h @ 2.2 C) Current Draw...22 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 11.2 amps @ 27.2 VDC (Includes 2 amps for A/C clutch) 11.8 in. (30 cm) 26.8 in. (68.1 cm) Weight...47 lbs. (11 kg) 8.3 in. (22 cm) 9.2 in. (23.4 cm) Fresh Air Intake (10-9422 Only) 10-0032...12 volt 10-0033...24 volt Inline Booster Pressurizer Louver Assembly (rear) RD3-3133-0 Blower Assembly - 12v...RD-3-2547-0 Blower Assembly - 24v...RD-3-2547-1 Blower Wheel (2)...3750 Control Cable (2)...72R-7290 Control Panel Assembly...1719 Evaporator...76R-7070 Expansion Valve...1600 Filter (air)...9940 Heater Core...76R-3500 Heater Valve...2210 Knob (cable) (2)...1272 Knob (control) (1)...1271 Louver, round (4)...RD5-5223-2 Motor 12v...3322 Motor 24v...3472 Reisistor...1220 Switch 3 speed (a/c only)...1150 Switch, Toggle (4 terminal)...1028 Switch, Toggle (6 terminal)...1060 Thermostatic Switch (2)...1336 2013 MEI Corporation 577
evaporator Unit BACKWALL mount CONSTRUCTION MINING AGRICULTURAL The 10-9450 is a beefed up unit with a heavy duty all metal housing designed for off road applications. Designed specifically for high capacity applications, this unit also offers fresh air intake and can be pressurized. Hose Kit #9850 Engine Compressor Bracket Kit Condenser Condenser Brackets BACKWALL 10-9450...12v 10-9451... 24v 27.4 in. (69.7 cm) BACKWALL Air Flow...430 CFM (348 m 3 /h) Capacity...Heating - 46,000 BTU/Hr @ 150 F (11,592 kcal/h @ 66 C) Cooling - 33,000 BTU/Hr @ 36 F (8,316 kcal/h @ 2.2 C) Current Draw...21.8 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 10.9 amps @ 27.2 VDC (Includes 2 amps for A/C clutch) 20.1 in. (51.1 cm) 20.8 in. (52.9 cm) 7.0 in. (7.6 cm) 2.7 in. (6.8 cm) 8.7 in. (22.0 cm) Weight...47 lbs. (11 kg) 10-0032...12 volt 10-0033...24 volt Inline Booster Pressurizer 9916 Fresh Air Intake (replacement filter) 10-9918 Fresh Air Intake Filter Blower Assembly - 12v...RD-3-2547-0 Blower Assembly - 24v...RD-3-2547-1 Blower Wheel...3750 Evaporator...76R-7070 Expansion Valve...1600 Filter (recirculation)...10-9912 Heater Core...76R-3500 Heater Valve, cable operated...2283 Knob (control)...1289 Louver (4)...1719 Motor - 12v...3322 Motor - 24v...3472 Resistor Speed Control...1220 Rotary Actuator Assembly...RD5-8152-27.8 Switch, OFF-ON-ON 12v...1109 Switch, OFF-ON-ON 24v...1110 Switch, Rocker, Fan ON-ON-ON... 1111 Termostatic Switch...1331 578 2013 MEI Corporation
EVAPORATOR UNIT BACKWALL MOUNT (with Heat Option) CONSTRUCTION MINING AGRICULTURAL Compact and powerful are the best words to describe the 10-9743. Inch for inch it has the highest output of any unit its size in the off road. It is constructed of heavy guage coated steel and engineered to filter in-cab air as well as incoming outside air when pressurization is required. The 10-9743 s high-performance, rugged construction and serviceability make it ideal for all off road applications where space is a minimum and dependability essential. A/C & HEATER UNITS Hose Kit #9850 Engine Compressor Bracket Kit Condenser Condenser Brackets BACKWALL 10-9743...Heater/Air Conditioner - 12v 10-9744...Heater/Air Conditioner - 24v 10-9745...Air Conditioner Only - 12v 10-9746...Air Conditioner Only - 24v Air Flow...265 CFM (450 m 3 /h) Capaacity...Heating - 28,600 BTU/Hr @ 100 F (7,207 kcal/h @ 37.8 C) Cooling - 18,000 BTU/Hr @ 36 F (4,536 kcal/h @ 2.2 C) Controls...Mode selector switch (heat or A/C), three speed fan switch, fixed setting thermostat, cable controlled water valve. Current Draw...16.1 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 8 amps @ 27.2 VDC (Includes 2 amps for A/C clutch). Motor...Totally sealed 12 or 24 volt permanent magnet type with long life brushes and heavy duty pre-lubricated sealed ball bearings. Weight...39 lbs. (18 kg) 18.2 in. (46.2 cm) 20.4 in. (51.8 cm) BACKWALL 6.8 in. (17.2 cm) 10-0020 3 Outside Air Adapter 10-0022 Heater Conversion Kit - to convert previously installed 10-9745/10-9746 units 10-0023 Universal Duct Kit 10-0026 Remote Mount Filter Horizontal 10-0032...12 volt 10-0033...24 volt Inline Booster Pressurizer Blower Motor - 12v...3949 Blower Motor - 24v...73R-4264 Blower Motor Assembly - 12v...RD-2-1206-2 Blower Motor Assembly - 24v...3911 Blower Wheel (CW)...3610 Blower Wheel (CCW)...3611 Control Cable...72R-8190 Evaporator...6677 Expansion Valve...1600 Filter (recirculation)...10-9935 Heater Core...6955 Heater Valve...2280 Knob...71R-4035 Lever Control...RD-3-4096-0 Louver (top-swivel) (2)...1719 Louver (front) (2)...1720 Resistor...1220 Switch - Fan, SPST...1050 Switch - Toggle, SPST...1020 Thermostatic Switch...1331 2013 MEI Corporation 579
EVAPORATOR UNIT CEILING MOUNT CONSTRUCTION MINING INDUSTRIAL The 10-9733 compact headliner air conditioner was designed for hard to air condition cabs. Its compact, low profile, heavy duty construction makes this unit the best in its class for off road applications. With its capacity to filter recirculated air and ability to use an outside air adapter, dusty environments are not a problem. Hose Kit #9850 Engine Compressor Bracket Kit Condenser Condenser Brackets 10-9733...Air Conditioner Only -12v 10-9734...Air Conditioner Only - 24v CEILING Air Flow...240 CFM Capacity...Cooling - 17,000 BTU/Hr with 36 F (4,272 kcal/h with 2.2 C) Current Draw...14.1 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 7 amps @ 27.2 VDC (includes 2 amps for A/C clutch) Weight...27 lbs. (12 kg) CEILING 10-0010 Fresh Air Box Assembly 10-0026...Horizontal 10-9936...Vertical Remote Mount Filter 10-0032...12 volt 10-0033...24 volt Inline Booster Pressurizer 10-9911 Fresh Air Replacement Filter Blower Motor - 12v...3393 Blower Motor - 24v...3237 Blower Motor Assembly - 12v...RD-2-2048-0 Blower Motor Assembly - 24v...RD-2-2048-1 Blower Wheel (2)...3715 Evaporator...6675 Expansion Valve...1600 Recirculation Filter...10-9917 Knob, Control...1271 Louver (3)...1720 Switch, 3 speed...1150 Thermostatic Sw. (preset 24 cap.)...1332 580 2013 MEI Corporation
EVAPORATOR UNIT CEILING MOUNT CONSTRUCTION MINING INDUSTRIAL The 10-9735 is the ultimate choice in off road air conditioning comfort. It is capable of producing a quick 240 CFM and filters recirculating cab air. Cab pressurization can be added using an outside air adapter and particulate filter. A HEATER OPTION rounds out the 10-9735 into a perfect package for equipment manufacturers looking for a powerful product in a minimum of space. Hose Kit #9850 Engine Compressor Bracket Kit Condenser Condenser Brackets CEILING 10-9735...Heater/Air Conditioner - 12v 10-9736... Heater/Air Conditioner - 24v 10-9737...Air Conditioner Only - 12v 10-9738...Air Conditioner Only - 24v Air Flow...240 CFM Capacity...Cooling - 17,000 BTU/Hr with 36 F (4.272 kcal/h with 2.2 C) refrigerant temp. and 80 0 F (26.7 C) wet bulb entering air Heating - 25,600 BTU/Hr @ 100 F (6,451 kcal/h @ 37.8 C) air temp. rise Current Draw...13 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 6.5 amps @ 27.2 VDC (includes 2 amps for A/C clutch) Weight...39 lbs. (18 kg) CEILING 10-0010 Fresh Air Box Assembly 10-0026...Horizontal 10-9936...Vertical Remote Mount Filter 10-0032...12 volt 10-0033...24 volt Inline Booster Pressurizer 10-9911 Fresh Air Replacement Filter 10-0036 Heater Conversion Kit - to convert previously installed 10-9737/10-9738 units Blower Motor Assembly - 12v...3996 Blower Motor Assembly - 24v...3997 Control Cable 34...2534 Evaporator...6676 Expansion Valve...1600 Fresh Air Box Assembly...10-0010 Heater Conversion Kit...10-0036 Heater Core...6953 Heater Valve...2284 Knob, Control, Rotary...RD-5-8812-0 Louvers (4)...1734 Switch, A/C only Toggle SPST...1020 Switch, Toggle DPDT...1060 Switch, Toggle SPDT...1028 Thermostatic Sw. (rotary 36 cap.)...1336 2013 MEI Corporation 581
