PANIC EXIT HARDWARE DX-200 Serie
Explanation of European tandard The tandard EN 1125 and EN 179 were created at the European level with the acceptance and cooperation of the Dutch tandard committee. The central objective i to give a afe and eective ecape route through a doorway. Thee tandard tate that door equipped with panic or emergency exit device mut be able to be opened with a ingle action. The tandard alo determine the requirement for panic device in conjunction with puh and pull tet, corroion reitance and durability tet. Panic exit: tandard EN 1125 Thi tandard decribe the minimum requirement with regard to ecape route door in public building. Typical application include: bar, librarie, theatre, hop, chool, hopital cinema, etc. Main requirement: The ecape route door mut be fitted with a horizontal crobar or touchbar that cover at leat 60% of the door width. The required opening preure may not be higher than 8 kg. The weight of the door may not exceed 200 kg. The height of the door may not exceed 2500 mm. The width of the door may not exceed 1300 mm. IMPORTANT The crobar mut never project pat the edge of the door. Thi form an obtacle for people trying to ecape or trying to help, a clothing or fire equipment may become nagged on them. Emergency exit: tandard EN 179 Thi tandard decribe the minimum requirement for emergency door in building with limited acce. Thi can include apartment building, oice, torage pace or boiler room. Panic device according to thi tandard are not uitable for application in area that are freely acceible to the public. Thee device are intended only for area where people already have prior knowledge of it operation and know the ecape route. Main requirement: The door may be fitted with a lever handle or a puh pad The required opening preure may not be higher than 8 kg. The weight of the door may not exceed 200 kg. The height of the door may not exceed 2500 mm. The width of the door may not exceed 1300 mm. IMPORTANT When in doubt we recommend that you contact u. It i bet to alway chooe a olution that i in conformity with the tandard EN 1125. You will then be opting for the afe option with repect to your adviory function. In thi context, alo be aware of product liability and do not heitate to give a clear advice to your cutomer.
CE marking: Thi product complie with legal regulation With a CE certification the producer how that the product meet the requirement for afety, health, the environment and conumer protection. Thee requirement complement valid EU guideline. Tet certificate Tet certificate mut be available for inpection at all time. They are a part of an on-going monitoring proce and may never be older than 12 month. Approved tet Product are regularly teted at a UKAS- approved company, like Warrington APT Laboratorie Ltd. in the UK. The DX panic exit hardware i alo teted here. ISO 9000 DX panic device are manufactured by an ISO 9000-certified organiation. 3 (3) 7 (6/7) 6 (5-7) 0 (0/A/B) 1 (1) 3 (3/4) Category of ue 3 = high frequency of ue by public and other with little incentive to exercie care. Durability 6 = 100.000 cycle 7 = 200.000 cycle Door ize/ma 5 = door up to 100 kg 6 = door up to 200 kg 7 = door over 200 kg Fire Reitance (EN 1634) 0 = not approved for fire/moke door ue A = approved for moke door aemblie B = approved for ue on fire & moke door aemblie Safety 1 = All panic and emergency device have a critical afety function therefore only grade 1 i identified Corroion Reitance (EN 1670) 3 = high 4 = very high 2 (2-5) 2 (1/2) Security - EN 1125 : 2 = 1000N - EN 179 : 2 = 1000N 3 = 2000N 4 = 3000N 5 = 5000N Ditance from the bar or pad to the door face 1 = up to max. 150mm 2 = up to max. 100mm A (A/B) Type of operation - EN 1125 : A = puch bar B = touch bar - EN 179 : B = puh pad A (A-C) Field of Door Application (outward) A = Single/Double door - active of inactive leaf B = Single door only C = Double door only - inactive leaf only
Panic Exit Hardware DX 200 Serie The development of the DX 200 erie ha been baed on the following criteria: The European tandard EN 1125 and EN 179 CE marking Contemporary deign Uer-friendly acceorie Competitive pricing Eay mounting Thee erie cover a wide range of panic bar, puh pad and kit for double door. The wide range of acceorie oer a fitting olution for any ituation. Supplied in clearly colour-coded packaging and with mounting intruction. Uer-friendline and eay aembly and mounting are key feature of thee erie. The aortment of panic device i delivered a tandard in either of 2 finihe: the red/black combination prized by architect or ilver. All of the panic lock and acceorie in thi brochure are deliverable from tock.
