Automotive and Bodyshop Equipment

Automotive and Bodyshop Equipment Tel: +44 (0) 1252 785010 Email: info@redashe.co.uk www.redashe.co.uk

Boxer Double RDB22A Gun Cleaner for Water Based Paints The Autobox provides a compact automatic cleaning area that is supplied by pump fed recirculating Water or Aquawash a second pump is used for the automatic clean rinse. Use the Auto box to quickly and efficiently clean waterborne guns automatically.the machine is equipped with a manual cleaning area that is equipped with a paint channel flush gun for the internals and a flow through brush to clean the externals;, after cleaning our well-tested water recovery system allows the water or Aquasolve to be recycled using a flocculating powder and filters so that it can be reused and disposed of at lower cost. Lifetime PUMP WARRANTY n Automatic washing station, using recirculating waterborne solvent (like Drester AquaSolve) n Sink for manual cleaning, equipped with a paint channel rinse gun using clean water and a flow-through brush using recycled water. n The Double A can be ordered with stainless cabinet (DI22A) n Ex II 2 G EEx c IIA T6 Air supply: 7 12 bar (110-180 psi), 250 l/min (9 cfm) Extraction capacity: 140 m3/hour (82 cfm) (with a 15 m extension) 180 m3/hour (106 cfm) (with a 5 m extension) Overall dimensions: Height: 1510 mm (59,5 ), Width: 835 mm (33 ) Max depth: 650 mm (25,5 ), Depth at the floor: 610 (24 ) Extractor Diameter: 125mm (5 ) Weight: 65 kg (140 lb) Boxer Double RDB22S Gun Cleaner for Solvent Based Paints The Boxer double solvent is designed to clean solvent sprayguns automatically and manually. The Boxer incorporates the all-new Autobox which provides a compact automatic cleaning area supplied by pump fed recirculating solvent a second pump is used for the automatic clean rinse. The compact size of the Autobox means that manual cleaning of solvent sprayguns can also take place in the manual workstation at the same time, as solvent guns are being cleaned automatically. The unit is equipped with a flow through brush to clean the externals of the spray gun and a paint channel flush gun for the internal surfaces the unit is also supplied with a blowgun to dry off the sprayguns after cleaning and a sprayout facility. As with all Redashe spraygun cleaners they are foot operated this keeps hands free while handling expensive sprayguns. n Automatic washing station, using re-circulating solvent with an automatic clean rinse n Sink for manual cleaning, equipped with a flow-through brush using re-circulating solvent and a spray handle using clean solvent n The Double S can be ordered without automatic clean rinse (DB21S) n Double S can be ordered with a stainless cabinet (DI22S or DI21S) n Ex II 2 G EEx c IIA T6 Air supply: 7 12 bar (110-180 psi), 250 l/min (9 cfm) Extraction capacity : 140 m3/hour (82 cfm) (with a 15 m extension) 180 m3/hour (106 cfm) (with a 5 m extension) Overall dimensions: Height: 1510 mm (59,5 ), Width: 835 mm (33 ) Max depth: 650 mm (25,5 ), Depth at the floor: 610 (24 ) Extractor Diameter: 125mm (5 ) Weight: 65 kg (140 lb) Lifetime PUMP WARRANTY Boxer Double (Solvent) RDB21S This machine comes with all the same basic features of the RDB22S but does not have the a second pump Clean rinse is provide in the manual bowl in front of the Autobox all other details are the same. 2 Automotive

Boxer Double Combo RDB22C Gun Cleaner for Water and Solvent Based Paints The Boxer double combo is designed to clean solvent and aqua sprayguns. The Boxer incorporates the all-new Autobox, which provides a compact automatic cleaning area, which is supplied by pump fed recirculating solvent and a manual clean rinse spray. The compact size of the Autobox means that manual cleaning of waterborne sprayguns can also take place in the manual workstation at the same time, as solvent guns are being cleaned. The unit is equipped with a flow through brush to clean the externals of the spray gun and a paint channel flush gun for the internal surfaces. The unit is also supplied with a blowgun to dry off the sprayguns after cleaning and a sprayout facility. The waterside of the machine is equipped with our well-tested water recovery system that allows the water or aquasolve to be recycled using a flocculating powder and filters so that it can be reused and disposed of at lower cost. As with all our spraygun cleaners they are foot operated this keeps hands free while handling expensive sprayguns. n Automatic washing station, using re-circulating solvent and manual clean rinse n Sink for manual cleaning of waterborne paints is equipped with and a flow-through brush and clean rinse nozzle n Using recycled water and a paint channel rinse gun using clean water n The Double C comes equipped with a pneumatic extractor n Ex II 2 G EEx c IIA T6 n The Double C can be ordered with stainless cabinet (DI22C) Air supply: 7 12 bar (110-180 psi), 250 l/min (9 cfm) Extraction capacity: 140 m3/hour (82 cfm) (with a 15 m extension) 180 m3/hour (106 cfm) (with a 5 m extension) Overall dimensions: Height: 1510 mm (59,5 ), Width: 835 mm (33 ) Max depth: 650 mm (25,5 ), Depth at the fl oor: 610 (24 ) Extractor Diameter: 80 mm (7 3/16 ) Weight: 65 kg (140 lb) Lifetime PUMP WARRANTY Boxer Quattro RDB44S Gun Cleaner for Solvent Based Paints This machine has all the same features as the Boxer Double solvent machine, X two allowing 4 spray guns to be cleaned at the same time 2 spray guns in the Autobox and 2 manually making this the prefect machine for all large paint shops. n Automatic washing station, using re-circulating solvent and clean rinse n Sink for manual cleaning, equipped with a flow-through brush and clean rinse nozzle n The Quattro S can be ordered without automatic clean rinse (DB42S) n The Quattro S can be ordered with stainless cabinet (DI44S or Dl42S) n Ex II 2 G EEx c IIA T6 Air supply: 7-12 bar (110-180 psi), 150 l/min (6 cfm) (450 l/min (16 cfm) with DRESTER AIRVENT 11660) Extraction capacity: 800 m3/h (500 cfm) Overall dimensions: Height: 1510 mm (59,5 ) Width: 1185 mm (46,7 ) Max depth: 650 mm (25,5 ) Depth at the fl oor: 610 (24 ) Extractor Diameter: 125 mm (5 ) Weight: 105 kg (230 lb) Lifetime PUMP WARRANTY Automotive 3

Boxer Triple Combo RDB33C Gun Cleaner for Water and Solvent Based Paints The Boxer Triple Combo is designed to clean Solvent and Aqua sprayguns. The Boxer incorporates the all-new Autobox provides a compact automatic cleaning area which is supplied by pump fed clean & recirculating solvent. The Autobox also incorporates a new method of installing the spraygun; the new-patented magnetic gun holder allows the spraygun to be positioned quickly and easily in the machine, eliminating the need for multiple extension tubes. The compact size of the Autobox means that manual cleaning of solvent sprayguns, Suction & pressure pots can also take place in the manual workstation situated in front of the Autobox, at the same time, as a spraygun is being cleaned. The unit is equipped with a flow through brush to clean the externals of the spray gun and a paint channel flush gun for the internal surfaces the unit, it is also supplied with a blowgun to dry off the sprayguns after cleaning, and a sprayout facility. The Waterside of the machine is equipped with a paint channel flush gun for the internals and a flow through brush to clean the externals; after cleaning our well-tested water recovery system allows the water or Aquasolve to be recycled using a flocculating powder and filters so that it can be reused and disposed of at lower cost. n Automatic washing station, using re-circulating and Clean solvent and manual clean & re-circulating rinse n Sink for manual cleaning,equipped with and a flow-through brush and clean rinse nozzle (hand held) n Using recycled water and a paint channel rinse gun using clean water n The Triple C comes equipped with a pneumatic extractor n The Triple C can be ordered with stainless cabinet (DI33C) n Ex II 2 G EEx c IIA T6 Lifetime PUMP WARRANTY Air Supply: 7 12 bar (110-180 psi), 250 l/min (9 cfm) Extraction capacity : 140 m3/hour (82 cfm) (with a 15 m extension) 180 m3/hour (106 cfm) (with a 5 m extension) Overall dimensions: Height: 1510 mm (59,5 ), Width: 835 mm (33 ) Max depth: 650 mm (25,5 ), Depth at the floor: 610 (24 ) Extractor Diameter: 125 mm (5 ) Weight: 95 kg (140 lb) Boxer Gun Cleaner RDB44C Gun Cleaner for Solvent Based Paints This machine has all the same features as the Boxer Double Combo machine, times two allowing 4 spray guns to be cleaned at the same time, 2 solvent spray guns in the Autobox and 2 waterborne guns manually making this the prefect machine for all large paint shops. The Boxer Quattro incorporates two of the all-new Autobox which has been designed to allow quick efficient cleaning of all types of gravity spraygun, the Autobox provides a compact automatic cleaning area which is supplied by pump fed recirculating solvent and a manual clean rinse spray. The waterside of the machine is equipped with a paint channel flush gun for the internals and a flow through brush to clean the externals; after cleaning our welltested water recovery system allows the water or Aquasolve to be recycled using a flocculating powder and filters so that it can be reused and disposed of at lower cost. n Auto washing station, using re-circulating solvent and automatic clean rinse n Manual sink, equipped with a flow-through brush using re-circulating solvent and a spray handle using clean solvent n Automatic washing station using re-circulating water-borne solvent (like Drester AquaSolve) n Sink for manual cleaning, equipped with a paint channel rinse gun using clean water and a flow-through brush using recycled water n The Quattro C can be ordered with stainless cabinet (DI44C) n Ex II 2 G EEx c IIA T6 Air supply: 7-12 bar (110-180 psi), 150 l/min (6 cfm) (450 l/min (16 cfm) with DRESTER AIRVENT 11660) Extraction capacity: 800 m3/h (500 cfm) Overall dimensions: Height: 1510 mm (59,5 ), Width: 1185 mm (46,7 ) Max depth: 650 mm (25,5 ), Depth at the floor: 610 (24 ) Extractor Diameter: 125 mm (5 ) Weight: 105 kg (230 lb) Lifetime PUMP WARRANTY 4 Automotive

RQR-10/20/TT QuickRinse RINSE UNIT The Redashe QuickRinse has been developed to enable body shops to use disposable cups to their full potential. The QuickRinse is a pneumatic rinsing device, which can be used inside the spray booth; it dramatically increases the benefits of using disposable cups. It quickly cleans the paint channels between colour changes. Disposable cup systems allow the painter to take several colours into the spray booth at the same time enabling them to spray different panels one after the other without leaving the spray booth. This creates a much more effective and efficient way of working saving hours of time. Cleaning the spraygun thoroughly between colour changes, is essential, if they are to avoid colour mismatch and paint defects. Simply pouring water into the gun s paint channel and then spraying out the paint and water usually does not clean the paint channel properly. Leaving the spray booth to clean the spray gun is time consuming and inconvenient. n You don t have to leave the booth - save time no need to disconnect air mask or gun, less risk of dust entering the booth. n Complete Clean - High-pressure cleaning allows safe colour change inside the booth, instant cleaning gives better cleaning results, cleans in 30 seconds. n Improves cleanliness - no messy cleaning with inadequate water bottles. n Store cups on the QuickRinse shelf, waste handled by any aqueous cleaner. n Compatible with all disposable cup systems. n Perfect for Smart Repair vans Air supply: 5-12 bar Air consumption: 100 l/min Weight: 12.5 kg Wash mode: Water, Solvent or Both Dimensions: WxHxD 535x645x263 mm RQR-10 AQUA RQR-20 SOLVENT RQR-TT BOTH Automotive 5