EVAPORATOR UNIT SLIMLINE CEILING MOUNT CONSTRUCTION MINING INDUSTRIAL FEATURES Low Profile Unit for Extra Leg and Elbow Room Heavy Duty Construction For Off-Road Vehicles Combo Unit with A/C and Heat Hose Kit #9850 Engine Compressor Bracket Kit Condenser Condenser Brackets Optional Parts (below) 10-9753...12v 10-9754...24v CEILING Air Flow...250 CFM Performance...Cooling: 13,200 BTU Heating: 23,600 BTU Max.Power Required...9 amps @ 14v DC 4.5 amps @ 24v DC Weight...26 lbs. drain outlet 152 mm 6.0 425 mm 16.7 276.5 10.9 381 mm 15.0 heater outlet heater inlet CEILING 431.8 mm 17.0 75 mm 2.9 589 mm 23.2 Air Filter...call Blower Motor Assembly - 12v...call Blower Motor Assembly - 24v...call Evaporator...call Expansion Valve...1600 Filter, Recirculation...call Heater Core...call Heater Valve...call Knob (2)...1274 Louver (5)...call Resistor 12v...1230 Resistor 24v...call Switch, 3 speed...1151 Thermostatic Switch...1318 582 2013 MEI Corporation
EVAPORATOR UNIT CEILING MOUNT TRUCKS MOTOR HOMES VANS REFUSE The compact, profile design of the 10-9721 allows an out of the way ceiling mount in any vehicle. The high output of cold air blowing down from above is the ultimate in driver comfort. It can be installed facing any direction that best suits the particular application. Not only does this air conditioner allow a perfect installation in cabs where space is a problem but it is also an effective auxiliary cooling unit in vans, motor homes, and small delivery vehicles. Hose Kit #9850 Engine Compressor Bracket Kit Condenser Condenser Brackets CEILING 10-9721...12v 10-9722...24v CEILING Air Flow...235 CFM Capacity...Cooling - 17,000 BTU/Hr with 36 F (4,272 kcal/h with 2.2 C) Current Draw...18.5 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 9.3 amps @ 27.2 VDC (includes 2 amps for A/C clutch) Weight...24 lbs. (11 kg) Blower Motor Assembly - 12v...3994 Blower Motor Assembly - 24v...3995 Control Panel - 12v...RD-2-2997-1 Control Panel - 24v...RD-2-2997-2 Dome Light Assembly - 12v... 71R1262 Dome Light Assembly - 24v... 71R1264 Evaporator... 76R 5200 Expansion Valve...1600 Filter (foam)...9938 Knob (2)...1271 Louver...1734 Resistor...1220 Switch, 3 speed, Fan...1150 Thermostatic Switch...1332 2013 MEI Corporation 583
EVAPORATOR UNIT CEILING MOUNT BUSES VANS FIRE TRUCKS Offering a big airflow of 577 CFM, the 10-9410 is one of the highest capacity and best quality headliner air conditioners on the market. It can be used in a variety of larger cab applications such as: shuttle buses/vans, fire trucks, and smaller school buses. The electric water pump can be used in tilt cab situations or in extremely humid applications. Hose Kit #9850 Engine Compressor Bracket Kit Condenser Condenser Brackets 10-9410...12v CEILING Air Flow...577 CFM Capacity...Cooling - 39,500 BTU/Hr with 36 F (9,954 kcal/h with 2.2 C) Current Draw...26.3 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 13.2 amps @ 27.2 VDC (includes 2 amps for A/C clutch) Weight...33 lbs. (11 kg) CEILING 2844 Electric Water Pump Moisture Sensor Kit Blower Motor Assembly - 12v... 73R5502 Blower Motor Assembly - 24v... 73R5504 Evaporator... 76R6040 Expansion Valve...1602 Filter...9939 Knob...1271 Louver (4)...1714 Pump (condensate)...rd-5-8424-0 Relay - 12v...1250 Relay - 24v...1251 Resistor...1220 Switch, Fan 3 Speed...1150 Switch Assembly - 12v...RD-5-8425-1 Switch Assembly - 24v...RD-5-8425-3 Thermostatic Switch...1336 584 2013 MEI Corporation
A/C UNIT ROOFTOP MOUNT HEAVY, MEDIUM & LIGHT DUTY TRUCKS CONSTRUCTION AGRICULTURAL CABS A/C & HEATER UNITS The 10-9718 is the ultimate rooftop air conditioner design. It is a lightweight, high capacity unit with a styled low profile that fits the aerodynamic truck designs of today. Notice the sloping front that rides comfortably over center marker lights. A low profile plenum extends 1-1/2 into the cab and blends easily into the headliner leaving ample head room. High-velocity air can be directed 360 through large diffusers located directly below the double blowers. Also featured is a cab air filter incorporated into the plenum. The heavy duty design contains tube and fin coil construction, a high capacity receiver drier and a trinary system protection switch. The trinary switch extends condenser motor life and guards against premature component failure. Should the 10-9718 ever need service, only two outside bolts need to be removed to access any component. The 10-9718 is perfect for most truck applications, especially C.O.E. s where space in the cab is limited. NOTE: This is not a self contained unit. Hose Kit #9855 Engine Compressor Bracket Kit ROOFTOP 10-9718...12v 10-9719...24v UPS Due to size and weight, this unit must be shipped by LTL Carrier. Air Flow...265 CFM (450 m 3 /h) Capacity...16,000 BTU/Hr (4,032 kcal/h) Current Draw...33 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 16.5 amps @ 27.2 VDC (includes 2 amps for A/C clutch) Weight...44 lbs. (33.6 kg) Condenser Coil...The coil is aluminum fin and copper tube construction. This material selection, which includes a tube of.022 (6cm) wall thickness, results in an effective, lightweight and rugged coil. Condenser Motor...The motor is a permanent magnet type selected for its extended life. The motor is sealed and a slinger ring and hub cap added for weather protection. The fan is aluminum with a heavy duty spider and riveted blades. 10-0041 10-0042 10-0043 Bug Screen Winter Cover Universal Roof Mount Kit ROOFTOP Blower Wheel (CCW)...3611 Blower Wheel (CW)...3610 Condenser...6061 Condenser Fan...3810 Condenser Motor - 12v...3542 Condenser Motor - 24v...3514 Evaporator Coil...6539 Evaporator Motor - 12v...3238 Evaporator Motor - 24v...3234 Expansion Valve...1600 Knobs (2)...1271 Louver Assembly 4-1/2 (2)...1730 Receiver Drier...7123 Relay - 12v...1261 Relay - 24v...1262 Replacement Plenum Gasket...RD2-1297-0 Replacement Roof Seal...RD2-1240-0 Resistor...1220 Rotary Switch - 3 speed, 5 terminal...1150 Thermostatic Switch...1336 Trinary Pressure Switch...1560 2013 MEI Corporation 585
A/C UNIT ROOFTOP MOUNT Trucks NOTE: This is not a self contained unit. Hose Kit #9850 Engine Compressor Bracket Kit FEATURES Heavy Duty Steel Construction Lighted Integrated Headliner Control Panel Variable Speed Blower Switch Adjustable Thermostat Switch Various Louver Configurations Durable Double Wheel Plastic Blower Intergrated Receiver Drier Integrated Single Fan Condenser High and Low Pressure Switch ROOFTOP 10-9720...12v Air Flow...245 SCFM (415 SCMH) Due to size and weight, this unit must be shipped by LTL Carrier. 24.9 UPS 25.4 ROOFTOP Performance...13,500 BTU/h (4.0 kw) 7.7 Max.Power Required...25 amps @ 12v DC Weight...74 lbs. (33.6 kg) 15.7 3.7 1.5 MAX. MOUNTING DIMENSION TO TOP OF ROOF Winter Cover...call Blower Motor (Evaporator) - 12v...3389 Evaporator Blower Wheel (2)...3738 Condenser...call Evaporator...6518 Expansion Valve...1600 Fan Blade, 10...3810 Knob (Blower Switch)...1273A Knob (Thermostatic)...1273 Louver Assembly - small (2)...1747 Louver Assembly - large (2)...18-2020 Motor, Condenser - 12v...3131 Receiver Drier...7129 Switch, 3 speed...1160 Switch, High Pressure...1491 Switch, Low Pressure...1450 Thermostatic Switch...1336 586 2013 MEI Corporation
