SIO6 Glass / Ceramics / Mirrors SIO7 Metal / Aluminium / Paintwork SIO8 Wood / Stone SIO9 Fabrics / Leather SI11 Concrete / Metal / Wood SI13 Concrete / Metal / Wood Protect any surface with a nano layer SIMC Multi Maintenance Cleaner Industrial Brochure
02 Index Page SIO6 Glass / Ceramics / Mirrors (invisible) SIO7 Metal / Aluminium / Paintwork (invisible) SIO8 Wood / Stone (invisible) SIO9 Fabrics / Leather (invisble) SI11 - (transparent) Concrete / Wood / Steel / Fiberglass SI13 - (colour) Concrete / Wood / Steel / Fiberglass SIMC Multi Maintenance Cleaner (invisible) 8 9 10 12 14 16 18
03 What is Nano-Ceramic? is a revolutionary ultra hard and longlasting surface coating wearing ceramic in the world, that provides superior scratch resistance, and permanent protection for all in construction used materials like paint, composite, fiberglass, stainless steel, natural stone, concrete, glass and wood. The coating bonds molecular and permanent onto the surface is flexibel and can handle expansion and deformation such as the bending of a stainless steel plate, the coating won t crack, and can t be peeled off. is a permanent layer, and will give the surface a longlasting new condition, without the need of of using heavy cleaning agents. Nowayads surface coatings are simply not strong enough. is completely resistant to acidic environmental substances, as bird droppings, and to oxidation, by salty water. will not etch or dissolve when in contact with these substances, like salts, fuels, hydraulic fluids, and other harmfull substances, and the clean and original surface is mantained.
04 What are the benefits of applying NANO- CERAMIC? will provide the surface with a superior clear coat film that once cured has a permanent hydrophobic surface that is much easier to clean, and stays cleaner for longer. Resulting in less maintenance, less maintenance cost, and in a higher resale value over time, and most important a beautifull luxery gloss. How it works? Step 1 Surface layer of factory gel coat is damaged and contaminated. Tip! Install it direct when finishing a new Project. This is by far the best and most economical option. Step 2 Technician decontaminates and polishes gel coat to produce a smooth and even surface. Step 3 Thickness gel coating will be restored with a superior layer. Uncoated Coated
05 Nowadays materials attract polusion our layers are self cleaning and push dirt away. The benefits at a glance! Easy to Apply Permanent Protection Two simple steps Clean- and Apply Permanent protection from the surface underneeth. Anti Scratch our layers are 4 times harder as factory paint. UV Ray Protection This coating has an outstanding hydrophobic effect, and the surface stays cleaner for longer. After the coating has been applied the surface is much easier and quicker to clean and the adhesion of dirt is reduced drastically. Prevent icing and algea growth. Cleaning intervals and maintenance costs will be greatly reduced. Retention of all materials used, and less refurbushing cost, Good maintenance from materials used result in a higher resale value over time. UV Protection Anti Corosion Super Hydrophobic Anti Termite Anti Algae Cut Cleaning Cost Cut Refurbishing Cost Self cleaning cleaner for longer Easy Clean Easy to Clean NANO-CERAMIC
06 Where to use our coatings SIO7-SI11-SI13 SIO6 SIO6 SI11-SI13 SIO7-SI11-S113 SIO9 SIO8-SI11-SI13 Automotive SIBC-SIO1-SIO2-SI03-SIO5 SI11-SI13 Order procedure SIO6 SIO7 Trying is the best way to convince yourself. You can order directly from us through our automatic order entry system www.store.nano.ceramic-com Upon receipt of order we will issue a Invoice, and once payment is received we will ship the order by courrier of your choice.
