Conens Page Conens Page... 2 A. Operaing he PCX 46 App... 3 B. Enering Engineers Menu... 4 1. Engineers Menu: Dae + Time... 4 2. Engineers Menu: Learn Wireless Devices... 4 3. Engineers Menu: Program Inpus... 5 4. Engineers Menu: Program EOL?... 6 5. Engineers Menu: Insall RIXs... 7 6. Engineers Menu: Program Oupus... 7 Program Oupu Types... 9 7. Engineers Menu: Insall Keypads/Readers... 10 8. Engineers Menu: Program Timers... 11 9. Engineers Menu: Change Codes... 12 10. Engineers Menu: Volume Conrol... 13 11. Engineers Menu: Sysem Opions... 14 12. Engineers Menu: View Even Logs... 16 13. Engineers Menu: Engineer Tess... 17 14. Engineers Menu: Diagnosics... 18 15. Engineers Menu: Engineer Resore Opions... 22 16. Engineers Menu: Communicaions... 23 17. Engineers Menu: Alarm Responses... 30 18. Engineers Menu: Opions Up/Downloading... 31 19. Engineers Menu: Sofware Revision... 34 20. Engineers Menu: Facory Defaul... 34 C. Eiing he Engineers Menu... 35 D. Sand Alone Keypad Menu... 36 E. Appendi 1: Alarm Even Type Tale... 37 F. Compliance... 40 G. Compliance... 41 NOTES... 42 NOTES... 43 Page: 2
A. Operaing he PCX 46 App Defaul Maser Manager Code: 1234 Defaul Engineer Code: 9999 Arming/Disarming Mehods: There are four differen devices ha may e used in he process of arming/disarming he alarm sysem; hese are he HomeConrol+ smarphone App, keypad, ag reader and keyfo. Buon Operaions a = Ei engineer menu / Selec area A. = Moves ackwards o he previous main menu iem / Selecs area B. = Selecs iems and eners menus c = Displays addiional informaion in he log / Scrolls o previous opion in a su-menu / Selecs area C. d = Moves forward in he log / Selecs area D. 0 1 2 3 = Selecs area 0, 1, 2, 3 f p = Used for acivaing Fire and PA alarms (If enaled y engineer) [ ] = Direcional uons (used for choosing opions and moving hrough e). = Moves forward in he main menu and su-menu / Eis opion o su-menu and su-menu o main menu. How o navigae hrough he menu's = NO - Press o move forward when in Engineer or Maser Manger mode = BACK - Press o move ackward when in Engineer or Maser Manger mode = YES - Press o ener in a sumenu or opion when in Engineer or Maser Manger mode ] = Press o move from one opion ino anoher opion while in a sumenu a = Press o quick ei he Engineer Menu from any main menu (wrien in capial leers) c = CANCEL - Press o move ack from one programmale opion o he previous opion. Main menus are indicaed wih capial leers and end wih a quesion mark (?), for eample LEARN WIRELESS DEVICE?. The su-menus are indicaed wih small leers and hey also end wih a quesion mark, for eample Conrol Inpus?. Programmale opions are indicaed wih small leers and do no finish wih quesion mark (?) u Yes/No or oher opions are offered, for eample Bypass PA/Fire In order o navigae in he menu sysem one has o answer he quesions in he main and su menus. For eample, if he quesion is LEARN WIRELESS DEVICES?. Pressing will ring you in he su-menu Conrol Inpus?. Pressing (YES) will ake you o he programmale opions of his sumenu. Pressing will ake you ou of he individual opion, will move you up from one su-menu o he ne su-menu or ack o he main menu. Page: 3
Page: 4 DATE&TIME?Year(00-99)[07]Monh(1-12)[01]Day(1-31)[01]Hours(0-23)[00]Opions [0] No [1] YesSofwareClockAdjus[+00]Minues(0-59)[00]LEARNWIRELESSDEVICES? Timezone?[083]London+00:00 (Selec Timezone) SummerTimeAdj?No[0] B. Enering Engineers Menu 1. Engineers Menu: Dae + Time 2. Engineers Menu: Learn Wireless Devices PCX-46Time0:25cEnerYourCode[*]DATE&TIME?Engineer Code Engineer Menu Defaul Engineer Code: 9999 NOTE: The Engineer can only disarm if i was armed iniially wih he engineer code.
Page: 5 3. Engineers Menu: Program Inpus LEARNWIRELESSDEVICES?LearnInpus?PROGRAMINPUTS? LearnDevices?Inpu01Availale[09]Learning.DeleeDevices?Inpu01Learned[09]DeleeAl?EnerYourCode[2000] InpusDeleed! InpuLearn InpuDeleed!Inpu01Learn[09] Inpu01Availale[09] Inpu01Availale[09] LearnBels?LearnDevices?SelecBelAvailale[1]Learning.DeleeDevices?SelecBelLearned[1]DeleeAl?EnerYourCode[2000] BelsDeleed! BelLearn! BelDeleedSelecBelLearn[1] SelecBelAvailale[1]SelecBelAvailale[1] 09-40 09-40 09-40 09-40 09-40 1 or 2 1 or 2 1 or 2 NOTE: This funcion can only e used if a PCX-RIX32-WE (Enforcer wireless epander) is insalled on he PCX 46 App. NOTE: Keyfos are learn and programmed from he Maser Manager Menu