A/C UNIT ROOFTOP MOUNT CONSTRUCTION MINING AGRICULTURAL The 10-9731 has set the standard in the off highway market for rooftop air conditioning. Years of development have made this unit the most rugged, dependable and serviceable unit in the industry. It s heavy guage steel construction and heavy duty components assure trouble free operation in the most extreme environments. Should service be necessary, rubber hood tie-downs unlatch and expose easily removable components to minimize expensive down time. Hose Kit #9855 Engine Compressor Bracket Kit NOTE: Not a self contained unit 10-9731...12v 10-9732...24v UPS Due to size and weight, this unit must be shipped by LTL Carrier. ROOFTOP Air Flow...Evaporator - 320 CFM (544 m 3 /h) Condenser - 850 CFM (1444 m 3 /h) Capacity...22,000 BTU/Hr (5,544 kcal/h) Current Draw...29 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 15 amps @ 27.2 VDC (includes 2 amps for A/C clutch) Weight...104 lbs. (47 kg) ROOFTOP 10-0026...Horizontal 10-9936...Vertical Remote Mount Filter 10-9929...Repl. Filter 10-9925...Backpack Filter 10-9928...Repl. Filter 10-0032...12 volt 10-0033...24 volt Inline Booster Pressurizer 10-0060...Pressurizer Inlet Cap 10-0050 Stiffener Brackets 10-0045 Fresh Air Filter Box 10-0055 Winter Cover Blower Motor Assembly - 12v...3909 Blower Motor Assembly - 24v...RD-5-3860-5 Blower Wheel...3625 Blower Wheel...3626 Condenser...6050 Drain Hose...8528 Evaporator...6592 Expansion Valve...1600 Fan Blade, 10...3810 Filter, Recirculation...9930 Gasket (Plenum)...RD-2-1297-0 Knob (2)...1271 Louver Assembly 4-1/2 (2)...1730 Motor, Blower (Evaporator) - 12v...3232 Motor, Blower (Evaporator) - 24v...3224 Motor, Condenser - 12v...3512 Motor, Condenser - 24v...3514 Plenum Assembly...RD-2-1290-0 Receiver Drier...7126 Resistor...1220 Switch, 3 speed...1150 Switch, Pressure, Binary...1510 Thermostatic Switch...1336 2013 MEI Corporation 587
A/C UNIT ROOFTOP MOUNT CONSTRUCTION MINING AGRICULTURAL NOTE: This is not a self contained unit. FEATURES Ideal Choice for Heavy Duty Severe Operating Conditions Off-Road Applications Heavy Duty Sealed Bearing Motors Heavy Gauge Steel Construction Bult to Last Optional Side Mount Fresh Air Filter to Double as a Cab Pressurizer Hose Kit #9855 Engine Compressor Bracket Kit Optional Parts (below) 10-9755...12v 10-9756...24v Due to size and weight, this unit must be shipped by LTL Carrier. UPS ROOFTOP Air Flow...264 SCFM Performance...17,000 BTU/h Max.Power Required...22 amps @ 12v DC 11 amps @ 24v DC Weight...85 lbs. 618 mm 24.3 309 mm 12.1 374 mm 14.7 667 mm 26.25 ROOFTOP 460 mm 18.1 282 mm 11.1 10-0032...12 volt 10-0033...24 volt Inline Booster Pressurizer Fresh Air Filter...call Side Mount Winter Cover...call Blower Wheel (2)...3738 Condenser...6032 Evaporator...call Expansion Valve...1604 Fan Blade, 10...3810 Knob (2)...call Louver (2)...1706 Motor, Blower (Evaporator) - 12v...3242 Motor, Blower (Evaporator) - 24v...3236 Motor, Condenser - 12v...3131 Motor, Condenser - 24v...3003 Receiver Drier...7232 Switch, 3 speed, 12v...1155 Switch, 3 speed, 24v...1154 Switch (Low Pressure)...1450 Switch (High Pressure)...1491 Thermostatic Switch...1336 588 2013 MEI Corporation
A/C Unit ROOFTOP MOUNT (WITH HEAT OPTION) CONSTRUCTION MINING AGRICULTURAL The 10-9777 rooftop unit uses the latest design techniques to produce a rugged unit, which combines Euro styling with heavy duty components that will withstand the roughest applications. The 10-9777 Heater/Air Conditioner is the first in the industry to employ engineered resin technology. This Euro styling and design sets this unit far beyond the competition in appearance, durability and performance. Hose Kit #9855 Engine Compressor Bracket Kit NOTE: Not a self contained unit ROOFTOP 10-9777...Heater A/C - 12v 10-9778...Heater A/C - 24v 10-9779...A/C Only - 12v 10-9780...A/C Only - 24v UPS Due to size and weight, this unit must be shipped by LTL Carrier. Air Flow...400 CFM Capacity...Cooling - 25,000 BTU/Hr with 36 F (7.3kW with 2.2 C) refrigerant temp. and 80 F (26.7 C) wet bulb entering air Heating - 45,000 BTU/Hr @ 100 F (13.2kW @ 37.8 C) air temp. rise Current Draw...38.2 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 19.1 amps @ 27.2 VDC (includes 2 amps for A/C clutch) Weight...65 lbs. ROOFTOP 10-0026...Horizontal 10-9936...Vertical Remote Mount Filter 10-0032... 12 volt 10-0033... 24 volt Inline Booster Pressurizer Binary Switch...1511 Blower Assembly - 12v...3998 Blower Assembly - 24v...3999 Condenser...6308 Condenser Fan - 12v...06-2612 Condenser Fan - 24v...06-2613 Evaporator...76R-5820 Expansion Valve...1602 Heater Core...76R-1650 Knob...RD5-8812-0 Louver...72R-3140 Receiver Drier...7555 Relay - 12v...1261 Relay - 24v...1262 Resistor - 12v...71R-1402 Resistor - 24v...1364 Rocker Switch...71R-0840 Rotary Switch...1151 Thermostatic Switch...1332 2013 MEI Corporation 589
A/C UNIT ROOFTOP MOUNT (WITH HEATER) CONSTRUCTION MINING AGRICULTURAL The 10-9610 rooftop heater/air conditioner is designed with versatility and dependability in mind. In addition, this unit comes with HEAT. It is a solid, dependable unit utilizing the most rugged and highest quality components available. Hose Kit #9855 Engine Compressor Bracket Kit NOTE: Not a self contained unit ROOFTOP 10-9610...12v 10-9611...24v UPS Due to size and weight, this unit must be shipped by LTL Carrier. Air Flow...400 CFM Capacity...Cooling - 25,000 BTU/Hr with 36 F (6,300 kcal/h with 2.2 C) refrigerant temp. and 80 F (26.7 C) wet bulb entering air Heating - 45,000 BTU/Hr @ 100 F (11,340 kcal/h @ 37.8 C) air temp. rise Current Draw...38.2 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 19.1 amps @ 27.2 VDC (includes 2 amps for A/C clutch) Weight...90 lbs. (41 kg) \ ROOFTOP 10-0026...Horizontal 10-9936...Vertical Remote Mount Filter 10-0045 Fresh Air Filter Box 10-0032...12 volt 10-0033...24 volt Inline Booster Pressurizer 10-0050 Stiffener Brackets Blower Wheel, CCW...3748 Blower Wheel, CW...3747 Circuit Breaker, 20amp - 24v...1216 Circuit Breaker, 35amp - 12v...1219 Condenser...6044 Evaporator...6540 Expansion Valve...1600 Fan Motor Assm - 12v (12 dia.)...3595 Fan Motor Assm - 24v (12 dia.)...3596 Filter, Air Recirculation...9951 Heater Core...76R-1860 Heater Valve...2280 Knob, Control...1271 Louver - 4.5 diameter...1730 Motor 12v...3322 Motor 24v...3472 Receiver Drier...7123 Relay - 12v...1261 Relay - 24v...1262 Resistor...1220 Switch, Fan ON-ON-ON...1028 Switch, High Pressure...1487 Switch, Low Pressure...1399 Switch, Mode ON-OFF-ON...1060 Thermostatic Sw. (part of elec panel assm)...1332 590 2013 MEI Corporation
A/C UNIT ROOFTOP/side MOUNT CONSTRUCTION MINING AGRICULTURAL NOTE: This is not a self contained unit. Hose Kit #9850 Engine Compressor Bracket Kit Condenser (rad. or remote mnt.) Condenser Brackets FEATURES Can be Mounted in Either Position Vertical or Horizontal Control Panel can be Remote Mounted for Operator Convenience Rubber Tie-down Latches Heavy Duty Construction Optional Remote Mount Filter and Optional In-line Booster Blower Combo A/C and Heat ROOFTOP 10-9620...12v 10-9621...24v Air Flow...400 CFM Performance...Cooling: 25,000 BTU Heating: 45,000 BTU Max.Power Required...22.7 amps @ 13.6v DC 11.4 amps @ 27.2v DC Weight...70 lbs. Due to size and weight, this unit must be shipped by LTL Carrier. UPS ROOFTOP 10-0026...Horizontal 10-9936...Vertical Remote Mount Filter 10-0032...12 volt 10-0033...24 volt Inline Booster Pressurizer 72R4531 Air Outlet Adapter for In-line Booster Blower Wheel (2)...3747 Evaporator... 76R5700 Expansion Valve...1600 Filter, Recirculation...10-9912 Gasket (Plenum)...RD3-10210-0 Heater Core... 76R1870 Motor, Blower (Evaporator) - 12v...3182 Motor, Blower (Evaporator) - 24v...3472 Thermostatic Switch...1332 2013 MEI Corporation 591