07 SIO6 Protector Line Glass / Ceramics maintenance Article Nr : SIO60100 100ml / 3,2oz Coating SIO61000 1 Litre / 32oz Coating Consumption : +/- 2-4ml/m 2 0.06-0.14oz/m 2 Used for : glass, ceramics, mirrors Application field : airports, office buildings, hotels and private housing, etc SIO6 is an ultra long lasting invisible surface coating which bonds mulecular and permanently onto the surface. Two simple steps Clean- and Apply When the coating has been applied the surface is much easier and quicker to clean and the adhesion of dirt is reduced drastically. Bacteria get less chance to survive, and hygiene goes to a higher level. This coating has an outstanding hydrophobic effect, and the surface stays cleaner for longer. Cleaning intervals as well as the form of water spots will be greatly reduced. Prepare and Clean SCRUB0250 250ml/8oz Scrub SCRUB1000 1 Litre/32oz Scrub SHPO1000 1 Litre/32oz Shampoo CLEAN0250 250ml/8oz Steril CLEAN1000 1 Litre/32oz Steril SIMC1000 1 Litre/32oz Multi-Cleaner how to use - mantain Page 11 indoor outdoor cut cleaning cost H9 hardness super hydrophobic food hygene anti fingerprint self cleaning cleaner for longer Will last up to 5 years with routine maintenance
08 SIO7 Protector Line Steel / Alu / Paint maintenance Article Nr : SIO70100 100ml / 3,2oz Coating SIO71000 1 Litre / 32oz Coating Consumption : +/- 2-4ml/m 2 0.06-0,14oz/m 2 Used for Application field : stainless steel, alumunium, paintwork, wood varnished composite panels : airports, office buildings, hotels, restaurant and private housing, etc SIO7 is an ultra long lasting surface invisibble coating which bonds mulecular and permanently onto the surface. Two simple steps Clean- and Apply Fingerprints are less visible and can easily be removed with a dry microtowel. Bacteria get less chance to survive, and hygiene goes to a higher level. surface has an outstanding hydrophobic effect, and stays cleaner for longer. The coating has a hardness of H9 (Anti Scratch) and protects against corrosion. Will last up to 5 years with routine maintenance Prepare and Clean SCRUB0250 250ml/8oz Scrub SCRUB1000 1 Litre/32oz Scrub SHPO1000 1 Litre/32oz Shampoo CLEAN0250 250ml/8oz Steril CLEAN1000 1 Litre/32oz Steril SIMC1000 1 Litre/32oz Multi-Cleaner how to use - mantain Page 11 indoor outdoor cut cleaning cost H9 hardness super hydrophobic food hygene anti fingerprint cleaner for longer
09 SIO8 Protector Line Wood / Stone Article Nr : : SIO80100 100ml / 3,2oz Coating : SIO81000 1 Litre / 32oz Coating Consumption : +/- 40ml/m 2 1.35oz/ m 2 Used for: : wood and LVL engineerd wood (unvarnished) concrete, stone, natural stone, marble Application field : : yachts, outdoor furniture, hotel, buildings, private housing, etc Prepare and Clean SCRUB0250 250ml/8oz Scrub SCRUB1000 1 Litre/32oz Scrub SHPO1000 1 Litre/32oz Shampoo CLEAN0250 250ml/8oz Steril CLEAN1000 1 Litre/32oz Steril SIMC1000 1 Litre/32oz Multi-Cleaner how to use - mantain Page 11 SIO8 is a long lasting invisible surface coating which bonds mulecular and invisibble onto the surface. Two simple steps Clean- and Apply Algae and Bacteria get less chance to survive, and hygiene goes to a higher level. This coating has an outstanding hydrophobic effect, the surface stays cleaner and dryer for longer. Will last up to 5 years sprayable indoor outdoor cut cleaning cost super hydrophobic anti algae cleaner for longer
010 HOW TO USE: SIO6 SIO7 SIO8 These products can be stored for up to 24 months (in a dry, temperature stable dark environment) Consumption: Glass: appr. 2ml/m 2 Steel 2ml/ m 2 Wood 4ml/m 2 Processing temperature: 5 30 C Avoid direct sunlight and/or high air humidity. IMPORTANT: Before you use a NANO- CERAMIC product please make sure you wear suitable protection gear we always recommend to use Latex or Nitril gloves to make sure your hands are protected from any possible damage to your skin. Applicators: CLEANING Make clean the surfaces thoroughly until the complete surface is absolutely clean. If necesarry use our Shampoo and Scrub Cleaner and use our Steril Pre-treatment Cleaner as a last step to make sure that all Scrub cleaner residue or all contamination is removed so that the coating can bound properly onto a clean surface. Make sure that the surface is completely dry before application! APPLICATION SIO6 - SIO7 Shake the bottles very well before use! Take a soft cotton pad and pour a few drops of the coating on it (start with small amounts, there is only