R950 Aqua Cleaner Gun Cleaner for Water based Paints The R950 Aqua Cleaner is a very competitively priced, high performance gun cleaner, designed for use with all waterborne paint systems. Constructed from galvanized steel and heavy-duty polypropylene plastic. The R950 has an integral flocculation system for ease of waste disposal, and a unique Teflon membrane pump, which produces the high volume low-pressure wash, no external water supply, is required, the pump has a lifetime warranty. n Manual Clean Rinse n Automatic Flocculation* n Cleaning Brush and Jet Nozzle n Filtration n Lifetime Pump Warranty n ATEX Certified n Easy to clean (no corners for paint to collect) n Hand Control (On / Off) n Reusable Filters n No External water supply required n Solid Construction * Now available from Redashe - Flocculating Powder (Coagulant) Part No. R9211 Lifetime PUMP WARRANTY Working pressure: Air consumption: Water capacity: Dimensions: 80-110 psi (5-12 bar) 3.5 c.f.m. up to 35 litres in total Height 1030mm Diameter 625mm R1000 Aqua Cleaner Gun Cleaner for Water based Paints The R1000 Aqua Cleaner is a high performance gun cleaner, designed for use with waterborne paint systems. Constructed from stainless steel and heavy duty plastic, is available now, ready to meet the challenge of today s paint shop. The R1000 has an integral flocculation system for ease of waste disposal. The high volume wash is produced by a unique Teflon membrane pump. Lifetime PUMP WARRANTY n Manual n Clean Rinse n Automatic Flocculation* n Cleaning Brush and Jet Nozzle n Filtration n Pumped evacuation of water to drain * Now available from Redashe - Flocculating Powder (Coagulant) Part No. R9211 1000 Nexa Autocolour: As above but including an air operated paddle agitator and a trolley for the water storage tank. Working pressure: 80-110 psi (5-7 bar) Air consumption: 3.5 c.f.m. Water capacity: 35 litres in total Dimensions: Height 1030mm Diameter 625mm Water flow through pistol & gun: 1.5-2 litres/minute Weight: 24 kg * No specialist waste to take away, cutting costs 6 Automotive

Gun Cleaner R2600 Gun Cleaner for Solvent based Paints The R2600 is a manual spray gun cleaner and is designed for use with conventional paints and thinners. The machine cleans with pump fed recirculating thinners through a wash brush and also a manual clean rinse nozzle. The gun cleaner is equipped with a unique Drester Teflon Diaphragm pump, which gives a superior wash result. The built-in automatic extraction prevents contact with hazardous fumes and improves the working environment. The R2600 is the ideal machine for cleaning spray guns, paint cans and spatulas, while also saving thinners and time. n Manual cleaning using recirculating solvent through brush n Manual clean rinse n Air gun for blow through and to dry off guns n Spray out facility n Automatic fume extraction Working pressure: Air consumption: Extraction capacity: 100-180 psi (7-12 bar) 250l/m (9 c.f.m.) 140m3/h (82 c.f.m.) with 15m (49ft) extraction duct 180m3/h (106 c.f.m.) with 5m (16ft) extraction duct Extractor Diameter: 125mm (5 ) Weight: 30kg (67lb) Dimensions: Height 880mm Diameter 645mm Lifetime PUMP WARRANTY Gun Cleaner R3600-SS Gun Cleaner for SOLVENT based Paints The R3600-SS Gun Cleaner is a semi automatic unit that works in two stages. The enclosed automatic wash runs for two minutes using recirculating solvent, washing guns internally and externally. The gun is then rinsed manually with clean solvent spray. A compact design for restricted space operation. n Semi automatic n Spray-out facility n Clean rinse n Fume extraction* n Fully enclosed n 1 or 2 Gun Versions n Stainless Steel Bowl Working pressure: 75-180 psi (5-12 bar) Air consumption: 9 c.f.m. Extraction capacity: 140m3/h (82 c.f.m.) with 15m (49ft) extraction duct 180m3/h (106 c.f.m.) with 5m (16ft) extraction duct Extractor Diameter: 125mm (5 ) Dimensions: Height 880mm Diameter 645mm Lifetime PUMP WARRANTY Life Time Warranty All Redashe spray gun cleaner pumps carry a lifetime guarantee against faulty materials and workmanship, this guarantee does not apply to fair wear and tear or damage caused by misuse or abuse of the product. Warranty limited to the original purchaser. This is for all spray gun cleaners pages 152-159 (excludes QuickRinse). * 0.5m 3 extraction per second away from the face is recommended by Redashe (HSG258). Automotive 7

Gun Cleaner R8000 Gun Cleaner for SOLVENT based Paints The R8000 is a fully automatic and fully enclosed spray gun cleaner. It is equipped with two powerful diaphragm pumps, which provide a very high volume low pressure wash, which not only cleans guns more efficiently, but also reduces fume emission to a minimum. The pumps, which are guaranteed for the life of the unit, are manufactured from high tech. polymers using Teflon membranes. Made from stainless steel with brass interior components, the R8000 is ideally suited for both conventional and water based paints. n Fully enclosed n Fully automatic n Clean rinse n Spray-out facility n Fume extraction* n Water or solvent n Manual wash facility n Lifetime pump warranty n 1 or 2 Gun Versions NATO STOCK NUMBER: 4930-01-105-9923 NATO APPROVED Working pressure: Air consumption: Dimensions: 110-180 psi (7-12 bar) 9 c.f.m. H 990mm W 700mm Lifetime PUMP WARRANTY * 0.5m 3 extraction per second away from the face is recommended by Redashe (HSG258). Recycler 120 SOLVENT RECYCLER The RDR120A Recycler is a tried and tested design which is Robust, safe and reliable the condenser is Stainless steel ensuring longevity for the unit, incorporating all the necessary features to allow it to be linked into the Dynamic Triple System which allows Automatic Solvent Transfer into the Recycler, creating one of the most user friendly systems in the paint process. The stainless steel boiler is on a pivot for ease of maintenance. Larger capacity recyclers available. For up to date information and prices please visit our web site - www.redashe.co.uk Type of solvents distillable: Thinner type, Solvent Boiler capacity: 12 litres Residues discharge: Plastic bag Condensation system: By air Condenser material: Stainless steel Time per cycle: 3-4 1/2 hours Voltage: 200-240 V 1ph 50 or 60 Hz Electrical construction: Explosion proof Weight: 67 kg 8 Automotive

Dynamic Triple Gun Cleaner & SOLVENT recovery System Lifetime PUMP WARRANTY The Dynamic Triple is made up of three elements, a solvent recycler, docking station and a solvent spray gun cleaner. The Dynamic Triple enables the transfer of used dirty solvent directly into the recycler while at the same time refilling the clean rinse solvent drum, ensuring the gun cleaner is not out of use for more than a couple of minutes. This removes the health and safety issues of inhalation of fumes, lifting of heavy cans full of dirty solvent and possible spillage on the floor or over the recycler. The transfer pumps are extremely efficient and will transfer the solvent up to 25m. This allows the recycler to be installed away from the Spray Gun Cleaner. With transfer of the solvent being so quick and simple it enables the process to be run on a frequent basis keeping the solvent in better condition which in turn cleans the spray guns more efficiently, saving time at every stage. The Redashe Dynamic Triple will assist companies with their commitment towards EPA and Health and Safety Legislation. n All machines in a closed loop n One valve operation to transfer the solvent n Lifetime warranty on all pumps n Up to 25 metre solvent transfer n Sealed Solvent Container n 4 minute transfer n Pumps on fixed frequency n All pipe work permanently connected n Access to clean solvent at all times n Stainless steel condenser on the recycler n Explosion proof construction n Time saving For up to date information and prices please visit our web site - www.redashe.co.uk RDR120A Type of solvents: Distillable Thinner type Boiler capacity: 12 litres Residues discharge: Plastic bag Condensation system: By air Condenser material: Stainless steel Time per cycle: 3-4 1 /2 hours Voltage: 200-240 V 1ph 50 or 60 Hz Electrical construction: Explosion proof Weight: 67 kg RDX9012 & 8012 Air Supply: 7-10 bar Air Consumption: 250 l/m Volume for fresh solvent: 12 litres Volume for recycled solvent: 12 + 40 litres Max diameter: 510 mm Weight: 21 kg Life Time Warranty All Redashe spray gun cleaner pumps carry a lifetime guarantee against faulty materials and workmanship, this guarantee does not apply to fair wear and tear or damage caused by misuse or abuse of the product. Warranty limited to the original purchaser. This is for all spray gun cleaners pages 152-159 (excludes QuickRinse). Automotive 9

Sagola Spray Guns PROFESSIONAL PAINTING SYSTEMS 3300 Pro n 65% - 72% minimum transfer efficiency n Ideal spraygun for high quality finishes n Spray gun precision engineered to eliminate o-rings n Single mechanic spindle, spray gun with low spare/ maintenance n 1 litre high resistance metallic cup available SAGOLA takes the lead again in mid-range and high-end spray guns. The new 3300 Pro is launched with the highest manufacturing standards, Sagola competitive prices and always maintaining a superb service and offering the maximum guarantee (3 years). A new body with improved ergonomics, the widest range of answers and application solutions and strict compliance with the most demanding standards of manufacture and emissions of solvents, set the new 3300 Pro model apart. The 3300 Pro is available with HVLP, EPA and the new EVO head caps. Air pressure in cap: Weight: Inlet working pressure: 0.7 bar 1.7kg Aqua Xtreme-R: 255 l/min max. 2 bar Part Number Needle & Nozzle Minimum Transfer Efficiency Description 3300 EPA (Standard Air Consumption 380 l/min) SA 10141501 1.4 65% High quality finishes Industrial enamels, wood varnishes, and fillers. Industrial SA 10141502 1.6 65% enamel, wood basecoats and fillers SA 10141503 1.8 65% 3300 HVLP (Standard Air Consumption 240 l/min) SA 10141504 1.4 72% High quality finishes Industrial enamels, wood varnishes, and fillers. Industrial SA 10141505 1.6 72% enamel, wood basecoats and fillers SA 10141506 1.8 72% 3300 EVO (Standard Air Consumption 320 l/min) SA10141514 1.3 65% Basecoats, Clearcoats, Metalised SA10141513 1.4 65% Clearcoats and Single Stage paints. Highest quality finishes SA10141515 1.6 65% High speed application, large surface areas 10 Automotive

Sagola Spray Guns PROFESSIONAL PAINTING SYSTEMS 4400G Xtreme 4400G Xtreme 4400G Xtreme - Gauge 4400G Xtreme - Ditigal Suitable spray gun for the application of the latest generation finishes in the body shop, varnishes, HS single stage colours and waterborne paint. Designed to obtain the greatest grade of gloss with the new HS and the greatest uniformity of colour with the most complex water base metallics. Xtreme System: 65% minimum product transfer, keeping a working pressure below 2 bar, ensuring the maximum product performance. n 65% minimum transfer efficiency n Ideal spraygun for high quality finishes n Weight: 4400G Xtreme Digital: 695 grs. 4400 G Xtreme. 690 grs. n Perfect ergonomics - easy to operate and smoother operation n Greater durability when used with new waterborne products Air pressure in cap: Air consumption: Inlet working pressure: 0.7 bar RXT 01: 255 l/min RXT02: 310 l/min Aqua Xtreme-R: 255 l/min max. 2 bar Part Number Needle & Nozzle Air Cap Description 4400G Xtreme - Digital (Standard Air Consumption 540 l/min) SA10141406 1.4 XT02 R Varnishes and single stage HS, high speed SA10141405 1.3 XT02 R Varnishes and single stage HS, <20" viscosity SA10141407 1.2 AQUA Double stage colour water based, high performance SA10141408 1.3 AQUA Double stage colour water based SA10141409 1.4 AQUA Double stage colour water based, high speed 4400G Xtreme - Gauge (Standard Air Consumption 540 l/min) SA10141418 1.4 XT02 R Varnishes and single stage HS, high speed SA10141417 1.3 XT02 R Varnishes and single stage HS, <20" viscosity SA10141419 1.2 AQUA Double stage colour water based, high performance SA10141420 1.3 AQUA Double stage colour water based SA10141421 1.4 AQUA Double stage colour water based, high speed 4400G Xtreme (Standard Air Consumption 540 l/min) SA10141430 1.4 XT02 R Varnishes and single stage HS, high speed SA10141429 1.3 XT02 R Varnishes and single stage HS, <20" viscosity SA10141431 1.2 AQUA Double stage colour water based, high performance SA10141432 1.3 AQUA Double stage colour water based SA10141433 1.4 AQUA Double stage colour water based, high speed Automotive 11

