idware Idware Remote Site Monitoring Solution

idware Idware Remote Site Monitoring Solution

2 TOPIC 1. Why a Remote Site Monitoring solution is mandatory for a TELCO? 2. Remote Site Monitoring features a) Power monitoring b) Security Monitoring c) Environment Monitoring d) Equipment Monitoring 3. Remote Site Monitoring Solution a) Technical solution b) Connectivity c) TIMOS Site Management Software d) Sensors

3 THE AIM Almost all the BTS sites are remote and unstaffed. To face this fact in a high competition context, Telco s must: Reduce OPEX Optimize CAPEX Protect investments Increase revenues Idware Remote Site Monitoring Solution meets this need

IDWARE SOLUTION HELPS YOU To reduce OPEX With less truck rolls With less inefficient visits With less scheduled visits With a better efficiency of the maintenance staff management To optimize CAPEX With a real time equipment monitoring With a smart power management Mains, Solar, Fuel generator Extending battery life cycle With a smart environment management to prevent equipment deterioration To protect investments from malicious intrusion and theft By site controlled access By intrusion detection By a fuel level follow up By watching cables, solar panels, from bad operation condition, thanks to a real time environment monitoring Temperature & humidity Detection of water leakage, smoke, fire To increase revenues With a higher network availability By optimizing Time Before Repair With a highest up type of QoS By preventing failures With a better customer satisfaction 4

5 SITE MONITORING FEATURES POWER Monitoring AC Main DC Current & voltage Battery charge & discharge Fuel Generator Hybrid Generator Solar & wind generator SECURITY Monitoring Door, windows intrusion Solar panel theft Fuel theft Motion detection Tower Lights RFID Card Reader Access IP Video camera ENVIRONMENT Monitoring Temperature/Humidity Smoke Water Airflow HVAC idware Idware Remote Site Monitoring Solution September 2012

6 POWER MONITORING 3-PHASE CURRENT: Mains, Generator Per phase: Real Power, Tension, Current Total Real Power Average Tension Average Current Average Value since the last Reset Total Real Power Average Tension Average Current Frequency 1-PHASE CURRENT: Mains, Electric loads Tension Current Current detection (ON/OFF status) DC CURRENT: Batteries, Rectifier Tension Current Current detection FOR EACH MEASUREMENT OR VALUE 4 thresholds Very low Low High Very high FOR EACH THRESHOLD ONE OR MORE ACTIONS SNMP Trap TCP message email SMS Relay Script

7 SECURITY MONITORING ACCES CONTROL Site, Building, Shelter Door access strike Remote lock/unlock RFID Card Reader Grant/Deny access, in combination with the electronic door strike INTRUSION Motion Detector Alarm when true motion detection Door-Windows sensor kit Alarm when opening detection IP camera Video clip or pictures transmission (*) Video clip recording (*) depending on the transmission rate FUEL THEFT Tank lid Alarm when open Fuel consumption Real time volume Consumption and refill follow up FOR EACH ALARM ONE OR MORE ACTIONS SNMP Trap TCP message email SMS Siren Siren Strobe Relay Script

8 ENVIRONMENT MONITORING TEMPERATURE SENSOR Real time measurement HUMIDITY SENSOR Real time measurement TEMPERATURE-HUMIDITY SENSOR Real time measurement SMOKE-FIRE SENSOR Alarm when detection of smoke or fire WATER SENSOR Alarm when detection of water or leakage AIR-FLOW SENSOR Indicates if a fan works or not Combined with the AC detector, it determines the origin of the AC failure FOR EACH MEASUREMENT 4 thresholds Very low Low High Very high FOR EACH THRESHOLD OR ALARM ONE OR MORE ACTIONS SNMP Trap TCP message email SMS Relay Script

9 EQUIPMENT MONITORING EQUIPMENT HAVING REMOTE MONITORING FEATURES FUEL GENERATOR Most of new products have a remote monitoring option Example: CUMMINS fuel generator Remote ON/OFF from the NOC Measurement Running hours Oil pressure Cooling temperature Engine speed Current frequency Control battery voltage SWITCH -ROUTER Such kind of equipment is Web Configurable HTTP compatible Remote control could be done through SiteBoss SMART POWER MANAGEMENT A site having several power supplies (mains, fuel, solar, wind, batteries) could get advantage of a smart power management, saving costs and extending equipment life. A script, based on measurements and defined thresholds must be written belongs requirements. Any device which has an Internet or a serial port, using a standard protocol (TCP, MODBUS, ) could be integrated into the global remote monitoring system. Just a script, based on the manufacturer specifications, must bewritten.