very little product needed). Moisten all the Glass -Steel -or Wood panels evenly with firm pressure on the pad. When applied correctly you can now see a light grey veil on the surfaces. Polish away the grey veils after all solvents are vaporized, use a clean (microfiber) cloth, don t use a lot of power to take them away.. APPLICATION SIO8 Shake the bottles very well before use! Carefullly poor the mixed content into a sprayer bottle. or preferable a paint sprayer, spray till the surface is saturated and let the surface dry. 40100703 CURING TIME Directly after polishing the coating is dry and resistant against touching. At normal ambient temperature the coatings are completely cured after approximately 12 hours. 40200406 MAINTENANCE SIMC 1 Liter = +/- 500 m 2 or +/- 2ml/m 2. every 3 month. 90100200 40100100 40101000 Topeng Nitrile gloves Cat sprayer 0.04-0.07 nozzle 1.00-1.50 mm nozzle NANO-CERAMIC
011 SIO9 Protector Line Fabrics / Leather / Carpet / Canvas Article Nr : SIO91000 1 Litre / 32oz Sealant Consumption : +/- 40ml/m 2 1.35oz/]m 2 Used for : leather, fabrics, carpet and canvas Application area : furniture,hotel, office buildings, private housing, Prepare and Clean SHPO1000 1 Litre / 32oz Shampoo How to use See page 13 The SIO9 invisible sealant bonds breathable and flexible onto the textile fibers and on leather surfaces. Water and dirt get less change to penetrate into the fiber and leather, and and spills are more easy to remove. Hygiene goes to a higher level. This coating has an outstanding hydrophobic effect, fabrics and leather and carpets stays cleaner and dryer for longer. On carpets in buildings cleaning intervals, or need of restoration will be greatly reduced. Will last for 1-3 years invisible original colour remains indoor outdoor breathable & flexible super hydrophobic spilling easy to remove cleaner for longer
HOW TO USE: SIO9 012 These products can be stored for up to 24 months (in a dry, temperature stable dark environment) Consumption: Fabric +/- 65ml/m 2 Leather +/-40ml/m 2 Processing temperature: 5 30 C Avoid direct sunlight IMPORTANT: Before you use a NANO- CERAMIC product please make sure you wear suitable protection gear we always recommend to use Latex or Nitril gloves to make sure your hands are protected from any possible damage to your skin. Applicators: CLEANING Make clean the surfaces thoroughly until the complete surface is absolutely clean. If necesarry use our Reactivating Pure Shine Shampoo. Make sure that all contamination is removed so that the sealant can bound properly onto a clean surface. Make sure that the surface is completely dry before application! APPLICATION Shake the bottles very well before use! and spray until the surface is saturated. CURING TIME At normal ambient temperature the coatings are completely cured after approximately 24 hours. AFTERCARE We strongly recommend to use our re-activating shampoo, it reactivated the nano layer and cleans at the same time, without leaving a film of polymers or colouring chemicals behind as we fomade this shampoo on a very pure basis. This shampoo is very safe for our environment as well. Spray master Mask Nitrile gloves Cat sprayer 0.04-0.07 nozzle 1.00-1.50 mm nozzle
013 Transparent SI112 - Component Concrete / Metall / Wood Permanent coating system Article Nr: Consumption Used for Application area : SI111000 1L / 32oz : +/- 50ml-70ml/m 2 2oz/m 2 depending structur : concrete, mineral stone, metall, wood : infrastructure, office buildings hotel and private housing SI11 is a permanent 2-component surface coating system which bonds mulecular and permanently onto painted and unpainted surfaces resulting in permanent protection from the surface underneath. Two simple steps Clean-Dry and Apply Water and dirt get no change to penetrate, and is easy to remove. This coating has an outstanding hydrophobic effect. On walls or tunnels cleaning intervals, or restoration wil be greatly reduced. (anti-corrosion, anti-pollution) Resistent against all kind of chemicals and UV radiation Superior anti pollution and anti corrosion coating Will last permanent for at least 15-20 year+ Coating SI111000 2 Component: - A = 850ml - B = 150ml Prepare and Clean Shampoo 1 Litre How to use: See page 15 sprayable permanent protection anti corosion super hydrophobic anti pollution anti termite anti algae UV protection self cleaning cleaner for longer NANO-CERAMIC
