wandsworth hygiene collection

wandsworth hygiene collection

For more information Tel: 01483 713400 Email: info@wandsworthgroup.com www.wandsworthgroup.com

contents 03 contents p age 04 hand dryers 09 combi units 10 water macerators 11 mistral 50 air freshener 12 technical specifications The Wandsworth range of hygiene products has been designed and engineered to give complete reliability in the washroom environment. The range includes high speed quick dry energy saving units along with robust heavy duty units. The hand and face dryers have the benefit of economically giving a fast, clean, warm air dry from a compact, and in most cases vandal resistant, reliable unit. The range of macerators provides a hygienic method of disposal of sanitary towels, eliminating waste immediately, effortlessly and safely. The combi units offer the choice of warm air hand drying or the use of paper towels in a choice of stainless steel or white finish. Hand Dryers and Water Macerators are designed to meet the requirements of BS EN 60335. The Mistral 50 Ozone generator is designed to remove bacteria and odours leaving clean, fresh air. For use in Toilets, Kitchens, in fact any area suffering from strong odours, ozone generators lock on to and kill bacteria causing the problem. The Company Policy is one of continuous improvement and the right to change designs, dimensions, descriptive matter, etc., at any time without notice is reserved. Many Wandsworth patterns and designs are protected by patents and Wandsworth is a registered Trade Mark. Full details will be provided on genuine enquiry and no infringement will be permitted. Certificate number FM 10069

04 hand dryers hand dryers Hand and face dryers eliminate the need for either paper towels or roller linen towels and the ensuing untidiness and running out just when most needed. Washrooms are tidier and more hygienic. Employees and customers are delighted with the convenience and the fast drying under 30 seconds. Dryers save the labour needed to refill paper and linen towel dispensers. They require no cupboard space to store towels. It has been established that hot air dryers are 60% cheaper to use than both linen and paper towels. Installation of all Wandsworth dryers is straightforward. It is recommended that a concealed electrical supply enters the rear of the cabinets. The cable entry is always right side rear or right side bottom. Each machine is supplied with full instructions, and can be made for any power supply required. HD200 The HD200 range of Hand dryers combines high speed drying with energy savings. Offered in a choice of three finishes, White, Satin Stainless Steel and Bright Stainless Steel these units have a drying time of approximately 10 12 seconds. A red LED display on the front of the unit shows it is operational and this light turns to green when the unit is in use. A further blue LED light underneath the unit shows the best position for optimal hand drying. Combined with a motor and element that can be adjusted from 450 900 Watts the HD200 range offers energy efficiency with fast hand drying. Power Supply: 220 240v, 50Hz Element Rating: 450 900 Watts adjustable Net Weight: 5.8Kg Noise Level: 72dBA at 1 Meter Dimensions: H 277mm W 201mm D 175mm For more information Tel: 01483 713400 Email: info@wandsworthgroup.com www.wandsworthgroup.com

hand dryers 05 HD1/T HD2 HD3 The Bunnie HD1/T machine is very efficient. The warm air can be directed to the hands or face by operating the diverter flap. Push button operation with automatic cut-out after 30 seconds. The unit is compact and simple in shape for easy cleaning. The HD1/T unit is robust and vandal resistant, therefore particularly suitable for high use public and unsupervised areas. The spring loaded button cannot be over pressed it moves only 3mm and because of the element positioning no electrical parts are accessible without removing two socket head bolts positioned to prevent unauthorized removal of the housing. The HD2 Bunnie automatic hand dryer has an attractive, robust & durable slimline moulded case. The machine starts when hands are placed beneath the warm air outlet, and stops when the hands are withdrawn making it even cheaper to run than predetermined cycles. Electronics distinguish static objects placed under the dryer, to ensure that the machine cannot run continuously, for more than 60 seconds. The economical motor runs at a surprisingly low noise level. All of these factors make the unit ideal for kitchens, offices, washrooms, hospitals, schools, food shops, etc. HD3 automatic hand dryer has a stainless steel cover. The machine starts when hands are placed beneath the warm air outlet, and stops when the hands are withdrawn making it even cheaper to run than predetermined cycles. Electronics distinguish static objects placed under the dryer, to ensure that the machine cannot run continuously, for more than 60 seconds. An auto resetting thermal overload protects against overheating and solid-state timing ensures extreme reliability. Power Supply: 240v, 50/60Hz Element Rating: 2.4kW Net Weight: 5.5Kg Noise Level: 74dBA at 1 Meter Dimensions: H 264mm W 275mm D 177mm Power Supply: 230v, 50Hz Element Rating: 2.0kW Net Weight: 2Kg Noise Level: 65dBA at 1 Meter Dimensions: H 270mm W 264mm D 143mm The economical motor runs at a surprisingly low noise level. All of these factors make the unit ideal for kitchens, offices, washrooms, hospitals, schools, food shops, etc. Power Supply: 230v, 50Hz Element Rating: 2.0kW Net Weight: 4Kg Noise Level: 65dBA at 1 Meter Dimensions: H 280mm W 270mm D 150mm

