CEN/TC 442 WG4 TG2 Product Data Templates. based on CEN/CENELEC standards, stored in a European data dictionary framework

Similar documents
CEN/TC 442. Building Information Modelling SMART CE MARKING KICK-OF MEETING BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442

CEN/TC 442. Building Information Modelling REPORT TO ACE BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442

ISO/IEC and CEN standardization activities + buildingsmart

The future of the CPR, is CE marking changing? 26/10/2018

THE CONSTRUCTION PRODUCTS REGULATION CE marking is coming to the UK s builders merchants

1. Terms defined in the Construction Products Regulation (CPR)

BUSINESS PLAN CEN/TC 249 PLASTICS

System Solutions. Quick and simple to construct. Range of partitions. Fully warranted systems. CE Marked. Knauf CE Marking. A guide to CE marking

CEN/TC 442 Decisions taken /16

New EN Standard for Water meters Challenges for the market. Metering Europe 2005, Barçelona (E), September 2005

Contents EN :2006+A2:2016 (E)

Window and Door Standards for Performance and Security. Russell Day Senior Technical Officer Glass and Glazing Federation

The CPD - The View of the European Commission

BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY

CE marking of industrial doors under the CPR Michael Skelding, Secretary and General Manager Door and Hardware Federation

The standards of the European gas infrastructure. Main functional standards for maximum operating pressure over 16 bar

Firetect C. Fire protective products: Fire protective board

White paper. Construction Product Regulations* by Multimedia Connect. Which cables are concerned by these new regulations?

Üntel is ready for CPR

BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 72 FIRE DETECTION AND FIRE ALARM SYSTEMS EXECUTIVE SUMMARY

Frequently Asked Questions on the Construction Products Regulation (CPR) - Enterprise and Industry

EU MS Case study 4 : France

Guidance Note No 19/1. CE Marking windows and doorsets

ETICS & HARMONIZATION The challenges

The New Generationn of Firedoors

European Technical Assessment

CEN strategies and plans for a global acceptance of the Eurocodes

Co-ordination of the Group of Notified Bodies for the Construction Products /Regulation 305/2011/EU

Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations

BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS

EN :2012 EN :2012 ETAG 026 part 3:2011 DECLARATION OF PERFORMANCE. Sikasil -670 Fire

BUSINESS PLAN CEN/TC 124 TIMBER STRUCTURES EXECUTIVE SUMMARY

CEN-CENELEC response to the European Commission consultation on H2020 Societal Challenge 5 priorities for

Technical Bulletin CE marking: from 1st July 2013

NATURAL STONE PRODUCTS - MODULAR TILES - REQUIREMENTS IRISH STANDARD I.S. EN 12057:2004. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

cooperation in standardization Gonçalo Ascensão Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012

Transformasjonen fra en analog til en digital byggeindustri har startet

BUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY

Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -

EN Electrical Equipment of non-electric appliances for household and similiar purposes Safety requirements

BUSINESS PLAN CEN/TC 149 POWER-OPERATED WAREHOUSE EQUIPMENT EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY

EUROPEAN TECHNICAL ASSESSMENT

Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -

BUSINESS PLAN CEN/TC 143 MACHINE TOOLS - SAFETY EXECUTIVE SUMMARY

CONSTRUCTION PRODUCTS REGULATION MOLEX CES COPPER AND FIBRE CABLE

CEN/TC 151 N 800. N 800 CEN TC 396 Activity report. Date of document Expected action

For structural use in all types of construction works according to EN

buildingsmart Summit, Opening plenary session

This document is a preview generated by EVS

PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code

Regulation (EU) No 305/2011 laying down harmonised conditions for the marketing of construction products (EU CPR)

This document is a preview generated by EVS

BUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY

TC 155 TIMES. E-net doc. 2015/6392. May 2015 BRIEFING FOR BPF PIPES GROUP MEMBERS

EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE

BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS EXECUTIVE SUMMARY

CEN/TC 229 "Precast concrete products CEN/TC 229 N nd meeting of CEN/TC (Oslo) Draft agenda Revision 1

