SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COMPLIANCE CERTIFICATION SERVICES INC. 1 Kunshan Laboratory No. 10 Wei ye Road Innovation Park Eco & Tec. Development Zone Kunshan City, Jiangsu, People s Republic of China Jessica Chen Phone: 86 0512 57355888 258 Fax: 86 57370818 ELECTRICAL Valid to: June 30, 2019 Certificate Number: 2541.01 In recognition of the successful completion of the A2LA Accreditation Program, accreditation is granted to this laboratory at the location listed above, as well as the satellite laboratory location listed below, to perform the following Electromagnetic Compatibility and RF Testing: Test Technology: Electromagnetic Compatibility Emissions Radiated and Conducted 47 CFR FCC, Part 15, Subpart B (using ANSI 63.4:2009 and ANSI C63.4:2014); ICES-003; 47 CFR FCC, Part 18 (using MP-5:1986); ICES-001; VCCI-V3, VCCI-CISPR 32 (up to 6 GHz); VCCI 32-1; CNS 13438 (up to 6 GHz); CNS 13439; CNS 13803; CISPR 11; EN 55011; CISPR 13; EN 55013; CISPR 22; EN 55022; AS/NZS CISPR 22; CISPR 32; EN 55032; AS/NZS CISPR 32; EN 55014-1 (excluding clicks); CISPR 14-1 (excluding clicks); EN 55015; CISPR 15 Harmonic Current Emissions IEC 61000-3-2; EN 61000-3-2; AS/NZS 61000.3.2 Voltage Fluctuations and Flicker IEC 61000-3-3; EN 61000-3-3; AS/NZS 61000.3.3 Electrostatic Discharge (ESD) IEC 61000-4-2; EN 61000-4-2; AS/NZS IEC 61000.4.2 Radiated IEC 61000-4-3; EN 61000-4-3; AS/NZS IEC 61000.4.3 Electrical Fast Transients/Bursts (EFT/B) IEC 61000-4-4; EN 61000-4-4; AS/NZS IEC 61000.4.4 Surge IEC 61000-4-5; EN 61000-4-5; AS/NZS 61000.4.5 Conducted IEC 61000-4-6; EN 61000-4-6; AS/NZS IEC 61000.4.6 Power Frequency Magnetic Field Voltage Dips, Short Interruptions and Voltage Variations IEC 61000-4-8; EN 61000-4-8; AS/NZS 61000.4.8 IEC 61000-4-11; EN 61000-4-11; AS/NZS 61000.4.11 (A2LA Cert. No. 2541.01) Revised 09/14/2017 Page 1 of 4
Test Technology: Generic and Product Specific Standards EN 61000-6-1; EN 61000-6-2; EN 61000-6-3 (excluding discontinuous interference); EN 61000-6-4; IEC 61000-6-1; IEC 61000-6-2; IEC 61000-6-3 (excluding discontinuous interference); IEC 61000-6-4; AS/NZS 61000.6.1; AS/NZS 61000.6.2; AS/NZS 61000.6.3 (excluding discontinuous interference); AS/NZS 61000.6.4; EN 55024; CISPR 24; AS/NZS CISPR 24; EN 61547; IEC 61547; EN 60601-1-2; IEC 60601-1-2; EN 50130-4; EN 55014-2; CISPR 14-2; EN 62040-2; IEC 62040-2; EN 61204-3; IEC 61204-3; EN 50121-1; EN 50121-3-2; EN 50121-4; EN 50121-5; EN 50155 (clauses 5.4 and 5.5); EN 61326-1; IEC 61326-1; EN 50083-2; EN 300 386; EN 301 489-1 (excluding Section 9.6); EN 301 489-3; EN 301 489-7; EN 301 489-17; EN 301 489-19; EN 301 489-24; EN 301 489-25; EN 301 489-34 Telecommunications Radio (excluding HAC and Protocol Conformance testing) Unlicensed Radio FCC FCC Part 15, Subparts 15C, 15E (KDB 905462 D03 (v01r02)) (using ANSI C63.4:2009, ANSI C63.4:2014 and ANSI C63.10:2013) Licensed Radio FCC Radio IC FCC Parts 22E, 24E (using ANSI/TIA-603-D) RSS-132; RSS-133; RSS-210; RSS-247 (excluding DFS testing) European Union (EU) EN 300 220-1; EN 300 220-2; EN 300 328; EN 300 330-1; EN 300 330-2; EN 300 440-1; EN 300 440-2; EN 301 893 (excluding DFS testing); EN 301 511 (clauses 4.2.12 to 4.2.19, and 5.2.12 to 5.2.19); EN 301 908-1 (clauses 4.2.2, 4.2.3, 5.3.1, and 5.3.2); EN 301 908-2 (clauses 4.2.4, 4.2.10, 5.3.3, and 5.3.9) Australia/New Zealand AS/NZS 4268 SAR IEEE Std 1528:2013; EN 50360; EN 50566; EN 62479; EN 50383; EN 50385; EN 62311; IEC 62209-1; EN 62209-1; IEC 62209-2; EN 62209-2; CNS 14958-1; CNS 14959; RSS-102; ACMA Radio Communications (Electromagnetic Radiation Human Exposure) Standard 2014 1 This accreditation covers testing performed at the main laboratory listed above, and the satellite laboratory listed below: (A2LA Cert. No. 2541.01) Revised 09/14/2017 Page 2 of 4
