CBRNE solutions to safeguard society www.smithsdetection.com
Protect against CBRNE threats and save lives Government bodies and militaries around the world all face the challenge of protecting themselves and society at large against the consequences of a chemical, biological, radiological, nuclear and explosives (CBRNE) attack. Terrorism poses a real threat to our security and the safety of troops, civilians and critical infrastructure. It has never been more important than now to be able to trust the product in your hand to detect and identify suspicious substances to respond to a CBRNE threat as quickly as possible. It is paramount that militaries and security agencies are equipped with the correct solutions that enable them to carry out their mission as safely as possible. Our products incorporate the latest technologies combined with simple, intuitive interfaces that make it easy for the user to operate in times of pressure, where reliable, rapid results are needed to make quick decisions. Around the clock, around the world we provide the capability to protect people, infrastructure, civil and military facilities from wide-ranging CBRNE threats.
Take out the guess-work In any CBRNE incident it is impossible to positively identify potentially dangerous substances such as vapours, powders, gases, liquids, pastes and gels using senses such as sight and smell. The need to have confidence in a product that provides fast, accurate results, in a major CBRNE incident is as important as your respirator. Survivability is key under CBRNE threat environments. Early warning alerts can save lives and allow users to operate without restrictive, full protective equipment. Our complete CBRNE solutions utilise innovative technologies that take the guess-work out of identifying dangerous substances. All our products are tested rigorously to be certified to CE and MIL-STD 810 standards, to ensure their suitability for harsh conditions and high temperatures likely to be faced during operations in battlefield and security conditions. Our science and technology specialists understand that soldiers need the latest technology in rugged products which minimize inconvenience and allow them to carry out successful missions in the field. That s why Smiths Detection is dedicated to continually developing products that are intuitive, smaller, lightweight and simple to use. Increase survivability under CBRNE threat environments.
Our comprehensive range of product solutions meet a wide variety of requirements for the detection and identification of CBRNE threats. TRACE-PRO EXP IMS Small hand-held, non-radioactive, trace explosive detector utilises IMS technology. It incorporates a remarkable integrated evidence collection that features time/date stamp, complete alarm data, photograph, GPS coordinates and system health. An added benefit is the fastest clear down time for any IMS detector. HazMatID 360 CWA TIC EXP NARC FTIR With its remarkable accuracy to identify complex or contaminated mixtures of solid and/or liquid chemicals, the HazMatID can rapidly analyse threats found in the field in less than 2 minutes. Its wireless capability allows immediate data transmission back to the command post to aid critical decision making. HazMatID Elite CWA TIC EXP NARC FTIR This smart hand-held solid and liquid chemical identifier utilises Fourier-Transform Infrared Spectroscopy (FT-IR) to determine the identity of unknown chemicals in solid and liquid forms. It performs analysis in 1 minute or less through its ATR diamond sensor and has long-range, embedded RF wireless transmission for the soldier in the hotzone who needs to communicate data back the command post. An optional ClearSampler accessory further enhances the sensitivity of this product for decon verification, explosive analysis and hazardous materials assessment. LCD 3.3 CWA TIC IMS Is our most versatile product for chemical agent detection with its ability to suit a broad range of requirements of a soldier or operational groups. The LCD 3.3 detects a range of chemical warfare agents (CWAs) and Toxic Industrial Chemicals (TICs) using our advanced, proven IMS technology. By adding different accessories, the LCD 3.3 can be transformed to suit various roles in theatre such as personal protection, vehicle integration or unmanned ground vehicles. It can also be used in a UAV application.