HOW TO USE: SI11Transparent 2 - Component Sprayable 014 These products can be stored for up to 24 months (in a dry, temperature stable dark environment) Consumption: Stone: appr. 50ml/m2 Processing temperature: 5 30 C Avoid direct sunlight and/or high air humidity. IMPORTANT: Before you use a NANO- CERAMIC product please make sure you wear suitable protection gear we always recommend to use Latex or Nitril gloves to make sure your hands are protected from any possible damage to your skin. It s absolutely necesarry to wear a full face chemical respirator mask and safety suit. Applicators: Application information The SI11 system can be applied on mineral surfaces (absorbing and non-absorbing) such as bricks, sand stone, concrete, terracotta, stone ect. The SI11 system is 100% transparent and breathable. The surface will be cleaner for longer, and the cleaning itself becomes less time and less expensive as special cleaning agents are unnecessary. Make clean the surfaces thoroughly until the complete surface is absolutely clean. If necesarry use our Reactivating Pure Shine Shampoo in combination with a high preasure washer. Make sure that all contamination is removed so that the sealant can bond properly onto a clean surface. Make sure that the surface is completely dry before application! The surface may not become wet during application! This is a 2-Component Nano Coating System Mix bottle SI11 A75% with bottle SI11 B25% by pooring the bottle SI11 B bottle into the A 1L bottle, or measuere a mixture in same ratio and mix it very well and mix it very well. Carefullly poor the mixed content into paint sprayer, spray in thin layers till the surface reach a thickness of appr. 80-200µm / 0.1-0.2mm / 0.004-0.008 after drying. Depending on the face, material and structure, different application techniques can be used: Paint Roller, Paint Brush, or just Whiping the surface with a cotton cloth pad Let the surface dry for 24 hours. (85% is cured after 24 hours, and the remaining 15% will be fully cured after 7 days). Be aware that mixed content can not be stored longer then 3 hours.the surface can simply be mantained with a High Pressure washer at 80-120 bar using our biologically degradable Reactivating Shampoo Tool cleaning The individual components as well as the mixed system can be diluted with our Steril Cleaner. Safety Paint Suit Chemical Full Face Respirator Mask Nitrile Gloves Paint Roller (Polyurethane) Brush (Polyurethane) Cotton Cloth Applicator Cat sprayer 0.04-0.07 nozzle 1.00-1.50 mm nozzle
015 Also for large projects we have the right and ultimate sprayable solution. SI13 Colour Version 2 - Component Concrete / Metall / Wood Permanent coating system Article Nr: Consumption Used for Application area : SI131000 1000L / 32000oz : +/- 50ml-70ml/m 2 2oz/m 2 depending structur : concrete, mineral stone, metall, wood : infrastructure, office buildings hotel and private housing Coating SI131000 2 Component: - A = 850.000ml - B = 150.000ml How to use See page 17 SI13 Is a permanent 2-component surface coating which bonds mulecular and permanently onto the surface resulting in permanent protection from the surface underneath. Custom Colour can be made for a batch >1.000 Liter Two simple steps Clean-Dry and Apply Water and dirt get no change to penetrate, and is easy to remove. This coating has an outstanding hydrophobic effect. On walls or tunnels cleaning intervals, or restoration wil be greatly reduced. (anti-corrosion, anti-pollution) Resistent against all kind of chemicals and UV radiation Superior anti pollution and anti corrosion coating Will last permanent for at least 15-20 year+ sprayable permanent protection anti corosion super hydrophobic anti pollution anti termite anti algae UV protection self cleaning cleaner for longer
HOW TO USE: SI13 Colour Version 2 - Component Sprayable 016 These products can be stored for up to 24 months (in a dry, temperature stable dark environment) Consumption: Stone: appr. 50ml/m2 Processing temperature: 5 30 C Avoid direct sunlight and/or high air humidity. IMPORTANT: Before you use a NANO- CERAMIC product please make sure you wear suitable protection gear we always recommend to use Latex or Nitril gloves to make sure your hands are protected from any possible damage to your skin. It s absolutely necesarry to wear a full face chemical respirator mask and safety suit. Applicators: Application information The SI13 system can be applied on mineral surfaces (absorbing and non-absorbing) such as bricks, sand stone, concrete, terracotta, stone