2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Units 41 & 43 The Listerhills Park of Science and Commerce Campus Road Bradford BD7 1HR Contact: Ms J Pinkess Tel: +44 (0)1274 303080 Fax: +44 (0)1274 303098 E-Mail: jo.pinkess@sgs.com Website: www.uk.sgs.co.uk Testing performed at the above address only DETAIL OF ACCREDITATION TOYS and TOY PACKAGING Mechanical and Physical Tests BS EN 71-1:2014 clauses detailed below General Requirements 4 Excluding 4.20.2.5 - Toys using headphones or earphones 4.20.2.12 Voice toys Toys intended for children under 36 months 5 Packaging 6 Warnings and instructions for use 7 Test Methods 8 Clause 8.17, Durability of mouth activated toys Indentifying toys and other articles intended for use by childeren under 3 years of age which present chocking, aspiration, or ingestion hazards because of small part 16 CFR 1501:2008 Assessment Manager: NA Page 1 of 7
TOYS and TOY PACKAGING (cont d) Toys with a maximum dimension no greater than 600 mm Flammability Behaviour of toy materials Duration of flaming, extent of burning Rate of spread of flame, flaming debris BS EN 71-2:2011+A1 :2014 for the clauses detailed below General 4.1 Beards, moustaches, wigs and masks, and flowing materials attached to hats, masks 4.2 Disguise costumes 4.3 Toys intended to be entered by a child 4.4 Filled soft toys 4.5 Chemical Tests Toys and Toy Materials Soluble Antimony Soluble Arsenic Soluble Barium Soluble Cadmium Soluble Chromium Soluble Lead Soluble Mercury Soluble Selenium Total Lead BS EN 71-3:1995, Amd 1 (withdrawn)by ICP (OES) Assessment Manager: NA Page 2 of 7
TOYS, TOYS MATERIALS Category I, II, III CHILD CARE ARTICLES Chemical Tests Aluminium Antimony Arsenic Barium Boron Cadmium Cobalt Copper Lead Manganese Mercury Nickel Selenium Strontium Tin Zinc Organic Tin (Screening test only) Chromium VI (Screening test only) Extractable Chromium Chemical, Dimensional, Physical and Safety Testing EN 71-3:2013 +A1:2014 Baby Walking Frames Safety tests BS EN 1273:2005 Clause 4.2 Flammability Childrens Cots and Folding Cots Safety tests BS EN 716-1: 2017 Clause 4.2.2 Flammability of textiles, coated textiles and plastic coverings BS EN 716-2:2017 Cradles, Cribs Safety tests BS EN 1130:Part 1:1997 BS EN 1130:Part 2:1996 Carry Cots Safety tests BS EN 1466:2014 Assessment Manager: NA Page 3 of 7
CHILD CARE ARTICLES (cont d) High Chairs and Multi-purpose High Chairs Chemical, Dimensional, Physical and Safety Testing (cont d) Safety tests BS EN 14988-1:2006+A1:2012 (withdrawn) BS EN 14988-2:2006+A1:2012 (withdrawn) BS EN 14988:2017 Wheeled Child Conveyances Safety tests BS EN 1888:2012 Clause 7 Thermal Hazards Clause 8.8.2.6 Abrasion Conditioning Children's beds for domestic use Safety tests BS 8509:2008 +A1:2011 Clause 5.2 Total content and migration of formaldehyde Clause 6.0 Thermal Hazards Baby Changing Units Safety tests BS EN 12221-1:2008+A1:2013 BS EN 12221-2:2008+A1:2013 Playpens Safety tests BSEN 12227:2010 Clause 7 Thermal Hazards Reclined Cradles Safety tests BS EN 12790:2009 Children's safety harnesses, reins and similar type articles Safety tests BS EN 13210:2004 Excluding Clause 4.2, Total Content and Migration of Nickel Baby Bouncers All Tests BS EN 14036:2003 Chair Mounted Seats Safety tests BS EN 16120:2012 +A2 :2016 (Excluding flammability test) Assessment Manager: NA Page 4 of 7