European Technical Assessment. ETA-08/0314 of 8 August General Part. Technical Assessment Body issuing the European Technical Assessment:

The Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles

Georgios Katsarakis European Commission

BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY

Global Elevator Industry. Christophe ISAAC CASTIAU

A Notification under Article 12 of Regulation (EU) No 1025/2012 1

BUSINESS PLAN. CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY

Timber in construction Eurocode 5 Span tables and guidelines

Certificate of constancy of performance

European Standardization for the Natural Gas Infrastructure

BUSINESS PLAN CEN/TC 125 MASONRY EXECUTIVE SUMMARY

The WWA Standard for manufacturing wood windows and window performance

Construction Products Directive

BSI the UK voice into European and national standards

Personal protective equipment - Test methods for footwear (ISO 20344:2011)

Implementing the Construction Products Regulation (EU) 305/2011

DECLARATION OF PERFORMANCE 1 N. For structural use in all types of construction works according to EN

WORK PACKAGE 4 DELIVERABLE D.T4.1.4

Role of Standards in Exploiting Technology and Research

Sýnishorn Specification for mortar for masonry - Part 2: Masonry mortar

BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY

ISO Series of Standards on Management System. Christian Levy Président french commission of standardisation

This document is a preview generated by EVS

BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY

Annex of the certificate (Page 1/7) Accreditation Scope

BUSINESS PLAN CEN/TC 132 ALUMINUM AND ALUMINIUM ALLOYS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES EXECUTIVE SUMMARY

European Technical ETA-07/0332 Assessment of 30 January 2015 General Part

European Technical ETA-06/0078 Assessment of 21 January 2015 General Part

Camping tents (ISO 5912:2011)

To the Members of CEN/TC 250 Structural Eurocodes

BUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 135 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES EXECUTIVE SUMMARY

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation

Belcom Cable excellence engineered through quality. CPR Construction Products Regulation

European Technical Assessment. ETA-11/0240 of 7 May English translation prepared by DIBt - Original version in German language.

European Technical Assessment. ETA-02/0020 of 11 December English translation prepared by DIBt - Original version in German language

Particle Tracking Analysis for particle counting

CEN System Delegated Decisions Dispatch 33:2016

This document is a preview generated by EVS

Transcription:

CEN/TC 442 WG4 TG2 Product Data Templates based on CEN/CENELEC standards, stored in a European data dictionary framework Lars Chr. Fredenlund, - CEO, cobuilder - Member buildingsmart International Product Room - Member of bsdd Advisory Board, cobuilder - Expert CEN/TC 442 WG4 - Chair Task Group 2 Product Data Templates - Member buildingsmart International Product Room - Chair buildingsmart International Product Data Template Working Group - Expert ISO/TC 59/SC13 WG11 - Committee member SN/K 257

CEN/TC 442 Building Information Modeling (BIM) Standardization in the field of structured semantic life-cycle information for the built environment.

CEN/TC 442 Working Group 1 - Strategy and Planning Working Group 2 - Exchange information Working Group 3 - Information Delivery Specification Working Group 4 - Support Data Dictionaries

CEN/TC 442 Working Group 1 - Strategy and Planning Working Group 2 - Exchange information Working Group 3 - Information Delivery Specification Working Group 4 - Support Data Dictionaries Task Group 1 (expert process) Task Group 2 (Product Data Template)

Doc 1 - General structure of a Product Data Template (PDT)

Doc 1 - General structure of a Product Data Template (PDT)

Doc 1 - General structure of a Product Data Template (PDT)

Doc 2 Framework for Product Data Templates under CPR

EN 13162 Stone wool insulation Thermal resistance Thermal resistance according to EN 12939 EN 12939 m².k/w Doc 2 Framework for Product Data Templates under CPR

EN 13162 Thermal resistance Stone wool insulation Thermal resistance Thermal resistance coefficient according to EN 12939 Thermal resistance coefficient according to EN 12667 EN 12939 Thermal resistance m².k/w EN 12667 Thermal resistance m².k/w Value Value Doc 2 Framework for Product Data Templates under CPR

Why Construction Products Regulation (CPR) and harmonised standards?