Sagola Spray Guns PROFESSIONAL PAINTING SYSTEMS The 4500-Advanced Design Technology for the Bodyshop Using the best engineering & design technology Sagola have produced the 4500 to be light, robust and ergonomically balanced in the hand, to do this Sagola have used a combination of forged aluminium and stainless steel, making the 4500 extremely reliable, due to the way the gun has been designed this gun does not need any O rings or gaskets between the air and paint, making the cleaning of the gun fast and efficient. Four different Aircaps are available making the 4500 the perfect choice for all Professional Bodyshop paint applications, giving high performance combined with low air consumption. Many of the 4500 s features are patented from the handle design and finish to the airflow through the aircap the 4500 represents Extreme Engineering at its best. n 65% minimum transfer efficiency (75% with LXT HVLP) n Ideal spraygun for high quality finishes n Weight with deposit: 690 grs. n Deposit size: 650 cc n Deposit with removable anti-dripping system 4500- Digital 4500 - External Regulator 4500 - Internal Regulator Air consumption: Inlet working pressure: LXT 01: 255 l/min LXT CLEAR: 330 l/min LXT HVLP: 400 l/min LXT Aqua: 280 l/min max. 2 bar Part Number Needle & Nozzle Air Cap Description 4500 - Digital SA10141811 1.3 LXT 01 Multiproduct, clearcoats, single stage paints, basecoats SA10141817 1.4 LXT 01 Clearcoats, single stage paints, industrial bodyshop SA10141813 1.3 LXT CLEAR Clearcoats HS, <18" SA10141815 1.3 LXT CLEAR Special HS clearcoats SA10141819 1.4 LXT CLEAR Clearcoats and HS single stage paints, high speed, viscosity > 20" SA10141832 1.2 LXT AQUA Waterborne paints, high precision SA10141818 1.4 LXT AQUA Waterborne paints, high speed SA10141814 1.3 LXT HVLP Water and solvent based basecoats SA10141820 1.4 LXT HVLP Water and solvent based basecoats, clearcoats, single stage 4500 - External Hand Tightened Regulator SA10141821 1.3 LXT 01 Multiproduct, clearcoats, single stage paints, basecoats SA10141827 1.4 LXT 01 Clearcoats, single stage paints, industrial bodyshop SA10141823 1.3 LXT CLEAR Clearcoats HS, <18" SA10141825 1.3 LXT CLEAR Special HS clearcoats SA10141829 1.4 LXT CLEAR Clearcoats and HS single stage paints, high speed, viscosity > 20" SA10141833 1.2 LXT AQUA Waterborne paints, high precision SA10141828 1.4 LXT AQUA Waterborne paints, high speed SA10141824 1.3 LXT HVLP Water and solvent based basecoats SA10141830 1.4 LXT HVLP Water and solvent based basecoats, clearcoats, single stage 4500 - Internal Regulator SA10141801 1.3 LXT 01 Multiproduct, clearcoats, single stage paints, basecoats SA10141807 1.4 LXT 01 Clearcoats, single stage paints, industrial bodyshop SA10141803 1.3 LXT CLEAR Clearcoats HS, <18" SA10141805 1.3 LXT CLEAR Special HS clearcoats SA10141809 1.4 LXT CLEAR Clearcoats and HS single stage paints, high speed, viscosity > 20" SA10141831 1.2 LXT AQUA Waterborne paints, high precision SA10141802 1.4 LXT AQUA Waterborne paints, high speed SA10141808 1.3 LXT HVLP Water and solvent based basecoats SA10141810 1.4 LXT HVLP Water and solvent based basecoats, clearcoats, single stage 12 Automotive

Sagola Spray Guns PROFESSIONAL PAINTING SYSTEMS 424G HVLP 4100 4100 G For up to date information and prices please visit our web site - www.redashe.co.uk 4100 B Save time and effort preparing for the perfect finish, by laying down the perfect base coat using the 424 G HVLP standard 1.8 nozzle. The 424 G HVLP is supplied with Gravity Cup and paint filter as standard. n HVLP system, 72% minimum transfer efficiency n Ergonomic and light design n Precision engineered to eliminate the use of o-rings n Single mechanic spindle, low spares/maintenance n Low inlet pressure (2 bar) 29psi n High product savings n High application speed n Low mist Air pressure in cap: Inlet working pressure: Part Number Needle & Nozzle 0.68 bar 2 bar Air Cap Description Gravity 424G HVLP (Standard Air Consumption 390 l/min) SA10111701 1.4 04 Quality finishes SA10111702 1.6 04 Enamels, varnish, refinish fillers SA10111703 1.8 04 Fillers HS, wood basecoats, primers The 4100 G Conventional Spray Gun has been specifically designed by Sagola to give outstanding finishes when used with conventional paints. n Medium pressure spray gun. Material savings with low air consumption compared to other conventional systems n Ideal spray gun for finishes with high application speed n Spray gun with ergonomic design n Automatic packing nut n Single mechanic spindle, low spare/maintenance Inlet working pressure: Part Number Needle & Nozzle max. 3.5 bar Air Cap Description Gravity 4100G (Standard Air Consumption 350 l/min) SA10140401 1.4 96 Very high quality finishes - general painting SA10140402 1.6 96 Very high application speed SA10140403 1.8 96 Large surfaces Suction 4100 (Standard Air Consumption 350 l/min) SA10120402 1.6 96 Very high quality finishes - general painting SA10120403 1.8 96 High application speed - large surfaces SA10120401 104 96 Very high quality finishes Pressure 4100 (Standard Air Consumption 350 l/min) SA10150802 1.2 765 Finishes, primers, fillers SA10150801 1.0 765 Fluid products Automotive 13

Sagola Spray Guns PROFESSIONAL PAINTING SYSTEMS MiniXtreme Sagola have produced the Mini Xtreme to be light, robust and ergonomically balanced in the hand, due to the way the gun has been designed this gun does not need any O rings or gaskets between the air and paint, making the cleaning of the gun fast and efficient, perfect for the SMART repairer. Fan patterns designed to obtain the best drying times and finish, and all at low pressures of 0.8-1.0 bar. Tempered stainless steel nozzles and needles Specific Mini AQUA aircap Designed for work on Spot repair with waterborne paints. Maximum atomisation with pressures between 0.8 and 1 bar, the exclusive air diffusion system in the aircap means smooth atomisation, reducing mist, saving paint and defining the work area perfectly. Tested and developed with waterborne products. n High precision aluminium product and fan regulators designed for easy handling even when wearing gloves. n Numbered product regulator for complete accuracy of paint control. n Suitable for use with UV paint (using the available to order black gravity cup) Weight with Cup: 437g Dimensions with Cup: 26 x 16 x 7 cm Air inlet couplings: 1 /4" Deposit capacity: 125 ml Design pressure: 8 bar Max inlet pressure: 2 bar Max application distance: 15-18 cm Max paint flow output: Mini AQUA: 110 g/min, Mini HVLP: 105 g/min Air consumption: Mini AQUA: 190 L/min, Mini HVLP: 310 L/min Average sound level: 81dB Part Number Needle & Nozzle Air Cap Description Mini Xtreme EPA SA10111801 0.8 MINIAQUA Fine feathering, solvent-based basecoats SA10111802 1.0 MINIAQUA Retouching, feathering, waterborne and solvent-based basecoats, clearcoats SA10111803 1.2 MINIAQUA Clearcoats, UV paints 14 Automotive

Sagola Spray Guns PROFESSIONAL PAINTING SYSTEMS 403 Spray Gun 475 Miniature Gravity Feed Spray Gun The 403 G HVLP has been specifically designed by Sagola to give outstanding finishes when used with the latest paint technology, specifically waterborne paints. Suitable for larger spot repairs and up to medium sized general repair. The 403 G HVLP is supplied as standard with Gravity Cup, gauge/regulator. n HVLP system, 72% transfer efficiency n Compact ergonomic design provides ease of application n Precision engineered to eliminate the use of o-rings n Single mechanic spindle, low spare/maintenance n High application speed n Low mist n 400 ml gravity cup Air pressure in cap: Inlet working pressure: Part Number Needle & Nozzle Air Cap 0.68 bar max. 2 bar Description Gravity 403G HVLP (Standard Air Consumption 370 l/min) SA10111008 1.4 11 Very high quality finishes SA10111009 1.3 11 Touch ups, auto parts coating, fade-outs SA10111010 1.4 10 Low consumption - very low mist Suction 403 HVLP (Standard Air Consumption 360 l/min) SA10110804 1.6 11 Touch ups, auto parts coating, fade-outs SA10110805 1.8 11 Auto parts coating Suction 403B HVLP (Standard Air Consumption 360 l/min) SA10110908 1.0 12 Auto parts coating - very high quality finishes SA10110907 0.8 12 Touch ups - auto parts coating SA10110909 1.2 12 Very high application speed n Gravity spray gun - ideal for retouching, shading or small repairs n Precise fan adjustment with excellent finishing capabilities n Light, ergonomically designed for ease of use n Low air consumption, 110 ltr/min - 3.5 bar n 125cc cup, with anti-drip and paint filter included Inlet working pressure: Part Number Needle & Nozzle Air Cap Gauge - Optional extra Aerographic gravity feed spraygun ideal for smart repair and sprayed artwork. 3.5 bar Description Gravity 475 (Standard Air Consumption 110 l/min) SA10140703 1.0 10 Touch ups metallic, small pieces SA10140701 0.5 05 Touch ups, metallic paints SA10140702 0.8 05 Fade-outs, labelling SA10140704 0.5 R5 Lines, rounded spray jet Automotive 15

Sagola Spray Guns PROFESSIONAL PAINTING SYSTEMS Pressure Pot 6110 INOX Premium 429 N Gravity For up to date information and prices please visit our web site - www.redashe.co.uk The Sagola range of exceptional quality pressure pots are manufactured from stainless steel, allowing many different types of coating to be used, including Aqua based. Fitted with Dual air regulators and air gauges as standard this pressure pot offers precise control of product to the gun and precise control of the air supply. n 10 litres capacity n Stainless steel body n Top product outlet n Working pressure: 4 bar n Double regulator n Manual stirrer n Optional stainless interchangeable tank Part Number SA 105 407 01 Larger capacity pressure pots available Working pressure: 4 bar 6110 INOX Approvals: Spain AP 1070 FBZ 2330 France CODAP United Kingdom British Standard 1101-1977 Germany A.D. Merkblätter CERTIFICATION NUMBER FBC - 9168 The Sagola Hopper Gun is extremely versatile; it will spray masonry and high build paints, and texture finishes. The 429N is also used for non-slip coatings commonly used in a marine environment, or on steel work. The gun will apply decorative flakes, render, waterproofing and tanking coatings. Supplied with three nozzles 4.5 mm, 6mm and 8mm. Ceiling elbow available. n Product and air flow regulators. n 5-litre nylon plastic cup with handle. n With closing valve for air inlet. n Nozzle and needle in stainless steel. n Includes 4.5, 6 and 8 mm. nozzles. n Anti blockage system. n Trigger holding system for easier continuous use. n Surfaced with a non-stick coating that makes cleaning easier. n Air consumption: 170 l/min. - 3,5 bar. n Optional elbow for ceilings. Part Number SA 201 407 01 Pressure Version available Air Consumption: Inlet working pressure: 170 l/m 3.5 bar 16 Automotive