MATERIALS and ARTICLES in CONTACT with FOODSTUFFS Vacuum ware, insulated flasks and jugs Insulated bags and boxes Thermals packs CERAMIC WARE, GLASSWARE, VITREOUS ENAMEL Chemical Tests At temperatures between 20 C and 70 C Overall migration into substitute food simulants Overall migration into aqueous food simulants by total immersion Overall migration into aqueous food simulants by article filling Substitute tests for overall migration from plastics intended to come into contact with fatty foodstuffs using test media isooctane and 95% ethanol Leaching tests, mechanical and physical tests Leaching tests, mechanical and physical tests Leaching tests, mechanical and physical tests Lead and Cadmium release from materials To meet requirements of Commission Regulation 10/2011 BS EN 1186-1:2002 BS EN 1186-3:2002 BS EN 1186-9:2002 BS EN 1186-14:2002 BS EN 12546-1:2000 BS EN 12546-2:2000 BS EN 12546-3:2000 BS 6748:1986 PLASTICS, RESINS and COMPOSITES Chemical Testing Total Cadmium IHM ANA004 based on BS EN 1122 but using microwave and ICP (OES) Entry 23 of regulation (EC) No 552/2009 amending annex XVII of REACH Regulation (EC) No. 1907/2006 Leather ph BS EN ISO 4045: 2008 Assessment Manager: NA Page 5 of 7
WRITING AND MARKING INSTRUMENTS Physical Safety Tests BS 7272-1:2008, Amd 1 BS 7272-2:2008+A1:2014 PROTECTIVE CLOTHING Abrasion EN 14325:2004 Clause 4.4 Flex Cracking Resistance EN 14325:2004 Clause 4.5 EN ISO 7854:1997 Puncture resistance EN 14325:2004 Clause 4.10 EN 863:1995 Trapezoidal Tear EN 14325:2004 Clause 4.7 EN ISO 9073-4:1997 Seam Strength EN 14325:2004 Clause 5.5 EN ISO 13925-2:2014 PROTECTIVE GLOVES Sizing EN 420:2003 +A1:2009 Clause 5.1 Dexterity Physical Properties Physical Properties Air & Water Leakage Cut Resistance EN 420: 2003 +A1:2009 Clause 5.2 EN 388:2003 EN 388:2016 EN 374-2:2014 EN 13997 :1999 ASTM F2992-15 TEXTILES Colour Fastness to Rubbing BS EN ISO 105: X12: 2016 Colour Fastness to Water BS EN ISO 105 E01:2013 Colour Fastness to Perspiration BS EN ISO 105 E04:2013 Breaking strength and elongation (Part 1 - strip method) BS EN ISO 13934-1: 2013 ph BS EN ISO 3071: 2006 Assessment Manager: NA Page 6 of 7
LIGHTERS Lighters - Safety specification BS EN ISO 9994:2006+A1:2008 Utility Lighters General consumersafety requirements BS ISO 22702:2003+A1:2008 Lighters- Child Safety requirements for lighters Safety requirements and test methods Standard Consumer Safety Specification For Lighters BS EN 13869:2016 ASTM F400-10 Lighters Regulations Canadian SOR 2016:187 (Excluding child panel test) Portable, Disposable and Refillable Lighters Safety Specifications NOM-090-SCFI-2014 (Excluding child panel test) Lighters Safety Specification Chile Protocol for Analyses and/or Tests for Fuel Product Lighters Safety Specification Lighters Safety Conditions NTE INEN-ISO 9994 First Addition 2014-01 (ISO 9994:2005.IDT) Chile Protocol for Analyses and/or Tests for Fuel Product No.89/1:2016 Argentine Standard IRAM 3980:Third Addition 14-12-2007 Utility Lighters General Consumer Safety requirements ASTM F2201-10 (Excluding child panel test) Where the BS EN standards have exact equivalents in EN Standards, those EN standards are also included in the accreditation. END Assessment Manager: NA Page 7 of 7