FACTORY TYPE DROP-IN EVAPORATOR KIT FREIGHTLINER, FORD, STERLING - CARGO SERIES TRUCKS 1990 and ON An integrated air conditioning package for the LCF Freightliner, Ford/Sterling Cargo applications. The heater/air conditioning kit replaces the existing factory heater and out performs any other air conditioning option available. The kit includes everything for a complete installation. FACTORY TYPE 10-9440 System Kit Includes: Binary Switch Condenser Drier Heater A/C Unit Installation Kit Rotory Cable Controls 10-9440...Heater/Air Conditioner - 12v A/C Unit Also Requires: Engine Compressor Bracket Kit (shipped in 3 separate boxes) FACTORY TYPE Air Flow...260 CFM Capacity...Cooling - 20,000 BTU/Hr with 36 F (kw6.82 with 2.2 C) refrigerant temp. and 80 F (26.7 C) wet bulb entering air Heating - 34,000 BTU/Hr @ 100 F (kw9.67 @ 37.8 C) air temp. rise Current Draw...20 amps @ 13.6 VDC Weight...41 lbs. (19 kg) Blower Motor Assy. - 12v...3980 Condenser...6310 Evaporator...RD2-3425-0 Expansion Valve...1600 Filter...9945 Receiver Drier...7126 Binary Switch...1512 Thermostatic Switch...1332 592 2013 MEI Corporation
FACTORY TYPE DROP-IN EVAPORATOR KIT FORD L SERIES CONVENTIONALS The 10-9729 evaporator kit for the Ford L Series takes advantage of the existing O.E.M. housing and blower system. The complete system includes condenser, evaporator, hose kit and installation kit to make an easy and complete installation. NOTE: DOES NOT FIT FORD AEROMAX 10-9729 1...1991-1996 10-9730 2...*1997- On *(Limited Availability) UPS 1) Due to size and weight, this unit must be shipped by LTL Carrier. 2) (shipped in 3 separate boxes) Capacity...Meets OEM manufacturer s specifications System Kits Includes: Kits use high-efficiency style condenser. Drop-in Evaporator FACTORY TYPE Thermostat & Expansion Valve Refrigerant Hose & Fittings High Capacity Accumulator Wiring Harness Condenser Installation Hardware Accumulator...7406 Condenser (1997-on)...6314 Condenser (1991-96)...6068 Evaporator...6514 Orifice Tube...1651 Engine Compressor Bracket Kit FACTORY TYPE FACTORY TYPE DROP-IN EVAPORATOR KIT NAVISTAR S 4000, 7000, 8000 SERIES TRUCKS 1995-2002 The 10-9275 drop-in evaporator kit takes advantage of the OEM housing and blower motor assembly, R134a compatible. 10-9275 (shipped in 3 separate boxes) Capacity...Meets OEM manufacturer s specifications 10-9275 System Kit Includes: Drop-in Evaporator Thermostat & Expansion Valve Refrigerant Hose & Fittings High Capacity Receiver Drier Trinary Protection Switch Wiring Harness Condenser Installation Hardware Condenser...6034 Evaporator...RD2-2905-0 Expansion Valve...1648 Receiver Drier...7155 Thermostatic Switch...1332 Trinary Switch...1565 Engine Compressor Bracket Kit 2013 MEI Corporation 593
FACTORY TYPE UNDER DASH MACK R MODEL CABS The 10-9725 heater/air conditioner is without question the best unit available for all Mack R model cabs. It can be installed using existing mounting points in all R, U, DM, RL/RS and RW cabs. Features include high performance, factory installed look and a completely new air control system. FACTORY TYPE 10-9725...Grey - 12v 10-9726...Beige - 12v Hose Kit #9850 Engine Compressor Bracket Kit Condenser Condenser Brackets FACTORY TYPE Air Flow...250 CFM Capacity...Cooling - 20,000 BTU/Hr with 36 F (5,040 kcal/h with 2.2 C) refrigerant temp. and 80 F (26.7 C) wet bulb entering air Heating - 27,000 BTU/Hr @ 100 F (6,804 kcal/h @ 37.8 C) air temp. rise Current Draw...14 amps @ 13.6 VDC Weight...34 lbs. (15 kg) Air Actuator Assembly (2)...2014 Blower Wheel...3650 Cable, Control...2531 Evaporator...6580 Expansion Valve...1600 Heater Core...6815 Heater Valve...2210 Knob (3)...71R-4035 Louver...1738 Louver - A/C (2)...1710 Louver (2-1/2 )...72R-2550 Micro Switch...1240 Motor - 12v...3044 Resistor...1220 Switch, Fan...1050 Thermostatic Switch...1332 594 2013 MEI Corporation
FACTORY TYPE IN DASH NAVISTAR S 4000, 7000, 8000 SERIES TRUCKS 1983-1994 The 10-9723 performance and features go beyond anything offered in-dash for all S series and new conventional vehicles. With styling that matches the factory dash, the 10-9723 includes Max A/C and Defrost Interlock features not offered by any other Navistar conventional S series or 4000, 7000, and 8000 series systems. The 10-9723 mounts directly to the firewall and mates to existing inlet and outlet ducting. FACTORY TYPE 10-9723 System Kit Includes: Heater A/C Unit Heater Hose & Water Valve Refrigerant Hose & Fittings High Capacity Receiver Drier Trinary Protection Switch Wiring Harness Condenser Engine Compressor Installation Hardware Bracket Kit 10-9723 (shipped in 4 separate boxes) FACTORY TYPE Air Flow...265 CFM Capacity...Cooling - 22,400 BTU/Hr with 36 F (5,645 kcal/h with 2.2 C) refrigerant temp. and 80 F (26.7 C) wet bulb entering air Heating - 29,700 BTU/Hr @ 100 F (7,484 kcal/h @ 37.8 C) air temp. rise Current Draw...19.5 amps @ 13.6 VDC (includes 4 amps for A/C clutch) Weight...48 lbs. (22 kg) Blower Motor - 12v...3034 Blower Wheel...3750 Condenser...6310 Evaporator...6537 Expansion Valve...1600 Heater Core...6944 Receiver Drier...7156 Trinary Switch...1565 Thermostatic Switch...1332 2013 MEI Corporation 595
UNIVERSAL MOUNT CEILING, FLOOR, or UNDER DASH UNIVERSAL APPLICATIONS Perfect for lighter duty applications, the 10-9400 delivers high capacity output for its size. It can be mounted on the floor, ceiling or under dash, which ever is required. In addition, optional air outlets are available so that air can be ducted where it s required. Hose Kit #9850 Engine Compressor Bracket Kit Condenser Condenser Brackets Temperature Control Kit #10-0009 UNIVERSAL 10-9400...A/C only - 12v 10-9401...A/C only - 24v 10-9402...Heater only - 12v 10-9403...Heater only - 24v Air Flow...268 CFM (356 m 3 /h) Capacity...Cooling - 17,736 BTU/Hr @ 36 0 F (5.2 kw @ 2.2 0 C) Current Draw...17.8 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 8.9 amps @ 27.2 VDC (includes 2 amps for A/C clutch) Weight...15 lbs. (6.8 kg) UNIVERSAL 10-0005 2-1/2 Outlet Adapter 10-0006 4 Louver Outlet 10-0007 Floor Support Kit 10-0009 Temperature Blower Control Blower Wheel (2)...3715 Evaporator...76R-5320 Expansion Valve...1600 Filter...9938 Motor - 12v...3385 Motor - 24v...73R-4064 Resistor...1220 Thermostat...1315 Wire Harness Assembly...RD-2-3258-0 (Fits 10-9400, 10-9402 units only) 596 2013 MEI Corporation
UNIVERSAL MOUNT (with Reversible Cores) CONSTRUCTION MINING AGRICULTURAL Designed to be floor mounted behind the seat the 10-9476 is low profile and provides significant air flow. The plenum options have been designed to offer maximum flexibility to duct the air where it s needed. A variety of remote-mount controls are available to complete the installation. A plastic trim kit is also available to be used with the louvered plenum assembly to complete the integrated look. Floor mount w/reversible cores Hose Kit #9850 Engine Compressor Bracket Kit Condenser Condenser Brackets UNIVERSAL 10-9476...Heater/Air Conditioner - 12v 10-9477...Heater/Air Conditioner - 24v 10-9478...Air Conditioner Only - 12v Air Flow...430 CFM (730 m 3 /h) Capacity...Heating - 31,600 BTU/Hr @ 100 F (9.3kW @ 37.8 C) air temp. rise Cooling - 33,070 BTU/Hr @ 36 F (9.7 @ 2.2 C) refrigeranttemp. and 80 F (26.7 C) wet bulb Current Draw...11.2 amps @ 27.2 VDC (Includes 2 amps for A/C clutch) Weight...41 lbs. (19 kg) UNIVERSAL 10-0011 Ductable Plenum Assembly 10-0012 Louvered Plenum Assembly 10-0029 Trim / Installation Kit Blower Assembly - 12v...RD-3-7383-0 Blower Assembly - 24v...RD-3-7383-1 Evaporator...76R-6650 Expansion Valve...1602 Filter (replacement)...10-9912 Heater Core...76R-3465 Relay - 12v...1261 Relay - 24v...1262 Resistor - Speed Control...1220 Thermostatic Switch...1315 2013 MEI Corporation 597
