AIR/LIQUID HEAT EXCHANGERS PROCESS DRYING HEAT RECOVERY SPACE HEATING COOLING & CONDENSING BLAST COOLING CHEMICAL PLANTS CURING ROOMS DRYING KILNS FACTORIES GASIFICATION PLANTS GREENHOUSES PAPER MILLS PHARMACEUTICALS PLASTICS POWER GENERATION REFINERIES TEXTILES
A TRUSTWORTHY SUPPLIER We promise to deliver sound technical support, reliable products and dependable aftersales service. Our technical support service is always available with information on any of our products. Please do not hesitate to call. Peter Murphy Peter Murphy, Managing Director, Turnbull & Scott Established in 1933, Turnbull & Scott have earned an enviable reputation as a quality manufacturer of extended surface heat exchange units to improve cost efficiency for industrial processes and space heating. Our ethos embraces sound product development, quality build, informed customer support, delivery on time and responsive aftersales. We are proud of our manufacturing tradition and continue to develop products and services in answer to the challenges of the 21st century. From our base in Hawick, Scotland, we offer technical advice, design, customised build and installation of heat exchange solutions to clients worldwide. RECENT PROJECTS: Ahlstrom Non-Wovens BNFL Byworth Boilers Cindu Chemicals Crisp Maltings Europa Crown European Colours Harwell Innovia Films Kimberly-Clark MacFarlane Smith Muda Paper Mills Rohm & Haas Ronaldsway Aircraft Company Tullis Russell Coatings UKAEA Unilever Research & Development
DEPENDABLE PRODUCTS SINCE 1933 NO SUBSTITUTE FOR EXPERIENCE. In the 1950s, Turnbull & Scott started to manufacture heat exchangers based on extended surface, finned tube technology. The company is now recognised as one of the most reliable suppliers within the UK. Turnbull & Scott offers a comprehensive range of air/liquid custom built heat exchangers to meet the needs of the energy, process, waste, scientific and general manufacturing industries where a robust and economical solution is required. From site survey through design, manufacture, delivery and installation, Turnbull & Scott offer full turnkey solutions. Our current range of heat exchangers for the industrial market is illustrated in the following pages and includes: Process Dryers Heat Recovery Economisers Space Heaters Coolers & Condensers Blast Coolers
IT S THE NUMBER OF PERMUTATIONS AND COMBINATIONS THAT MAKES TURNBULL & SCOTT THE RIGHT CHOICE ALL TURNBULL & SCOTT INDUSTRIAL HEAT EXCHANGERS ARE CUSTOM DESIGNED AND BUILT. THE NUMBER OF VARIABLES MEANS THAT WE CAN PRODUCE A PRACTICAL SOLUTION TO MATCH YOUR HEAT LOAD AND AIRFLOW REQUIREMENTS. CONNECTIONS Available Flanged or Screwed TUBES Available in Copper, Mild Steel and Stainless Steel VARIABLES INCLUDE Materials: steel, stainless steel, copper or aluminium Dimensions: 150mm 6000mm Fin arrangement: helical fin or plate at varying pitch/height on tube from 15 100mm bore BENEFITS Number of rows: as required Surface treatment: hot dip galvanised, polyurethane coated or zinc plated On-demand technical advice and support Full installation service available Robust construction for long life Low maintenance Designed and built to your specifications and requirements TUBEPLATES/HEADERS Available in Mild Steel and Stainless Steel CASING Available in Galvanised Sheet, Stainless Steel Sheet and Heavy Duty Mild Steel (Painted) FINS Available in Aluminium, Mild Steel and Stainless Steel
PROCESS DRYING AMBIENT AIR PROCESS DRYING WARM, COST EFFICIENT, FAN DRIVEN AIR A CONSTANT, CONTROLLABLE INDUSTRIAL DRYING SOLUTION Process Dryers BOILER HEAT SOURCE Turnbull & Scott Process Dryers fundamentally consist of a fan and a heat exchange battery of whatever configuration you require. Applications range from curing cement slabs to drying grain and food processing. Generally, air is drawn from the outside and ducted over a heat exchange battery (steam, water or thermal fluid) to warm the air and increase operational efficiency. With Turnbull & Scott Process Dryers you are assured of a long life, low maintenance solution. IDEAL FOR Chemical Applications Textiles Processing Grain Drying Concrete Curing Paper Manufacture Tobacco Processing Food Processing
EXHAUST FLUE HEAT RECOVERY ECONOMISERS STRAIGHTFORWARD, EFFECTIVE ENERGY SAVING FROM EXHAUST GASES HOT EXHAUST GASES HEAT THE FINS AND PIPEWORK OF THE HEAT EXCHANGER ECONOMISER WHICH IN TURN HEATS THE WATER INSIDE THE PIPE. MAKING THE MOST OF WASTED HEAT COMBUSTION UNIT/HEAT SOURCE Heat Recovery Economisers EXHAUST GASES FROM THE COMBUSTION UNIT Turnbull & Scott Heat Recovery Economisers are specifically designed to work effectively within any largescale industrial flue. Custom built to meet your specification in stainless or mild steel finned tube, our Economisers are designed so that the flue function is unaffected. BENEFITS Uses waste heat to (recover) heat water for process, heating, power generation or pre-heat water to reduce boiler running costs and energy consumption Reduces running costs for all applications Minimal maintenance Built to your specification Full technical support Experienced installation available Couples to Electrotherm electricity generation IDEAL FOR Space Heating Process Heating Electricity Generation Pre-heating Boiler Water