Sagola Spray Guns PROFESSIONAL PAINTING SYSTEMS 5050 Air Filter Model 5050 is an air-purifying filter, ideal for the pre-filtration in industrial airlines. Line Pre-filter for: outlet of medium compressor (inlet 1/2 ), level changes in the network, inlet to booths. FEATURES (Part NO. SA10720301): n Purificator filter + manometer n Ideal for prefiltering in industrial airlines n Triple filtering system n Holds water, oil and other impurities n Automatic drain system 5100 Filter Regulator FEATURES (Part NO. SA10730202): n Air filter + pressure regulator + manometer n 2 connectors (for two air tools) n Filtering + optimum flow and pressure regulation n Triple filtering system. Traps water and impurities n 8 micron sinterized bronze filter n Automatic drain system + regulator with assisted flywheel 5200 Double Coalescent Filter Regulator FEATURES (Part NO. SA1070304): n Double air filter (coalescent) + pressure regulator + manometer n Industry and body workshop. Traps water and impurities n Quadruple filtering system. Air is purified in a 99% n 8 micron sinterized bronze filter n Automative drain system + regulator with assisted flywheel 5300 Triple Coalescent Filter Regulator The 5300 offers the maximum filtration level in spray booths and painting lines with high air quality demand. Ideal for waterborne paint and where volatile organic fumes are a problem. Sinterised brass 8-micron pre-filtration is incorporated, followed by a 0.01-micron coalescent filter and final filtration by a wide surfaceactive charcoal filter. In addition to water and impurities, this process eliminates volatile organic fumes and foul air. 5050 air filter / 5100 filter regulator Air Flow: 2500 l/min (88 cfm) Air inlet: 1 /2" BSP Air Outlet: 1 /4" BSP Max working pressure: 12 bar (174 psi) Max Temperature: 180 C (100 F) 5200 & 5300 FILTER REGULATOR Air Flow: 2500 l/min (88 cfm) Air inlet: 1 /2" BSP Air Outlet: 3 /8" BSP Max working pressure: 12 bar (174 psi) Max Temperature: 120 C (67 F) Automotive 17

Spray Gun Holder EGH SPRAY GUN HOLDER The spraygun holder allows expensive guns to be stored correctly while not in use. Powerful magnets hold the spraygun holder in place and it is supplied with an integral paint filter holder: 2 gun capacity. n 2 gun capacity n Paint filter holder n Magnetic n L x H x D - 14 x 23 x 20cm Paint Drying System SUPERFLOW AIR DRYER GUN The Superflow Air Dryer Gun has been specifically designed to give outstanding performance when used with the latest paint technology, specifically waterborne paints. The Superflow Air Dryer uses a Venturi effect to increase air flow through the gun so drawing more air across the panel. Suitable for all sizes of repair. n Ideal for waterborne paint n Stainless steel air filter n Air switch included n Adjustable air flow For information on Sagola Painting systems please see pages 160-167. 12 month warranty on stand Working pressure: Air consumption: Size (W x D x H): max. 8 bar 6000 lt./min 800mm x 500mm x 1195mm expandable to 2390mm 18 Automotive

Minivent Extractor R1294/R2055 The Drester Minivent Extractor provides maximum extraction. Used as a general air extractor or more specifically over paint mixing or chemical analysis benches or to extract welding or exhaust fumes. The Minivent is the perfect answer to your fume extraction problems. All steel construction, the Minivent combines high volume extraction with low noise and low energy consumption. The Minivent is the ideal compliment to the new Redashe Boxer spray gun cleaners or to any other machine or process where there is a need to remove fumes from the atmosphere and where a short extraction distance facilitates a smaller unit installation. The Minivent is versatile. Reverse the principle and supply fresh air to work surfaces or use Minivent as a cooling fan. Available in three phase or single phase versions. No. R1294. No. R2055. 1-phase, 220V 50Hz, 180W. Rating Eex. ATEX approved category 3 (Conforms to BS 5345 zones 111). Suitable for extraction of explosive fumes (mount externally). 3-phase, 415V, 50Hz, 250W. Rating Eex. ATEX approved category 2 (Conforms to BS 5345 zones I+II). Suitable for extraction of explosive fumes (mount internally). DIMENSIONS Inch mm a 12 1 /2" 315 b 4 1 /3" x 2 3 /4" 110 x 70 c 13 1 /2" 340 d ø5" ø125 e 12" 300 Flame Proof Heaters MIXING ROOM HEATERS The Redashe Flame proof heaters feature all stainless steel construction and are approximately half the size of our original heaters, making them easier to install and clean. Why do you need a flameproof heater, all areas where there is a potential risk of explosion are covered by ATEX Legislation, all equipment used in these areas must be certified & marked with the Ex symbol. Most Automotive Paint Manufactures recommend that water based paints should be stored at an ambient temperature of not below 5ºc and mixed above 15ºc. At 0ºc the water content in the paint, can freeze and could irreparably damage your stock. Fitting a Redashe Mixing Room Heater could eliminate this risk. A range of models are available to suit most sizes of mixing room. The correct model for your installation could vary dependant on the number of air changes per hour, the location and fabric of the building. Contact your Redashe distributor for details. All heaters are rated at 230v AC 50HZ and carry full ATEX certification for gas and dust hazards. Classification zone 1 & 2 where the flammable atmosphere is a group IIA, IIB or IIC gas. Approved EExe II version to EN50014 and EN50019. Suitable for operating in ambient temperatures from 20 to +40 C. Standard temperature class T3, weatherproof to IP66. Cabinet heaters also available. Part Number Approx Room Size m 3 Voltage Wattage Length mm Width mm Height mm Weight kg IF-CAW050 4-6 230 500 400 160 200 6.5 IF-CAW100 7-11 230 1000 650 160 200 9.1 IF-CAW150 12-17 230 1500 880 160 200 14 IF-CAW200 18-24 230 2000 1150 160 200 15.3 IF-CAW300 25-34 230 3000 1590 170 200 22 IF-CAWTherm Thermostat (recommended) suitable for all models ISAT-2 Thermostat (Safe Area) suitable for all models Automotive 19

Bodyshop Trestles EBS1 / EXS2 / EUS3 EBS1 WORKSHOP TRESTLES Ideal for spraying horizontally positioned parts. Height adjustable and equipped with protective covers. The trestle folds away to save space. Rubber end caps are fitted to prevent slippage. n Foam protection covers n Solid base bar n Easy to store n Simple to use chain adjustment n H 106.5 x L 70 x W Max 96cm n Weight 6.5kgs EXS2 EUS3 EBS1 EXS2 WORKSHOP TRESTLES Ideal for spraying horizontally positioned parts and bumpers. Height adjustable. The trestle folds away to save space. Rubber end caps are fitted to prevent slippage. n The trestle folds away to save space. n Easy to use clutch adjustment n Complete with adjustable bumper extension arms n Weight 7.5kgs n Plastic end caps to prevent damage to parts and stand movement EUS3 WORKSHOP TRESTLES Very strong and sturdy trestle. Ideal for spraying horizontally positioned parts designed for some of the largest panels. Length and width adjustable. Supports heavy objects. n Plastic End Caps to prevent damage to parts and stand movement n Easy to adjust n Extremely stable EXS2 EXS2 EBS1 TECHNICAL DATA Model Length Height EBS1 116cm 70cm EXS2 61cm Adjustable between 65-120cm EUS3 Adjustable up to 130cm Adjustable up to 95cm Bodyshop Spray Stands EST1 / EST2 EST1 REDASHE DOOR STAND This universal door stand has been designed to support car doors and other parts. Remains stable and manoeuvrable even with the largest panels. Fully galvanised steel construction. n Wide wheel base provides stability and manoeuvrability n Two extension bars provide extra height or width n Adjustable brackets provide multiple hold positions EST2 SPRAY STAND Very stable and very manoeuvrable. The panels to be sprayed can be adjusted to all positions. An extension is included to enable several parts to be sprayed at the same time. Equipped with spray gun holder. Galvanised steel construction. n Wide wheel base provides stability and manoeuvrability n Extension bar provides extra area for spraying large or additional parts n Adjustable brackets provide multiple hold positions n Easy to use foot operating locking system allowing positioning from horizontal to vertical For up to date information and prices please visit our web site - www.redashe.co.uk TECHNICAL DATA Model Length Height Depth EST1 100cm 125cm 60cm EST2 150cm Up to 150cm 100cm 20 Automotive

Bodyshop Paper Stands EPS2 / EPS3 / EPS5 EPS2 REDASHE PAPER STAND SMALL Very stable and easy to move. Can be fitted with 3 paper sizes, 30-60-100 cm. Tape dispenser included. Easy paper exchange system. n Spring loaded tape dispenser keeps the masking tape taut n Serrated paper cutter n Wide wheel base provides stability and manoeuvrability n Angled paper holders provides balance and also provides stability n Spare tape holder n Over sized paper holders allows all paper sizes up to 100cm to be used EPS2 EPS3 REDASHE PAPER STAND MEDIUM Very stable and manoeuvrable. Can be fitted with 3 rolls of different widths. 2 tape holders, for extra stock. Easy paper exchange system. Maximum paper width is 100 cm. EPS3 n Spring loaded tape dispenser keeps the masking tape taut n Serrated paper cutter n Wide wheel base provides stability and manoeuvrability n Paper holders allow all paper sizes up to 100cm to be used n Paper holders are sprung loaded to prevent paper spill n 2 spare tape holders EPS5 REDASHE PAPER STAND LARGE Very stable and manoeuvrable. Can be fitted with 5 rolls of different widths. 2 tape holders, for extra stock. Easy paper exchange system. Maximum paper width is 120 cm. n Extra large size allows all types of paper and plastic film to be stored in one workstation n Spring loaded tape dispenser keeps the masking tape taut n Serrated paper cutter n Wide wheel base provides stability and manoeuvrability n Paper holders allow all paper sizes up to 120cm to be used n Paper holders are sprung loaded to prevent paper spill n 2 spare tape holders TECHNICAL DATA Model Length Height Depth EPS2 145cm 100cm 67cm EPS3 133cm 118cm 58.5cm EPS5 150cm 136cm 60.5cm EPS5 Automotive 21

Redashe Bodyshop Equipment WORKTABLES / WORK PLATFORMS Redashe Worktables ET120 / ET120 INOX Stainless Steel topped worktable, equipped with a hood that can be connected to the central air extraction system, providing effective removal of all harmful solvent fumes. An ideal working height is provided and the stainless steel top is very easy to clean. The shelf beneath the tabletop stores square tins in a tilted position for safe and convenient use of thinners and hardeners. A bottom shelf is provided for storing stock and adjustable feet ensure a level working platform. Powder Coat INOX n Stainless steel work top n Extraction canopy n Extraction point n Angled storage shelf n Flat storage shelf n Adjustable feet TECHNICAL DATA Model Length Height Depth ET120 120 cm 140 cm 60 cm ET120 INOX 120 cm 140 cm 60 cm Can Shaker ESA-1009 CAN SHAKER Designed to aid in the mixing of paint, capable of mixing up to 5 litre down to half litre of paint tins. air driven to ensure simple installation and use. Comes complete with oiler, 3 bolts to mount unit to work bench and allen key. n Max 5 litre cans n Complete with mounting bolts & allen key n Air switch n Automatic oiler n The length of time required for mixing depends on the size of the tin to be mixed this should be between 1min 30 secs and 2 minutes n Protective impact resistant cover over pneumatic parts n Non slip cover over can grips n Simple to operate vice grip action n Easy to use lubrication points Air Inlet: 1 /4" Capacity: 5.0 l (1 gallon) Air consumption: 3 cfm Max opening: 290mm 22 Automotive

