DRESS YOUR POOL IN COLOR WITH NG 11 Reinforced 1.5 mm waterproofing membrane, for that touch of elegance
RANGE 1 NG 11 UNICOLOR STANDARD: Standard finishing, available in 15 colours 559/CA LIGTH BLUE* 559/AB BLUE* 559/DB DARK BLUE* 559/HB WHITE* 559/SA SAND* 559/GC PEARL GREY* 559/GB DARK GREY* 559/GA BASALT GREY* 559/NB BLACK ANTRACITE* 559/GO PINK* 559/VD GREEN WATER* 559/VC CARIBBEAN GREEN* 559/VM WILD MUSK* 559/GL YELLOW* 559/RA RED* NG 11 UNICOLOR SUPERIOR GLOSSY: Glossy finishing, available in 6 colours 5750/CA LIGTH BLUE 5750/AB BLUE 5750/HB WHITE 5750/SA SAND 5750/GC PEARL GREY 5750/GB DARK GREY NG 11 PRINTED GLOSSY: Printed glossy finishing, available in 10 colours 5750/MSI ALHAMBRA 5750/MMB MARBELLA* 5750/MNB BLUE MOSAIC* 5750/MNG GREEN MOSAIC 5750/SB SKY BLUE 5750/WF WHITE FLORENCE 5750/PB BLACK PEARL 5750/STON STONE 5750/GOLD GOLD MOSAIC 5750/MMGO MARBELLA GOLD * NG 11 ANTISKID: Antiskid finishing, available in 17 colours The special glossy finishing of NG 11 ANTISKID membrane provides better resistance to U.V., sunscreens and any microorganisms. It also allows an easier maintance of the membrane.
ADVANTAGES OF REINFORCED MEMBRANE 1Flexibility, adaptable to any shape Colour stability 5 High 6 Fast installation, very good weldability Wide range of highly aesthetic designs mechanical strength and puncturing resistance Resistance to commonly used water treatment products 7 High weathering and U.V. resistance 9 Resistance to cold - heat cycles 10 Waterproofing: total protection of the pool 8Resistance to microorganisms thanks to BIO_ SHIELD treatment The membranes NG 11 are the result of years of research and development.
TECHNICAL CHARACTERISTICS STANDARD EN 1586/ DESCRIPTION Synthetic membrane of PVC-P manufactured by cast process, consisting of layers of Plastisol having different physical-chemical properties and reinforced with polyester mesh. PROPERTIES High weathering and U.V. resistance High mechanical strength Puncturing resistance. Excellent weldability Resistance to commonly used water treatment products STANDARD PRODUCTION Thikness: 1,5 mm. Width: 1,60 m / 1,50* m Lenght: 5 m / 10* m * Available in antiskid version More RAL colours, glossy finishing and antiskid versions available upon request and extra cost can apply. CHARACTERISTICS NG 11 NG 11 GLOSSY UNICOLOR NG 11 GLOSSY PRINTED TESTING METHOD Thickness (mm) 1,50 1,50 1,50 UNI EN 189- Width (mm) 1,60 1,60 1,60 UNI EN 188- lenght nominal value nominal value nominal value UNI EN 188- Flatness (mm) 10 10 10 UNI EN 188- Rectitude (mm) 0 0 0 UNI EN 188- Mass per unit of water (kg / sqm) 1,80 1,80 1,80 UNI EN 189- Water absorption (168 hours ± C) (%) 1,0 1,0 1,0 EN ISO 6 met. 1 CaCO Content (%),0,0,0 EN 1586 - all. A Tensile strength (N/5cm) 1100 1100 1100 UNI EN 111- met. A Elongation at break of the reinforcement (%) 15 e 0 15 e 0 15 e 0 UNI EN 111- met. A Tear resistance (N) 180 180 180 UNI EN 110- Dimensional stability (%) 0,5 0,5 0,5 UNI EN 1107- Cold pliability ( C) - 5-5 - 5 UNI EN 95-5 Peel resistance (overlaping) (N/5cm) 80 80 80 UNI EN 116- Slip resistance (º) (*) -- -- Weathering resistance: - Exposure of 68 MJ/m UV between 00 and 00 nm - Contrast level according grayscale Resistance to microorganisms: - Mass loss (%) Resistance to bacteria Streptoverticillium reticulum Resistance to chlorine: - Changes color depending on the grayscale Stain resistance: - Changes color depending on the grayscale Stain resistance after abrasion: - Changes color depending on the grayscale 000 hours level 000 hours level 000 hours level EN 1586- all. B UNI EN 151-1 EN ISO 89- met. A cicle nr 1 EN 0105 - A0 5,0 1,0 1,0 EN ISO 86 met. D Absence of stains Absence of stains Absence of stains EN ISO 86 met. C Ceppo: ATCC 5607 level level level EN 1586 - all. C level level level EN 1586 - all. D -- -- level EN 1586 par. 6..1 EN 1586 - all. D
INSTALLATION 1 1 SUPPORT SEPARATING LAYER FIXING PROFILE 1 Welding of the 9 mm PVC cord. Placing the membrane on the perimeter profile. Detail of the membrane placed on the perimeter profile with PVC cord for closing anchor profile. 5 6 The blade anchored on trim is tensioned in the vertical wall and is mechanically fixed on the support. Later on the bottom of pool, membranes are welded to each other, with minimal overlap of 5 cm. Mandatory control of all welds. Sealing of the weldings with liquid PVC.
TEXSA SYSTEMS, S.L.U. C/ Ferro, 7 - Pol. Ind. Can Pelegrí 08755 Castellbisbal - Barcelona. Spain www.texsa.com