Panic exit hardware in accordance with tandard EN 1125 The mot important element to conider when deigning panic exit hardware i the people inide a building in an emergency ituation. In ituation where there i no prior knowledge of the operation and location of the panic device or when there i free public acce to a building, panic device hould be placed in accordance with EN 1125. The panic exit hardware illutrated on thi page (ecape exit door) complie with thi tandard. DX PO 294 EB Vertical double panic bolt. Two-point locking mechanim in the upper and lower frame. Anti-burglary device againt unauthoried releae of the latch. For ue on ingle and double door. For ue on left and right-handed door. Suitable for door up to 2440 mm tall and 1220 mm wide. Optional feature: Alarm et PO AS 304 Endbox with alarm witch PO EKM 294 Dogging device PO VZM V Supplied with an eay to clean ocket for the bottom latch in the threhold. DX PO 296 EB Rim panic latch. For ue on ingle door and on the firt-opening door of a double door ituation. For ue on left and righthanded door, the latch can be revered. Suitable for door up to 1220 mm wide. Option: Endbox with alarm witch PO EKM 294 DX PO 285 DB Complete panic exit hardware kit for double door, coniting of 3 component (illutrated on the inet in the larger picture) PO 294 EB (puh bar) PO 296 EB (puh bar) PO SK DD (ocket) DX PO 305 EB With mortice panic nightlatch. Mortie panic lock with latch bolt. Backet ize: 55 mm. PC ize: 35 mm. Suitable for half Euro profile cylinder (not included). For ue on ingle door and on the firt-opening door of a double door ituation. For ue on left and righthanded door, the latch can be revered. Suitable for door up to 1220 mm wide. Option: End cae with alarm witch PO EKM 294 NOT applicable in combination with a knob and leveret Only applicable in combination with PO 902 and PO 904. We advice to place a lever and a roette on the outer ide of the door. Thi will prevent the door from being opened by pulling the key.
Application guide for panic hardware APPLICATION 1 APPLICATION 2 APPLICATION 3 PO 296 PO 305 PO 294 APPLICATION 4 APPLICATION 5 APPLICATION 6 PO 294 PO 294 PLAIN MEETING STILES PO 305 PO 294 PO 285 COMPLEET DOUBLE DOORS WITH MOULDING OR MEETING STILE Left handed ISO. 5.0 (DIN right) Right handed ISO. 6.0 (DIN left) Symbol for the door that open firt (1t opening leaf).
Panic exit hardware in accordance with tandard EN 179 Thee device (in compliance with EN 179) are intended only for ituation in which there i prior knowledge of the ecape route a well a the operation of the panic device. Operation of the puh pad unlock and open the door and free a clear path. The EN 179-compliant device are both illutrated and decribed. Panic device operated by a puh pad may never be ued in freely acceible public area. DX PO 293 EB Vertical double panic bolt. Two-point locking mechanim in the upper and lower frame. Anti-burglary device againt unauthoried releae of the latch. For ue on ingle and double door. For ue on left and righthanded door. Suitable for door up to 2440 mm high. Option: Alarm et PO AS 304 Dogging device PO VZM V DX PO 297 EB Rim panic latch. For ue on ingle door and on the firt opening door of a double door ituation, in combination with ocket for the latch bolt (PO SK DD). For ue on left and righthanded door, the latch i reverible. DX PO 306 EB With mortice panic nightlatch. Mortie panic lock with latch bolt. Backet ize: 55 mm. PC ize: 35 mm. Suitable for half Euro profile cylinder (not included). For ue on ingle door and on the firt-opening door of a double door ituation. For ue on left and righthanded door, the latch can be revered. Supplied with an eay to clean ocket for the bottom latch in the threhold.
Application guide for panic hardware APPLICATION 1 APPLICATION 2 APPLICATION 3 PO 297 PO 306 PO 293 APPLICATION 4 APPLICATION 5 APPLICATION 6 PO 293 PO 293 PO 297 PO 293 PO 306 PO 293 PLAIN MEETING STILE DOUBLE DOORS WITH MOULDING OR MEETING STILE IMPORTANT When in doubt alway ue panic exit hardware that complie with EN 1125. Thi hardware i delivered with vertical double latch bolt, rim panic latche and a mortice panic lock. It i operated by a horizontal puh bar that unlock the door with a downward motion of the bar, clearing the way in the event of an emergency. Symbol for the door that open firt (1t opening leaf).
A finihing touch Powdercoating The DX 200 erie i delivered in the tandard finihe red-black (RZ) and ilver (SE). A complete range of RAL-colour can be delivered on demand. The urface are powder coated which contribute to durability. The coating are ubjected to alt pray tet during in exce of 240 hour. Metallic finihing The DX 200 erie i alo deliverable in the finihe matted Stainle Steel (SS) and bra plated (PL). The keep for double door et and metal hoot are alo deliverable in thee finihe. Corroion reitance When panic exit hardware i placed in urrounding with a high concentration of humidity, it can be pecially treated: zamac and aluminum part will be chromated, teel part will be galvanized and part within are treated with greae with a high vicoity. Protected againt corroion the panic exit hardware device i now applicable in for example wim hall. Thi treatmemt (PP) i optional for all type. MATTED BLACK (BM) RED 12 (NRE) RAL-DS 030 30 45 GREEN 13 (NGR) RAL-DS 160 30 38 BRONZE (BE) WHITE 19 (NWH) RAL-DS 9500 BLUE 63 DARK BLUE 37 (NSB) (NDB) RAL-DS 240 50 15 RAL-DS 270 20 25 YELLOW 22 (NYE) RAL-DS 090 85 10 MANHATTAN 67 (NMG) RAL-DS 080 70 05 DARK GREY 18 (NDG) RAL-DS 3500 STEEL STAINLESS STEEL (SS) METALLIC STEEL BRASS PLATED (PB) METALLIC