Page: 6 4. Engineers Menu: Program EOL? PROGRAMINPUTS?Inpu[01]Inpu01PROGRAMEOL? InpuType[07]EnryDelay1InpuInArea[A]CommonInpuNo[0]ChimeNo[0]AlowBypassYes[1]DouleKnockNo[0]CominedInpuNo[0]NormalyOpenNo[0]MaskTesNo[0]NonAciviyInpNo[0]SpecialLogNo[0]InpuTypes:[00]Unused[01]Fire[02]Gas[03]PA*[04]SilenPA*[05]Tamper[06]Insan[07]EnryDelay1*[08]Folow[11]PushToArm[12]Swicher[13]24Hour[15]Su-AreaConrol[16]Faul[17]ArmingConrol[18]Shun[19]DisarmOnly*[20]KeyswichLachd*[21]EnryShock[22]LineFaul[23]KeyswichPulsed*[29]Inerior[32]Flood[39]CCTV[40]Perimeer[41]Parol/Keyo[42]Medical[43]EnryDelay2* InpuAriues? InpuDescripion?EnerNumer:Inpu01EnerName: *Theseinpusypescannoeypassed*Ifheseinpuypesareused,hesysemwilnocomplyoEN50131-1SecuriyGrade2or3IneriaInpu?No[0]GrossAack[04]PulseCoun[01] Chime:[0]No[1]Single[2]FolowCominedInpu:[0]No[1]YesNormalyOpen:[0]No[1]YesMaskTes:[0]No[1]YesNonAciviyInp[0]No[1]YesDouleKnock:[0]No[1]YesAlowBypass:[0]No[1]YesGrossAack[04]-[99]m/sPulseCoun[01]-[20]secsSpecialLog:[0]No[1]Arm[2]Disarm[3]AlwaysCommonInpu:[0]No[1]YesAreas0123ABCD
Page: 7 5. Engineers Menu: Insall RIXs 6. Engineers Menu: Program Oupus PROGRAMEOL?ChooseEOLRange1K/1K*[0]INSTALLRIXs? ChooseEOLRange:[0]1K/1K*[1]4K7/2K2*[2]4K7/4K7*[3]4K7/2K2*WideINSTALLRIXs?RIXAddress:[0]PROGRAMOUTPUTS?RIXInsaledNo[0]EnerName:_ IfYesIfNo Opions:[0]No[1]Wired[2]WirelessOpions:[0]RIXAddress0[1]RIXAddress1[2]RIXAddress2[3]RIXAddress3*Indicaes he value of he Single End of Line resisor Wired Epanders: PCX-RIX8i, PCX-RIX8+, PCX-RIX8+PSU Wireless Epanders: PCX-RIX32-WE Please see he Programming Reference Manual for he full inpu mapping
Page: 8 PROGRAMOUTPUTS?EndsaionPGMs? BELLPGM[0014]BelAnySTBPGM[0016]SroeAnyPGM[0000]NoUsed RIXModulePGMs?ROXModulePGMs?KeypadPGMs?ReaderPGMs?UserOupus?RIXAddress:[0]PGM1[0000]NoUsedROXAddress:[0]DeviceAddress:[1]PGM1[0000]NoUsedReaderAddress:[0]PGM1[0000]NoUsedUserOupuNo.[01]UserOupuTypeLached[0]UserOupuTime[01]UserOupuName INSTALLKEYPADS/READERS? RepeaforPGM2oPGM4EnerName:_RepeaforPGM2oPGM16ROXInsaled:No[0]PGM1[0000]NoUsed PGM2[0000]NoUsed Endsaion=MainPanelPGM=ProgrammaleOupusSTB=SroeXPGM1[0000]NoUsedATEPGM1[0001]Fire AddressOpions:[0]AddressOpions:[0],[1].[2],[3]AddressOpions:[0],[1].[2],[3]UserOupuType:[0]Lached[1]PulsedUserOupuNo:[00]o[20]Opions:BELLPGM,STBPGM.PGM.s=SeeOupuTypeTaleonfolowingpage.XPGM1:RepeaforXPGM2ATEPGM1:RepeaforATEPGM1-10ForalPGMopionsseeOupuTypeTaleonfolowingpage.UserOupuTime:IfPulsed:[01]-[99]secondsAddressOpions:[0],[1].[2],[3]
Program Oupu Types Opions [0000] No Used [0021] Ei Sars Any [0042] PIR LED Enale [0066] ATE Pin no used [0242-0260] Area C [0001] Fire [0022] Final Arm Any [0043] Follow Tes [0067] Follow Chime [0262-0280] Area D [0002] PA Any [0023] STB If Arm Fail [0044] Off During Tes [0170-0199] User Defined 1-30 [0282-0300] Area 0 [0003] Burglary Any [0024] Unale To Arm [0048] Walk Tes [0202] PA A [0302-0320] Area 1 [0004] Final Arm All [0025] Keyswich Disarm [0049] Deecor Masked [0203] Burglary A [0322-0340] Area 2 [0005] Open Afer Alarm [0026] Arm Wih Bypass [0050] Follow 24 Hr [0204] Final Arm A [0342-0360] Area 3 [0007] Tamper Any [0027] Pulsed Burglar Any [0051] Line/GSM Faul [0207] Tamper A [0620-0639] Logic Gaes 0-20 [0008] Duress Any [0028] Power Faul [0052] AC Mains Fail [0208] Duress A [1001-1046] Inpus 01-46 [0009] PA Device Any [0031] Enry [0053] Baery Faul [0209] PA Device A [0010] Gas [0032] Ei [0054] Low Vols [0210] Fire Rese A [0011] Arm Fail [0033] Enry/Ei [0055] Gloal Faul 1 [0213] Sysem Ready A [0012] Enry Deviaion [0034] Lighs [0056] Gloal Faul 2 [0214] Bell A [0013] Sysem Ready Any [0035] Follow Inpu [0057] German Relay [0216] Sroe A [0014] Bell Any [0036] Shun Faul [0058] Guard Code Used [0217] Bypass on Rearm A [0016] Sroe Any [0037] Resore 1 [0059] Engineer Access [0218] Burglary A [0017] Bypass Rearm Any [0038] Resore 2 [0060] Follow Power Up [0219] Ready A [0018] Burglary Any [0039] PIR Lach 1 [0063] Tes UK STU [0220] Ei Sars A [0019] Ready All [0020] Ei Sars All [0040] PIR Lach 2 [0041] AC Mains Good [0064] Pre RM Service [0065] Follow NAT [0222-0240] Area B Page: 9
Page: 10 7. Engineers Menu: Insall Keypads/Readers INSTALLKEYPADS/READERS?DeviceAddress[0]PROGRAMTIMERS? DeviceTypeKeypad[0]DeviceArmsArea[0123ABCD]DeviceDisarms[0123ABCD]Opions:[0]Keypad[1]Reader[2]NoUsed DeviceinArea[0123ABCD]IfReaderReaderis[0]Arm/DisarmOpions:[0]Arm/Disarm[1]Arm/DisarmSu-Area[2]AccessConrol[3]DisarmOnly[4]EnryDoorConrolDeviceName?EnerNumer:Device0 EnerName:_ IfKeypad DeviceArmsArea[0123ABCD]DeviceDisarms[0123ABCD]DeviceinArea[0123ABCD] NoUsed AddressOpions:[0]OnlyforKeypad[1]KeypadorReader[2]KeypadorReader[3]KeypadorReader