ect. The SI13 system is 100% transparent and breathable. The surface will be cleaner for longer, and the cleaning itself becomes less time and less expensive as special cleaning agents are unnecessary. Make clean the surfaces thoroughly until the complete surface is absolutely clean. If necesarry use our Reactivating Pure Shine Shampoo in combination with a high preasure washer. Make sure that all contamination is removed so that the sealant can bond properly onto a clean surface. Make sure that the surface is completely dry before application! The surface may not become wet during application! This is a 2-Component Nano Colour Coating System Mix bottle SI13 A75% with bottle SI13 B25% by pooring the bottle SI13 B bottle into the A 1L bottle, or measuere a mixture in same ratio and mix it very well. Carefullly poor the mixed content into paint sprayer, spray in thin layers till the surface reach a thickness of appr. 80-200µm / 0.1-0.2mm / 0.004-0.008 after drying. Depending on the face, material and structure, different application techniques can be used: Paint Roller, Paint Brush, or just Whiping the surface with a cotton cloth pad Let the surface dry for 24 hours. (85% is cured after 24 hours, and the remaining 15% will be fully cured after 7 days). Be aware that mixed content can not be stored longer then 3 hours.the surface can simply be mantained with a High Pressure washer at 80-120 bar using our biologically degradable Reactivating Shampoo Tool cleaning The individual components as well as the mixed system can be diluted with our Steril Cleaner. Safety Paint Suit Chemical Full Face Respirator Mask Nitrile Gloves Paint Roller (Polyurethane) Brush (Polyurethane) Cotton Cloth Applicator Cat sprayer 0.04-0.07 nozzle 1.00-1.50 mm nozzle
017 Treatet Untreatet SIMC Si-Multi Maintenance Cleaner Hydrophobic Disinfectant Article Nr : SIMC0250 SIMC1000 Consumption : +/- 2ml/m 2 0,06oz/m 2 Used for : glass / chrome /porcelain / venyl / acrylic Application field : airports, office buildings, hotels and : private housing an Si-Multi Maintenance Cleaner bonds while cleaning, an invisible, molecular and permanent disinfectant hydrophobic nano layer onto the surface. The surface is mucheasier and quicker to clean as the product contains a high tech cleaning agent. Bacteria get less chance to survive, and the hygiene goes to a higher level. As the bacterial disinfectant remains active as long as the layer is there. This cleaner has an outstanding hydrophobic effect, adhesion of dirt will be reduced drastically, and the surface stays cleaner for longer. Can be used as maintenance cleaner on all nano and non-nano coated surfaces. Will last up to 3 months Multi Cleaner SIMC 250 ml /80z / 1L 32oz Applicator Microtowel unbreakable bottles hydrophobic water & oil repellent disinfectant self cleaning cuts cleaning time 90% cleaner for longer visibility safety anti fog
018 HOW TO USE: NANO-CERAMIC SIMC Multi Maintenance Cleaner These products can be stored for up to 24 months (in a dry, temperature stable dark environment) Consumption: +/- 2 ml /M2 Processing temperature: 5 30 C Avoid direct sunlight IMPORTANT: Before you use a NANO- CERAMIC product please make sure you wear suitable protection gear we always recommend to use Latex or Nitril gloves to make sure your hands are protected from any possible damage to your skin. EASY APPLICATION CLEAN-WHIPE-BUFF OFF Shake the bottles very well before use! Spray 2-3 times on a clean microtowel (start with small amounts, there is only little product necessary). Moisten all the panels evenly. When applied correctly you can now see a light grey veil on the surfaces. Polish away the grey veils using a clean (microfiber) cloth. CURING TIME Directly after polishing away the grey veils, the layer can be touched. At normal ambient temperature the sealant is completely cured after approximately 10 minutes. Applicators: 2ml / m 2 40100703 Spray master
019 Technology Test certificates
020 Material Safety Data Sheets Corrosion Tests Test Test Permanent Coating System (PCS) CONCRETE Uncoated EN1504-2 Coated
Do you know? That our coatings are made of pure silica sand which is the most common element on earth? The leader in Durability Asian Region (Head office) PT Nano Ceramic Indonesia, The Central 88, Kemayoran, (The Linq) Jl. Trembesi Blok D3 N0. 369 Pademangan, Jakarta, Utara Indonesia 14410 industrial@nano-ceramic.com Distribution Projects Parama 62 813 1772 4688