SUBSTITUBE T8 CONNECTED TUBE
2 SubstiTUBE T8 Connected LEDVANCE SENSOR & CONNECTED TUBE SubstiTUBE Connected Sensor Co-Branding with company Steinel : Brand name: LEDVANCE powered by Steinel Wireless communication ( Zigbee) no rewiring needed Passive infra red sensor Installation only with screw driver no laptop or smart device needed IP54 protected One sensor Control of up to 50 tubes 20% / 100% 2 step dimming SubstiTUBE Connected Tube OSRAM Advanced Ultra Output Connected 1.2m/ 1.5m: 4000/ 6500K 1.2m: 2400lm, 1.5m: 3600lm Lifetime: 50,000hrs ( L70/B50) 150lm/W 5 years guarantee IP20 protected EM tube ( CCG+Direct Mains). Do not use with Electronic control gear directly! To have a connected system LED TUBE & Sensor should be purchased
3 SubstiTUBE T8 Connected System Story: OSRAM Tube meets Steinel Sensor which leads to best in class Connected system Types: 120cm & 150cm with 4000K / 6500K Wireless communication via ZigBee (no Apps, Smartphone needed) Zigbee standard used, certificate applied Up-to 50 Connected Tubes controlled by 1 sensor Sensor with daylight threshold* and presence threshold : Step dimming: 20 or 100% (no stepless dimming) Lamp off feature available. Please see slide 6 High efficiency up-to 150lm/W and up-to 3600lm Lifetime of 50.000 hrs. / Warranty 5 years for Tube and Sensor Daylight threshold will only support lit the tube. No relation to dimming
4 SubstiTUBE T8 ordering information LEDVANCE Sensor SubstiTUBE Adv UO Connected Product Name Connected Sensor ST8 CR Connected Sensor ST8 RT Connected Sensor ST8 HB ST8AU-1.2M 16W/840 220-240V CON ST8AU-1.2M 16W/865 220-240V CON ST8AU-1.5M 24W/840 220-240V CON ST8AU-1.5M 24W/865 220-240V CON EAN10 4058075801448 4058075801462 4058075801486 4052899970557 4052899970564 4052899970571 4052899970588
5 LEDVANCE Connected sensors ( Passive Infra red sensor)
6 Product Information Sheet SubstiTUBE T8 Connected Tube Key Technical Data Product Luminous flux System power Voltage System Efficiency CCT ST8A-1.5m-24W-840-Con ST8A-1.5m-24W-865-Con 3600 lm 24 W 230V 150 lm/w 4000 K 6500 K CRI > 80 Radiance angle 160 Powerfactor > 0,9 Lifetime (L70/B50) 50 000 h Switching cycles 200 000 Guarantee Dimmable 5 years Yes Length in mm 1500 Socket Energy Efficiency Class G13 A++ Packaging unit 25 Compatible with CCG, 230V mains T8 58W replacement 1.5m Not compatible with ECG Product description: LED lamp in T8 shape with G13 socket For operation at CCG or 230V mains Extremely robust due to polycarbonate body Overpower, overheat and short circuit protected High color homogeneity RoHS-conformity, no mercury Zigbee certification Key product features: Wireless connection btw tube and sensor Very efficient tube (150 lm/w) Up to 90% energy savings compared to conventional 1500mm T8 fluorescent tubes Instant 100% light without flickering 5 years OSRAM guarantee Application: Cooling and storage rooms Corridors, stairways, parking garages
7 Product Information Sheet SubstiTUBE T8 Connected Tube Key Technical Data Product Luminous flux System power Voltage System Efficiency CCT ST8A-1.2m-16W-840-Con ST8A-1.2m-16W-865-Con 2400 lm 16 W 230V 150 lm/w 4000 K 6500 K CRI > 80 Radiance angle 160 Powerfactor > 0,9 Lifetime (L70/B50) 50 000 h Switching cycles 200 000 Guarantee Dimmable 5 years Yes Length in mm 1200 Socket Energy Efficiency Class G13 A++ Packaging unit 25 Compatible with CCG, 230V mains T8 36W replacement 1.2m Not compatible with ECG Product description: LED lamp in T8 shape with G13 socket For operation at CCG or 230V mains Extremely robust due to polycarbonate body Overpower, overheat and short circuit protected High color homogeneity Zigbee certification Key product features: Very efficient tube (150 lm/w) Up to 90% energy savings compared to conventional 1200mm T8 fluorescent tubes Instant 100% light without flickering 5 years OSRAM guarantee Application: Corridors, stairways, parking garages, Office