Page: 11 8. Engineers Menu: Program Timers PROGRAMTIMERS?AEnryTime1Seconds[030]AEnryTime2Seconds[030]AEiTimeSeconds[030]ABelTimeMinues[03]ACFailDelayMinues[005]NumerRe-arms[3]SroeTimeMinues[00]BelDelayMinues[00]DouleKnockSeconds[10]DelaySendEnrySeconds[000]FireBelTimeMinues[99]ArmFailWarningMinues[00]NATDayTimerDays[00]NATHoursTimerHours[00]WLsSupervnTimeHours[02]WLJammingTimeSeconds[100]ServiceTimerDays[000]CHANGECODES? RepeaforAreas0,1,2,3,B,CandD FinalDoorDelaySeconds[005]LineFaulDelaySeconds[250]GuardCodeDelayMinues[03]ArmFailTimeSeconds[250]PulsdBurglrAnySeconds[005] LW=WirelessNAT=NonAciviyTimerConf=ConfirmSupervn=WirelessSupervisionTimeBurglr=Burglary0-255Seconds0-255Seconds0-255Seconds2-15Minues0-99Minues0-99Minues0-9Times0-250Minues0-255Seconds0-75Seconds0-255Seconds0-250Seconds0-255Seconds0-10Minues1-99Minues0-99Minues0-14Days0-23Hours0-255Seconds0-99Hours0-100Seconds0-365Days
Page: 12 9. Engineers Menu: Change Codes CHANGECODES?ChangeDuress/GuardCodes?Empy[01EnerUserCode[*]ChangeMaserManagerCode?ChangeEngineerCode?MaserManagerCode[*]EngineerCode[*] UserTypeDuress[2]UserInArea[0123ABCD]UserArmOpionsDisarm/Arm[0]AreaArmChoiceNo[0]UserNameVOLUMECONTROL? UserInArea[0123ABCD]UserArmOpionsDisarm/Arm[0]AreaArmChoiceNo[0]UserName_ Areas0123ABCDUserType:[2]Duress[3]GuardAreaArmChoice[0]No[1]YesUserArmOpions[0]Disarm/Arm[1]DisarmOnly[2]ArmOnly[3]NoneUserArmOpions[0]Disarm/Arm,[1]DisarmOnly[2]ArmOnly,[3]NoneAreaArmChoice[0]No[1]YesAreas0123ABCD
Page: 13 10. Engineers Menu: Volume Conrol VOLUMECONTROL?AEnry[4] Repeafor0,1,2,3,B,C,andD[4]AEi[4]Repeafor0,1,2,3,B,C,andD[4] Alarm[7]Fire[7]Technical[4]24Hour[4]Chime[4]CodeSopSoundYes[1]SilenTechAlerNo[0]DisaleCalFlNo[0] SYSTEMOPTIONS? VolumeOpions:[0]Silen[1]->[4]Buzzer[5]->[7]LouderInernalSounderSilenTechAler[0]No[1]YesDisaleCalFaul[0]No[1]YesCodeSopSounds[0]No[1]Yes
Page: 14 11. Engineers Menu: Sysem Opions 11.1 Engineers Menu: Sysem Opions->Opions SYSTEMOPTIONS?Opions?REVIEWLOGS? ArmWihTamperYes[1]ArmWihTamper[0]No[1]YesEiOpions?SysemDisplays? ArmifModemFlYes[1]ArmwihTec/FlYes[1]ArmFail=AlarmNo[0]ArmAcknowledgeSroeFlash[1]BypassonRe-ArmNo[0] ArmifModemFaul[0]No[1]YesArmWihTechnicalFaul[0]No[1]YesArmFail=Alarm[0]No[1]YesDoBaeryLoadTes[0]No[1]YesArmAcknowledge[0]None[1]SroeFlash[2]BelSquawk[3]Boh ForcedArmYes[1]TagOnlyDisarmNo[0]InverATEPGMsNo[0]SofwareClockNo[0]KeypadPAKeyBel+Signal[2]ManagerProgPAYes[1]TagDisarm+DoorYes[1]KeypadFireKeyYes[1]ArmwihSpvnFlYes[1]KeyfoOnEnryNo[0]6DigiCodesNo[0]BypassonRe-Arm[0]No[1]YesForcedArm[0]No[1]YesTagOnlyDisarm[0]No[1]YesQuickArm[0]No[1]YesInverATEPGMs[0]No[1]YesSofwareClock[0]No[1]YesKeypadPAKey[0]Silen+Digi[1]BelsOnly[2]Bel+Signal[3]DisaledManagerProgPA[0]No[1]YesATEInpu[0]UKSTU[1]ATELineFl[2]Boh[3]NoneTagDisarm+Door[0]No[1]YesKeypadFireKey[0]No[1]YesFor'SysemDisplays',seehefolowingpage.For'EiOpions',seehefolowingpage. ArmwihSupervisionFl[0]No[1]YesKeyfoOnEnry[0]No[1]YesDownloadifArmed[0]No[1]Yes DoBaLoadTesNo[0]QuickArmNo[0]ATEInpuNone[3]6DigiCodes[0]No[1]Yes DownloadifArmedNo[0]
Page: 15 11.2 Engineers Menu: Sysem Opions -> Sysem Displays / Ei Opions SYSTEMOPTIONS?Opions?REVIEWLOGS? AreaATeAreaAAreaATe(16Characers)EiOpions?SysemDisplays? RepeaforArea0,1,2,3,B,C,andDTopDisplayTePCX46DisplayIfArmedYes[1]DisplayAlarmsYes[1]ReadyLEDOnYes[1] TopDisplayTe(16Characers)DisplayIfArmed[0]No[1]YesDisplayAlarms[0]No[1]YesReadyLEDOn[0]No[1]Yes DisplayPAsYes[1]DsplySilenPAsYes[1]DisplayInpusYes[1]DisplayLEDOnYes[1] DisplayPAs[0]No[1]YesDisplaySilenPAs[0]No[1]YesDisplayInpus[0]No[1]Yes DisplayInpus[0]No[1]YesFor'Opions',seehepreviouspage. AEiModeTimed[0] RepeaforArea0,1,2,3,B,C,andDA Ei Mode [0] Timed [1] Final Door [2] Timed/Final [3] Push To Arm
Page: 16 12. Engineers Menu: View Even Logs REVIEWLOGS?PanelLog?ENGINEERTESTS? 01/0100:11:44AlarmSilencedUser01Access/CrlLog? RepeaforalEvensSarofLog c 01/0100:11:44UseropenDoorUser01RepeaforalEvensSarofLog c Tooainmoreinformaiononheeven:Pressc Tooainmoreinformaiononheeven:Pressc If a device on he PCX 46 App sysem is no insalled correcly or has een los from he us, a device fail will e presen. An eample of each faul is as follows: - Failure on he panel = Conrol Panel, Baery Faul - Keypad address 3 (0-5 availale) failure = Device 3, Device Fail Kpd - Inernal/Eernal Tag Readers address 2 (1-5 availale) failure = Device 2, Device Fail Trd - Remoe Inpu Epander address 0 (0-3 availale) = RIX-00, Device Fail ZEM - Remoe Oupu Epanders address 0 (0-1 availale) = ROX-00, Device Fail ROX If a locaion name is enered for a device, he locaion will e displayed on he keypad insead of he address, for eample insead of Device 3 for he Keypad will display Enrance Corridor.
