Cirrus 25/1 The Cirrus 25/1 range of fan heaters uses PTC ceramic heating technology to provide the user with a product ideally suited to climate control. The heater can be controlled independently to the fan, allowing a fan-only mode for air circulation. There are nine variants, giving different power and supply voltage capability. The product has been designed, and approved, for build-in applications. It has a robust construction utilising two anodised aluminium extrusions, coupled to a 25mm fan. The heating element is a DBK PTC heater. For ease of installation the product can be supplied with a factory fitted 35mm DIN-rail mounting clip, and electrical connection is via colour coded stripped-end wires. To enable the use of different supply voltages to the fan nominal, Smartcan is employed within the harness on certain units. DBK Part No Power Output (@ 10ºC) Heater Voltage Fan Voltage FGC 0002.2R 5W 12V AC/DC 12V DC FGC 0004.2R 10W 12V AC/DC 12V DC FGC 0005.2R 20W 12V AC/DC 12V DC FGC 0011.2R 5W 12V AC/DC 12V AC* FGC 0013.2R 10W 12V AC/DC 12V AC* FGC 0014.2R 20W 12V AC/DC 12V AC* FGC 0015.2R 5W 24V AC/DC 24V AC/DC* FGC 0017.2R 10W 24V AC/DC 24V AC/DC* FGC 0018.2R 20W 24V AC/DC 24V AC/DC* * Use Smartcan FGF 01 25mm wire finger guard Factory fitted at outlet only Nominal Power @ 10º C 5W 10W 20W Typical max in-rush current (A) RMS @ 12V AC Typical max in-rush current (A) RMS @ 24V AC 0.5 1.5 3 1.3 1.3 3 5.1 5.1 5.1 Fan life time - L10 @ 40ºC(Hrs) 120,000 120,000 120,000 Fan Operating temperature range (ºC) -10 to +70-10 to +70-10 to +70 Nominal input voltage Dimensions (mm) - cross section 26x27 26x27 26x27 Length (mm) 50 50 50 Weight (g) 60 60 60 Finger guards at outlet Optional Optional Optional
Cirrus 25/2 The Cirrus 25/2 range of fan heaters uses PTC ceramic heating technology to provide the user with a product ideally suited to climate control. The heater can be controlled independently to the fan, allowing a fan-only mode for air circulation. There are eighteen variants, giving different power and supply voltage capability. The product has been designed, and approved, for build-in applications. It has a robust construction utilising two anodised aluminium extrusions, coupled to a 25mm fan. The heating element is a DBK PTC heater. For ease of installation the product can be supplied with a factory fitted 35mm DIN-rail mounting clip, and electrical connection is via colour coded stripped-end wires. To enable the use of different supply voltages to the fan nominal, Smartcan is employed within the harness on certain units. DBK Part No Power Output (@ 10ºC) Heater Voltage Fan Voltage FGC 0501.2R 20W 12V AC/DC 12V DC FGC 0502.2R 30W 12V AC/DC 12V DC FGC 0503.2R 40W 12V AC/DC 12V DC FGC 0504.2R 20W 115/ 12V DC FGC 0505.2R 30W 115/ 12V DC FGC 0506.2R 40W 115/ 12V DC FGC 0515.2R 20W 12V AC/DC 12V AC* FGC 0516.2R 30W 12V AC/DC 12V AC* FGC 0517.2R 40W 12V AC/DC 12V AC* FGC 0518.2R 20W 115/ 12V AC* FGC 0519.2R 30W 115/ 12V AC* FGC 0520.2R 40W 115/ 12V AC* FGC 0521.2R 10W 24V AC/DC 24V AC/DC* FGC 0523.2R 30W 24V AC/DC 24V AC/DC* FGC 0524.2R 40W 24V AC/DC 24V AC/DC* FGC 0525.2R 20W 115/ 24V AC/DC* FGC 0526.2R 30W 115/ 24V AC/DC* FGC 0527.2R 40W 115/ 24V AC/DC* * Use Smartcan FGF 01 25mm wire finger guard Factory fitted at outlet only Nominal Power @ 10º C 10W 20W 30W 40W - 2.5 4 5 @ 12V AC 2.5-5.5 9.5 @ 24V AC @ - 0.5/2.5 1/3.5 1/3.5 115/ 5.1 5.1 5.1 5.1 Fan life time - L10 @ 40ºC(Hrs) 120,000 120,000 120,000 120,000 Fan Operating temperature range (ºC) -10 to +70-10 to +70-10 to +70-10 to +70 Nominal input voltage (Fan) Nominal input voltage (Heater) 12AC/DC or 12AC/DC or 12AC/DC or 24AC/ 115/230 or 115/230 DC or 115/230 Dimensions (mm) - cross section 26x27 26x27 26x27 26x27 Length (mm) 72 72 72 72 Weight (g) 90 90 90 90 Finger guards at outlet (High Voltage N/A Yes Yes Yes Finger guards at outlet (Low Voltage Optional Optional Optional Optional