8 Product Information Sheet SubstiTUBE T8 Connected Tube Key Technical Data Product ST8-Sensor Nominal voltage 220 240V System power 1 W Mains frequency 50Hz Diameter 6,6cm Height 9,5cm Ambient temperature range -20 50 C Dimming interface Wireless Zigbee Type of installation On-top ceiling mounting Type of protection IP54 Delay time Adjustable with set-screw Setpoint for brightness Adjustable with set-screw Connection to tube Push button Connected Sensor Product description: Brand name: LEDVANCE powered by Steinel Passive Infra red sensor Zigbee communication standard; IP54 for outdoor applications Controls of up to 50 tubes Key product features: Easy installation: mounted on the ceiling or wall 5 years guarantee Infra red sensor detects people heat or car engine heat in parking lot. Application: Industrial environment, storage rooms Corridors, stairways, parking garages
9 SubstiTUBE and Sensor installation Picto 12: Green LED light is visible. After 10 second Green LED will turn off. Picto 13: press and hold > 4 second to pair with tubes Green LED light will start blinking Picto 17: press and hold > 4 seconds turn off the LED blinking Once Tube and sensor is paired tube will dim down 20% level of luminous flux. Once light or people presence will be detected light will dim up to 100% Tube will return 20% after time delay setting expired. time setting 5 sec- 15min
10 SubstiTUBE Advanced Ultra Output Connected tube Reset button Reset button Do not touch this button during installation This button should be used only Exit from group network ( unpairing) press 4 second
11 LEDVANCE sensor pairing button function and operation way Pairing button functions Action Pairing tube and sensor Press and hold > 4sec. Green LED starts blinking Pairing completion Test function Press pairing button again for 4 sec. Press 2 times shortly Green LED will turn off Paired tubes will start blinking ( can identify which tubes are paired) Press 2 times shortly Paired tubes will start blinking constantly Lamp off Press 4 times shortly Lamp off function will activate In 15min ( optional) How to unpair tube and sensor Press 10 times shortly Set back to factory mode
12 Connected System www.ledvance.com/substitube-connected Installation video, long version user manual, FAQ will be stored. Dec.2016 ( date TBC) Required for Installation:
13 FAQs What if I don t know how to install tube and sensor? Don t worry please visit. www.ledvance.com/substitube-connected you can check installation video, detailed user manual, other product related information Substitube Connected Tube EM works with CCG or ECG? Connected tube is EM tube. Does not work with ECGs and need direct mains rewiring How do I identify whether tube is paired with sensor? Once it is paired tube will blink once and then dim down to 20% level. Please set value of daylight threshold and time delay threshold properly. Can I control dimming level? No, only 2step dimming 20% or 100% What will be the right sensor choice for my installation? Please consider detection area and ceiling height. Please see slide 8. Example: Warehouse, Factory. Connected Sensor HB will be the right choice since it can detected from 12m ceiling How do I install group installation with one sensor. Please follow the user manual. Press paring mode and install tube one by one. In case tube is already installed and do the pairing mode ( power cycle) is required due to nature of sensor. Switch off /on and then tube will start pairing What is the maximum quantities sensor can handle? 50pcs Does sensor work with other zigbee based product? Yes, it works but our goal of this project is to simply the process and easy installation and easy maintenance. No need to do controlling with smart phone like Lightify My customer is asking whether tube can also switch off? Yes, after pairing with sensor and tube are done please press 4times. If there is no people presence tube will switch off in 15min ( excluding time delay setting time)
14 LET S START ADVANCING LIGHT