Page: 17 13. Engineers Menu: Engineer Tess ENGINEERTESTS? WalkTes?WalkTesAreas[0123ABCD]WalkTesInpusInpu01SoakTes?SoakInpus[-]SoakDaysLef[00]WalkoacivaeeachinpuBelTes?IniialSoak[00]TesingBel.BaeryLoadTes?TesPGMs?TesingBaery13.4VBaeryTesPassed!PGMTes:[0000]SendTesCal?AreYouSure?SoakInpus[01]Inpu01SoakDaysLef:[00-99]DaysSarIniialSoak:[00-99]Days DIAGNOSTICS? WalkTesInpusCompleed! ChoosePGMNumer:[0000]o[1046]By-PassFire/PA?By-PassFire/PANo[0] TesInProgress[PGMType] By-PassFire/PA[0]No[1]Yes
Page: 18 14. Engineers Menu: Diagnosics 14.1 Engineers Menu: Diagnosics->Wireless Devices DIAGNOSTICS?WirelessDevices?ENGINEERRESTOREOPTIONS? WiredDevices?ViewBelsSignalSrengh?ViewInpusBaerySaus?PleaseWai.299Communicaions?ViewBelsBaerySaus?3-- PleaseWai.299 InpuReadings:[C]Close,[O]Open,[T]Tamper,[-]Nolearn,[F]FaulWirelessReadings:[-]NoDeviceInsaled[?]Waiingforinfo[0]Missing[1]Weak[2]Good[3]EcelenViewInpus?RIXInpus?[0] ViewInpusSignalSrengh?PleaseWai.2993231--Inpu[01]Ecelen[100] Bel[01]Ecelen[080]Inpu[01]Good PleaseWai.299Inpu[01]Good CCCOCCC--RIXInpus0-3 NOTE: Wireless Devices are only availale if he PCX-RIX32-WE is insalled.
Page: 19 14.2 Engineers Menu: Diagnosics->Wired Devices & Communicaions DIAGNOSTICS?WirelessDevices?ENGINEERRESTOREOPTIONS? WiredDevices?ViewPSUs?EndsaionPSU:13.5VCommunicaions? CCCCOCCC RIXInpus?[0] InpuReadings:[C]Close,[O]Open,[T]Tamper,[-]Nolearn,[F]FaulViewInpus?EndsaionInp?CCCOCCCOInpu[01][1]>25.3k Inpu[09][1]>1KRIXPSU:[0] KeypadVols[0]13.9VReaderVols[1]13.9V ROXPSU:[0] RIXInpus0-3RIXInpus0-3ROXInpus0-3Keypad0-5Reader0-5 KeypadInp?[0]CCInpu[41][1]>1KReaderInp?[0]CCInpu[41][1]>1KKeypad0-5Reader0-5 Caliraion?ManufacurersAccessOnyl
Page: 20 14.3 Engineers Menu: Diagnosics->Communicaions (if DIGI-GSM / DIGI-GPRS insalled) 14.4 Engineers Menu: Diagnosics->Communicaions (if Digi-1200 (PSTN) insalled) DIAGNOSTICS?WirelessDevices?ENGINEERRESTOREOPTIONS? WiredDevices?Communicaions? LasPoldCloudLasAppConacGSMSignalValue20AppSausPolingCloudARCSausLasPoldARC GSM Signal Value Signal: 0-31 No Signal: --.-- App Saus: Iniialising: The panel is aemping o connec No Nework: Nework no availale Basic Nework: Nework availale Full Nework: The panel is logged on o GPRS nework Polling Cloud: The panel is polling he cloud ARC Saus: Iniialising: The panel is aemping o connec No Nework: Nework no availale Basic Nework: Nework availale Full Nework: The panel is logged on o GPRS nework Polling ARC: The panel is polling he ARC Las App Conac: Displays dae and ime of las successful App conac Never - displayed if he App has never een conaced Las Polld Cloud: Displays dae and ime of las successful poll o he cloud Never - displayed if he cloud has never een polld Las Polld ARC: Displays dae and ime of las successful poll o he ARC Never - displayed if he ARC has never een pollddiagnostics?wirelessdevices?engineerrestoreoptions? WiredDevices?Communicaions? PSTNLineSausPresen
Page: 21 14.5 Engineers Menu: Diagnosics->Communicaions (if DIGI-LAN insalled) DIAGNOSTICS?WirelessDevices?ENGINEERRESTOREOPTIONS? WiredDevices?Communicaions? ARCSausAppSaus:IPAddress:SuNeMask:Gaeway:LasAppConac LasPoldARCLasPoldCloud Displays he IP address of he DIGI-LAN (if insalled) Displays he Sune Mask of he DIGI-LAN (if insalled) Displays he IP address of he gaeway App Saus: Iniialising - The panel is aemping o connec No Nework - There is no nework availale Polling Cloud - The panel is polling he cloud App Saus: Iniialising - The panel is aemping o connec No Nework - There is no nework availale Polling ARC - The panel is polling he ARC Displays he dae and ime when he App las successfully conaced he panel Displays he dae and ime when he panel las successfully polld he Cloud Displays he dae and ime when he panel las successfully polld he ARC