Redashe Paint/Waste Collector WM-90-1 / WM-90-2 / WM-90-3 The Redashe Waste Management improves your environment and gets rid of paint residues and other waste in a safe and neat way in compliance with the legislation. The design of the Redashe WM-90 corresponds to the Redashe Gun Cleaners. By placing the units next to each other you create a smart, homogeneous look in the work shop. You also get a more efficient work flow and working environment. The Redashe WM-90 comes in three different models: one for liquid waste, one for solid waste and one model combining the two. Each model has two compartments, so you can easily separate two different types of waste. Extraction can be connected to the Redashe WM-90 either directly or through a hood. Redashe WM-90 is an ATEX category 2 unit, which can be placed in zone 1, for example in the mixing room. It complies with all applicable European directives and standards. Weight: Dimensions: If extraction is desired Compressed air needed for extraction: 42 kg 1025mm (H), 780mm (W), 570mm (D) 7-12 bar (110-180 psi), 450 l/min (16 cfm) REDASHE WM-90-1 The sloppy, smelling funnels and drums on the floor can be removed for good. By emptying the paint residues in a Redashe Waste Management unit, the paint and solvent residues are stored in a safe way in compliance with current European legislation. You can also avoid sticky paint on the floor and maintain a neat appearance. Redashe WM-90-01 has two funnels with grids, on which cans can be left to drain. The waste is collected in drums underneath. The two compartments make it easy to separate for example waterborne paints from solvent borne. Extraction is not supplied as standard. For costings please call a Redashe representitive REDASHE WM-90-2 This model combines a compartment for liquid waste and a compartment for solid waste such as solvent contaminated paper or cloth. Leave the can to drain on the funnel grid and when dry, throw the can into the adjoining bin compartment. REDASHE WM-90-3 The Redashe WM-90-3 provides two compartments for solid waste like paper, can, spray cans, filter boards and solvent contaminated materials. redashe WM-90-1 redashe WM-90-2 redashe WM-90-3 Automotive 23

Wall Mounted Manual Can Crusher EPC10 WALL MOUNTED MANUAL CAN CRUSHER (MAX 10 LITRE) Redashe s Manual Can Crusher is ideal for crushing cans that have been used to store solvent-based liquids. Crushing cans reduces the volume of waste for disposal by up to 90% resulting in fewer skip collections and lowering costs. The unit must be wall mounted n Manual power maximum 10 litre wall mount n Reduce waste can volume by up to 90% n Keep working area clean and tidy n Reduce waste disposal costs (fewer skips) n Crush cans up to 10 Litre n Safe simple operation n Extremely Powerful up to 1500kg of crushing Force For up to date information and prices please visit our web site - www.redashe.co.uk Technical Data Energy source Man power (1500k of force) Capacity Tin cans up to 10 litres Size (cm) L x W x H: 46 x 45 x 120 Weight 65 kg Pneumatic Can Crusher EPC30 PNEUMATIC CAN CRUSHER (MAX 30 LITRE) Redashe s Pneumatic Can Crusher is ideal for crushing cans that have been used to store solvent-based liquids, crushing the can reduces the volume of waste for disposal by up to 90% so reducing the number of skip collections. The Crusher has a drip tray to collect spills from cans that have had liquid left in them, and a door interlock prevents the unit from being opened whilst the press plate is in motion. The unit can be mounted on the wall, floor or bench. n Pneumatic wall, floor or bench mount (Max 30 litre) n 30 litre has door inter lock (can not be opened while in motion) n Reduce waste can volume by up to 90% n Keep working area Clean and tidy n Reduce waste disposal costs (fewer skips) n Crush cans up to 30 litres n Safe, simple operation Technical Data Energy source Compressed air Working Pressure 6-8 bar Volume of air required 50 litres of a complete stroke Press pressure 2000 kg Size without stand (L x D x H) 45 x 45 x 122 cm Size stand only (SBP02TA)(L x D x H) 80 x 66 x 87 cm Weight 105kg 24 Automotive

Paper Baler EPP REDASHE PAPER BALER As environmental issues come increasingly to the fore, the modern bodyshop owner needs to provide a safe, clean environment for employees. Being able to compress most of the waste a bodyshop produces, helps to keep the area in and around the bodyshop clean and safe. The space saving on waste storage alone will help to reduce overheads and add to bodyshop efficiency, add to this the reduction in the number of skips needed to take the waste away, and it is easy to see that these machines will quickly pay for them selves. The volume of your paper and plastic film waste can be reduced by up to 95% leaving you easy to manage bales. n Reduce waste paper volume by up to 95% n Keep working area clean and tidy n Reduce waste disposal costs (fewer skips) n Crush paper, plastic film and foam n Waste paper taking up an area of 3m can be reduced to 0.5m, which can be easily moved and disposed of safely For up to date information and prices please visit our web site - www.redashe.co.uk Power supply Air pressure required Press pressure Cycle time Machine size Weight Container size Bundle size Bundle weight approx Technical Data Compressed air 6-7 Bar 1500 Kg 15 seconds 90 x 85 x 185 cm 180 Kg 80 x 38 cm 80 x 50 x 70 cm ± 35 Kg Automotive 25

2-in-1 Waste Oil Drainer JAODE090E Designed to drain waste oil by either gravity or suction from engines, gear boxes and differentials of all vehicles. The emptying of the drained oil inside the reservoir is air operated. n Combination suction and gravity waste oil drainer unit n Extracts used oil from any vehicle using the venture/vacuum extraction system, suitable for draining oil by gravity from engines, gearboxes, and differentials on all vehicles. n Includes six suction probes (metal and flexible) equipped with quick couplers for fluid extraction. n Adjustable collection bowl height n Self-evacuating feature makes emptying clean and simple. Tank capacity (litre/gallon): 90/24 Max. draining capacity (litre/gallon): 80/21 Air pressure for vacuum (bar/psi): 7-8/100-114 Depressurization time (sec): 15-180 Noise level (db): 75 Suction speed (litre/min/gallon/min): 1.5-2/0.4-0.5 with oil at 70-80 C, probes 6mm Total suction capacity (litre/gallon): 65-70/17-18.5 Draining hose length (m/inch): 2/79 Suction hose length (m/inch): 2/79 Max discharge pressure (bar/psi): 1/14 Tank size (mm/inch): 406x780/17x64 Collection bowl capacity (litre/gallon): 18/4.75 Collection bowl adjustable height (mm): 1000-1700 Overall size (mm): 630x415x1700 G.W. (kg/lb): 41/90.4 empty Warning: Do not use with corrosive or inflammable products Adaptors for BMW and Volkswagen are also included Picture depicted - JAOE1090 26 Automotive

Air Operated Waste Oil Drainers JAOD3090 Designed to drain, by gravity, waste oil from engines, gear boxes and differentials of all vehicles. The emptying of the drained oil inside the reservoir is air operated. n Air operated oil drainer with centre mounted adjustable collecting bowl n Adjustable collecting bowl height to work with jack, lift or servicing cock n Equipped with a valve for collecting bowl to inspect drained oil before it enters the reservoir n Can be equipped with a special support to allow filters to drain Tank capacity (litre/gallon): 90/24 Collection bowl capacity (litre/gallon): 18/4.75 Collection bowl size (mm/inch): 400x190/16x8 Maximum height (mm/inch): 1150/45 Minimum height (mm/inch): 1850/72 Hose length (m/inch): 2/79 Air pressure for empties (bar/psi): 1/14 Tank size (mm/inch): 406x780/16x31 Unit dimensions (mm/inch): 630x415x1160/ 25x15x45 G.W. (kgs/lbs): 32/70.5 empty Packing Volume (cbm/cft): 0.28x10 Collection bowl packing (cbm/cft): 0.02/0.7 Warning: Do not use with corrosive or inflammable products For up to date information and prices please visit our web site - www.redashe.co.uk Air Operated Oil Drainer JAOE1090 n Extract used oil and other fluids from any vehicle using this venturi-vacuum extracting system n Includes six suction probes (metal and flexible) equipped with quick-disconnect couplers for fluid extraction n Self-evacuating feature makes emptying clean and easy Tank capacity (litre/gallon): 90/24 Max. Draining capacity (litre/gallon): 70/19 Air pressure for vacuum (bar/psi): 7-8/100-114 Depressurization time (sec): 150-180 Noise level (db): 75 Suction rate (litre/m gallon/m): 1.5-2/0.4-0.5 Total suction capacity (litre/gallon): 65-70/17-18.5 Suction hose (m/inch): 2/79 Draining hose (m/inch): 2/79 Air pressure for empties (bar/psi): 1/14 Overall dimensions (mm/inch): 630x415x1050/ 25x16x41 G.W. (kgs/lbs): 31/68 empty Packing Volume (cbm/cft): 0.28/10 Warning: Do not use with corrosive or inflammable products Automotive 27

Commercial Oil Drainer J1710002 Large capacity low level oil drainer allows oil to be drained with out lifts or a service pit. A long handle and swivelling front wheels allow the unit to be positioned precisely under the vehicles sump plug or transmission. The unit has a drain tap and is supplied with a sturdy steel mesh to prevent the loss of tools or other items into the waste oil. Capacity (litre/gallon): 68/18 Height (mm/inch): 200/8 Length x width (mm): 1200x645 Handle length (mm): 860 n Low level wheel mounted oil drainer n Suitable for gravity draining of engine gearbox and differential oils for vehicles not using a pit or ramp n Ideal for commercial vehicle applications For up to date information and prices please visit our web site - www.redashe.co.uk Oil Drainer Evacuation Kit JEVAC Wall mounted evacuation kit suitable for use with JAOD3090, JAOE1090, JAODE090E and J1710002 oil drain units. This kit is designed to help shorten the evacuation time of the reservoir. n J100-S 1:1 Ratio stub pump n JWB10001 Wall mounting bracket n JAFC2000 Air regulator/lubricator n 2m Air supply hose complete with fittings n 2m Vacupress drain hose c/w dry break couplings Output Capacity: 18L/min Air Consumption: 8 bar - 100 L/min Air Inlet Connection: 1 /4" quick plug Warning: Do not use with corrosive or inflammable products 28 Automotive

Workshop Creeper Boards and Stools WORKSHOP MOBILITY Plastic Creeper RA680 This super-rugged one-piece low-profile creeper just may be the last creeper you will ever buy! This tough creeper is built to last with a body-fitting design that was developed through testing to provide optimum comfort. Super-rugged one-piece, 6 wheel low-profile creeper, moulded in high impact polymer, body-fitting design to provide optimum comfort. Tool trays are moulded into each side for convenient storage whilst working under vehicles. n Manufactured from high impact polymer composite n Swivel wheels for easy manoeuvrability n Integral tool trays n Padded head rest n Low profile Steel Creeper RA645 This six wheeled, easy foldaway creeper is manufactured in Heavy-duty tubular steel with a powder coated paint finish. Padded vinyl covered back and headrest for comfortable use. 360 smooth rolling swivelling casters for easy manoeuvrability n Padded vinyl covered back and headrest for comfortable use n 360 smooth rolling swivelling casters - easy manoeuvrability Work Seat with Tool tray RA620 This mechanics padded and height adjustable work seat has a temporary tool holder in the base section, the seat can rotate through 360 and has a 120mm lifting range. n Padded seat for comfort n Height adjustable, 120mm lifting range n Base doubles as a temporary tool storage area n Smooth running, 360 swivel, ball bearing casters For up to date information and prices please visit our web site - www.redashe.co.uk Automotive 29