hose installation kits for all units w/radiator or remote mounted condenser Hose Length & Size Includes 9850 18 ft., #6 & #10, 6 ft., #8 All fittings with R134a service ports, high and (with Atco type fittings) Low pressure switches, drier and Mounting backet, Assortment of hose ties and Rubber clamps. 9850EZ (with EZ Clip type fittings) Same as above with EZ Clip pliers FOR ROOF UNITS ONLY Hose Length & Size Includes 9855 20 ft., #8 & #10 Fittings (with R134a Service Ports) (with Atco type fittings) 9855EZ (with EZ Clip type fittings) Same as above with EZ Clip pliers condensers Multi-Flow Aluminum Heavy Duty RetroFit UNITS Frame is designed for numerous mounting locations Multi-Flow Cross Section 4 Pass Coil Male Insert O ring Fittings, High density fin count produces exceptional heat transfer. A B UNITS Multi-Flow Condensers PART# A B C Width BTU s 6302 10 3/4 25 3/4 22 5/8 1-3/16 14405 6304 12 21 3/4 18 13/16 12940 6306 12 25 3/4 22 13/16 15965 6324 14 14 11 5/16 3/4 n/a 6325 14 18 16 1/4 3/4 n/a 6308 14 21 3/4 18 13/16 1-3/16 15230 6310 14 25 3/4 22 13/16 1-3/16 18476 6312 15 1/2 29 5/8 26 11/16 1-3/16 24880 6326 19 1/4 29 5/8 26 3/4 3/4 n/a (bracket built into condenser) 6314 19 1/2 29 1/4 28 11/16 1-3/16 31206 Economy Multi-Flow Condensers PART# A B Width 6304A 12 21 3/16 0.71 6306A 12 25 3/8 0.71 6308A 13 3/8 21 3/16 0.71 6310A 14 1/4 26 3/8 0.71 6312A 15 1/2 28 7/8 0.71 6314A 18 3/4 31 7/8 0.71 C Condenser Bracket Kits 9010 Univeral Condenser Bracket Kit Attaches directly to condenser 9013 Multi-Flow Condenser Brackets Attaches directly to aluminum multi-flow condensers (sold in pairs) 598 2013 MEI Corporation
pressurizer / booster blower CONSTRUCTION MINING AGRICULTURE Attaching directly to the 10-0026 and 10-9936 remote mount filters (shown below), the Booster Blower forces dust free air into the cab through our heater and air conditioner units. 10-0032...12v 10-0033...24v Air Flow...140 CFM (283 m 3 /h) with filter, 230 CFM (391 m 3 /h) without filter Current Draw...10.2 amps @ 13.6 VDC 6 amps @ 27.2 VDC Dimensions...4 Inlet 3 Outlet Motor/Fan...One 12VDC, single speed (24VDC available) Weight...7 lbs. (3 kg) UNITS Blower Moter - 12v...3130 Blower Moter - 24v...3003 Blower Wheel...3625 UNITS remote mount filters (used with Pressurizer / Booster Blower) BACKPACK MOUNT 10-9925 9 x 16 long (228mm x 464mm) HORIZONTAL MOUNT 10-0026 10 1/4 x 18 long (260mm x 457mm) VERTICAL MOUNT 10-9936 10 1/4 x 23 3/4 long (260mm x 503mm) REPLACEMENT PARTS REPLACEMENT PARTS REPLACEMENT PARTS Filter...10-9928 Hood...10-0080 Band...10-0081 Rubber Elbow...10-0082 Filter...10-9929 Hood...10-0085 Band...10-0086 Filter...10-9929 Band...10-0086 2013 MEI Corporation 599
CONDENSER UNIT REMOTE MOUNT CONSTRUCTION MINING AGRICULTURAL A versatile remote mount condenser that can be installed on top of a horizontal surface or hung below a roof or floor panel. Suitable for use in off road applications or on medium duty trucks or specialty vehicles where a radiator mount or roof-top condenser cannot be used. REMOTE 10-9350...12v (with In-line drier) 10-9351...24v (with In-line drier) Capacity...30,000 BTU/Hr (6,804 kcal/h) Current Draw...12.3 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 6.17 amps @ 27.2 VDC (includes 2 amps for A/C clutch) Fan...10-inch diameter fan with single speed long life motor Weight...45 lbs. (16.8 kg) REMOTE 10-0065 Shock Mount Assembly (2 required) 10-0066 Condenser Mount Bracket Kit Binary Switch...1510 Condenser...6271 Diode...71R-1900 Fan...3810 Moisture Indicator...4150 Motor - 12v...3512 Motor - 24v...3514 Receiver Drier...7502 Relay - 12v...1261 Relay - 24v...1262 600 2013 MEI Corporation
CONDENSER UNIT UNIVERSAL MOUNT CONSTRUCTION MINING AGRICULTURAL FEATURES: Single Fan Universal Mount Condenser Heavy Duty Steel Construction Heavy Duty Tube and Fin Condenser Coil Mounts: Horizontal or Vertical Quick Release Latches on Cover for Easy Access Rust Resistance Finish UNIVERSAL 10-9360...12v 10-9361...24v Air Flow...740 SCFM (1,257 SCMH) Performance...27,500 BTU/h (5.0 kw) UNIVERSAL Max.Power Required...15 amps @ 12v DC 6.3 amps @ 28v DC Weight...42 lbs. (19.1 kg) Blower Motor - 12v...3131 Blower Motor - 24v...3003 Blower Wheel Fan Blade...3810 Condenser...6032 2013 MEI Corporation 601
CONDENSER UNIT REMOTE MOUNT CONSTRUCTION MINING AGRICULTURAL The 10-9365 offers a two coil design which allows for superior capacity to handle any auxiliary air conditioning system. Being compact in size, the 10-9365 can be mounted horizontally or vertically to fit your particular application. REMOTE 10-9365...12v 10-9366...24v UPS Due to size and weight, this unit must be shipped by LTL Carrier. Air Flow...900 CFM Capacity...33,000 BTU/Hr (6,804 kcal/h) Current Draw...24 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 12 amps @ 27.2 VDC (includes 2 amps for A/C clutch) Fan...Two 8 diameter bladed fans Weight...40 lbs. (18 kg) REMOTE 10-0068 Rock Guard 10-0069 Vertical Mounting Brackets Condenser...6253 Fan (2)...3382 Fan Guard (2)...RD-5-6767-0 Fitting Bracket Assembly...RD-4-3804-0 Motor - 12v (2)...73R-0562 Motor - 24v (2)...3514 Relay - 12v Sealed...1261 Relay - 24v Sealed...1262 602 2013 MEI Corporation
CONDENSER UNIT UNIVERSAL MOUNT CONSTRUCTION MINING AGRICULTURAL FEATURES Dual Fan Universal Mount Condenser Heavy Duty Steel Construction Durable Permanent Magnet Motor Heavy Duty Tube and Fin Condenser Coil Receiver Drier (Intergrated) Quick Release Latches on Cover for Easy Access UNIVERSAL 10-9367...12v 10-9368...24v Air Flow...1,000 SCFM (1,700 SCMH) Performance...37,000 BTU/h (10.8 kw) Max.Power Required...20 amps @ 14v DC 10 amps @ 24v DC Weight...21 lbs. (9.5 kg) UNIVERSAL Blower Motor (2) - 12v...3130 Blower Motor - 24v...3369 Fan Blades (2)...3605 Condenser...call Receiver Drier...7232 2013 MEI Corporation 603
CONDENSER UNIT REMOTE MOUNT CONSTRUCTION MINING AGRICULTURAL Built to withstand the punishment of off-road environments, the 10-9375 is a rugged, heavy duty condenser with the tremendous capacity to support two cab air units. Rubber shock mounts absorb vibration while coated heavy guage steel encases the working components. The 10-9375 contains a binary system protection switch attached to a high capacity receiver drier. Two sealed permanent magnet fan motors provide extended life and help to minimize down time. If service is necessary, rubber hood latches provide simple access to all serviceable components. REMOTE 10-9375...12v 10-9376...24v UPS Due to size and weight, this unit must be shipped by LTL Carrier. Air Flow...1500 CFM Capacity...44,500 BTU/Hr (11,214 kcal/h) Current Draw...26 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 13 amps @ 27.2 VDC (includes 2 amps for A/C clutch) Fans...Two 10 diameter bladed fans Motors...Two single speed, long life sealed with pre-lubricated bearings Weight...74 lbs. (33.6 kg) REMOTE 10-0065 Shock Mount Assembly Condenser...6041 Fan Blade (2)...3810 Fan Guard (2)...RD-5-3894-1 Fitting Bracket Assembly...RD-4-3804-0 Motor - 12v (2)...3512 Motor - 24v (2)...3514 Receiver Drier...7156 Shock Mount (2)...10-0065 Switch, Pressure, Binary...1500 604 2013 MEI Corporation
