Attention Please handle this product with care and inspect it regularly to ensure it is in good working order. If the product, power supply cord or plug shows any signs of damage: stop use, unplug and contact Kogan.com support.
Table of Contents Safety & Warnings... 1 Product Overview...2 Assembly...3 Usage...4 Product Maintenance...6 Disposal...6 Safety & Warnings Read all instructions before using this appliance. Do not leave vacuum cleaner when plugged in. Unplug from outlet when not in use. To reduce the risk of electric shock, do not use outdoors or on wet surfaces. Use only as described in this manual. Use only attachments recommended by the manufacturer. Cease usage and contact the manufacturer immediately if the vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, dropped into water or the cord or plug is damaged. Do not pull or carry by the power cord or allow the power cord to be to be damaged by objects, doors or heat. Do not handle plug or vacuum cleaner with wet hands. Do not allow any opening to be blocked or obstructed. Keep free of dust, lint, hair and anything that may reduce airflow. Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts. Turn all controls off before unplugging. Use extra care when cleaning on stairs. Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present Unplug before connecting the hose. Do not allow the appliance to pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. 1
Product Overview 1. Floor Nozzle 5. Suction Hose Connection 9. Cord Retraction 2. Telescopic Tube 6. Carrying Handle 10. Exhaust Filter Button 3. Air Slide 7. ON/OFF Button 11. Crevice Nozzle 4. Suction Hose 8. Dust Release Button 12. Furniture Nozzle 8 3 7 4 5 6 9 10 2 11 1 12 Floor Nozzle The floor nozzle has two settings. When cleaning hard surfaces (parquet flooring, flooring tiles, etc.), the nozzle brushes should be extended. When cleaning carpets and mats, the brushes should be retracted into the nozzle. Press the brush change button to switch between the two settings. Floor Nozzle For radiators, corners, skirtings, etc. Furniture Nozzle For furniture, curtains, drapes, etc. 2
Assembly Vacuum Cleaning 1. Attach the hose to the vacuum cleaner by inserting the rotating hose connection into the vacuum cleaner until you hear a click. To remove the hose, press the button at the side of the hose connection and pull it out. 2. Assembling the telescope tube and accessories 2.1: Fit the telescopic tube into the other end of the hose. 2.2: Adjust the length of the telescopic tube by pushing the locking mechanism down and pulling in the bottom section of the tube to a suitable length. When parking, shorten the tube as far as possible. 2.3: Fit the floor brush into the telescope tube. 3
Usage Vacuum Cleaning 1. Before using the device, first extend the power cable to the appropriate length and plug into the mains socket. The yellow mark is the maximum length that must not be exceeded. To switch on the device, press the foot pedal button. 2. To retract the power cable, press the button with one hand and guide the cable with the other hand to ensure that it does not whip, causing damage. Emptying Dust Container Ensure to empty the dust container when the MAX indicator is reached or a drop in suction power is observed. 1. Switch off the vacuum cleaner and disconnect the plug from the mains. 2. Release the dust container by pressing down the release button. 4
3. Lift the dust container forwards out of the cylinder vacuum cleaner. 4. When emptying the dust container, hold it low over a dustbin. 5. Press the open button. The base opens and the dust runs into the dustbin. 6. Carefully knock the remaining dust loose. 7. Close the base. 8. Replace the dust container and ensure it is securely attached. Cleaning the Motor Filter IMPORTANT: Never use the vacuum cleaner without a motor filter. 1. Turn off and unplug cleaner. 2. Remove the dust container. 3. Open the dust container cover and remove the filter. 4. Hold the protective motor filter over a dustbin. For a rough clean, gently knock over a dustbin. 5
5. Insert the dry protective motor filter back into its holder. 6. Replace the filter cover by aligning it from above and pressing until it audibly clicks into place. 7. Close the dust container base. 8. Replace the dust container and ensure it is securely attached. Cleaning the Exhaust Air Filter The exhaust air filter is the final step of filtration. It can be cleaned as follows: 1. Turn off and unplug cleaner. 2. Remove the dust container. 3. Open exhaust filter cover. 4. Rinse the HEPA filter under cold running water and allow dry. 5. Replace the exhaust air filter. 6. Close the exhaust filter cover. 7. Close the dust container base. 8. Replace the dust container and ensure it is securely attached. Product Maintenance Clean the vacuum cleaner by wiping it with a damp cloth. Do not use any form of strong, solvent or abrasive cleaning agent. Disposal Once the product has reached the end of its useful lifespan, it should be disposed of responsibly, in accordance with the regulations of your local authority. In most cases, you can take such products to your local recycling station. 6