Redashe Coolites - LED Lead Lights WORK LIGHTS Coolite Rechargeable J2000R n Shock, water and oil resistant n Battery charger uses standard 240v AC power n With 30 LEDs (5mm diameter) which equates to a 40 watt incandescent bulb n 12 month manufacturer s warranty n With low self discharge n ROHS compliant TECHNICAL DATA Active Life: Approximately 8 hours Full recharge time: Approximately 3 hours Batteries: 3.7v-3600mA/h.Li-ion Weight: 400g For up to date information and prices please visit our web site - www.redashe.co.uk Coolite Rechargeable J1500 n Powered by 30 high intensity LED bulbs n High visibility colours n Rechargeable from either mains or 12v in-car supply n Ten times the efficiency of incandescent bulbs n Shock resistant n Oil resistant n Battery: Li-polymer 3.7v 1800MAH n Active life 5 hours n Full recharge time 4.5 hours n Charger input: DC11-28v n Low self discharge n Blister packed Coolite Rechargable J3000 n Lithium -ion battery - 3.7 V 3600mAh n Charging from either mains or 24/12V n Active life - 6 hours n Full Recharge time - 5 hours n Foldaway swivel hook n Extremely long bulb life n 24 LED elements - 20 Flux LED s for lighting, 4 to signify state of battery charge n Shock, Water and Oil Resistant n Polycarbonate highly polished reflector n Strong base magnet, enables lamp to sticks to any ferrus surface n Supplied with bracket for wall mounting NEW 30 Automotive

Redashe Coolites - Rechargeable LED Lead Lights WORK LIGHTS Coolite 230v AC Input J000L6-30/J000L6-60 n 10x more efficient than incandescent bulbs n Shatterproof, water and oil resistant n 30 extremely long life LEDs (J000L6-60 has 60 LEDs) n On/off switch n 1-year warranty n ROHS compliant n Mains charging TECHNICAL DATA Active Life: Approximately 10 hours Full recharge time: Approximately 4 hours Batteries: 7.2v 1800mA/h-NiMH Charger input: 85-265v AC 60/50Hz Coolite Rechargeable J000L8-30 n 10x more efficient than incandescent bulbs n Shatterproof, water and oil resistant n 36 extremely long life LED s n Two function On/off switch Lamp or torch n 1-year warranty n In-car charging or mains n Magnetic base n Combined Hook & Stand n 6 LEDs in the top for use as a flashlight n ROHS compliant TECHNICAL DATA Active Life: Approximately 10 hours Full recharge time: Approximately 2.5 hours Batteries: 7.2v 1800mA/h-NiMH Charger input: 85-265v AC 60/50Hz Coolite 230v AC Input J000L1100 UNDER BONNET LAMP n Shatterproof, water and oil resistant n Powered by 120 high intensity LED bulbs n Ten times the efficiency of incandescent bulbs n Extremely long life bulb n On/off switch n ROHS compliant n 8 metre cable Input: TECHNICAL DATA Standard 230v AC input Automotive 31

Automotive Cable Reels and Lights 240v > 12v or 24v RC12/24 Series Compact Spring Rewind Cable Reels The RC12/24 compact spring rewind cable reels combine convenient storage of electrical cable with the additional choice of three different types of light unit. All reels are constructed in high impact polypropylene for maximum durability n Compact, lightweight design, just 7.5lbs (3.5kgs) n Supplied with fitted cable n Integral wall/overhead mounting swivel bracket n Fitted inlet cable for connection to 240v supply n 240v power in, choice of either 12v or 24v power out n Latching of cable at any length or free-run option n Fully automatic spring rewind n Low effort easy-to-use rewind tension n 12 month manufacturers warranty (excludes cable) n Choice of three light units GiroLight The Giro Light is the classic portable light and most widely utilised in the automotive sector with a revolutionary design for conformity to the strictest European safety standards. TopLight The Top Light is a portable light with all the functionality of the Giro Light but with a transparent plastic cap for the protection of the incandescent bulb. LightyLight The Lighty Lite presents a sleek form for easy access to even the most hard-to-reach areas. Supplied as standard with a 9w cold light neon bulb, which eliminates potential risk of burning the operator TopLight LightyLight GiroLight Model Ref Cable Length No. of Cores Input Output Light Supplied Max in/out Amp Reel Colour RC12V/G 15m (50') 2 x 1mm 240v 12v Girolight (60w) 3-10 Grey/Black RC24V/T 15m (50') 2 x 1mm 240v 24v Toplight (60w) 3-10 Grey/Black RC12V/T 15m (50') 2 x 1mm 240v 12v Toplight (60w) 3-10 Grey/Black RC24V/L 15m (50') 2 x 1mm 240v 24v Lighty Lite (9w) 3-10 Grey/Black Model Reference Reel Dimensions (including bracket) Approx Weight W H D RC12/24 7 3 /4" 11 7 /8" 15 3 /4" 7.5lbs 32 Automotive

Reelworks - 701 Series Hose Reels Spring Rewind Hose reels The 701 Series are constructed in blue impact resistant polypropylene. Each unit comes supplied with fitted hose and integral wall/overhead pivoting mounting bracket. Both models are supplied with 15m of hose and are suitable for either compressed air or water delivery. n Light weight and durable just 12.5kgs n Constructed in high-impact UV stabilised polypropylene n Supplied with fitted PVC hose for immediate installation n Fully assembled, includes 3' connecting hose n Suitable for compressed air and water n Integral wall/overhead mounting bracket n Latching of hose at any length n Fully automatic hose rewind for neat and tidy storage n Virtually maintenance free n 12 month manufacturer s warranty ALL SUPPLIED WITH FITTED HOSE D Item Temp. Max Pressure Hose Capacity Dimensions NW/GW C (psi/bar) I.D. (inch) Length (ft/m) (cm) (kgs) C701-100 60 300/20 3 /8" 50'/15 40H x 22W x 44D 12.5 C701-200 60 300/20 1 /2" 50'/15 40H x 22W x 44D 12.5 W Please see our Hose Reel Section on pages 5-58 for our full range of Hose Reels Digital Tyre Inflator RAH300 DIGITAL TYRE INFLATOR The RHA300 digital hand held tyre inflator is easy to operate, has a large digital display, and has the facility to display pressure in either psi, bar, kpa, or kgf. Robust design, casing manufactured in cast aluminium, with rubber cover for extra protection. n Large easy to read digital display (with back light) n Unit is calibrated to measure PSI, BAR, KPA,or KGF n Measuring range 0-12Bar (0-175PSI) n Accuracy of measurement to + / - 1% n Comfortable non-slip handle n Durable, aluminium Casing with rubber cover for added protection n Long battery life with low battery warning indicator n 21 Hose with Clip-on air chuck n Max inlet pressure 15bar/218psi/1500kpa For up to date information and prices please visit our web site - www.redashe.co.uk Automotive 33

Pneumatic Brake Cleaner FAST AND EFFICIENT BRAKE CLEANING The Redashe Brake Cleaner offers a reliable safe way of cleaning away brake dust in the workshop; the unit helps keep the working environment clear of brake dust particles. The washbowl, which is Stainless steel, can be adjusted through 180 º and can be adjusted up or down. The large 100mm caster make light work of moving the unit around the workshop. n Air blade dryer n Flow through brush n Solvent spraying jet n Adjustable height for all applications n 100mm casters make moving the brake cleaner easy; two locking casters keep the brake washer steady when required n Fast and thorough brake cleaning n Safe and easy to use n No unhealthy airborne brake dust n Uses water based brake cleaner. Bowl dimensions: Width 410mm, Length 680mm, Depth 125mm Drum capacity: 40Ltr. Dimensions: Depth 740 x Width 390 x Min Height 1120 x Max Height 1570mm Air supply: 7-9 Bar (105-135 psi) Weight: 35kg Pneumatic Brake Bleeder FAST AND EFFICIENT BRAKE CLEANING Using the BV0004 Roby Vac pnuematically operated brake bleeder is a quick and efficient solutuion to bleed hydaulic brake systems. The robust 9.5 lite capacity unit is easy to carry around, and simple to operate. n Handy carry handle n Simple to operate n Tough casing manufactured from Nylon 6 n Supplied 0 to -1 bar vacuum guage n Supplied with 2 mtr suction hose n Hard wearing aluminium air mover n Air outlet silencer for quieter operation Recommended operating vacuum: Tank capacity: 0.7 bar 9.5ltrs For up to date information and prices please visit our web site - www.redashe.co.uk 34 Automotive

Toptul Hand Tools HAND TOOLS Toptul professional hand tools are competitively priced and quality focused, designed and built for industry professionals. TOPTUL professional tools are successfully used in many different types of industry, such as automotive, industrial, heavy industrial, military, aerospace industries, and all kind of mechanical services. 10-Piece Stubby Metric Combination Wrench Set RAAF1001 - Stubby Metric Combination Wrench Set: Constructed in Chrome Vanadium Steel strong and durable, high quality, robust, exceeds international ASNI and DIN standards, superb mirror finish, easy clean, professional quality for convenient operation in confined spaces. 10pc sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm. 12-Piece Metric Combination Wrench Set RAAE1210 - Metric Combination Wrench Set: Constructed in Chrome Vanadium Steel strong and durable, high quality, robust, exceeds international ASNI and DIN standards, superb mirror finish, easy clean, professional quality. Larger sizes available. up to 36mm. Sizes: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 17, 19mm. 10-Piece Extra Long Metric Combination Wrench Set RAAF1007 - Extra long Combination Wrench Set: Constructed in Chrome Vanadium Steel strong and durable, high quality, robust, exceeds international ASNI and DIN standards, superb mirror finish, easy clean, professional quality. Perfect when extra torque is required. 10pc sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm. 8-Piece Dynamic Drive Metric Combi Wrench Set RAAA0805-15 offset Dynamic Drive Combination Wrench Set: Constructed in Chrome Vanadium Steel strong and durable, high quality, robust, exceeds international ASNI and DIN standards, superb mirror finish, easy clean, professional quality. Designed for operating in a 30 restricted space. Supplied in a quality canvas kit bag. 8pc sizes: 10, 11, 12, 13, 14, 15,, 17, 19mm. Automotive 35

Toptul Hand Tools HAND TOOLS 7-Piece Metric Reversible Gear Wrench Set RAAM0708-72 Teeth gear construction with only a 5 increment between clicks for optimum fastening efficiency: Constructed in Chrome Vanadium Steel strong and durable, high quality, robust, exceeds international ASNI and DIN standards, super smooth satin finish. Supplied in a handy storage rack. 7pc sizes: 10, 11, 13, 14, 16, 17, and 19mm. 23-Piece Star Wrench Sockets & Key Wrench Set RAAT2301 - Star Wrench Sockets & Key Wrench Set: 23pcs contained in a plastic insert tray. Set contents: 4 pieces ¼ Drive star sockets, E4, E5, E6, E8, 6 pieces ½ Drive star sockets E10, E12, E14, E16, E18, E20, 9 pieces short type star key wrench set T10, T15, T20, T25, T27, T30, T40, T45, T50, 4 pieces star wrench E6 x E8, E10 x E12, E14 x E18, E20 x E24. Individual Large Standard Combination Wrenches 22-36 mm RAAB2222: Standard Combination wrench 22 mm. RAAB2424: Standard Combination wrench 24 mm. RAAB2727: Standard Combination wrench 27 mm. RAAB3030: Standard Combination wrench 30 mm. RAAB3232: Standard Combination wrench 32 mm. RAAB3636: Standard Combination wrench 36 mm. 18-Piece 1 /2" Drive Metric Socket Set RCAD1802 - ½" Drive Metric Socket Set: 18pcs contained in a Quality Metal Box with insert tray. Set contents: 15" Swivel handle, universal joint, quick release ratchet with comfort handle, 3" extension, 5" extension, 10" extension. Sockets 10, 12-14, 17, 19, 21, 22, 24, 27, 30, 32. For up to date information and prices please visit our web site - www.redashe.co.uk 36 Automotive