Cirrus 40/1 DBK Part No Power Output (@ 10ºC) Heater Voltage Fan Voltage FGC 1032.2R 50W 12V AC/DC 12V DC FGC 1002.2R 60W 12V AC/DC 12V DC FGC 1035.2R 50W 115/ 12V DC FGC 1005.2R 60W 115/ 12V DC FGC 1006.2R 80W 115/ 12V DC FGC 1007.2R 100W 115/ 12V DC FGC 1033.2R 50W 12V AC/DC 12V AC* FGC 1018.2R 60W 12V AC/DC 12V AC* FGC 1036.2R 50W 115/ 12V AC* FGC 1021.2R 60W 115/ 12V AC* FGC 1022.2R 80W 115/ 12V AC* FGC 1023.2R 100W 115/ 12V AC* FGC 1034.2R 50W 24V AC/DC 24V AC/DC* FGC 1026.2R 60W 24V AC/DC 24V AC/DC* FGC 1037.2R 50W 115/ 24V AC/DC* FGC 1029.2R 60W 115/ 24V AC/DC* FGC 1030.2R 80W 115/ 24V AC/DC* FGC 1031.2R 100W 115/ 24V AC/DC* * Use Smartcan FGF 01 40mm wire finger guard Factory fitted at outlet only. Optional at inlet. FGF 08 Plastic 40mm finger guard Optional FGF 05 Plastic 40mm finger guard and filter assembly Optional The Cirrus 40/1 range of fan heaters uses PTC ceramic heating technology to provide the user with a product ideally suited to climate control. The heater can be controlled independently to the fan, allowing a fan-only mode for air circulation. There are eighteen variants, giving different power and supply voltage capability. The product has been designed, and approved, for build-in applications. It has a robust construction utilising two anodised aluminium extrusions, coupled to a 40mm fan. The heating element is a DBK PTC heater. For ease of installation the product can be supplied with a factory fitted 35mm DIN-rail mounting clip, and electrical connection is via colour coded stripped-end wires. To enable the use of different supply voltages to the fan nominal, Smartcan is employed within the harness on certain units. Nominal Power @ 10º C 50W 60W 80W 100W @ 12V AC @ 24V AC @ 115/ 5 6.5 - - 5.5 7.5 - - 2/6 1.5/5 2/6.5 1.5/4.5 13.6 13.6 13.6 13.6 Fan life time - L10 @ 40ºC(Hrs) 120,000 120,000 120,000 120,000 Fan Operating temperature range (ºC) Nominal input voltage (Fan) Nominal input voltage (Heater) -10 to +70-10 to +70-10 to +70-10 to +70 12AC/DC or 24AC/ DC or 115/230 12AC/DC or 24AC/ DC or 115/230 115/230 115/230 Dimensions (mm) - cross section 42x42 42x42 42x42 42x42 Length (mm) 72/77 72/77 77 77 Weight (g) 175 175 175 175 Finger guards at outlet (High Voltage Yes Yes Yes Yes Finger guards at outlet (Low Voltage Optional Optional N/A N/A
Cirrus 40/2 DBK Part No Power Output (@ 10ºC) Heater Voltage Fan Voltage FGC 1500.2R 125W 115/ 12V DC FGC 1501.2R 150W 115/ 12V DC FGC 1502.2R 200W 115/ 12V DC FGC 1503.2R 230W 115/ 12V DC FGC 1507.2R 230W 115/ 24V DC FGC 1508.2R 125W 115/ 12V AC* FGC 1509.2R 150W 115/ 12V AC* FGC 1510.2R 200W 115/ 12V AC* FGC 1511.2R 230W 115/ 12V AC* FGC 1512.2R 125W 115/ 24V AC/DC* FGC 1513.2R 150W 115/ 24V AC/DC* FGC 1514.2R 200W 115/ 24V AC/DC* FGC 1515.2R 230W 115/ 24V AC/DC* FGC 1580.2R 275W 115/ 12V DC FGC 1581.2R 275W 115/ 12V AC* FGC 1582.2R 275W 115/ 24V DC FGC 1583.2R 275W 115/ 24V AC/DC* * Use Smartcan The Cirrus 40/2 range of fan heaters uses PTC ceramic heating technology to provide the user with a product ideally suited to climate control. The heater can be controlled independently to the fan, allowing a fan-only mode for air circulation. There are seventeen variants, giving different power and supply voltage capability. The product has been designed, and approved, for build-in applications. It has a robust construction utilising two anodised aluminium extrusions, coupled to a 40mm fan. The heating element is a DBK PTC heater. For ease of installation the product can be supplied with a factory fitted 35mm DIN-rail mounting clip, and electrical connection is via colour coded stripped-end wires. To enable the use of different supply voltages to the fan nominal, Smartcan is employed within the harness on certain units. FGF 01 40mm wire finger guard Factory fitted at outlet only. Optional at inlet. FGF 08 Plastic 40mm finger guard Optional FGF 05 Plastic 40mm finger guard and filter assembly Optional Nominal Power @ 10º C 125W 150W 200W 230W 275W (CE Marked only) Typical max in-rush current (A) 10 10 9 9 11 RMS @ 12.4 12.4 12.4 17 17 Fan life time - L10 @ 40ºC(Hrs) 120,000 120,000 120,000 50,000 50,000 Fan Operating temperature -10 to +70-10 to +70-10 to +70-20 to +60-20 to +60 range (ºC) Nominal input voltage (Fan) 12DC, 12AC or 12DC, 12AC or Nominal input voltage (Heater) 115/230 115/230 115/230 115/230 115/230 Dimensions (mm) - cross 42x42 42x42 42x42 42x42 42x42 section Length (mm) 112 112 112 122 122 Weight (g) 260 260 260 275 275 Finger guards at outlet Yes Yes Yes Yes Yes