Page: 22 15. Engineers Menu: Engineer Resore Opions ENGINEERRESTOREOPTIONS?ResoreBurglaryNo[0]ResorePANo[0]ResoreTamperNo[0] ResoreSoakNo[0]ResoreFaulsNo[0]AniCodeRsoreNo[0]COMMUNICATIONS? ResoreBurglary[0]No[1]BurglarAlarm[2]DoNoUseResorePA[0]No[1]YesResoreTamper[0]No[1]YesResoreFauls[0]No[1]YesAniCodeResore[0]No[1]YesResoreSoak[0]No[1]Yes
OMMUNICATIONS?pSeeworkU?ARALARRESPONSESignge16. Engineers Menu: Communicaions CMS? NApC-Up? Se-nali? USsigrnaSliMSn?gpFor 'App Se-up', see pages: 24 & 25 App Se-Up This funcion enales or disales communicaion wih he PyroniCloud and HomeConrol+ App. Refer o he User Manual for more informaion. For 'Nework Se-up', see page: 26. Nework Se-Up Programs he DIGI-GPRS, DIGI-LAN or DIGI-WiFi (for fuure use) o he PCX 46 App sysem. For 'ARC Signalling', see page: 27 o 28 Digi Modem Signalling Enales he PCX 46 App Panel o signal eiher Conac ID IP or SIA 3 IP, or using he PSTN modem i can signal Conac ID or SIA Levels 1 & 3. All IP deails and ARC seup are programmed in his menu. For 'User SMS Signalling, see page: 29 SMS Signalling Enales he PCX 46 App Panel o signal via SMS messaging as well as SMS remoe conrol. Page: 23
Page: 24 16.1 Engineer Menu: Communicaions-> App Se Up 16.1.1 Engineer Menu: Communicaions->App Se Up (Securiy Level: Normal) Cloud Password: A password is required o allow remoe access o he PyroniCloud. App Password: A password is required o allow remoe access o he HomeConrol+ App. AppSe-Up?AppPassword:_PolServer?No[0]EnaleAppNo[0]SysemIDAAAAAAAACloudPassword:SecuriySandard[0]Securiy[0]Sandard[1]HighEnaleApp[0]No[1]YesPolServer[0]No[1]Yes NOTE: When creaing passwords, please ensure ha he password uses a variey of upper case, lower case, numers and symols o ensure he es securiy possile. I is highly recommended o se his o Yes
Page: 25 16.1.2 Engineer Menu: Communicaions-> App Se Up (Securiy Level: High) EnaleAppNo[0] SysemID:AAAAAAAACloudPassword:KeyPar2ABCD-ABCD-ABCD-ABCD AreYouSure?KeyPar1ABCD-ABCD-ABCD-ABCDPoll Server [0] No [1] YesEnaleApp[0]No[1]YesGeneraeAppPasswordKey? Securiy [0] Sandard [1] High ViewAppPasswordKey?SendPasswordkeyinaePolServer?No[0]KeyPar2ABCD-ABCD-ABCD-ABCDKeyPar1ABCD-ABCD-ABCD-ABCD Moile#:PasswordsenSuccessfuly SecuriyHigh[1] AppSe-Up?To e sen o he user s moile phone so ha ONLY THEY know he App password. Numers can e enered wih or wihou an inernaional dialling code (e.g. +44). If you need o ener an inernaional dialling code o send he key o a foreign SIM card use he key o ener he + symol.
Page: 26 16.2 Engineer Menu: Communicaions-> Nework Seup NeworkSe-Up?GPRSAPN?ProgramGPRS? _GPRSUserID?_GPRSPassword?_ProgramLAN?ProgramWiFi?AuoSeupNo[0]WiFinoinsaled PanelIPAddress000.000.000.000PanlSuneMask000.000.000.000Gaeway000.000.000.0001sDNSIPAddr000.000.000.0002ndDNSIPAddr000.000.000.000AuoSeupYes[1] d Use of Auo IP seup is recommended
Page: 27 16.3 Engineer Menu: Communicaions-> Digi Modem Signalling (ARC) R16.3.1 Engineer Menu: Communicaions-> Digi Modem Signalling, and ARC Sign-Up (Securiy Level: Sandard) ACSignaling?Redials0-15TesCals[0]No[1]YesARCDeails:[1]Forma[149]ConacIDIPEvenTypes[0]Defaul1[1]Defaul2[2]Defaul3[3]CusomValidAreas[A]AreaARCAccounNo[0]AreaARCAccoun[0]No[1]YesOneARCAccoun_IfAreaARCAcc.isYESIfAreaARCAcc.isNOAreaAAccoun_RepeaforB,C,D_Redials[03]TimeOuSeconds[60]TesCalsNo[0]EvenTypesDefaul1[0]TimeOu0-99Seconds RegiserToARC?ARCSignUpIP:_...ARCSignUpPor:_SecuriySandard[0]ARCPassword:_ Connec.Handle0000-0000- ConnecoARC? Areyousure?ConnecedoARC Please see Appendi 1 for Even Types NOTE: If 'Tes Calls' is seleced as 'Yes', he following menu srings will e displayed: 'Sar Time Hours' and 'Se Time Minues': The ime he es call egins. 'Inerval Days', 'Inerval Hours' and 'Inerval Minues': The inerval ime eween each es call. See Even Types Page 37 When enering Connecion Handle Code Use he uon o ener leers and he numer keys o ener numers.
