Compact. Efficient. TROX.
The art of handling air TROX is the leader in the development, manufacture and sale of components and systems for the ventilation and air conditioning of rooms. With 24 subsidiary companies in 24 countries, 14 production facilities, another 25 own sales offices, more than 50 importers and representatives, a total group turnover of 390 million, and 3,600 employees worldwide, TROX is a world market leader in the area of ventilation and air conditioning components. The innovative X-CUBE compact by TROX is a milestone in the market for air handling units and defines new, considerably higher standards for quality, performance, reliability, energy efficiency, and hygiene. The X-CUBE compact offers the entire TROX know-how in one compact and easy-to-operate unit. Compelling all down the line. "Ventilation and air conditioning systems from a single source and for every application situation: The X-CUBE compact is the final piece that completes our portfolio. Whether small or large projects, whether new or refurbished buildings, whether central or decentralised systems: TROX offers the all-encompassing solution. This expertise combined with premium service makes TROX your ideal partner for every job." (Lutz Reuter, Chairman of the Board of Management of TROX GmbH) 2
X-CUBE technology in a compact unit With the X-CUBE technology TROX has defined a new standard for ventilation and air conditioning systems. The type X-CUBE units offer unlimited configuration options and meet just about every requirement. They are characterised by the most advanced technology, high quality and sophisticated details. The new unit type is a logical step forward. TROX has combined all the advantages of the proven X-CUBE into a ready-to-operate, pre-configured system that offers the same outstanding quality as the existing X-CUBE, yet in the smallest unit possible. Two heat exchanger systems for volume flow rates of 600 to 6,000 m³/h (0.17-1.7 m³/sec) are ideally suited for small and midrange applications. 3
Perfection in the smallest of spaces Panels Integral cover profiles Compression latch facilitates inspection and cleaning Casing Integral acoustic and thermal insulation Elimination of thermal bridging thanks to separation between inner and outer skin as well as between supply and extract air Steel frame Powder-coated Completely covered by panels Panel construction Complete thermal insulation Low leakage due to seamless foam seal Minimal heat losses Heat transfer class T2 Surfaces Powder coated No protruding frame parts, hence easy to clean Base frame With holes for the insertion of transportation rods (see large picture) Removable lifting points at the top (wire slings) 4
5
Two systems meet all requirements Plug fan EC motor without impeller housing High efficiency Low sound power level Complies with the future IE4 efficiency class according to IEC 60034-30 Minipleat filter Eurovent-certified, energy class A Compact depth Low initial pressure differential High dust holding capacity Stainless steel clamping rails Heat recovery Rotary heat exchanger or counter flow plate heat exchanger X-CUBE compact with rotary heat exchanger in five sizes Maximum heat recovery and humidity transfer with a compact unit of minimum length Multileaf dampers EN 1751, class 2 Aerodynamically profiled blades X-CUBE compact with counter flow plate heat exchanger in four sizes Complete separation of supply air and extract air that is contaminated with odorous substances, solvents or other substances Control technology For Modbus and BACnet Removable tray Enables control input signal for external accessories Control panel Easy change of the operating side by simply exchanging the panels 6
Quick sizing tables or the TROX EPF Easy Product Finder design programme help you find the right unit Top performance, small size Volume flow rates of 600 to 6,000 m³/h (0.17-1.7 m³/sec) Maximum energy efficiency at high total pressure increase High level of hygiene (conforms to VDI 6022) Heat recovery with rotary heat exchanger or counter flow plate heat exchanger Air filtration with TROX minipleat or NanoWave filters Weatherproof construction variant Ready to operate unit (plug and play) Operating side can be changed at a later stage Integral, bus compatible control technology Casing tested to EN 1886 by TÜV Süd, Germany Leakage class L1 Mechanical strength class D2 Filter class up to F9 Thermal transmittance class T2 Thermal bridging class TB2 R 5250 R 4200 P 3600 R 3000 P 3000 R 2000 P 1800 R 1300 P 1230 V1 (<1.6 m/s) V2 (1.6-1.8 m/s) V3 (1.8-2.0 m/s) V4 (2.0-2.2 m/s) approx. 500.0 2125.0 3750.0 5375.0 7000.0 0.14 0.59 1.04 1.49 1.94 Volume flow rate [m 3 /h] / [m 3 /sec] 7 X-CUBE compact: Volume flow rates and sizes to EN 13053
Advantages at a glance High energy efficiency Energy efficiency was the guiding concept in the development of the X-CUBE compact. Construction, insulation, low leakage, heat recovery, energy-efficient motors, and intelligent control technology have resulted in a considerable savings potential when compared to conventional air handling units. Unparalleled hygiene With the special shape of the casing, its smooth surfaces, and the way in which the components are installed, the X-CUBE compact complies with the VDI 6022 guideline. Easy installation The X-CUBE compact is delivered ready to operate. Transport is easy as the unit can be disassembled and shipped in three parts. Holes are provided for the insertion of transportation rods such that each part can be lifted with a crane. The operating side can be changed from left to right side or vice versa in no time. Safe maintenance The X-CUBE compact has been designed without any sharp edges and hence ensures maximum safety. All components are easily accessible and easy to maintain. Intuitive operation To meet different application requirements the X-CUBE compact can be easily adjusted using the control panel on the unit or a web browser. Virtually all status information is available at a glance. The excellent reliability ensures easy handling and safe operation. Seamless integration into modern building management systems The X-CUBE compact can be integrated with modern BMS via Modbus or BACnet. Adding other interfaces is possible. Made in Germany Thanks to its most advanced manufacturing technology in Germany, TROX can supply excellent quality and meet the most demanding delivery times. Just for the X-CUBE TROX built a new, dedicated 15,000 m² production facility in Anholt, near the German-Dutch border. The new production facility has been equipped with the most advanced manufacturing technology. Almost needless to mention that TROX implements the relevant industry standards and has all its components and processes certified. 8
It's TROX The whole picture The TROX air handling units have benefitted from the company's decades of experience and attention to detail. All components ideally complement each other. TROX engineers look beyond the actual air handling unit; they take into account the whole ventilation and air conditioning system. Own test laboratories allow TROX to optimise the acoustic, energy-related or aerodynamic characteristics of all components. TROX is the only German manufacturer of air handling units whose know-how extends to filters, fire and smoke protection, sound attenuators, and to all other components and systems. International expertise For many years TROX has been producing air handling units in Spain, South Africa and South America for the local markets. That experience has been incorporated in the development of the X-CUBE units and now benefits customers throughout Europe. References TROX X-CUBE units have already been installed in many buildings in Germany, where they ensure an excellent climate. X-CUBE is installed in the most diverse areas of application: from the new 15,000 m² production facility in Anholt to hospitals and office buildings such as the KEUCO head office in Hemer, Germany. The airflow laboratory in the TROX head office, Neukirchen-Vluyn, Germany TROX Germany, Anholt production facility KEUCO head office, Hemer, Germany 9
TROX GmbH Heinrich-Trox-Platz D-47504 Neukirchen-Vluyn Phone +49 (0) 2845 2020 Fax +49 (0) 2845 202265 www.troxtechnik.com trox@trox.de www.trox-x-cube-compact.com TROX GmbH (3/2013) S/XCUBEcompact/EN/1