Applied Lighting Controls Updated for 2011 Better Buildings By Design Burlington, Vermont February 9, 2011 Instructor: Steven Mesh, LC, IESNA 140 Gardenside Drive, #304 San Francisco, CA 94131 415-516-8126 steve@stevemesh.com
Efficiency Vermont is a Registered Provider with The American Institute of Architects Continuing Education Systems (AIA/CES). Credit(s) earned on completion of this program will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-aia members are available upon request. This program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. Questions related to specific materials, methods, and services will be addressed at the conclusion of this presentation. Applied Lighting Controls BBBD, Burlington, VT, 2/9/11
Learning Objectives At the end of this program, participants will be able to: Obtain first-hand experience with energy-saving lighting controls Wire up a device through hands-on demonstration Discuss the pros and cons of a range of controls, including occupancy sensors, dimming, and daylight harvesting Applied Lighting Controls BBBD, Burlington, VT, 2/9/11
Course Evaluations In order to maintain high-quality learning experiences, please access the evaluation for this course by logging into CES Discovery and clicking on the Course Evaluation link on the left side of the page. Applied Lighting Controls BBBD, Burlington, VT, 2/9/11
Copyright materials This presentation is protected by US and International copyright laws. Reproduction, distribution, display and use of the presentation without written permission of the speaker is prohibited. Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 5
Table 1 Wallbox devices supervised by Gabe Arnold 1.1 Timer switch 1.2 2-wire phase-control dimming 1.3 3-wire phase-control dimming 1.4 4-wire 0-10VDC dimming 1.5 DALI dimming 1.6 Wireless dimming Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 6
1.1 Timer switch Countdown timer display On/off switch WattStopper #TS-400-W Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 7
1.2 2-wire phase-control dimming Advance #REZ2S32SC G N H 2-wire dimming ballast Dimmer switch WattStopper #DCD267 requires rapid-start lampholders (fixture) Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 8
1.3 3-wire phase-control dimming Lutron #EC5-T832-J-UNV-2 Orange Red Yellow G N SH DH 3-wire dimming ballast Dimmer switch Lutron #NTF-10-WH requires rapid-start lampholders (fixture) Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 9
1.4 4-wire 0 10VDC dimming OSRAM/Sylvania #QT2x32/120DIM Red-to- Violet Gray G N H + - 4-wire (0-10VDC) dimming ballast Dimmer Switch ON OFF requires rapid-start lampholders Lightolier #ZP600FAM (fixture) Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 10
1.5 DALI dimming WattStopper #DPS150 Power Supply Advance #ROVR IDA-2S32-SC Purple Purple G N H DA DA 4-wire (DALI) dimming ballast Dimmer Pushbutton (on/off) Starfield #TR-10 DALI requires rapid-start lampholders (fixture) Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 11
1.6 Wireless dimming OSRAM/Sylvania #QT2x32/120DIM Violet Gray Gray G N H + - 4-wire (0-10VDC) dimming ballast RX TOP COM BTM Blue Gray Yellow TX TX Violet Blue Single relay controller/receiver Adura #LC-1RD Connected via RF SPDT lowvoltage switch Adura Wall Control Interface #WCI-1S (fixture) Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 12
Table 2 Occupancy sensors supervised by Steve Mesh 2.1 Wallbox PIR occupancy sensor/switch, single-pole 2.2 Wallbox PIR occupancy sensor/switch, two-pole (for a/b switching of step-dim ballast) 2.3 Line-voltage, ceiling mount, dual technology occupancy sensor 2.4 Low-voltage, ceiling mount, US occupancy sensor with power pack 2.5 Wireless switch retrofit with wireless PIR occupancy sensor Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 13
2.1 Wallbox PIR occupancy sensor/switch, single-pole Red to Switch LED indicator Photosensor PIR sensor WattStopper #PW-100-W Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 14