06 hand dryers change the way you dry HD5/T HD8 The Bunnie HD8 automatic hand dryer has a similar technical specification to the HD5/T, but the HD8 is hands only. The stainless steel casing makes it a popular choice for catering and public areas. Power Supply: 230v, 50/60Hz Element Rating: 2.4kW Net Weight: 5.8Kg Noise Level: 74dBA at 1 Meter Dimensions: H 277mm W 268mm D 176mm The Bunnie automatic hand and face dryer is built for rugged conditions, but with the sophisticated hands off operation. This model has a technical specification similar to the HD1/T heating air which can be comfortably directed at hands or face. Operation is by an infra-red sensor which starts and stops automatically* and a safety cut-out ensures that objects placed beneath the machine accidentally or mischievously will not run the dryer longer than 80 seconds. * When hands are placed beneath the warm air outlet. Power Supply: 230v, 50/60Hz Element Rating: 2.4kW Net Weight: 5.5Kg Noise Level: 74dBA at 1 Meter Dimensions: H 264mm W 275mm D 177mm For more information Tel: 01483 713400 Email: info@wandsworthgroup.com www.wandsworthgroup.com

hand dryers 07 HD9 HD10 The HD9 Bunnie automatic hand dryer has an attractive, slimline ABS moulded case. The machine starts when hands are placed beneath the warm air outlet, and stops when the hands are withdrawn making it more economical to run than predetermined cycles. Electronics distinguish static objects placed under the dryer, to ensure that the machine cannot run continuously, for more than 60 seconds. The economical motor runs at a very low noise level which make it an ideal choice for kitchens, offices, schools, hospitals etc. The HD10 model hand dryer has an ABS cover with a 1.5kW element. This unit is suitable where safety, economy, convenience & hygiene are of prime importance. The machine starts when hands are placed beneath the warm air outlet, and stops when the hands are withdrawn. There is a safety cut-out to ensure that the machine cannot run continuously for more than 60 seconds. Power Supply: 230v, 50Hz Element Rating: 1.75kW Net Weight: 2.9Kg Noise Level: 60dBA Dimensions: H 280mm W 275mm D 143mm Power Supply: 220 240v, 50Hz Element Rating: 1.5kW Net Weight: 3.3Kg Noise Level: 56dBA at 1 Meter Dimensions: H 275mm W 225mm D 160mm HD11 The HD11 model hand dryer has a 1.9kW element and an aluminium cover with a painted white gloss finish. The unit offers quiet operation with good performance. This is also a no touch model with a safety cut-out to ensure operation cannot continue for more than 1 minute. Electronics distinguish static objects placed under the dryer to ensure that the machine cannot run continuously. Power Supply: 220 240v, 50Hz Element Rating: 1.9kW Net Weight: 4.3Kg Noise Level: 69dBA at 1 Meter Dimensions: H 275mm W 225mm D 160mm