AMBIENT AIR SPACE HEATERS ECONOMICAL, LOW MAINTENANCE, SENSIBLE SPACE HEATING Space Heaters BOILER HEAT SOURCE MOVING WARM AIR TO WHERE YOU WANT IT TO BE A straightforward heat exchanger and fan configuration offers a most effective, low maintenance heating solution for large volume spaces. This is even more the case with Turnbull & Scott products. Each solution is designed and built to meet your demands. Finned Tube is available in copper, aluminium or steel. The range of specification options is immense. BENEFITS Minimal maintenance Built to your specification Full technical support Experienced installation available Robust, long-life construction IDEAL FOR Factories Greenhouses Hospitals Museums Swimming Pools Public Areas Warehouses Workshops
COOLING CONDENSING HOT AIR SOLVENT LADEN AIR HIGH MOISTURE CONTENT AIR COOLERS & CONDENSERS IDEAL FOR RECOVERY OF SOLVENT FROM AIR, REDUCTION OF MOISTURE CONTENT OR COOLING AIR MOISTURE EXTRACTION Coolers & Condensers COST-SAVING INTELLIGENCE AT WORK Put simply, an air cooler is a heat exchanger with a fan. Cold water is piped through the heat exchanger and hot air is blown over the gilled tubing. The cold water in the finned tubing cools the air and allows solvent or moisture recovery as well as temperature reduction. IDEAL FOR Chemical Plants Refineries Gasification Plants Pharmaceuticals Space Cooling
BLAST COOLERS. A SOPHISTICATED YET SIMPLE CONCEPT RUN YOUR PROCESS AT OPTIMUM TEMPERATURE FOR IMPROVED EFFICIENCY INDUSTRIAL PROCESS Blast Coolers EXCESS HOT WATER LIQUID OR STEAM REDUCE COSTS AND IMPROVE EFFICIENCY Turnbull & Scott Blast Coolers, also known as air blown coolers, feature a robust extended surface heat exchanger combined with a power driven fan that blows cool air over the fins of the heat exchanger to dramatically reduce the temperature of excess output from a boiler or manufacturing process. May be used as a steam-condensing unit. Our robust, quality built coolers are designed to your specification and may be used to reduce hot water temperature or condense steam using air at ambient temperature. Industrial applications include engine or generator cooling, water jacket cooling or process water cooling. BENEFITS Designed to your specification Compact and easy to install Low maintenance Excess heat available for recycling Stops overheating Maintains optimum working temperatures Little on no visual impact Reduced water usage and cost Ideal for machinery running 24/7
RELIABLE TECHNICAL SUPPORT SUPPORT SERVICES In addition to the manufacture and distribution of industrial heat exchangers, Turnbull & Scott offer a range of installation and maintenance services to assure you of reliable performance for years to come. INSTALLATION JIM DAVIDSON General & Technical Support Manager JAMIE MCGEE Technical Support Our technical support service has been developed to meet the demands and expectations of specifier partners, architects, engineers, consultants and contractors. We understand that time is always of a premium and sound technical information is as essential as quality manufacture and attentive aftersales service. One of the core strengths at Turnbull & Scott is the knowledge base held within our technical design office. So important is this aspect of our business that General Manager, Jim Davidson has direct responsibility for this facility. He heads up the contact team for your technical information, design, estimating, project management and production enquiries. Jim is supported in our technical design department by Jamie McGee. Should you require any information or wish to view samples during the early stages of your project, please do not hesitate to call. Since the 1950s, Turnbull & Scott expert installation teams have undertaken projects throughout the UK and Europe. As you might expect, intimate knowledge of our product range inevitably leads to efficient, cost effective, quality installation of your heat exchange solution. This service is available for all Turnbull & Scott systems. MAINTENANCE, REPAIR AND REPLACEMENT While our products are renowned for their reliability, from time to time repair or replacement is necessary. In some instances, we repair and replace units that have given reliable service for over 40 years. Rather than a full replacement programme, a lower cost refurbishment exercise may be undertaken to give further decades of dependable service. Our installation teams also provide service cover throughout the UK. Installation and maintenance enquiries T: 01450 372053 E: info@turnbull-scott.co.uk W: turnbull-scott.co.uk
T: 01450 372053 E: info@turnbull-scott.co.uk W: turnbull-scott.co.uk REGISTERED OFFICE & WORKS: 20 COMMERCIAL ROAD, HAWICK, SCOTLAND TD9 7AQ