Page: 28 R16.3.2 Engineer Menu: Communicaions->ARC Sign Up (Securiy Level: High) ACSignaling?Redials0-15TesCals[0]No[1]YesARCDeails:[1]Forma[149]ConacIDIPEvenTypes[0]Defaul1[1]Defaul2[2]Defaul3[3]CusomValidAreas[A]AreaARCAccounNo[0]AreaARCAccoun[0]No[1]YesOneARCAccoun_IfAreaARCAcc.isYESIfAreaARCAcc.isNOAreaAAccoun_RepeaforB,C,D_Redials[03]TimeOuSeconds[60]TesCalsNo[0]EvenTypesDefaul1[0]TimeOu0-99Seconds RegiserToARC?ARCSignUpIP:_...ARCSignUpPor:_SecuriyHigh[1]ReceivekeyySMS?Key-10000-0000-0000-0000-Key-20000-0000-0000-0000-Key-30000-0000-0000-0000-Key-40000-0000-0000-0000-Key-CRC Waiingforkey. KeyreceivedickoconinueConnecoARC?Areyousure?ConnecedoARC
Page: 29 16.4 Engineer Menu: Communicaions-> SMS Signalling NOTE 2: If 'Tes Calls' is seleced as 'Yes', he following menu srings will e displayed: 'Sar Time Hours' and 'Se Time Minues': The ime he es call egins. 'Inerval Days', 'Inerval Hours' and 'Inerval Minues': The inerval ime eween each es call. UserSMSSignaling?Redials0-15TesCals[0]No[1]YesSMSDeails:[01]UserMoile:_ValidAreas[A]UserSMSCommonMessage?CommonMessage:Redials[09]TimeOuSeconds[99]TesCalsNo[0]EvenTypesDefaul1[0] SMSArmYes[1] SMSConrolEnale?SMSDisarmYes[1]SMSSausYes[1]SMSOupuYes[1]SMSNo.ChangeYes[1]SMSSarUDLYes[1]SMSArm[0]No[1]YesSMSDisarm[0]No[1]YesSMSSaus[0]No[1]YesSMSOupu[0]No[1]YesSMSNo.Change[0]No[1]YesSMSSarUDL[0]No[1]Yes TimeOu0-99EvenTypes[0]Defaul1[1]Cusom Areas[0123ABCD]01-10NOTE 1: WHEN ENTERING MOBILE NUMBER - Numers can e enered wih or wihou an inernaional dialling code (e.g. +44). If you need o ener an inernaional dialling code o message a foreign SIM card use he key o ener he + symol. See NOTE 1
Page: 30 17. Engineers Menu: Alarm Responses ALARMRESPONSE?AreaAsaraSignalDigi[3]AreaAsopaSignalDigi[3]Repeafor0,1,2,3,B,C,&DSarARepeafor0,1,2,3,B,C,&DSopAFiresaraSignalDigi[3]FiresopaSignalDigi[3]GassaraSignalDigi[3]GassopaSignalDigi[3]PAsaraSignalDigi[3]PAsopaSignalDigi[3]24HoursopaSignalDigi[3]24HoursaraSignalDigi[3]AnyAlarmsSarSignalDigi[3]IfAreasArmed[-]AnyAlarmsSopSignalDigi[3]IfAreasArmed[-] OPTIONSUP/DOWN-LOADING? SarsAOpions:[0]Keypads[1]InSounders[2]BelsOnly[3]SignalDigiSopsAOpions:[0]Keypads[1]InSounders[2]BelsOnly[3]SignalDigiIfAreasArmed:[ABCD]IfAreasArmed:[ABCD]
Page: 31 18. Engineers Menu: Opions Up/Downloading 18.1 Engineers Menu: Opions Up/Downloading (via DIGI-1200 (PSTN)) OPTIONSUP/DOWN-LOADING?DownloadyPSTN[1] DialModeOpionAuo-Answer[0]DialInOpionsDirecDial[0]NumerofRingsBeforeAMC[05] PrefiTelNoRedials[03]Dial Mode Opion: [0] Auo Answer [1] Panel Dials [2] Dial Back Dial In Opions: [0] Direc Dial [1] AMC Dial Numer of Rings: [00] No. of Rings - [15] No. of Rings SOFTWAREREVISION? AMC=AnswerMachineCompaileUDL=Upload/DownloadDownload By [0] None [1] PSTN [2] RS-232 [6] Cloud UDLPasswordSieName_UDLPrioriyLow[1]UDL Prioriy [0] High [1] Low Redials 0-15
Page: 32 18.2 Engineers Menu: Opions Up/Downloading (via RS232 lead) 18.3 Engineers Menu: Opions Up/Downloading (via Cloud) 18.3.1 Engineer Menu: Opions Up/Downloading (Via Cloud) - Securiy Level: Sandard OPTIONSUP/DOWN-LOADING?DownloadyRS232[2] UDLPassword_UDLPrioriyHigh[0] SOFTWAREREVISION? Download By [0] None [1] PSTN [2] RS-232 [6] Cloud UDL Prioriy [0] High [1] Low OPTIONSUP/DOWN-LOADING?DownloadyCloud[6] SysemID:AAAAAAAASecuriySandard[0]SieName_PolServer?No[0]UDLPassword_SOFTWAREREVISION? UDL=Upload/DownloadUDL Prioriy [0] High [1] Low Poll Server [0] No [1] YesSysemPassword: Securiy [0] Sandard [1] High UDLPrioriyHigh[0] Download By [1] PSTN [2] RS-232 [6] Cloud
Page: 33 18.3.2 Engineer Menu: Opions Up/Downloading (Via Cloud) - Securiy Level: High OPTIONSUP/DOWN-LOADING?DownloadyCloud[6] SysemID:AAAAAAAASecuriyHigh[1]KeyPar2ABCD-ABCD-ABCD-ABCD AreYouSure?KeyPar1ABCD-ABCD-ABCD-ABCDSOFTWAREREVISION? Poll Server [0] No [1] Yes Download By [1] PSTN [2] RS-232 [6] Cloud GeneraeUDLPasswordKey? Securiy [0] Sandard [1] High ViewUDLPasswordKey?SendPasswordkeyinaePolServer?No[0]UDLPassword_KeyPar2ABCD-ABCD-ABCD-ABCDKeyPar1ABCD-ABCD-ABCD-ABCD Moile#:PasswordsenSuccessfulySieName UDLPrioriyHigh[0] UDL Prioriy [0] High [1] Low
Page: 34 19. Engineers Menu: Sofware Revision 20. Engineers Menu: Facory Defaul SOFTWAREREVISION?PCX46V10.000008DA2EnforcerFACTORYDEFAULT? WirelessHuV02.23 V2.66GSM/GPRSSMSandApps V1.07ETHERNETAppsIfGSM/GPRSConneced:IfLANModuleConneced: FACTORYDEFAULT?DefaulCode[]EXITENGINEERMENU?PleaseWaiFacoryDefaulComplee!ClearWLsDaa?ClearCodes?ClearLogs?WirelessDaaClearedCodeshaveeenCleared!LogshaveeenCleared! DefaulCodes:[2000]SandardDefaul[2002]EN50131SeingsDefaul