08 hand dryers HD12 HD13/ HD14 Finished in White porcelain coated enamel, this manual/push button version has both a Chrome plated nozzle and push button. It offers a drying time of approximately 26 seconds and has a robust 2mm thick steel cover. This automatic version is available in both white coated enamel (Model HD13) and a Bright Chrome Plated (Model HD14) finish. The nozzle has a chrome plated finish and both units offer a drying time of approximately 26 seconds. Power Supply: 220 240v, 50Hz Element Rating: 2.4kW Net Weight: 7Kg Noise Level: 73Dba at 1 Meter Dimensions: H 248mm W 284mm D 202mm For more information Tel: 01483 713400 Email: info@wandsworthgroup.com www.wandsworthgroup.com

combi units combi units 09 bunnie combi BC1/2 * bunnie combi BC3 * bunnie BC4 * flush hand dryer BC1 The flush mounted model of the Combined Towel Dispenser, Warm Air Dryer and used Towel Receptacle provides all facilities for drying hands in the washroom. The attractive one piece front panel is hinged on the right side and secured by two locks, overlapping the back box by 25mm all round. The back box has a depth of 133mm. The paper Towel Dispenser will hold up to 400 C fold towels with a width of up to 230mm. Access to the used Towel Receptacle is via a hinged flap which gives protection against contact with soiled towels. BC2 This surface mounted model is to the same specification as the BC1, but with a non overlapping front panel and a matching back box with a depth of 150mm. The BC3 has a Paper Towel Dispenser and Warm Air Dryer for areas with restricted wall space and the availability of separate waste disposal facilities. Other aspects are as the BC1, but with a height of only 1000mm. Power Supply: Element Rating: Net Weight: Noise Level: Dimensions: 230v, 50Hz 2.0kW 26Kg 65dBA at 1 Meter H 1000mm W 450mm D 150mm The BC4 is a warm air hand dryer only flush mounting, styled to match the Bunnie Combi family of products. Power Supply: Element Rating: Net Weight: Noise Level: Dimensions: 230v, 50Hz 2.0kW 12.5Kg 65dBA at 1 Meter H 600mm W 450mm D 150mm Power Supply: Element Rating: Net Weight: Noise Level: Dimensions: 230v, 50Hz 2.0kW 35Kg 65dBA at 1 Meter H 1500mm W 450mm D 150mm * All products in the Combi range are available in stainless steel or white finish as standard. Other finishes are available to special order.

10 water macerators water macerators Water Bunnie macerators dispose of sanitary towels, paper towels and similar waste products of small cotton wool or wadding construction by grinding them into minute particles which are flushed into the waste drains by water. Each machine caters for establishments with up to 250 staff. Fed by mains water, or a storage tank, they are actuated by lifting the access flap and inserting the towel. A 90 second cycle commences on closing the flap which starts the water flow and the grinding action. Disposal is usually effected in 25 seconds, the remaining time is for cleaning down the machine. Opening the flap during a cycle automatically stops the machine and on closing again a new cycle commences to ensure complete maceration. The machine stops if the access flap is opened or the cover removed and a thermal overload safeguards against the rare occurrence of overloading. water bunnie 500 water bunnie 701 A compact wall mounted unit with white epoxy polyester powder coated steel cabinet and strong glass reinforced plastic top. Access to the integral parts of the machine is gained by removing the front panel which is secured by a cylinder lock. This model has all the technical features of the Water Bunnie 500 with the added facility of flush mounting. Front panels are fixed by vandal resistant, yet quickly released, fasteners. All the mechanical parts are housed integrally. For more information Tel: 01483 713400 Email: info@wandsworthgroup.com www.wandsworthgroup.com

