Lipika Technologies Intelligent Computerized Induction Cooker INSTRUCTION MANUAL Model: LPI4C-001 READ AND SAVE THESE INSTRUCTION MANUAL, USE AND CARE FOR YOUR INDUCTION COOKERS PLEASE READ IT CAREFULLY BEFORE USE.
Thank you for purchasing our Induction cooker, please read this instruction manual carefully before using and keep it safe for your future reference. PRODUCT INTRODUCTION This PSOC induction cooker transfers the power into high frequency wave. Magnetic waves generated by loops will through bottom of steel pans making high efficient electrical basket. This way will reduce quantity of heat in translating and make high heating efficiency, as heating will be uniform at surface. Our induction cooker will be more safe & healthy for your family and more cleanliness to your kitchen. INDUCTION COOKER WORKING PRINCIPLE The induction cooker is mainly based on the principle of electromagnetic induction technology. Current generates variable magnetic field after running through the wire coil. Eddy current is generated at the bottom when the magnetic field induces the steel pot on the cooker plate. A large amount of thermal energy produced can heat the bottom quickly, thus heating up the food very fast, with thermal efficiency up to 93%. 1
SPECIFICATION Model No. LPI4C-001 Power Supply 220-240V 50Hz Power Range 2000W Temperature Adjustment 80 C -270C Timer / Preset Timer 23 hour 59 minutes OPERATION AND USAGE Operation Step 1. Place suitable cooking utensils in the centre of the top plate 2. Insert the plug into 230V 15 Special Jack, power pilot lam flashes, induction cooker enters standby state. 3. Press button to start the induction stove. 4. Press and buttons to select different range of heat levels. 5. To stop cooking, press button then power light will flash Plug out to shut off power supply. USAGE Cooking function button: 1. Press the switch, the power indicator and the heating indicators are on, and now the Induction Cook - Top is in the heating made. Display shows 800 on the screen, this is the default wattage level and there are 3 different levels, they are 800 Watt (default for minimum temperature) 1000 Watt (for medium temperature) 1200 Watt (for High temperature) You can select any levels by pressing or keys 2. Increase button ------------- After induction stove powered on press this will increase temperature to higher level. During timer setting press can increase cooking time. 2
3. Decrease button --------------- After induction stove powered on press this will decrease temperature to lower level. During timer setting press can decrease cooking time. Cooking time can be set from 1 23.59minutes. To cancel timer setting press button Notice Only use special electrical outlet, do not use together with other appliances to avoid overheating. 1. Please do not heat tinfoil paper directly or indirectly and do not put cloth, paper, cushion, etc on the board for heating. 2. While using induction cooker do not put metal stick or other things in aspiration and exhaust channel. 3. If crack on the cover of induction cooker, please cut the power first. 4. Do not use near water to avoid water flowing into the machine. 5. While using induction cooker, please do not put metal matters and magnetic force matters on it to prevent from damage. 6. This appliance is liable to get hot during use. Do not touch the surface Choosing right pans:- 1. Suitable pans are 304 and 403 steel pans, porcelain enamel cast iron, especially flat pan. 2. Unsuitable pans are heat tolerance glasses, potter, copper, aluminum. 3
USABLE and NON-USABLE COOKING UTENSILS Usable Pans Steel or cast iron, enameled iron, stainless steel, flat-bottom pans / pots with diameter from 12 to 26cm. Non Usable Pans Heat-resistant glass, ceramic container copper, aluminum pans/pots Rounded-bottom pans/pots with bottom measuring less than 12cm CAUTIONS 1. Do not plug with wet hands. 2. Do not plug into a socket where several other appliances are plugged in. 3. Do not Plug into a socket which Ampere load is less than 10A 4. Do not use if the plug cord is damaged or the power plug does not fit the socket safely. 5. Do not modify the parts or repair the unit by yourself. 6. Do not use the unit near flame or wet places. 7. Do not use where children can easily touch the unit, do not allow children to use the unit by themselves. 8. Do not place the unit on unstable surfaces. 9. Do not move the unit when the pot or the pan is on it. 10. Do not heat the pot empty or overheat the pot 11. Do not place metallic objects such as knives, forks, spoons, lids, cans, and aluminum foils on the top plate. 12. Use the unit with sufficient space around it. When unit working, it must be placed at least 10cm from the wall. Keep the front side and either right or left side of the unit clear. 13. Do not use the unit on carpet or tablecloth (vinyl) or any other lowheat-resistant article. 14. Do not place a sheet of paper /silver paper between the pot/pan and the unit. The paper may get burnt. 15. Do not break the surface. If the surface is cracked, switch off immediately and take it to the qualified service centre. 16. Do not block air intake or exhaust vent. 17. Do not touch the top plate right after removing the pot or the pan, as the top plate will still be very hot. 4
18. Do not place the unit near to the objects which are affected by magnet, such as: watches, radios, televisions, automatic-banking cards and cassette tapes. 19. The power cord must be replaced by qualified technicians. CLEANLINESS & MAINTENANCE 1. Please shut off the power and pull out the plug before cleaning 2. Clean the unit after it cools down completely. 3. To remove dirt, please select litmus less detergent. 4. After remove dirt, please use neat wet cloth to clean the unit. 5. Do not clean by water directly, water get inside may cause malfunction. 6. Make the ceramic plate and pan clean before cooking otherwise, dirt after charring is very difficult to clean and the plate may get discoloration. 7. You may clean air vent / air entry s dirt by vacuum cleaner to suck up or by cotton. If there is dirt with oil, add a little litmus less detergent with toothbrush to clean. 8. Do not use benzene, thinner, scrubbing brush or polishing power to clean the induction cooker. 5
TROUBLE SHOOTING Trouble Code Possible Reasons Solutions E1 Abnormal supply voltage: Voltage too high Check power supply, power on after power supply back to normal. E2 Abnormal supply voltage: Voltage too low Please Check power supply, power on after power supply back to normal. E3 Coil panel is not connected Please Contact the supplier or go to a well: Electro circuit qualified service centre malfunction E4 No pot/ pan on the plate: Non-usable Pans on the Put suitable cooking utensils on the plate. plate E5 IGBT Over heat protection * Please allow the induction cook top to cool down and then restart the operation. * Please remove paper / cloth of any kept beneath the cook top as this will block the air vents thereby producing more heat. * If the problem still persists, please bring it to the service centre. E6 Coil Over heat Please contact the supplier or go to a qualified service centre. Clean the vent after the unit cools down, then can restart. 6