Shanghai Laboratory No. 5205, Boyuan Road Anting Town, Jiading Dist. Shanghai, People s Republic of China 201804 Test Technology: Electromagnetic Compatibility Emissions Radiated (ALSE Method) and Conducted CISPR 25 (sections 6.2, 6.3, and 6.4); EN 55025 (sections 6.2, 6.3, and 6.4); E/ECE/324/Add. 9 R10 (sections 6.5 and 6.6); ISO 13766 (sections 5.6 and 5.7); EN 50498 (sections 7.1 and 7.2); EN 13309 (sections 4.5 and 4.6) Conducted and Transient ISO 7637-2; EN 13309 (section 4.9); ISO 13766 (section 5.10); E/ECE/324/Add. 9 R10 (section 6.9); EN 50498 (section 7.3) Conducted Transient Absorber Lined Shielded Enclosure (ALSE) RF (200 MHz to 6 GHz) Up to 200 V/m (Metallic Bench Only) Up to 600 V/m (Radar Pulse Only) ISO 7637-2 (section 4.4); SAE J1113-11; J1113-12 (excluding DCC method); EN 50498 (section 7.4); 13309 (section 4.9); ISO 13766 (section 5.10); E/ECE/324/Add. 9 R10 (section 6.8); ISO 7637-3 (excluding DCC method); ISO 16750-2 (excluding sections 4.10.3) ISO 11452-2; ISO 13766 (section 5.8); EN 13309 (section 4.7); E/ECE/324/Add. 9 R10 (section 6.7) TEM Cell RF ISO 11452-3; ISO 13766 (section 5.8); EN 13309 (section 4.7); E/ECE/324/Add. 9 R10 (section 6.7); Bulk current Injection RF Stripline RF (100 khz to 400 MHz) ISO 11452-4 (excluding TWC method); ISO 13766 (section 5.8); E/ECE/324/Add. 9 R10 (section 6.7); EN 13309 (section 4.7); SAE J1113-4 ISO 11452-5; ISO 13766 (section 5.8); EN 13309 (section 4.7); E/ECE/324/Add. 9 R10 (section 6.7, 150 mm Stripline) to Magnetic Field ISO 11452-8 Portable Transmitters (80 MHz to 6 GHz), (Max Power: 20W) ISO 11452-9 Electrostatic Discharge (ESD) ISO 10605 (excluding section 10); EN 13309 (section 4.8); ISO 13766 (section 5.9); SAE J113-13 (section 5.9) (A2LA Cert. No. 2541.01) Revised 09/14/2017 Page 3 of 4
Testing Activities Performed in Support of FCC Declaration of Conformity and Certification in Accordance with 47 Code of Federal Regulations and FCC KDB 974614, Appendix A, Table A.1: Rule Subpart/Technology Test Method Maximum Frequency Unintentional Radiators Part 15B ANSI C63.4:2014 40GHz Industrial, Scientific, and Medical Equipment Part 18 FCC MP-5 (February 1986) 40GHz Intentional Radiators Part 15C ANSI C63.10:2013 40GHz U-NIII without DFS Intentional Radiators Part 15E ANSI C63.10:2013 40GHz U-NIII with DFS Intentional Radiators Part 15E FCC KDB 905462 D02 (v01) 40GHz RF Exposure Devices Subject to SAR Requirements IEEE Std 1528:2013 6GHz (A2LA Cert. No. 2541.01) Revised 09/14/2017 Page 4 of 4
Accredited Laboratory A2LA has accredited COMPLIANCE CERTIFICATION SERVICES INC. Kunshan City, People s Republic of China for technical competence in the field of Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 16 th day of May 2017. President and CEO For the Accreditation Council Certificate Number 2541.01 Valid to June 30, 2019 For the tests to which this accreditation applies, please refer to the laboratory s Electrical Scope of Accreditation.