IDWARE SOLUTION A smart SiteBoss per site SiteBoss 450 SiteBoss 550 SiteBoss 571 Scripting capabilities Various Input / Output A full range of Sensors Power Sensors 3-Phases AC Single phase AC DC Security Sensors Analog sensor Environmental Sensors TIMOS Site Management Software Quite ready and easy to use Open for customization A full range of connectivity with equipments Ethernet SNMP TCP FTP Serial (RS232 RS 485) MODBUS TL1 TBOS Contact closure (dry contact) Current (4-20 ma DC) Voltage (-60 V / +60V DC) A full range of connectivity with NOC & staff on the field Wire and wireless Networks INTRANET (LAN, VLAN) ADSL EDGE Protocols SNMP, TCP, FTP, HTTP SMTP, Email SMS 10

11 CONNECTIVITY

SITEBOSS WEB CONFIGURATOR 12 Status General Networking Serial Security Events Actions Logs Scripting

TIMOS SITE MANAGER SITE DISPLAY 13

3-PHASE AC MONITORING 14

EQUIPMENT REMOTE ON/OFF SWITCHING 15

16 SiteBoss 450 TM Remote Site Controller ideal use for BTS sites Powerful Linux based unit Web configurable, autonomous, major standard protocols, full SNMP,. Security: local or using RADIUS, VLAN, Scripting to combine different events for a better default understanding TIMOS Site Manager to manage the whole network (powerful, modular, open, easy to use) Connectivity External: 1 Ethernet, 1 GPRS-EDGE (optional) Internal: 1 Ethernet, 2 Serial RS232 -RS 485, 4 EventSensor ports to extend connectivity 2 Versions Version 1 : Contact expansion 10 C (10 contact) Version 2 : Mixed expansion 4 C (contact); 2 V (Analog voltage), 1 M (analog current), 3 R (relays ) 2 Options Option 1 : EDGE modem internal expansion card Option 2 : -48 V DC power supply & output voltages, +24, +15, -15 and +12 Volts DC

17 SiteBoss 550 2 RS232 ports & 2 Ethernet ports 6 expansion card slots Various I/O expansion cards Support up to 16 serial ports Support up to 48 I/O points Contact, DC Voltage, DC current, relay EDGE or ADSL modem options Monitor up to 1000 serial alarm messages LUA Scripting language Powerful Remote Monitoring for medium & big sites Receive and convert SNMP traps into text alarms Access network devices via dialup PPP Fallback to dialup alarms if the Ethernet connection fails Web interface for easy configuration Interfaces to SitePathSecure Remote Management System Advanced security (SSH V2, SFTP, Radius) Optional internal run-time battery backup VLAN support SNMPv3 Sets, Gets & Traps support

18 SiteBoss 571 TM Active Remote Monitoring use for Base Transceiver Stations Powerful Linux based unit Web configurable, autonomous, major standard protocols, full SNMP,. Security: local or using RADIUS, VLAN, Scripting to combine different events for a better default understanding Compatible with any SNMP element manager (NAGIOS, HP OV, TIMOS, ) Complete connectivity with I/O Contact closure, Serial RS232 - RS 485, analog (DC current and voltage) Ethernet, ADSL, GPRS-EDGE Alerts and alarms via email and-or SMS Smart Power Distribution Unit High power relays (500 W) DC Re-Boot, Load-Shedding upon event (Main Power Loss), Graceful Power-up Optional AISG controller Antenna Tilt

POWER MONITORING EVENT SENSORS 19 3 PHASES AC POWER AC Power Analyzer AC Power Analyzer Solid-Core Current Transformer Split-Core Current Transformer SINGLE PHASE AC POWER AC Current Transducer AC Voltage Transducer Current detector DC POWER DC Current Transformer DC Voltage input Event Sensor unit DC Voltage input expansion card

3-PHASE AC POWER SCHEMATICS 20

SECURITY EVENT SENSORS 21 IP Camera Siren/Strobe Siren, Indoor Siren, Outdoor RFID Card Reader Motion Alarm Door access strike Door-Window-Panel sensor kit Fuel tank sensor ultrasonic or pressure-based

ENVIRONMENT EVENT SENSORS 22 Temperature/Humidity Sensor Water sensor Smoke Fire alarm Air flow sensor Hardened Sensor for Indoor or Outdoor Use Standard RJ45 Jack

CONTACT INFORMATION 23 For more information, please contact idware 5 rue de l'orangerie 92190 Meudon FRANCE Email: asentria@idware.fr www.idware.fr Phone : +33 6 62 52 32 22