CONDENSER UNIT UNIVERSAL MOUNT CONSTRUCTION MINING AGRICULTURAL FEATURES Maximum Performance Dual Fan Universal Mount Condender Heavy Duty Steel Construction Durable Permanent Magnet Motor Heavy Duty Tube and Fin Condenser Coil Integrated Receiver Drier UNIVERSAL 10-9377...12v 10-9378...24v Air Flow...1,600 SCFM (2,718 SCMH) Performance...45,000 BTU/h (13.2 kw) Due to size and weight, this unit must be shipped by LTL Carrier. UPS 4.0 11.6 4.5 2.5 13.3. 1/2 FITTING MALE INVERTED O -RING (3/4-16 UNF THREAD) REFREGERANT INLET CONDENSER COIL UNIVERSAL Max.Power Required...25 amps @ 14v DC 12.5 amps @ 28v DC.50 33.3 Weight...84 lbs. (38.1 kg) 1.7.44 DIA. MTG. HOLES TYP. (4) 8.0 Shock Mount Kit...call Blower Motor (2) - 12v...3131 Blower Motor - 24v...3003 Fan Blade (2)...3810 Condenser...call Receiver Drier...7156 2013 MEI Corporation 605
CONDENSER UNIT ROOFTOP MOUNT HEAVY & MEDIUM DUTY TRUCKS CONSTRUCTION AGRICULTURAL The 10-9385 is the optimal rooftop condenser design. A light weight, compact, and high capacity unit with a styled low profile that fits the aerodynamic vehicle designs of today. A sloping front provides clearance for marker lights while creating effective air flow when roof space is minimal or air shields are used. Condenser Only not a complete A/C Unit 10-9385...12v 10-9386...24v Due to size and weight, this unit must be shipped by LTL Carrier. UPS ROOFTOP Air Flow...1500 CFM Capacity...24,000 BTU/Hr (6,048 kcal/h) Current Draw...12 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 6 amps @ 27.2 VDC (includes 2 amps for A/C clutch) Condenser Coil...The coil is aluminum fin and copper tube construction, this material selection, which includes a tube of.022 (6 cm) wall thickness, results in an effective, lightweight rugged coil. Motor...The motor is a permanent magnet type selected for its extended life. The motor is sealed and a slinger ring and hub cap have been added for weather protection. The fan is aluminum with a heavy duty spider and riveted blades. Weight...23 lbs. (10.5 kg) ROOFTOP 10-0071 Bug Screen 10-0072 Winter Cover 10-0073...12v 10-0074...24v Receiver Drier Kit Condenser (except w/4 rows)...77r-0620 Condenser (w/4 rows)...6063 Diode...71R-1900 Fan...3810 Motor - 12v...3978 Motor - 24v...3514 Pressure Switch - High...1487 Pressure Switch - Low...1447 Receiver Drier (optional models only)...7128 Receiver Drier...7126 Receiver Drier (optional models)...rd-5-6544-1 Relay - 12v...1261 Relay - 24v...1262 Switch, Trinary...1560 606 2013 MEI Corporation
CONDENSER UNIT ROOFTOP MOUNT HEAVY & MEDIUM DUTY TRUCKS CONSTRUCTION AGRICULTURAL The latest in design technology was used in developing the 10-9395. From it s modern aerodynamic look to it s high capacity, the 10-9395 out performs any unit in its class. Under the cover, heavy duty construction assures that the demands of the class 8 marketplace are met. Condenser Only not a complete A/C Unit 10-9395...12v 10-9396...24v ROOFTOP Air Flow...970 CFM Capacity...38,800 BTU/Hr (9,576 kcal/h) Current Draw...15 amps @ 13.6 VDC (includes 4 amps for A/C clutch) 8.5 amps @ 27.2 VDC (includes 2 amps for A/C clutch) Motor/Fan...Two 11-inch (27.9 cm) diameter pancake motor assembly Weight...30 lbs. (14 kg) ROOFTOP Condenser...77R-0630 Fan/Motor Assembly - 12v (2)...73R-8572 Fan/Motor Assembly - 24v (2)...73R-8574 2013 MEI Corporation 607
CONDENSER UNIT ROOFTOP MOUNT FIRE TRUCKS CRASH & RESCUE VEHICLES DUAL EVAPORATORS The 10-9398 offers amazing performance for a light weight dual fan power condenser. Its high capacity gives the installer a condenser to match with high performance evaporators or dual evaporator systems. The latest motor technology allows for the lowest profile possible while maintaining high output. Condenser only - not a complete a/c unit. ROOFTOP 10-9398...12v 10-9399...24v Air Flow...2,011 CFM UPS Due to size and weight, this unit must be shipped by LTL Carrier. 10.5 in. (26.7 cm) 22.1 in. (56.1 cm) 16.4 in. (41.8 cm) ROOFTOP Capacity...45,200 BTU/Hr (11,340 kcal/h) Current Draw...30.3 amps @ 13.6 VDC 42.5 in. (108 cm) Motor/Fan...Two 16-inch diameter pancake motor assembly Weight...85 lbs. (38.6 kg) Coil Assembly...77R-0990 Fan, Motor Assembly 12v (2)...3568MP Fan, Motor Assembly 24v (2)...3569MP Receiver Drier...7555 Relay 12v...1261 Relay 24v...1262 Switch, High Side...1464 608 2013 MEI Corporation
auxiliary heaters TRUCKS BOATS RECREATIONAL VEHICLES These auxiliary heaters are among the most versatile and maintenance free units offered in the industry. Round tube and fin design allows these heaters to mount in any position, using the supplied multi-position leg brackets or flush mount frame. The compact size, simple plumbing and high output are ideal in any application. 10-9800 10-9805 10-9803 AUXILIARY SINGLE FAN REAR EXIT DOUBLE FAN REAR EXIT 5/8 fittings: 5/8 fittings: 10-9800... (12v) 10-9805...(12v) 10-9801... (24v) 10-9806...(24v) 3/4 fittings: 3/4 fittings: 10-9802... (12v) 10-9807...(12v) FLOOR EXIT FLOOR EXIT 5/8 fittings: 5/8 fittings: These auxiliary heaters can be shipped by UPS. AUXILIARY 10-9803... (12v) 10-9808...(12v) SINGLE Fan DOUBLE Fan Air Flow 150 CFM (255 m3/h) 280 CFM (476 m3/h) Capacity 16,000 BTU/Hr @ 150 F 30,000 BTU/Hr @ 100 F (4,032 kcal/h @ 65.6 C) (7,560 kcal/h @ 37.8 C) Current Draw 3.3 amps @ 13.6 VDC 6.6 amps @ 13.6 VDC 1.7 amps @ 27.2 VDC 3.3 amps @ 27.2 VDC Weight 7 lbs. (3 kg) 12 lbs (5.5 kg) 3.75 in. (TYP) 9.52 in. (TYP) 16.02 in. (TYP) 7.25 in. (18.4 cm) 7.25 in. (18.4 cm) 6.45 in. (TYP) DEFROST ADAPTER HOSE OUT- LET (10-9800 SERIES ONLY) 3.5 in. 8800 Heater Hose (50 ft. #5/8 ) 1030 Switch, Toggle 10-0502 3-1/2 Defrost Hose Adapter 2013 MEI Corporation 609
auxiliary heaters TRUCKS BOATS RECREATIONAL VEHICLES These compact series heaters feature high velocity and high performance with three speed motors and scroll blower housings. They deliver maximum BTU s with unsurpassed CFM. A defrost hose adapter is available to make ducting air possible. 10-9830 10-9834 REAR EXIT REAR EXIT FLOOR EXIT 5/8 fittings: 3/4 fittings: 5/8 fittings: 10-9830... (12v) 10-9832...(12v) 10-9834...(12v) 10-9831... (24v) 10-9833...(24v) These auxiliary heaters can be shipped by UPS. AUXILIARY Air Flow...220 CFM (373 m 3 /h) Capacity...20,000 BTU/Hr @ 150 0 F (5,040 kcal/h @ 65.6 0 C) Current Draw...4.3 amps @ 13.6 VDC Weight...7 lbs. (3 kg) SERVICE PART Blower Motor 12v... 3979 1150 Switch Rotary 1272 Control Knob 10-0502 3-1/2 Defrost Hose Adapter AUXILIARY auxiliary DOUBLE BLOWER heater TRUCKS RECREATIONAL VEHICLES REAR EXIT FLOOR EXIT 10-9840... (12v) 10-9842...(12v) 10-9841... (24v) These auxiliary heaters can be shipped by UPS. Air Flow...435 CFM (373 m3/h) Capacity...35,000 BTU/Hr @ 180 F (5,040 kcal/h @ 65.6 C) Current Draw...16 amps @ 13.6 VDC 7 amps @ 27.2 VDC Weight...11 lbs. (3 kg) 1150 Switch Rotary 1272 Control Knob 10-0502 3-1/2 Defrost Hose Adapter 610 2013 MEI Corporation
auxiliary heaters FIRE TRUCKS BUSES VANS Designed to fit in small areas, the 10-9872 delivers a lot of BTU s for it s size. Using a pancake fan design, this unit is quiet and moves close to 200 CFM of air. The 10-9872 has versatile mounting, either flat or horizontal. The 10-9872 s quiet and powerful pancake fan moves almost 200 CFM of air. 5.4 in. (13.8cm) 6.6 in. (16.8cm) 10-9872...12v 7.8 in. (19.7cm) 10.8 in. (27.3cm) AUXILIARY Air Flow...194 CFM (330 m 3 /h) Capacity...22,970 BTU/Hr @ 180 F (5,544 kcal/h @ 82.6 C) Current Draw...4.8 amps @ 13.6 VDC Weight...10 lbs. (4.5 kg) 12.6 in. (32.1cm) 13.4 in. (34.0cm) 5.4 in. (13.8cm) AUXILIARY 2013 MEI Corporation 611