Cirrus 60 The Cirrus 60 range of fan heaters comprises forced air enclosure heaters that use PTC ceramic heating technology. They can also be used in a fan-only mode (no heat) providing the user flexibility of use applications. There are two primary variants, giving different power and supply voltage capability. are capable of running both heater and fan from mains voltage whilst maintaining the high airflow and power performance normally seen only using a DC fan. Each option has a user selectable power output for no heat, 200W, 300W or full power output at 400W. The product has been designed, and approved, for built-in applications. It has a robust construction utilising high temperature plastic mouldings, coupled to a 60mm fan. VDE 40024197 The heating element is a DBK Al finned PTC air heater. For ease of installation the product can be supplied with a factory fitted 35mm DIN-rail mounting clip or either two bracketmount options, and electrical connection via flying leads. DBK Part No Power Output (@ 10ºC) Supply Voltage FGC 3000 400/300/200W Heater & Fan FGC 3001 400/300/200W Heater & Fan FGB 300 35mm DIN clip EN50022 Factory fitted FGB 301 Side mount bracket Factory fitted FGB 302 Bulkhead bracket Factory fitted Nominal Power @ 10º C 400W 300W 200W Typical peak in-rush current (A) RMS 10 8 4 @ Typical peak in-rush current (A) RMS 5 3.5 1.75 @ Maximum body temperature (40ºC 55 50 45 Ambient) Electrical protection class II II II Ingress protection IP20 IP20 IP20 Operating temperature range (ºC) -10 to +70-10 to +70-10 to +70 Storage temperature range (ºC) -40 to +70-40 to +70-40 to +70 at 50Hz (230V 10 10 10 AC) at 60Hz (115V 13 13 13 AC) Fan life time - L10 @ 40ºC(Hrs) 49,000 49,000 49,000 Nominal input voltage (depending on variant) Dimensions (mm) cross section length 71x70 96.5 71x70 96.5 71x70 96.5 Harness length (mm) 240 240 240 Weight (g) - add 35g for bracket 275 275 275 Finger guards at inlet and outlet Yes Yes Yes
Cirrus 80 The Cirrus 80 range of fan heaters comprises forced air enclosure heaters that use PTC ceramic heating technology. They can also be used in a fan-only mode (no heat) providing the user flexibility of use applications. There are four variants, giving different power and supply voltage capability. (Each has a user selectable power output for no heat, half heat or full heat output.) The product has been designed, and approved, for built-in applications. It has a robust construction utilising an anodised aluminium extrusion and a high temperature plastic moulding, coupled to an 80mm fan. VDE 40024201 The heating element is a DBK Al finned PTC air heater. All products in this range have a built-in electrically re-settable safety thermostat to protect the product in the event of fan failure. For ease of installation the product can be supplied with a factory fitted 35mm DIN-rail mounting clip, electrical connection is via an easily accessible connector block. DBK Part No Power Output (@ 10ºC) Supply Voltage FGC 2000 300/600W 115V FGC 2001 450/800W 115V FGC 2002 300/600W 230V FGC 2003 450/800W 230V FGB 100 35mm DIN clip Factory fitted FGF 100 30 PPI Filter assembly Approx 10% power output reduction Nominal Power @ 10º C 300/600W 450/800W Typical max in-rush current (A) @ 10 11 Typical max in-rush current (A) @ 15 14 Maximum at body temperature 55 80 (ºC) Operating temperature range (ºC) -40 to +60-40 to +60 31-35 31-35 Fan life time - L10 @ 40ºC(Hrs) 43.500 43.500 Nominal input voltage V AC 115 or 115 or 230 230 Dimensions (mm) cross section length 82x110 150 82x110 150 Weight (g) 785 785 Finger guards at inlet and outlet Yes Yes