Toptul Hand Tools HAND TOOLS 25-Piece 3 /8" Drive Metric Socket Set RAAD2501-3 /8" Drive Metric Socket Set: Set contents: 25pcs (All 3 /8" Drive) Contained in an Quality Metal Box with insert tray. Contents quick release ratchet with comfort handle, sliding T Bar 16mm and 21mm magnetic spark plug sockets, 3" extension, 6" extension, sockets ranging from 6mm 22mm, + 24mm, universal joint. 10-Piece 1 /2" Drive Metric Hex Bit Socket Set RAAD1008 - ½" Drive Metric Hex Bit Socket Set, superb quality, extremely robust, SATIN finish, supplied in a quality metal box: 10pcs: ½" x 4, 5, 6, 7, 8, 10, 12, 14, 17, 19. 13-Piece 3 /8" Drive Standard Metric Socket Set RAAQ1302-3 /8" Drive Standard Metric Sockets: High quality, robust, exceeds international ASNI and DIN standards, maxi drive, flat to flat drive giving more turning power, thin wall design, allows easier access into restricted areas, constructed in CRV, strong, durable, superb mirror finish, easy clean, easily portable, supplied on socket rail with clips on carry handle. Sizes: 7mm 17mm + 19mm, 21mm. 13-Piece 1 /4" Drive Deep Metric Socket Set RAAQ1304-13pcs ¼" Drive Deep Metric Sockets: High quality, robust, exceeds international ASNI and DIN standards, maxi drive, flat to flat drive giving more turning power, thin wall design, allows easier access into restricted areas, constructed in CRV, strong, durable, superb mirror finish, easy clean, easily portable, supplied on socket rail with clip on carry handle. Sizes: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm Automotive 37

Toptul Hand Tools HAND TOOLS 13-Piece 3 /8" Drive Deep Metric Socket Set RAAQ1305-13pcs 3 /8" Drive Deep Metric Socket: High quality, robust, exceeds international ASNI and DIN standards, maxi drive, flat to flat drive giving more turning power, thin wall design allows easier access into restricted areas, constructed in CRV, strong, durable, superb mirror finish, easy clean, supplied on socket rail with clips on carry handle. Sizes: 7mm 17mm + 19mm, 21mm. 11-Piece 1 /2" Drive Deep Metric Socket Set RAAQ1107-15 ½" Drive Deep Metric Sockets: High quality, robust, exceeds international ASNI and DIN standards, maxi drive, flat to flat drive giving more turning power, thin wall design allows easier access into restricted areas, constructed in CRV, strong, durable, superb mirror finish, easy clean, supplied on socket rail with clips on carry handle 11pcs. Sizes: 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22mm. 8-Piece 3 /8" Drive Star Bit Set RAAG0803-3 /8" Drive Star Bit Set: Constructed in CRV, strong, durable, superb mirror finish, easy clean, supplied on socket rail with clips, 8pcs contents: T15, T20, T25, T27, T30, T40, T45, T50. 8-Piece: 3 /8" Drive Star Socket RAAG0801: High quality, robust, exceeds international ASNI and DIN standards, constructed in CRV, strong, durable, superb mirror finish, easy clean, easily portable, supplied on socket rail with clips. 8pcs contents: E8, E10, E11, E12, E14, E16, E18, E20. For up to date information and prices please visit our web site - www.redashe.co.uk 38 Automotive

Toptul Hand Tools HAND TOOLS 7-Piece: 3 /8" Drive Hex Bit Set RAAG0701-3 /8" Drive Metric Hex Socket: Constructed in CRV, strong, durable, superb satin finish, easy clean, supplied on socket rail with clips. 7pcs contents: 3, 4, 5, 6, 7, 8, 10mm. For up to date information and prices please visit our web site - www.redashe.co.uk 1 /2" Drive Quick Release Ratchet RHAG1626-1 /2" Drive Quick Release Ratchet: Constructed in CRV, strong, durable, ergonomic handle, comfortable to use, 36 gear design, 10 movement between teeth, superb mirror finish, easy clean, quick release mechanism, easy to remove and replace sockets, reverse lever, easy single hand operation to change direction. 3 /8" Drive Quick Release Ratchet RHAG1218-3 /8" Drive Quick Release Ratchet: Constructed in CRV, strong, durable, ergonomic handle, comfortable to use, 36 gear design, 10 movement between teeth, superb mirror finish, easy clean, quick release mechanism, easy to remove and replace sockets, reverse lever, easy single hand operation to change direction. 1 /4" Drive Quick Release Ratchet RHAG0813-1 /4" Drive Quick Release Ratchet: Constructed in CRV, strong, durable, ergonomic handle, comfortable to use, 36 gear design, 10 movement between teeth, superb mirror finish, easy clean, quick release mechanism, easy to remove and replace sockets, reverse lever, easy single hand operation to change direction. Automotive 39

Toptul Hand Tools HAND TOOLS 1 /2" Drive Flex Head Quick Release Ratchet RHLI1628-1 /2" Drive Flexible Quick Release Ratchet: Constructed in CRV, strong, durable, ergonomic handle, comfortable to use, 36 gear design, 10 movement between teeth, superb mirror finish, easy clean. 3 /8" Drive Flex Head Quick Release Ratchet RHLI1227-3 /8" Drive Flexible Quick Release Ratchet: Constructed in CRV, strong, durable, ergonomic handle, comfortable to use, 36 gear design, 10 movement between teeth, superb mirror finish, easy clean. 3 /8" Stubby Swivel Headed Ratchet With Bit Drive RJOM1216 - Stubby Swivel Head Ratchet with Bit Drive: Constructed in CRV, strong, durable, soft grip handle, 3 /8" drive + ¼" female bit driver, swivel head can be used through a full 180 for difficult access jobs, fine tooth, 72 teeth allows access into tight spaces, versatile can also be used in-line as a nut spinner. or ratchet screwdriver 3 /8" Stubby Swivel Headed Ratchet With Dual Drives RJMM1216 - Stubby Swivel Head Ratchet with Duel Drives: Constructed in CRV, strong, durable, soft grip handle, comfortable to use, dual drives, convenient ¼" & 3 /8" drives, swivel head can be used through a full 180 for difficult access jobs, fine tooth, 72 teeth allows access into tight spaces, versatile, can also be used in-line as a nut spinner. 40 Automotive

Toptul Hand Tools HAND TOOLS 1 /2" Drive Breaker Bar For up to date information and prices please visit our web site - www.redashe.co.uk RCFB1624-24" 1 /2" Drive Breaker Bar: Constructed in CRV, strong, durable, ergonomic design handle, essential for unfastening those extra tight nuts and bolts. Superb quality. Led Adaptor RBAR0203-3 /8" Drive LED Adaptor: LED light passes directly through the socket, supplied complete with 3 /8" (f) x ½" (m) spinner, supplied complete with spare battery set. RBAR0205-1 /2" Drive LED Adaptor: As above but 1 /2" Version. Magnetic Two Way Adaptor RAKA1923: ¼" x 3 /8" x 19 mm magnetic adaptor which can be used in conjunction with a 19 mm wrench, ¼" or 3 /8" drive sockets. RANA1619: Unique Socket Adaptor with Quick Release ½" x 19mm. RANA1213: Quick Release 3 /8" x 13mm. RANA0810: Quick Release ¼" x 10mm. NEW Go Thru Slotted & Philips Screwdriver raat0601 - Go Thru Slotted & Philips Screwdriver Set: Specially hardened and tempered SNCM+V Steel round blade, hex shoulder for use with spanners (extra leverage), high performance hardened magnetic tip, non-slip handle made from PP + TPR resins. Contents: Phillips PH1 x 75, PH2 x 100 Slotted 5.5 x 100, 6.5 x 150, 8 x 175, 10 x 200. Automotive 41

Toptul Hand Tools HAND TOOLS 8-Piece Non Slip Screwdriver Set RAAT0805-8 Piece Non Slip Screwdriver Set: Specially hardened and tempered, SNCM+V steel blade, high performance black hardened magnetic tip, ergonomically designed non-slip handle. Contents: Phillips PH1 x 80, PH2 x 100, PH3 x 150, PH2 x 25 Slotted 4 x 100, 5.5 x 100, 6.5 x 150. 31-Piece Screwdriver Bit Set RAAW1301-31pcs Screwdriver Bit Set: Contents: Phillips PH0, PH1 x 2pc, PH3, Pozidrive PZ0, PZ1 x 2, PZ2 x 2ps, PZ3 Slotted 4 x 0.5, 5.5 x 1, 6.5 x 1.2mm, Star Drive T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, ¼" male x ¼" female Magnetic Bit Holder. 3-Piece Assorted Pliers Set RAAT0302-3 Piece Assorted Pliers Set: Multi-purpose cutting and griping tools. Combination pliers 7" (L) Chrome Vanadium Steel, Heavy duty Diagonal Cutting Pliers 7" (L), Long Nose Pliers 8" (L) precision, hardened pliers head, high frequency hardened cutting edges, comfort non-slip handles, hot riveted ensures smooth action with no handle wobble. 4-Piece Circlip Pliers Set RAAT0404 - Circlip Pliers Set: Chrome Vanadium Steel, spring assisted opening for internal or external, circlip, anti-slip, turned tips, comfort non-slip handles. Contents: straight retaining ring pliers 7" (internal) 90 retaining ring pliers 7" (internal) comfort non-slip handles. 42 Automotive

Toptul Hand Tools HAND TOOLS 4-Piece Pliers Assortment Set RBAT0402: Chrome molybdenum steel, hot riveted pivot joints ensures smooth action and no handle wobble, comfort grip handles, bevelled cutting edge, precision cutting. Contents:- Combination pliers 7" Heavy duty diagonal cutting pliers 7" Long nose pliers 8", Bent nose pliers 8". 3-Piece Adjustable Wrench & Pliers Set RBAT0303 - Adjustable Wrench & Pliers Set: 10" 25.5cm curved jaw locking pliers with wire cutter, 10" 25.5cm groove joint water pump pliers, 10" 25.5cm opening 33.3cm adjustable wrench Extra Long Ball Point Hex Key Wrench Set RAAL0918 - Metric COLOURED Hex Key Wrench Set: Each hex key is a different colour allowing quick and easy identification of the one you need. DIN/ASNI standard, SNCM + V Alloy steel, durable, satin chrome finish 9pcs contents: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm. NEW 9-Piece Ball Point Hex Key Wrench Set RAAL0916 - Metric Long Ball Point Hex Key Wrench Set: Ball end allows the wrench to be used at an angle allowing greater access. Supplied on a convenient belt clip. DIN/ASNI standard, SNCM + V Alloy steel, durable, satin chrome finish 9pcs contents: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm. Dead Blow Hammer RAAB1038 - Dead Blow Hammer: Shot filled head helps to prevent rebound when surface is struck, ribbed handle helps to prevent slippage. Automotive 43

Toptul Hand Tools HAND TOOLS For up to date information and prices please visit our web site - www.redashe.co.uk 16 oz Ball Pein Hammer RAAC1035: 16 oz Ball Pein Hammer, superb quality, well balanced with hickory handle. 11" C Clamp RAAU1A11: Wide-opening jaws provide greater versatility in clamping a variety of shapes. Adjust the pressure by turning the screw to fit job. Constructed of highgrade heat-treated alloy steel for maximum toughness and durability. Guarded release trigger quickly unlocks and protects from accidental release. 9" Welding Clamp RAAT1A09: U-shaped jaws provide enhanced visibility and more working space. Holds work in proper alignment for use in welding applications or for holding awkward shapes in place. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. 8" Sheet Metal Clamp RAAV1A08: Makes bending, forming, and crimping jobs easier Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use Constructed of high-grade heat-treated alloy steel for maximum toughness and durability Guarded release trigger quickly unlocks and protects from accidental release. 44 Automotive