auxiliary heater defrost and oil cooler MARINE USE CONSTRUCTION INDUSTRIAL CABS No other heater offers as many options as the 10-9868. This heater can be used in vehicles with water or air cooled engines (where oil is the heat source.) The compact design, round tube and fin core construction encourage unit mounting in any position while withstanding high operating pressures. The versatile mounting features and defrost attachments are perfect for multi-purpose applications in off-road and construction vehicles. The 10-9868 can also be used as a heat exchanger or oil cooler with it s o-ring hose fittings and high pressure core construction. 10-9868...12v AUXILIARY Air Flow...165 CFM (280 m 3 /h) Capacity...17,800 BTU/Hr @ 100 F (4,486 kcal/h @ 37.8 C) Current Draw...6 amps @ 13.6 VDC 3 amps @27.2 VDC Weight...10.7 lbs. (4.85 kg) AUXILIARY 2659...Straight 5/8 hose 2662...90 5/8 hose Swivel Fittings 10-0512 2-1/2 Defrost Hose Adapter 10-0513 3 Defrost Adapter Blower Motor - 12v...3072 Blower Motor - 24v...3012 Blower Wheel...3655 Heater Core...6954 612 2013 MEI Corporation
auxiliary heater FIRE TRUCKS CRASH & RESCUE VEHICLES LARGE CABS The 10-9870 crew cab heater was designed with high performance to be able to heat larger cabs in extreme conditions. It s low profile and heavy duty construction allows this heater to be used in various applications. AUXILIARY 10-9870...*12v *(Limited Availability) Air Flow...480 CFM (330 m 3 /h) Capacity...49,000 BTU/Hr @ 180 0 F (12,348 kcal/h @ 82.6 0 C) Current Draw...5.9 amps @ 13.6 VDC Weight...28 lbs. (4.5 kg) AUXILIARY Blower Motor - 12v...3977 Blower Wheel (2)...3735 Heater Core...76R-3920 Heater Valve...2282 Knob, Control (temperature)...1271 Knob, Control (fan)...rd-5-8127-0 Resistor, Speed Control...1220 Switch, Rotary 3 speed...1150 2013 MEI Corporation 613
auxiliary heater TRUCKS RECREATIONAL VEHICLES An extremely compact heater the 10-9890 series offers a highly tooled light weight design. There are three optional Snap In outlet configurations available which will allow for various air flow configurations. An additional installation kit which includes mounting hardware and fan switch is also available. 10-9890...*12v 10-9891...*24v *(Limited Availability) Air Flow...140 CFM (237 m 3 /h) Capacity...15,500 BTU/Hr @ 100 F (3,779 kcal/h @ 34.8 C) Current Draw...7.7 amps @ 13.6 VDC Weight...7 lbs. (3 kg) AUXILIARY 10-0520 Installation Kit 10-0521...Straight 2-1/2 10-0522...45 1-3/4 Hose Outlet 10-0523 Louvered Outlet need (2) AUXILIARY 614 2013 MEI Corporation
AUXILIARY HEATERS Quick F ind Ch ar t (Sorted by BTU s) HEATER # BTU s VOLT FAN CFM DINEMSIONS 10-9821 10,000 12v 2 sp 180 6-3/16 H x 11-3/4 W x 8 D 10-9826 12,500 12v 2 sp 150 7 H x 8 W x 3-3/4 D 10-9827 12,500 24v 2 sp 150 7 H x 8 W x 3-3/4 D 10-9815 13,000 12v 2 sp 150 7-1/4 H x 7-1/4 W x 7-1/4 D 10-9828 13,200 12v 2 sp 200 9-7/8 H x 7-3/8 W x 7-1/4 D 10-9829 13,200 24v 2 sp 200 9-7/8 H x 7-3/8 W x 7-1/4 D 10-9844 13,800 12v 2 sp 205 10 H x 7-3/4 W x 4-3/4 D 10-9845 13,800 24v 2 sp 205 10 H x 7-3/4 W x 4-3/4 D 10-9846 14,000 12v var. 210 10-1/2 H x 7-3/4 W x 4-5/16 D 10-9847 14,000 24v var. 210 10-1/2 H x 7-3/4 W x 4-5/16 D HEATER # BTU s VOLT FAN CFM DINEMSIONS 10-9848 14,000 12v var. 210 10-1/2 H x 7-3/4 W x 5 D 10-9849 14,000 24v var. 210 10-1/2 H x 7-3/4 W x 5 D 10-9825 21,715 24v 2 sp 210 4-3/4 H x 11-7/16 W x 11-1/2 D 10-9816 25,000 12v 2 sp 250 8-1/4 H x 8-1/4 W x 8-1/4 D 10-9817 25,000 24v 2 sp 250 8-1/4 H x 8-1/4 W x 8-1/4 D 10-9819 29,380 12v 2 sp 244 8-1/4 H x 8-1/8 W x 9 D 10-9822 33,000 12v 3 dbl 275 5-1/4 H x 16 W x 8 D 10-9824 33,000 12v 2 sp 350 10 H x 16 W x 5-1/4 D 10-9823 34,054 12v 2 sp 265 9-3/16 H x 9-3/16 W x 9-1/2 D 10-9820 39,174 12v 2 sp 375 9-3/4 H x 14-3/4 W x 9-1/2 D 10-9818 60,000 12v 2 dbl 500 9 H x 20-1/4 W x 9-1/2 D AUXILIARY 10-9815 CAB HEATER Height Width Depth 7-1/4 x 7-1/4 x 7-1/4 BTU/HR...13,000 CFM... 150 Amp Draw High...5 Volt... 12 Speed...2 Weight... 10 lbs air flow This compact heater is very popular in small cab applications. Hose collars can be added when window defrosting is required. Stud mounts make this unit good for inside firewall mounting. 10-9816...12v 10-9817...24v CAB HEATER Height Width Depth 8-1/4 x 8-1/4 x 8-1/4 BTU/HR...25,000 CFM... 250 Amp Draw High...5 Volt... 12 Amp Draw High...2.5 Volt... 24 Speed...2 Weight... 12 lbs This heater is popular in small cab applications when a higher output heater is called for. Hose collars can be added when window defrosting is required. Stud mounts make this unit good for inside firewall mounting. air flow AUXILIARY 10-9818 UNDER SEAT HEATER Height Width Depth 9 x 20-1/4 x 9-1/2 BTU/HR...60,000 CFM... 500 Amp Draw High...16 Volt... 12 Speed (double)...2 Weight... 24 lbs air flow 10-9819 CAB HEATER Height Width Depth 8-1/4 x 8-1/8 x 9 BTU/HR...29,380 CFM... 244 Amp Draw High...10 Volt... 12 Speed...2 Weight... 13 lbs air flow This powerful twin fan underseat heater delivers full 60,000 BTU s. An ideal underseat bus heater. 10-9820 UNDER SEAT HEATER Height Width Depth 9-3/4 x 14-3/4 x 9-1/2 BTU/HR...39,174 CFM... 375 Amp Draw High...10 Volt... 12 Speed...2 Weight... 20 lbs This rugged unit provides excellent heating for the small bus, truck body and R.V. industries. 10-9821 STEPWELL HEATER with Faceplate Height Width Depth 6-3/16 x 11-3/4 x 8 BTU/HR...10,000 CFM... 180 Amp Draw High...5 Volt... 12 Speed...2 Weight... 10 lbs air flow This durable auxiliary heater provides a full 40,000 BTU heating ideal for buses, larger van bodies and heavy equipment. This versatile, compact unit delivers heat in a variety of applications from bus stepwell to off highway space heating. Built of heavy gage precoated steel and powder coat finished to hold up to the elements. Mounting provisions on both sides assure maximum installation flexibility. 2013 MEI Corporation 615
AUXILIARY HEATERS 10-9822 UNDER SEAT HEATER Height Width Depth 5-1/4 x 16 x 8 BTU/HR...33,000 CFM... 275 Amp Draw High...14 Volt... 12 Speed (double)...3 Weight... 12 lbs 10-9823 UNDER SEAT HEATER Height Width Depth 9-3/16 x 9-3/16 x 9-1/2 BTU/HR...34,054 CFM... 265 Amp Draw High...10 Volt... 12 Speed...2 Weight... 15 lbs air flow air flow A heavy duty twin blower auxiliary heater designed for use in ambulances, rescue vehicles and heavy equipment. A high output auxiliary heater for use as a rear van body heater and a bus underseat heater. AUXILIARY 10-9824 HEATER / DEFROSTER Height Width Depth 5-1/4 x 16 x 10 BTU/HR...33,000 CFM... 350 Amp Draw High...14 Volt... 12 Speed...3 Weight... 14 lbs air flow Used in small cabs, this rugged unit provides a door for heat and two 2-1/2 inch collars for either defogging or remote heat runs. 10-9825 FLOOR / WALL HEATER Height Width Depth 4-3/4 x 11-7/16 x 11-1/2 BTU/HR...21,715 CFM... 210 Amp Draw High... - Volt... 24 Speed...2 air flow Air enters through the top and exhaust out each side or be reversed. Includes 3 position switch, mounting nuts, wiring diagram and installation instructions. AUXILIARY 10-9826...12v 10-9827...24v UNDER SEAT HEATER Height Width Depth 7 x 7 x 3-3/4 BTU/HR...12,500 CFM...150 Amp Draw High... - Speed...2 air flow 10-9828...12v 10-9829...24v UNIVERSAL FLOOR MOUNT Height Width Depth 9-7/8 x 7-3/8 x 7-1/4 BTU/HR...13,200 CFM... 200 Amps...6.0 Volt... 12 Amps...3.0 Volt... 24 Speed...2 Switch...Rocker (built in) Fully rotational in 90 increments by switching core tube locations. Includes 3 position switch, mounting nuts, wiring diagram and installation instructions. 10-9844...12v 10-9845...24v SIDE MOUNT HEATER Height Width Depth Mntg Brkt 10 x 7-3/4 x 2-7/16 4-3/4 BTU/HR...13,800 CFM... 205 Amps...2.7 Volt... 12 Amps...1.3 Volt... 24 Speed...2 air flow Tube & Fin, 5/8 Fittings, 2 speed Rocker Switch required. Inline Shut off Valve for temperature control. Heater Hose Kit not included. Tube & Fin, 5/8 Fittings, Adjustable Airflow Louvers, Heater Housing is plastic/nylon. Mounting Hardware included. 10-9846...12v 10-9847...24v FLOOR MOUNT HEATER Height Width Depth 10-1/2 x 7-3/4 x 4-5/16 BTU/HR...14,000 CFM... 210 Amps...2.7 Volt... 12 Amps...1.3 Volt... 24 Speed... variable Switch...Rheostat (built in) air flow Tube & Fin, 5/8 Fittings, Inline Shut off Valve for temperature control. air flow 616 2013 MEI Corporation