2.2 Wallbox PIR occupancy sensor/switch, two-pole (for a/b switching of step-dim ballast) Universal #B232PUS50-A Violet to Red to B/W G N H1 H2 3-wire stepdimming ballast Blue Photosensor 2 switches LED indicator (fixture) WattStopper #PW-200-W PIR sensor Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 15
2.3 Line-voltage, ceiling mount, dual technology occupancy sensor Back view WattStopper #DT-355 Red US sensitivity trimpot SPST toggle switch (for manual off) DIP switches Light level pushbutton US receiver US transmitter Front view (cover removed) Lens for IR receiver Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 16
2.4 Low-voltage, ceiling mount, US occupancy sensor with power pack Red Red SPST toggle switch (for manual off) Power pack WattStopper #BZ-50 WattStopper #UT-300-1 Class 2 wiring 24VDC occ. sensor Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 17
2.5 Wireless switch retrofit with wireless PIR occupancy sensor Blue Connected via RF RX TX TX Line-voltage wireless receiver Leviton #WSS10-GDW Wireless self-powered PIR occupancy sensor Leviton #WSC04-I0W Wireless self-powered wall switch transmitter Leviton #WSS0S-P0W Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 18
Table 3 Photosensors supervised by Steve Mesh 3.1 Low-voltage on/off 3.2 0-10VDC dimming with photosensor (ceiling mounted) 3.3 Wireless photosensor dimming 3.4 Multi-zone photosensor dimming Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 19
Yellow 3.1 Low-voltage on/off Red Power pack WattStopper #BZ-50 Power pack Red Blue Class 2 Photosensor WattStopper #LS-102 Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 20
3.2 0-10VDC dimming with photosensor (ceiling mounted) Red (fixture) G N H + - 4-wire (0-10VDC) dimming ballast OSRAM/Sylvania #QT2x32/120DIM Power pack WattStopper #BZ-50 Power pack Red Gray Violet Blue Class 2 Class 2 WattStopper #LSR-301-S Occ. sensor WattStopper #CI-300 Photosensor WattStopper #LS-301 Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 21
3.3 Wireless photosensor dimming Red Yellow Echoflex #ERDRC-CC 120/277 Brown Receiver/ power pack RX Red Violet Gray G N H + - 4-wire (0-10VDC) dimming ballast OSRAM/Sylvania #QT2x32/120DIM Class 2 (fixture) TX TX Connected via RF Switch Echoflex # PTM265CW Photosensor Echoflex #TAP-17C Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 22
3.4 Multi-zone photosensor dimming TB1 S1 S2 S3 S4 S5 P1 P2 P3 P4 LOC TB2 WattStopper photocell LS-290C v2 0-10VDC dimming ballast COM WattStopper LS-5C (terminals in photosensor) 1 2 3 0-10VDC dimming ballast RJ-12 quick connector cable D BT-203 power pack 1 2 3 4 5 6 7 8 D A B 1 2 3 4 5 6 7 8 9 10 11 12 + 1-2 + 3 7 8 9 10 11 12 LCD-203 controller - 4 + 5-6 A B 0-10VDC dimming ballast Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 23
Table 4 Preset dimming systems supervised by Gabe Arnold 4.1 Integrated multi-zone multi-scene preset 4.2 Modular multi-zone multi-scene preset Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 24
4.1 Integrated multi-zone multi-scene preset 1 2 3 Advance #REZ2S32SC G N H 2-wire dimming ballast (fixture) Zone adjustment and indication G N L 1 2 3 4 Lutron #GRX3506-AWH Scene selection Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 25
Fixture types: A Q37MR16 downlights B LED wallwashers C CFL wall sconces D F32T8 pendant direct-indirect ambient light C C B A A A A B D A A A A B B B CA C C Scenes for conference room preset system: 1 Client meeting (face-to-face) 2 A/V presentation 3 Reviewing legal documents on table 4 After-hours cleaning 26
Wh Wh Wh Red 4.2 Modular multi-zone multi-scene preset (3) #MSP600VAI #MSP8ESW 1 2 3 (fixture) G N H 2-wire dimming ballast Advance #REZ2S32SC #MSP5ESW #MSP600EBI #MSCR-AL Gray Purple Yellow Applied Lighting Controls BBBD, Burlington, VT, 2/9/11 27
CB S S S S CF CA S S S S CC S S CD S S CE 28
Dimmers in electrical room for Bay A CB S S S S CF CA Single-gang SPST switches S S S S CC S S CD S S CE Typical control station ( CB CF ); 1 5-scene preset selector + 3 dimmers 29