wandsworth mistral 50 mistral 50 11 The new Mistral 50 harnesses the all natural properties of ozone to completely destroy all smells and odours, leaving the air fresh and clean and pure. The Mistral 50 emits a steady flow of ozone into the surrounding air, killing all odour-making bacteria as it finds it. It breaks down all organic and chemical odours, from food, smoke and even solvent fumes. There is no need for harsh chemical scents to be pumped out into the room and no need for replacement cartridges or filters. Air drawn in Ozone blown out Standard room height of 2.4 metres = coverage of 8m 2 of floor per unit So how does it work? When Oxygen is activated with electricity, it naturally produces ozone. The ozone is then pumped out through the unit which disperses throughout the room, locking onto any bacteria and killing it. Only ozone kills bacteria, viruses, and mould thereby removing the source of the odours, not just covering them up. Ozone also removes smoke, and smoke odours. Is it safe to use? Absolutely! Ozone is the safest and most natural purification agent. The Mistral only produces safe, low levels of ozone, which are naturally all around us, and are safe to breathe. What are the running costs? The Mistral 50 uses less electricity than a 40 watt light bulb. There are no consumables to replace and therefore no additional running costs or wastage. What about the ozone layer? In recent years it has become increasingly evident that the continuing pollution of the environment could endanger the quality of life of future generations. Governments and other organisations in many countries are now more aware of the impact of past ignorance regarding environmental matters and increasingly have become more environmentally sensitive. Businesses and individuals in the construction and services industries are under increasing pressure to improve their environmental policies. Since ozone is made up entirely of oxygen, it can only revert back to natural, non-toxic oxygen once the ozonation process is completed. The Mistral 50 is very environmentally friendly and keeps your carbon footprint to a minimum. Unit Diameter: 190mm Unit Depth: 75mm Weight: 950g Power Consumption: Less than 1 amp Fan Voltage: 12v

12 technical specifications technical specifications water macerators Water Macerators Bunnie 500 Bunnie 701 Power supply 220/240 volts, 220/240 volts, 50Hz 50Hz Mounting Wall Wall: flush Finish Cabinet White epoxy Stainless steel Top: grey GRP Weight Nett: 26.5kg Nett: 30.5kg Gross: 30.3kg Gross: 34.3kg Height 700mm 780mm Width 380mm 410mm Depth 230mm 220mm construction All Water Bunnie macerators have the following features: Electrical supply to 13 amp connector block via rear conduit hole. Motor is 1/2 h.p. 1425 r.p.m., 50 cycles single phase, capacitor start continuously rated. Starting load of 888W. Grind rings are of special corrosion resistant steel which remains sharp for the life of the product. The closure is made in ABS and the chute is rubber for quiet operation. A siphon break of 25mm air gap avoids all possibility of back syphonage into the water supply. An automatic water regulator maintains an even flow of 7 litres (1 1/2 gallons) a minute during each operation ensuring complete cleaning. installation Direct connection to the mains supply or a header tank with a minimum head of 3.65 metres will ensure that a minimum of 5 p.s.i. is obtained. However, the head may be reduced to 2.0 metres by removing the flow washer in the solenoid. It is important that this washer MUST NOT be removed if the head is greater than 3.65 metres. A method of calculating the total flow in a system and other relevant advice will be supplied on request. A minimum fall of 1 in 20 must be allowed from the macerator to the waste pipe. Each machine has a 50mm (2") NB S trap fitted internally. WRAS water regulations advisory scheme The assessment panel of the WRAS finds that the use of these fittings when installed correctly will not contravene the requirements of the UK Water Regulations/Byelaws (Scotland). A reference to these fittings is included in the Water Fittings and Materials Directory. Certificate number 0610098. dimensions (mm) Fixing and supply locations shown in the drawings are the dimensioned positions of: a: conduit entry 20mm (3/4") OD b: water inlet 12mm (1/2") NB c: waste outlet 50mm (2") NB The mounting heights shown above are for guidance only and may be modified to suit installation conditions All dimensions in mm Water Bunnies can be used with filtered marine water. Water Bunnie 500 Water Bunnie 701 Water Byelaws Advisory Service certificate number 0610098.