AUXILIARY HEATERS 10-9848...12v 10-9849...24v UNIVERSAL WALL MOUNT Height Width Depth Mntg Brkt 10-1/2 x 7-3/4 x 2-5/8 5.0 BTU/HR...14,000 CFM... 210 Amps...2.7 Volt... 12 Amps...1.3 Volt... 24 Speed... variable Switch...Rheostat (built in) air flow Tube & Fin, 5/8 Fittings. Inline Shut off Valve for temperature control. Heater Hose Kit not included. ELECTRIC DC HEATERS AUXILIARY Brushless 50,000hr. Fan Infra-Red Quartz Recirculating Forced Air (Cab) Heaters INSTANT HEAT Automotive Off-Road Equipment Industrial Golf Cars Marine S.T.C. Aircraft* *Special Order Only on Certified Aircraft U.S.A. MANUFACTURED SAFE and EFFICIENT DEPENDABLE F.A.A. APPROVED ALUMINUM CASE ODORLESS 10,000 hr. ELEMENT (thermally protected) AUXILIARY As a general rule, alternator must have at least 15 more amps than the heater (example: 10-9854A requires a minimum 45 amp alternator). AUTOMOTIVE, OFF-ROAD, INDUSTRIAL, GOLF, MARINE & S.T.C. AIRCRAFT (12v-24v) PART # DESCRIPTION VOLTS (1) DIMENSIONS AMPS* WATTS BTU S 10-9850A DC Electric Htr 12 4 H x 5 W x 6 D 30 360 6012 10-9853A DC Electric Htr 12 4 H x 5 W x 6 D 40 480 8016 10-9855A DC Electric Htr 12 4 H x 5 W x 6 D 50 600 10,020 10-9851A DC Electric Htr 24 4 H x 5 W x 6 D 25 600 10,020 10-9852A DC Electric Htr 24 4 H x 5 W x 6 D 35 840 14,028 10-9854A DC Electric Htr 24 4 H x 5 W x 6 D 45 1080 18,036 NOTES: (1) 12v nominal voltage = 14.2 alternator voltage / 24v nominal voltage = 28 alternator voltage Heaters are hard-wired into electrical system (uses 30 or 40 amp fuse). Supplied with mounting bracket, hardware, and fuse. Heaters equipped with High/Low/Off switch on side (can be operated from dash with a push/pull switch). Heaters can be used on FAA approved S.T.C. aircraft (field approval form #337 required). By design, the airflow on these heaters is not as strong as the airflow on the vehicle s O.E. heater. The infrared heat warms exposed flesh, not the air. The convective flow of heat warms the air in the vehicle. 2013 MEI Corporation 617
School, Shuttle and Transit EVAPORATOR CEILING MOUNT 35,000 BTU Manufactured for the transportation industry, the 10-9335 evaporator is designed for free-blow ceiling mount applications. Available in rear, side, or forward mount (must specify when ordering). FEATURES Enhanced Performance, Serviceability, and Ease of Installation Unique Louver Design Enhances Airflow Low Profile Design for Additional Passenger Headroom Super High Blower Speed Drain Pan Construction Eliminates Condensation Problems Return Air Thermostat Maximizes Comfort Level Pressure Switches for Maximum Compressor Protection Enhanced Copper Tubed and Finned Coil Increases System Performance School, Shuttle, Transit 10-9335...Rear/Front 10-9335S...Side Air Flow...700 CFM (1186 m3/hr) Amperage Draw...15 Amps @ 13.5 Volts Due to size and weight, this unit must be shipped by LTL Carrier. UPS (s) Control Panel# 10-0063 Engine Compressor Bracket Kit Hose Kit Condenser(s) 22-1/2 27-1/2 6-7/8 9-1/2 School, Shuttle, Transit Cooling Capacity...35,000 Btu/Hr (8,821 kcal) Filter...Cleanable Aluminum Mesh 1/2 Dia. Mtg. Hole (4 places) Mounting Holes...1/2 Dia. (4 Places) Voltage...12v 4-3/4 7-1/4 29-3/8 Weight...37 lbs. 9-1/8 9-5/8 - Specify When Ordering Air Outlet Louvers...Adjustable or Fixed Cover...Grey, White or Beige Mounting Position...Rear, Side, or Forward #10-0063 Control Panel Call Our Customer Service Toll-free Number for Assistance. 618 2013 MEI Corporation
School, Shuttle and Transit EVAPORATOR CEILING MOUNT 43,000 and 55,000 BTU A/C & HEATER UNITS Manufactured for the transportation industry, the 10-9335 evaporator is designed for free-blow ceiling mount applications. Available in rear, side, or forward mount (must specify when ordering). FEATURES Enhanced Performance, Serviceability, and Ease of Installation Unique Louver Design Enhances Airflow Low Profile Design for Additional Passenger Headroom Super High Blower Speed Drain Pan Construction Eliminates Condensation Problems Return Air Thermostat Maximizes Comfort Level Pressure Switches for Maximum Compressor Protection Enhanced Copper Tubed and Finned Coil Increases System Performance (s) Control Panel# 10-0063 Engine Compressor Bracket Kit Hose Kit Condenser(s) - Specify When Ordering Air Outlet Louvers...Adjustable or Fixed Cover...Grey, White or Beige Mounting Position...Rear, Side, or Forward #10-0063 Control Panel School, Shuttle, Transit 10-9343...Rear/Front 10-9343S...Side Air Flow...800 CFM (1356 m3/hr) Amperage Draw...9 Amps @ 13.5 Volts Cooling Capacity...43,000 Btu/Hr (10,836 kcal) Filter...Cleanable Aluminum Mesh UPS Due to size and weight, this unit must be shipped by LTL Carrier. 22-1/8 1/2 Dia Mtg Hole (6 Places) 41-1/4 39-5/8 7.0 4-3/4 9-1/2 School, Shuttle, Transit Mounting Holes...1/2 Dia. (6 Places) Voltage...12v Weight...61 lbs. 9-3/4 10-9355...Rear/Front 10-9355S...Side UPS Due to size and weight, this unit must be shipped by LTL Carrier. 41-1/4 Air Flow...1600 CFM (2712 m3/hr) 7.0 Amperage Draw...18 Amps @ 13.5 Volts Cooling Capacity...55,000 Btu/Hr (13,860 kcal) Filter...Cleanable Aluminum Mesh 22-1/8 39-5/8 1/2 Dia Mtg Hole (5 Places) 4-3/4 9-1/2 Mounting Holes...1/2 Dia. (5 Places) Voltage...12v Weight...67 lbs. 7-1/4 9-3/4 2013 MEI Corporation 619
School, Shuttle and Transit CONDENSER SKIRT MOUNT 60,000 and 82,000 BTU Manufactured for the transportation industry, the 10-9382 and 10-9383 condensers are designed for skirt mount applications. FEATURES Low Profile, High Grade Lightweight Aluminum Construction Enhanced Performance, Serviceability, and Ease of Installation Integral Sightglass/Filter Drier (16 cu. in.) Superior Heat Rejection Resulting In: -- Lower Evap. Temperature -- Lower Head Pressure 12 Electric Fans for Increased Airflow Sealed Motor Design for Long Life Enhanced Rifled Tubing Increases System Performance Call Our Customer Service Toll-free Number for Assistance. School, Shuttle, Transit 10-9382 Air Flow...1850 CFM (3136 m3/hr) Amperage Draw...23 Amps @ 13.5 Volts Cooling Capacity...60,000 Btu/Hr (15,120 kcal) Condenser Fans...12 Diameter, Sealed Motor UPS Due to size and weight, this unit must be shipped by LTL Carrier. 3-1/2 7/16 x 3/4 Mtg Slot (6 Places) 1.0 6-7/8 13-3/4 15-3/4 School, Shuttle, Transit Filter Drier/Sight Glass...16 Cubic Inch Mounting Slots...7/16 x 3/4 Dia. (6 Places) Voltage...12v Weight...42 lbs. 39.0 36-3/8 10-3/8 10-9383 UPS Due to size and weight, this unit must be shipped by LTL Carrier. Air Flow... 2775 CFM (4703 m3/hr) Amperage Draw... 32 Amps @ 13.5 Volts Cooling Capacity... 80,000 Btu/Hr (19,657 kcal) Condenser Fans... 12 Diameter, Sealed Motor Filter Drier/Sight Glass... 16 Cubic Inch Mounting Slots... 7/16 x 3/4 Dia. (6 Places) Voltage... 12v Weight... 56 lbs. 7/16 x 3/4 Mtg Slot (6 Places) 49-1/2 51.0 48-3/8 1.0 6-7/8 15-3/4 15-3/4 13-3/4 10-3/8 620 2013 MEI Corporation