GasID CWA TIC FTIR This easy to use gas analyzer utilises Fourier-Transform Infrared Spectroscopy (FTIR) to identify over 5,500 gases within minutes. The Gas-ID is suitable for response teams who need to know what they are dealing with when faced with potentially toxic gases. IONSCAN 600 EXP IMS IONSCAN 600 is a portable desktop system used to detect and identify trace amounts of explosives. This non-radioactive system is portable which means it is very versatile to suit your needs for screening baggage, packages, or personnel for explosives, whether at a fixed base or in remote locations. ACE-ID CWA TIC EXP NARC RAMAN Rapid results in seconds, in just one hand. ACE-ID is a non-contact explosives identifier suitable for solids, liquids, gels and powders. These materials can be identified through translucent and semi-translucent containers such as plastic and glass and is ruggedized for use in severe climates. The ACE-ID would suit explosive ordinance disposal technicians, civilian bomb squads and hazmat teams. GUARDION CWA TIC EXP NARC GC/MS Our field-portable chemical identifier and mixture analysis system utilises Gas Chromatography/Mass Spectrometry (GC/MS) technology to identify volatile and semi-volatile organic compounds including CWAs and TICs. Considered the gold standard for chemical identification, GUARDION can identify single or multiple substances in trace quantities that can go undetected by other technologies. MMTD CWA TIC EXP NARC IMS If your need is to detect and identify a broad range of threats from one system, the MMTD is a rugged, hand-held detector that identifies explosives, narcotics, TICs and CWAs from one single sample. It s tough exterior is designed for the soldier on the frontline who needs a portable threat detector in the field. Its remote, unattended operation capability via Wi-Fi or Ethernet enables the user to connect multiple units to monitor the status and alarms from each unit.
SABRE 5000 CWA TIC EXP NARC IMS Optimsed to detect peroxides used in home-made explosive devices in vapour mode, the SABRE 5000 also detects trace particles of narcotics, CWAs and TICs. It utilises Ion Mobility Spectrometry (IMS) and can detect and identify over 40 threat substances in approximately 20 seconds. NIDS BACTERIA TOXINS IMMUNO Take the guesswork out of interpreting handheld assay results by using the NIDS (Nano Intelligent Detection System) which utilises immunoassay technology to confirm the identity of 10 bio agents and simulants in less than 15 minutes. RadSeeker CS/CL/CS-G GAMMA NEUTRON RAD With its superior identification capabilities, RadSeeker removes the guess work from the operator by detecting and identifying masked nuclear threat materials and assessing the source found, to provide a risk assessment describing the source as innocent or a threat. BioCheck 20/20 PROTEIN PH DYES This highly sensitive powder screening kit indicates the presence of protein which is found in nearly all BWA microbes and bio-toxins. It acts quickly with the substance found giving a purple colour in the presence of protein. Used in conjunction with the HazMatID it rules out possible presence of BWAs in suspicious powder situations. PrimeAlert DNA RNA FLUOR GID-3 CWA TIC IMS Most widely deployed chemical warfare agent detector is easy to use, rugged and battle proven. Its versatility means it is ideal for air and chemical hazard monitoring in vehicles or used as a point detector. Engineered to detect the presence of potentially life-threatening biological microbes and biotoxins, the PrimeAlert is a versatile product which is easy to use. Its microbe screen tests for the presence of significant quantities of bacteria, bacterial spores and most viruses.
Training and Service Smiths Detection provides complete training on all desktop, hand-held trace, chemical and biological detectors. Our products are built using advanced technology and designed for ease of operation. Acquiring the skills to effectively operate and maintain Smiths Detection products in the field ensures that your products are being used properly and to their full detection capability. Training instructors are certified and employ both classroom presentations and hands-on training to help students become competent users of Smiths Detection equipment. Class sizes are small, allowing for discussion and a high level of interactivity. Depending on the user s needs, training can be conducted at your facility or at one of Smiths Detection s facilities. Our Service Contract solutions are costeffective programs designed to eliminate unplanned maintenance and emergency repair expense and minimize unexpected downtime. All our hand-held products come with one year standard warranty cover which can be upgraded to suit your needs and requirements. Cost-effective service contracts designed to minimize unexpected down-time
ABOUT SMITHS DETECTION Smiths Detection offers advanced security solutions in civil and military markets worldwide, developing and manufacturing government-regulated technology products that help detect and identify explosives, chemical and biological agents, radiological and nuclear threats, weapons, narcotics and contraband. For product information, sales or service, please go to www.smithsdetection.com XXXXXX is a trademark of Smiths Detection Group Ltd.