technical specifications 13 combi units Combi Units BC1 BC2 BC3 BC4 Specification Hot air hand dryer Hot air hand dryer Hot air hand dryer Hot air hand dryer Heating element 2.0kW 2.0kW 2.0kW 2.0kW Motor 2700rpm, 2700rpm, 2700rpm, 2700rpm, brushless brushless brushless brushless 2 pole induction 2 pole induction 2 pole induction 2 pole induction motor motor motor motor Performance: Air per hour 50ºC 50ºC 50ºC 50ºC Temperature above ambient at 50mm from outlet Cycle time Flexible Flexible Flexible Flexible Noise level 65dBA at 1 metre 65dBA at 1 metre 65dBA at 1 metre 65dBA at 1 metre Power supply 230 volts, 50Hz 230 volts, 50Hz 230 volts, 50Hz 230 volts, 50Hz Air output 200 m 3 /hr 200 m 3 /hr 200 m 3 /hr 200 m 3 /hr Weight (approximate) 35kg nett 35kg nett 26kg nett 12.5kg nett mounting height For all the Combi models the mounting height is based on the distance from the warm air outlet of the hand drier to the floor which is recommended at 1200mm 1400mm. This is equivalent to the bottom of the front panel of the BC1 or BC2 being 350mm 550mm above floor level. For the BC3 and BC4 this measurement is 850mm 1050mm. These dimensions may be modified to suit installation conditions. dimensions (mm) installation All four Combi models are pre-drilled in the rear box for screw or bolt fixings. The location should be inspected for structural integrity and if in doubt consult a qualified engineer, surveyor or builder. Fixing holes are designed for M10 or 3/8" diameter fixings. cabinet The rear cabinet of the BC1 and the BC3 is made from mild steel and finished black stoved enamel. Waste receptacles are of black plastic coated wire mesh. The rear cabinet of the BC2 is made of stainless steel. Two keys are supplied with each lock. finish All four models utilise a heavier gauge stainless steel than most other models available. Each model is also available in a polyester powder paint finish white RAL 9010 90%. electrical (for the BC1, BC2 and BC3) BC1 BC2 BC3 BC4 The in-built Hand Dryer is automatic and is pre-wired to a terminal block via a microswitch. The microswitch prevents the Hand Dryer operating when the front panel is opened. Cable entry is via a 20mm knock out on the right side.

14 technical specifications technical specifications hand dryers Hand dryers HD1/T HD2 HD3 HD5/T HD8 HD9 Heating element 2.4kW 2.0kW 2.0kW 2.4kW 2.4kW 1.75kW Element mounting Inlet side of Outlet side Outlet side Inlet side of Inlet side of Outlet side the fan of the fan of the fan the fan the fan of fan Motor 5500rpm 2700rpm 2700rpm 5500rpm 5500rpm 2450rpm brushless 2 pole brushless 2 pole induction induction motor motor Performance 270 m 3 /hr 200 m 3 /hr 200 m 3 /hr 270 m 3 /hr 270 m 3 /hr 170 m 3 /hr Air per hour 28ºC 50ºC 50ºC 28ºC 28ºC 40ºC Temperature above ambient at50mm from outlet Cycle time 30 seconds Flexible Flexible Flexible Flexible Flexible Noise level 74dBA at 1 metre 65dBA at 1 metre 65dBA at 1 metre 74dBA at 1 metre 74dBA at 1 metre 60dBA at 1 metre Power supply 230V, 50/60Hz 230V, 50Hz 230V, 50Hz 230V, 50/60Hz 230V, 50/60Hz 230V, 50Hz Shock protection Earthed Double insulated Requires earthing Earthed Earthed Double insulated of exposed Class II metalwork Casing LM24 pressure die Acrylic capped, Stainless steel LM24 pressure die Stainless steel ABS cast aluminium, fire retardant cast aluminium, epoxy/polyester ABS epoxy/polyester powder coated powder coated Operating Push button Infra-red Infra-red Infra-red Infra-red Infra-red operation automatic automatic automatic automatic automatic with automatic sensing system sensing system sensing system sensing system sensing system cut-out with safety with safety with safety with safety with safety cut-out cut-out cut-out cut-out cut-out Weight Packed 6.0kg Packed 2.5kg Packed 4.5kg Packed 6.0kg Packed 6.4kg Packed 3.3kg (approximate) Unpacked 5.5kg Unpacked 2kg Unpacked 4kg Unpacked 5.5kg Unpacked 5.8kg Unpacked 2.9kg Height 264mm 270mm 280mm 264mm 277mm 280mm Width 275mm 264mm 270mm 275mm 268mm 275mm Depth 177mm 143mm 150mm 177mm 176mm 143mm Mounting height 1200mm 1200mm 1200mm 1200mm 1200mm 1200mm 1400mm 1400mm 1400mm 1400mm 1400mm 1400mm from floor to from floor to from floor to from floor to from floor to from floor to base of unit base of unit base of unit base of unit base of unit base of unit For more information Tel: 01483 713400 Email: info@wandsworthgroup.com www.wandsworthgroup.com