Toptul Hand Tools HAND TOOLS Door Upholstery Trim Pad Remover RAAE0812: Eases the removal of plastic fastenings and trim. Non-slip handle made from PP + TPR resins. 3-Piece Stainless Steel Bolstered Scraper Set RGAT0302 : Contents:- Size 50mm T: 1.85mm L230mm Size 32mm T: 1.85mm L230mm Size 32mm T: 1.85mm L230mm Magnetic Pick Up Tool Flexible Handle RJAD0512: Flexible shaft bends and holds shape, ideal for retreiving dropped nuts, bolts, etc from hard to reach angles and around obstructions. For up to date information and prices please visit our web site - www.redashe.co.uk 4-Piece Miniature Hook & Picks Set RAAR0401: Each hook pick & Scribe is made of Stainless Steel. Soft Grip handle providing comfort and control while resisting most workshop solvent. Used for installing and removing O-rings, seals and washers, making holes in leather and fabric, scraping difficult areas, aligning and scribing. Contents:- Mini hook, mini awl, mini bent tip 90, Mini bent tip 45. NEW Automotive 45

Economy Top Loading Parts Cleaners JRT700-900-1150 n Compact Design n 100% Stainless Steel n Stainless Steel Heating Element n Stainless Steel Spray Bars with Brass Nozzles n Rotating component basket n Ventilation Point n Temperatures from 30 to 65 Celsius n Adjustable Cleaning time 0 30 Min. n Level Control for liquid to protect pump and heating elements against low liquid level. n Manufactured in accordance with the CE Machinery Directive For non flammable cleaning solutions only For up to date information and prices please visit our web site - www.redashe.co.uk Model Reference Max. Load Tank Pump Flow Heater Internal Dim. (diameter x height) External Dim. (D x W x H) JRT700 100 kg 100 ltr 100 l/min - 2,4 Bar 9 kw Ø690 x 450mm 850 x 1000 x 980mm JRT900 200 kg 250 ltr 250 l/min - 3,6 Bar 9/12 kw Ø890 x 500mm 1300 x 1300 x 1150 mm JRT1150 300 kg 400 ltr 280 l/min - 4,0 Bar 9/18 kw Ø1140 x 700mm 1750 x 1550 x 1400mm Parts Cleaners JDT700 / JDT800 Redashe Parts Cleaners have always been designed with current and future legislation in mind. The latest machines have been constructed for use with aqueous cleaning solutions making them very environmentally and user friendly, our machines are suitable for use in many industries including Automotive, Aerospace and Rapid Prototyping Design. The machines are fully automatic and suitable for all types of components and non-flammable cleaning solutions. Constructed from stainless steel throughout and incorporating a digital temperature display and soft touch control panel as standard. A modified version for use with TPM type fluids is available. n Excellent pump performance. n Adjustable temperature up to 90 C. n Digital temperature display. n Suitable for environmentally friendly alkaline detergents. n Stainless steel construction. n Safety cut off circuit (shuts down operation when the door is opened). n Stainless seel filter 0.25 mm (to retain large debris and small parts). n Floor level drainage point. n Energy and noise reduction insulation (30 mm Styropor. n Fluid level indicator combining alarm n CE marked. n Soft Touch VISION 2000 control pad for washing programs: 5 min, 15 min, 30 min, continuous (all programs can be interrupted at any time). Model Inside Dim s Diameter x H Max. Charge Weight For non flammable cleaning solutions only. Pump Tank Heaters Power Outside Dim s H x W x D JDT700 ø70 x 45cm 100kg 100 l/min 100l 9 kw 102 x 106 x 80cm JDT800 ø80 x 50cm 150kg 140 l/min 150l 9 kw 102 x 106 x 80cm 46 Automotive

Parts Cleaners JDF700 / JDF900 / JDF1300 /JDF2000 Redashe Parts Cleaners have always been designed with current and future legislation in mind. The two latest machines have been constructed for use with aqueous cleaning solutions making them very environmentally and user friendly, our machines are suitable for use in many industries including Automotive, Aerospace and Rapid Prototyping Design. The machines are fully automatic and suitable for all types of components and non-flammable cleaning solutions. Constructed from stainless steel throughout and incorporating a digital temperature display and soft touch control panel as standard. A modified version for use with TPM type fluids is available. n Excellent pump performance n Adjustable temperature up to 90 C n Digital temperature display n Suitable for environmentally friendly alkaline detergents n Stainless steel construction n Vertical sliding pneumatic door n Safety cut off circuit (shuts down operation when the door is opened) n Stainless seel filter 0.25 mm (to retain large debris and small parts) n Floor level drainage point n CE marked n Energy and noise reduction insulation (30 mm Styropor n Fluid level indicator combining alarm n Soft Touch VISION 2000 control pad for washing programs: 5 min, 15 min, 30 min, continuous (all programs can be interrupted at any time) n A modified version for use with TPM type fluids is available. Model Inside Dim s Diameter x H Max. Charge Weight Pump Tank Heaters Power Outside Dim s H x W x D cm JDF700 ø70cm 150kg 140 l/min 200l 9 kw 230 x 122 x 92 JDF900 ø90cm 300kg 230 l/min 400l 9 kw 263 x 140 x 119 JDF1300 ø130cm 500kg 350 l/min 600l 18 kw 355 x 188 x 158 JDF2000 ø200cm 2500kg 700 l/min 1500l 36 kw 450 x 280 x 250 For non flammable cleaning solutions only. Automotive 47

Redashe Tool Balancers FOR TOOLS AND WEIGHTS FROM 0.4 180 KGS A complete range of balancers; capacities from 0.4 to 180kg, available stroke up to 3m. To eliminate labour, to cut down idle times, to improve work quality, to reduce hose and cable wear, to avoid both damage to people and tools. For either bench or assembly line jobs, applications ranging from small tools to industrial guns and multiple screwdrivers. Special applications on demand. n Stainless steel cable n Auxiliary safety suspension n Adjustable stroke limiting device n Cable guide in antifriction material n Inert spring drum assembly n (Models 1 to 4) Rugged construction, cast aluminium body n (Models 5 to 10) Ribbed and sealed monoblock construction in aluminium alloy n (Models 1 to 4) Adjustable capacity n (Models 5 to 10) Adjustable capacity by means of a worm screw n (Models 2 to 10) Safety device against load dropping due to spring breakage (>3kg) n (Models 4 to 10) Upper rotary suspension with safety hook n (Models 6 to 10) Locking device to block the load at any height n (Models 5 to 10) Taper drum rotating on ball bearings n (Models 5 to 10) Rotary upper hook with ball bearing n (Models 8 to 10) Lining up upper hook n (Models 8 to 10) Visible cable for inspection n (Models 1 to 7) Polyamides thimble ON REQUEST: n (Models 6 to 10) Locking/unlocking device with control from the floor n (Models 6 to 10) Rotary and insulating device For up to date information and prices please visit our web site - www.redashe.co.uk 1 2 3 4 1600mm 2000mm 2500mm 2500mm 0.4-3 kg 1-8 kg 2-14 kg 2-10 kg 48 Automotive

Redashe Tool Balancers FOR TOOLS AND WEIGHTS FROM 0.4 180 KGS 5 6 7 2000mm 2000mm 2000mm 4-25 kg 10-75 kg 75-105 kg 8 9 10 2500mm 3000mm 2500mm 3000mm 2500mm 3000mm 15-60 kg 35-100 kg 100-180 kg Automotive 49

Redashe Tool Balancers FOR TOOLS AND WEIGHTS FROM 0.4 180 KGS Model Picture No. Dimensions H x W x D Weight kg s Load kg s Stroke mm 9311 1 263 x 109 x 55 0.6 0.4-1 1600 9312 1 263 x 109 x 55 0.6 1-2 1600 9313 1 263 x 109 x 55 0.7 2-3 1600 9320 2 281 x 149 x 85 2 1-2.5 2000 9321 2 281 x 149 x 85 2 2-4 2000 9322 2 281 x 149 x 85 2.3 4-6 2000 9323 2 281 x 149 x 85 2.5 6-8 2000 9336 3 345 x 180 x 86 2.9 2-4 2500 9337 3 345 x 180 x 86 3.2 4-6 2500 9338 3 345 x 180 x 86 3.5 6-8 2500 9339 3 345 x 180 x 86 3.7 8-10 2500 9340 3 345 x 180 x 86 4 10-14 2500 9346 4 345 x 180 x 86 3 2-4 2500 9347 4 345 x 180 x 86 3.3 4-6 2500 9348 4 345 x 180 x 86 3.6 6-8 2500 9349 4 345 x 180 x 86 3.8 8-10 2500 9354 5 476 x 196 x 140 5 4-7 2000 9355 5 476 x 196 x 140 5.5 7-10 2000 9356 5 476 x 196 x 140 5.5 10-14 2000 9357 5 476 x 196 x 140 6.5 14-18 2000 9358 5 476 x 196 x 140 6 18-22 2000 9359 5 476 x 196 x 140 6.6 22-25 2000 9361 6 620 x 240 x 215 10.3 10-15 2000 9362 6 620 x 240 x 215 10.6 15-20 2000 9363 6 620 x 240 x 215 11.2 20-25 2000 9364 6 620 x 240 x 215 11.5 25-30 2000 9365 6 620 x 240 x 215 11.8 30-35 2000 9366 6 620 x 240 x 215 12.4 35-45 2000 9367 6 620 x 240 x 215 12.5 45-55 2000 9368 6 620 x 240 x 215 13.6 55-65 2000 9369 6 620 x 240 x 215 14.5 65-75 2000 9370 7 620 x 240 x 250 17.3 75-90 2000 9371 7 620 x 240 x 250 18 90-105 2000 9401 8 700 x 290 x 220 19 15-20 2500 9402 8 700 x 290 x 220 19.8 20-30 2500 9403 8 700 x 290 x 220 20.8 30-40 2500 9404 8 700 x 290 x 220 23.9 40-50 2500 9405 8 700 x 290 x 220 25.4 50-60 2500 9411 9 700 x 290 x 270 26.8 60-70 2500 9412 9 700 x 290 x 270 27.8 70-80 2500 9413 9 700 x 290 x 270 28.8 80-90 2500 9414 9 700 x 290 x 270 30 90-100 2500 9422 10 700 x 290 x 355 38.7 100-120 2500 9423 10 700 x 290 x 355 41.8 120-140 2500 9424 10 700 x 290 x 355 44.5 130-150 2500 9425 10 700 x 290 x 355 48 140-160 2500 9426 10 700 x 290 x 355 49 160-180 2500 9431 8 700 x 290 x 220 19.1 15-20 3000 9432 8 700 x 290 x 220 19.9 20-25 3000 9433 8 700 x 290 x 220 20.9 25-35 3000 9434 9 700 x 290 x 270 23.8 35-45 3000 9435 9 700 x 290 x 270 23.9 40-50 3000 9436 9 700 x 290 x 270 25.3 50-60 3000 9441 9 700 x 290 x 270 27 60-70 3000 9442 9 700 x 290 x 270 28 70-80 3000 9443 9 700 x 290 x 270 29 80-90 3000 9444 9 700 x 290 x 270 29 80-100 3000 9451 10 700 x 290 x 355 39.7 100-115 3000 9452 10 700 x 290 x 355 39.9 115-130 3000 9453 10 700 x 290 x 355 42.8 130-140 3000 9454 10 700 x 290 x 355 45.6 140-150 3000 9455 10 700 x 290 x 355 49 150-160 3000 9456 10 700 x 290 x 355 50 160-180 3000 If you need help in choosing the right Tool Balancer for your application, please call and ask to talk to a Redashe representive H W D 50 Automotive