Page: 35 C. Eiing he Engineers Menu EXITENGINEERSMODE?PCX-46Time0:25cDATE & TIME? DATE&TIME?PCX-46Time0:25caPressheAkeyoeiEngineersmodefromanymainmenuiem(displayedincapialleers)OR
Page: 36 D. Sand Alone Keypad Menu SECURITYCODE[]ADDRESS[-]Volume Opions: [0] Silen [1]->[4] Buzzer [5] ->[7] Louder Inernal Sounder LANGUAGEENGLISH[00]ZONESTATUS:1:<0.1k2:<0.1kTAGID:PRESENTTAG.FACTORYRESET[]BACKLIGHTFORCE[1]PA/FireTimer[0]MASTERVOLUME=======[7]Backligh Force [0] No [1] Yes PA/Fire Timer [0-5] Ener 2000 for facory rese KEYCLICKVOLUME=======[7]TAGVOLUME=======[7]PCX46Time02:53cEner 00 a a a a a a a Press and hold D key a a apressandholdd key for 5 seconds NOTE: This menu is dedicaed o he keypad iself. This menu is mosly used for he following feaures: Keypad Address, Keyclick Volume, and Backligh Force. NOTE: The keypad on he PCX mus e always programmed o '00'
E. Appendi 1: Alarm Even Type Tale Alarm Evens SIA 3 Conac ID Even Types for CID Signalling Even Types for SMS Signalling = Enale, = Disale Alarm Evens in EVENT TYPE 1 Final Arm CL 3401 Sysem Auo Armed CA 3403 Sysem Rearm CP 3463 Alarm Evens in EVENT TYPE 2 Forced Arm CF 3401 Sysem Auo Disarmed Auo Arm cancelled y user OA 1403 CE 3405 Alarm Evens in EVENT TYPE 3 Special Disarm OP 1401 Access Ei Reques DX 1425 Alarm Evens in EVENT TYPE 4 Arm Fail CI 1454 Alarm Evens in EVENT TYPE 5 Fire Inpu Acive FA 1110 Burglary Alarm BA 1130 Perimeer Alarm 1131 Inerior Alarm BA 1132 Flood Acive WA 1154 24h Alarm BA 1133 Enry Delay Alarm BA 1134 Tamper Alarm TA 1137 Epander Device Tamper TA 1137 Case Tamper TA 1137 Tamper on Sensor TA 1144 Gas Alarm GA 1151 Keyo Alarm 1250 Bell Tamper TA 1321 Radio Jamming XQ 1344 Radio supervision failure UY 1381 Radio low aery XT 1384 No Inpu Aciviy - sen NA 1680 Alarm Evens in EVENT TYPE 6 (recommended o use wih SMS forma only) Medical Alarm Send MA 1100 Once Fire Alarm Send FA 1110 Once PA Alarm Send Once PA 1120 Silen PA Alarm Inpu send Once Burglary Alarm Send Once Perimeer Alarm Send Once Inerior Alarm Send Once 24h Alarm Send Once Enry Delay Alarm Send Once Tamper Alarm Send Once Gas Alarm Send Once Keyo Alarm Send Once HA 1122 BA 1130 1131 BA 1132 BA 1133 BA 1134 TA 1137 GA 1151 1250 Alarm Evens in EVENT TYPE 7 Alarm Silenced OR 1406 Alarm Evens in EVENT TYPE 8 Confirmed Oupu BV 1139 CCTV Line fail (Line fail inpu) CCTV Line OK (Line fail inpu) Telecom Line OK (modem) Alarm Evens in EVENT TYPE 9 LT 1351 LR 3351 LR 3351 Alarm Evens in EVENT TYPE 10 RS 485 Faul IA 1300 Low Vols AT 1302 Baery Criical YT 1302 Baery Load Fail YT 1309 Baery Missing YT 1311 Page: 37
Baery Resore YR 3311 Modem Failed 1330 Epansion Device Fail Epansion Device Resored ET 1333 ER 3333 DIGI Fail Comms 1350 STU comms failure on STU inpu indicaion. Telecom line faul (modem) Bypass Device Faul a Rearm 1350 LT 1351 UB 1572 Alarm Evens in EVENT TYPE 11 Sysem Resar 1305 Rese To Facory Defaul 1305 Deleed Code JX 1306 Changed Code JV 1306 Sie Changed YG 1306 Code Added JV 1306 Engineer rese needed 1313 Engineer Rese RN 3313 Logs Cleared 1621 Logs nearly full 1623 Clock Se To JT 1625 PC - Clock se o JT 1625 Alarm Evens in EVENT TYPE 12 Disarm Sysem OP 1401 Alarm Evens in EVENT TYPE 13 Engineer Access LB 1627 Engineer Ei LX 1628 Alarm Evens in EVENT TYPE 14 Door Lef Open DL 1426 Door Forced DF Alarm Evens in EVENT TYPE 16 Invalid Tag JA 1421 Inpu Special Log Swicher Opened Alarm Evens in EVENT TYPE 17 UA 1146 Inpu Special Log Swicher Closed Inpu Special Log Opened Inpu Special Log Closed Alarm Evens in EVENT TYPE 18 UR 3146 Alarm Evens in EVENT TYPE 19 UA 1146 Alarm Evens in EVENT TYPE 20 UR 3146 Alarm Evens in EVENT TYPE 21 Su Area Disarmed OG 1402 Su Area Silenced OG 1402 Su Area Inpu Disarmed Su Area Inpu Silenced OG 1402 OG 1402 Shun Closed 1402 Alarm Evens in EVENT TYPE 22 Su Area Armed CG 3402 Su Area Inpu Armed CG 3402 Shun Opened 3402 Alarm Evens in EVENT TYPE 23 Su Area Alarm BA 1130 Alarm Evens in EVENT TYPE 24 Inpu Walk Tesed 1607 Alarm Evens in EVENT TYPE 25v Burglary Resore BH 3130 Perimeer Resore 3131 Inerior Alarm Resore BH 3132 24h Alarm Resore BH 3133 Enry Delay Alarm Resore BH 3134 Tamper Resore TH 3137 Case Tamper Resore Tamper On Sensor Resore TR 3137 TH 3144 Gas Resore GH 3151 Keyo Resore 3250 id line shor resore TR 3300 Page: 38