technical specifications 15 Hand dryers HD10 HD11 HD12 HD13/14 HD200/White HD200/BC & /SC Heating element 1.5kW 1.9kW 2.4kW 2.4kW 1.6kW 1.6W Element mounting Outlet side of Outlet side Outlet side Outlet side Outlet side Outlet side the fan of the fan of the fan of the fan of the fan of the fan Motor 2850rpm 4200rpm 5500rpm 5500rpm 18000rpm 18000rpm induction brushed brushed brushed universal Performance 110m 3 /hr 153m 3 /hr 345m 3 /hr 345m 3 /hr 116m 3 /hr 116m 3 /hr Air per hour 36ºC 37ºC 33ºC 33ºC 25ºC 25ºC Temperature above ambient at 50mm from outlet Cycle time Flexible Flexible Flexible Flexible Flexible Flexible Noise level 56dBA at 1 metre 65dBA at 1 metre 73dBA at 1 metre 73dBA at 1 metre 78dBA at 1 metre 78dBA at 1 metre Power supply 220-240V, 50Hz 220-240v, 50Hz 220-240v, 50Hz 220-240v, 50Hz 220-240v, 50Hz 220-240v, 50Hz Shock protection Earthed, Class 1 Earthed, Class 1 Earthed, Class 1 Earthed, Class 1 Earthed, Class 1 Earthed, Class 1 Casing ABS Die case Steel/Enamel Steel/Enamel Steel/Enamel Stainless Steel aluminium Coating Coating (HD13) Coating (HD200SC) Steel/Chrome Polished Stainless Plated (HD14) Steel (HD200/BC) Operating Infra-red Infra-red Push button Infra-red Infra-red Infra-red automatic automatic operation automatic automatic automatic sensing system sensing system with automatic sensing system sensing system sensing system with safety with safety cut-out with safety with safety with safety cut-out cut-out cut-out cut-out cut-out Weight Packed 3.65kg Packed 4.65kg Packed 7.5kg Packed 7.5kg Packed 6.6kg Packed 6.6kg (approximate) Unpacked 3.3kg Unpacked 4.3kg Unpacked 7kg Unpacked 7kg Unpacked 5.8kg Unpacked 5.8kg Height 225mm 225mm 248mm 248mm 277mm 277mm Width 275mm 275mm 284mm 284mm 201mm 201mm Depth 160mm 160mm 202mm 202mm 175mm 175mm Mounting height 1200mm 1200mm 1200mm 1200mm 1200mm 1200mm 1400mm 1400mm 1400mm 1400mm 1400mm 1400mm from floor to from floor to from floor to from floor to from floor to from floor to base of unit base of unit base of unit base of unit base of unit base of unit

other products from wandsworth Electrical wiring accessories IPiN IP nursecall systems & digital DCS nursecall systems Tele-call bedside computing & patient entertainment systems Disabled refuge & WC alarm systems Wireless nursecall systems Paging & DECT solutions Security products Head Office Wandsworth Group Limited Albert Drive Sheerwater Woking Surrey GU21 5SE Tel: +44 (0)1483 713400 Fax: +44 (0)1483 740384 Northern Ireland Reay Thompson Limited 8 Lorne Street Belfast BT9 7UD Tel: +44 (0)28 9066 4411 Fax: +44 (0)28 9066 4831 Email: info@wandsworthgroup.com Web: www.wandsworthgroup.com AA435 Producer Registration Number: WEE/HA0115XU A British Manufacturer