Construction Products Regulation (CPR) Lays down harmonised rules for the marketing of construction products in the EU Provides a common technical language to assess the performance of construction products Ensures reliable information is available to professionals, public authorities, and consumers, so they can compare the performance of products from different manufacturers in different countries

CPR - BASIC REQUIREMENTS FOR CONSTRUCTION WORKS 1. Mechanical resistance and stability 2. Safety in case of fire 3. Hygiene, health and the environment 4. Safety and accessibility in use 5. Protection against noise 6. Energy economy and heat retention 7. Sustainable use of natural resources

CPR - BASIC REQUIREMENTS FOR CONSTRUCTION WORKS 1. Mechanical resistance and stability 2. Safety in case of fire 3. Hygiene, health and the environment 4. Safety and accessibility in use 5. Protection against noise 6. Energy economy and heat retention 7. Sustainable use of natural resources Harmonised standards (CPR) Eurocodes National building regulations (Europe)

Construction Products Regulation (CPR) Harmonised standards

PDT creation process

CPR EN 13162 - thermal insulation products for buildings - factory made mineral wool (MW) products - specification Annex ZA Essential characteristics Thermal resistance EN 12939 ISO 12667 Reaction to fire EN 13501-1 Tensile strength EN 1607

CPR EN 13162 - thermal insulation products for buildings - factory made mineral wool (MW) products - specification Mineral wool Common European technical language Essential characteristics Thermal resistance EN 12939 ISO 12667 None-Essential characteristics Racking resistance EN 14608 Burglar resistance Reaction to fire EN 13501-1 Tensile strength EN 1607 EN 14351-1

Data dictionary based on EN ISO 12006-3

Window Essential characteristics Common European technical language in a data dictionary based on EN ISO 12006-3 Thermal transmittance EN ISO 10077-2 EN ISO 12567-2 Resistance to fire EN 13501-2 Watertightness EN 1027 None-Essential characteristics Racking resistance EN 14608 Burglar resistance EN 14351-1

Window Essential characteristics Common European technical language in a data dictionary based on EN ISO 12006-3 Thermal transmittance EN ISO 10077-2 EN ISO 12567-2 Resistance to fire EN 13501-2 Watertightness EN 1027 None-Essential characteristics Racking resistance EN 14608 Burglar resistance EN 14351-1 Expert process (PPBIM)

Window Essential characteristics Thermal transmittance EN ISO 10077-2 EN ISO 12567-2 Resistance to fire EN 13501-2 Watertightness EN 1027 Common European technical language in a data dictionary based on EN ISO 12006-3 Global Unique Identifier (GUID) One name and definition None-Essential characteristics Racking resistance EN 14608 Burglar resistance EN 14351-1 Translations

The IFC standards objects and properties in a Data Dictionary EN ISO 16739

Window Essential characteristics Thermal transmittance EN ISO 10077-2 EN ISO 12567-2 Resistance to fire EN 13501-2 Watertightness EN 1027 Ifc properties are linked with properties from CEN/CENELEC standards in a Data Dictionary EN ISO 16739 None-Essential characteristics Racking resistance EN 14608 Burglar resistance EN 14351-1

One single European approach, mandatory for all European member states

One single European approach, mandatory for all European member states National requirements

Alignment with Smart CE marking

CEN/TC 442 Data structure Data request/delivery Model IFC

Request Receive Request Receive

THANKS Lars Chr. Fredenlund WWW.COBUILDER.COM FOLLOW US FACEBOOK WWW.FACEBOOK.COM/cobuilder.international WWW.GOBIM.COM fredenlund@cobuilder.com LINKEDIN WWW.LINKEDIN.COM/cobuilder-as +47 957 24 990 TWITTER WWW.TWITTER.COM/cobuilder_international