Fuse fail resore IR 3300 Bell Tamper Resore YH 3321 Radio Jamming resore Radio Supervision resore. Radio low aery resore XH 3344 UJ 3381 XR 3384 Alarm Evens in EVENT TYPE 26 Tes Call RP 1602 Alarm Evens in EVENT TYPE 27 Mains Fail Alarm AT 1301 Mains Fail Alarm Resore AR 3301 Alarm Evens in EVENT TYPE 28 Fire Alarm FA 1110 Fire Resore FH 3110 2 key PA PA 1120 2 key PA resore PR 3120 PA Alarm PA 1120 PA Resore PH 3120 Duress Code HA 1121 Silen PA Alarm Inpu Silen PA Alarm Inpu Resore HA 1122 HH 3122 Wrong Code Enry JA 1461 Alarm Evens in EVENT TYPE 29 Medical Alarm MA 1100 Medical Alarm Resore MH 3100 Alarm Evens in EVENT TYPE 30 Inpu Force Armed 1570 Inpu Bypassed a Rearm BB 1570 Inpu Bypassed BB 1570 Fire Inpu Bypassed FB 1571 24h Inpu Bypassed BB 1572 Alarm Evens in EVENT TYPE 31 Sopped Arming OP 1406 Aor 1406 PC dialled he panel 1412 NOTE: Avoid enaling even ypes 5 and 6 ogeher as his will cause doule reporing. Even ype 6: The evens in his even ype is sen only once in one arming period and his is why i is recommended ha his ype is used for SMS reporing Page: 39
F. Compliance The PCX conrol panel is complian o: EN50131-3:2009, EN50131-6:2008, EN50131-1:2006+A1:2009, EN50130-4:2011, EN50136-1:2012 EN50136-2:2013. The PCX 46 large conrol panel is complian o Securiy Grade 3 and Environmenal Class II. The PCX 46 small conrol panel is complian o Securiy Grade 2 and Environmenal Class II. GRADE 2 opion A,B,C and D wih DIGI-LAN (SP5) or DIGI-GSM (SP2) and DP1 (DIGI-LAN or DIGI-GSM wih DIGI-1200) The use of he DIGI-GPRS (SP5) or DIGI-LAN (SP5) opions Grade 3 opion A, B and D are suppored. NOTE: Reducion of range no suppored. All Wireless devices comply wih he following EU requiremens: ATS = Alarm Transmission Sysem. WD = Warning Device EMC Direcive 2014/30/EU Only he following are cerified:- Low Volage Direcive 2014/35/EU KX10DP-WE, KX12DT-WE, KX10DTP-WE, KX15DC-WE, KX25LR-WE, KX12DQ-WE DIGI-LAN KF4-WE, DIGI-GPRS, MC2-WE, DELTABELL-WE, DIGI-1200 R&TTE Direcive 1999/5/EC App HomeConrol+ no cerified IMQ-Securiy Sysems. And mee he following sandards where relevan: EN 61000-6-3:2007+A1:2011 EN 50131-1:2006+A1:2009 EN 50130-4:2011 EN 60950-1:2006+A12:2011 EN 50131-5-3:2005+A1:2008 ETSI EN 301489-3:2000 EMC. Generic emission sandard. Residenial, commercial and ligh indusry Alarm sysems - Inrusion and hold up sysems Immuniy requiremens for componens of fire, inruder and social alarm sysems Informaion echnology equipmen. Safey. General requiremens Grade 2. Inerconnecions for equipmen using radio frequency echniques EMC. Radio equipmen. Par 3: Shor range devices (SRD) 9kHz o 40 GHz ETSI EN 300 220 EMC. Receiver Class 1, Environmenal Caegory 1 CEPT/ERC Recommendaion 70-03 Anne 1 Complian operaion is only guaraneed when insalled and operaed according o he relevan insallaion and user manuals. Page: 40
G. Compliance Noificaion Equipmen Grade 2 / Opions A B C D Remoely powered audile WD (siren) 2 Opional Opional Opional Self-powered audile WD Opional 1 Opional Opional Main ATS ATS 2 ATS 2 ATS 2 ATS 3 Addiional ATS Opional Opional ATS 1 Opional GRADE 2 opion A,B,C and D wih DIGI-LAN (SP5) or DIGI-GSM (SP2) and DP1 (DIGI-LAN or DIGI-GSM wih DIGI-1200) The use of he DIGI-GPRS (SP5) or DIGI-LAN (SP5) opions Grade 3 opion A, B and D are suppored. App HomeConrol+ no cerified IMQ-Securiy Sysems. Access Levels Level 1: Access y any person; for eample he general pulic. Level 2: User access y an operaor; for eample cusomers (sysems users). Level 3: User access y an engineer; for eample alarm company personnel. Level 4: User access y he manufacurer of he equipmen. NOTE: Alarm, amper and faul indicaions will auomaically e cleared wihin 3 minues. If a user has finished viewing he informaion hey can erminae he display insanly y pressing he key. Access a levels 2, 3 and 4 may e achieved providing auhorisaion, equivalen o 1,000,000 key differs is achieved. Please noe: Technical funcions (e.g. gas, fire and flooding) are no securiy graded and fall ouside he scope of EN50131-1 and EN50131-3 Compliance laelling should e removed or adjused if non-complian configuraions are used. Page: 41
NOTES Page: 42
NOTES Page: 43
PCX 46 App Secure Holdings Pyroni House Braihwell Way Hellay Roherham S66 8QY Cusomer Suppor line (UK Only): +44(0)845 6434 999 (local rae) or +44(0)1709 535225 Hours: 8:00am - 6:30pm, Monday o Friday Email: cusomer.suppor@pyroni.com Wesie: www.pyroni.com