Air Handling Unit Airblock FG

Air Handling Unit Airblock FG

Twice as powerful with Twin technology Twin technology helps to ensure optimised air flow and excellent power density from such a shallow design. The modular system concept reduces noise above all in the low frequencies and thus aids the pleasing perception of noise. As the fans lie adjacent to each other, the Airblock FG can be used in low suspended ceiling, enabling you to plan with ample space, thanks to high ceilings.

Twice as powerful The Airblock FG is twice as powerful with Twin technology and FlowGrid. Twin technology (models 7 + 9) helps to ensure optimised air flow and excellent power density from such a shallow design. Enjoy lower noise emissions, thanks to the low-turbulence laminar air flow, producing the same air volume, with the innovative FlowGrid pre-grille. 1 I 6

Flexible, flat, fantastic! The Airblock FG comes into it s own where other units meet their limits! It s shallow height and space-saving design enable the units to be installed in a number of different ways, even when space is at a premium. The units can be installed unobtrusively with their own accessories in suspended ceilings, basements or adjacent rooms. 2 I 6

Saves energy Discover the energy efficiency of the Airblock FG thanks to use of EC technology. Save valuable energy with the Airblock FG, as a result of the high level of heat recovery of the heat exchanger module. The ErP-compliant slim-line unit for heating, cooling and ventilation meets the requirements of the Oekodesign Directive (ErP). 3 I 6

The all-rounder...... for decentralised and dynamic air handling! The Airblock FG is suitable for almost any installation project: whether in commercial buildings, hotels, supermarkets etc. Its strengths lie, above all, in the demand-led heating, ventilation and cooling of rooms used intermittently, such as meeting rooms. 4 I 6

Simply modular The Airblock FG is available in a range of different models. Almost any feasible application can be configured with an air volume of 250 to 7500 m³/h. The modular system and comprehensive range offered by the Airblock FG enable it to be used in all kinds of rooms small and large. 5 I 6

Perfectly controlled The Airblock FG is available with the fully automatic KaControl or can be networked to an existing BMS. 6 I 6

Airblock FG at a glance Heat recovery module Supply air module Filter Filter Outdoor air bypass flap Cross-flow plate heat exchanger Service hatch EC fan FlowGrid LPHW heat exchanger

Cross-flow plate heat exchanger } cross-flow plate heat exchanger for over 90 % heat recovery } simple and flexible inspection and/or replacement from above or below by the use of several practical modules 1 I 6

EC fan } EC fan unit with fan directly driven by high-performance radial impeller } fan can be operated continuously and in an energy-saving manner without frequency inverter } ModBus interface (models 8 + 9) permits intelligent motor management (standard with KaControl) 2 I 6

Outdoor air bypass flap } low-cost night cooling in summer with simultaneous closure of the heat exchanger air guide } freezing protection of the heat exchanger in winter } mode and supply air temperature control in spring and autumn without reheating 3 I 6

FlowGrid } innovative pre-grille for optimum air flow from the fans } significantly reduces disturbing turbulence and peaks of blade passing noise 4 I 6

Service hatch } generously sized access panels permit maintenance of the components from below. The heat recovery module and chiller modules can also be serviced from above 5 I 6

Filter } compact filter insert within a fibre plastic frame } complies with the requirements of VDI 6022 } filter grade: M5 for exhaust air and F7 for supply air as per DIN EN 779 } filter can be removed from above and below (on heat exchanger module) 6 I 6

KaControl fresh air panel The KaControl fresh air panel provides an all-purpose control solution for Airblock FG, as a recirculation air or fresh air system, optionally combined with exhaust air function and heat recovery. Combined with staff training and functional tests by the Kampmann Customers Service team, energy-efficient operation with maximum comfort is guaranteed. Alternative electromechanical control accessories are also available.

Supply air module Exhaust air module Model BG 6 BG 7 BG 8 BG 9 Ext. pressure Air volume 1) Air velocity Heat output 2) Ext. pressure Air volume Air velocity [Pa] [m³/h] [m/s] [kw] [Pa] [m³/h] [m/s] 100 230 0,3 3,3 100 330 0,4 150 250 0,3 3,5 150 340 0,4 200 700 0,9 7,6 200 860 1,1 250 1080 1,4 10,3 250 1250 1,6 100 360 0,4 5,0 100 630 0,6 150 400 0,4 5,5 150 650 0,7 200 1180 1,2 12,0 200 1640 1,7 250 1890 1,9 16,4 250 2430 2,4 100 660 0,5 8,7 100 940 0,7 150 1130 0,9 12,9 150 1540 1,2 200 2250 1,7 20,6 200 2680 2,1 250 3260 2,5 26,0 250 3690 2,8 100 980 0,6 12,4 100 1740 1,1 150 1800 1,1 19,4 150 2780 1,7 200 3590 2,2 30,6 200 4990 3,1 250 5320 3,3 38,7 250 6950 4,3 1) includes LPHW heat exchanger and F7 filter 2) at LPHW 75/65 C, t L1 = 20 C Details Control Dimensions

Dimensions Supply air module Exhaust air module Model Length L Width B Height H Length L Width B Height H [mm] [mm] [mm] [mm] [mm] [mm] BG 6 1000 740 390 600 740 390 BG 7 1000 940 390 600 940 390 BG 8 1100 940 490 700 940 490 BG 9 1100 1140 490 700 1140 490 Top view Cross-section Top view Cross-section Details Control Dimensions

Kampmann offers you the following service benefits: on-site consultation Benefits for you! diverse sampling performance design detailed discussions After Sales Service Find your contact person here: Kampmann.co.uk/contact 1 I 2 Details Control Dimensions

Best solutions. Best support. Kampmann.co.uk Kampmann GmbH Friedrich-Ebert-Str. 128 130 49811 Lingen (Ems) Germany Kampmann UK Ltd. Dial House, Govett Avenue Shepperton, Middlesex, TW17 8AG Great Britain T + 49 591 7108-0 F + 49 591 7108-300 E info@kampmann.de W Kampmann.de T +44 1932 228592 F +44 1932 228949 E info@kampmann.co.uk W Kampmann.co.uk 2 I 2 Details Control Dimensions