Product Guide & Price List

the heater people Product Guide & Price List Valid from 1st November 2018 specialists in Commercial and industrial heaters Underfloor heating and Heating cables 2019

Typical heating GARDENS & PATIOS STORE ENTRANCES COMMUNITY HALLS Patio heaters - page 54 OFFICES Air Curtains - page 38 WAREHOUSES Radiant cassettes - page 63 PACKING AREAS Ceiling panels - page 66 Industrial fan heaters - page 40 Halogen heaters - page 58

applications SHOPS CHURCHES System X - page 26 Pew heaters - page 44 DINING AREAS WATER TREATMENT PLANTS 'All Black' radiant heaters - page 52 HAZARDOUS AREAS ATEX tubular heaters - page 48 Industrial tubular heaters - page 46 WE CAN HELP SELECT THE RIGHT HEATER FOR AN APPLICATION CALL US TO DISCUSS YOUR NEXT HEATING PROJECT

Commercial and Industrial, Electric Heaters and Controls Catalogue and Price List Valid from 1st November 2018 Underfloor Heating Mirror Demisters Heating Cables & Freeze Protection M Series Underfloor Heating Mats 6-7 EHC Underfloor Heating Cables 8-9 F Series Underfloor Foil Mats 10-11 IHC In-Screed Heating Cables 12-13 CONTROLS Underfloor Heating Controls 14-15 MD Mirror Demister Pads 13 CRJ Self Regulating Heat Cable for Pipes 16-19 PW Pipe Freeze Protection Kit 20 WM Hot Water Maintenance Cable 21 S Series Snow and Ice Melting Heating Mats 22 GP Gutter and Downpipe Heating Cable 23 Underfloor Heating and Heating Cables Fan Assisted Heaters Convection Heaters Radiant Heaters Controls SYSTEM X The Flexible Fan Heating System 26-27 SCHG Suspended Ceiling Heaters 28-29 SMH Surface Mount Ceiling Heaters 30-31 800 Series Overdoor / High Level Heaters 32-33 RH Recessed Ceiling Heaters 34-35 CA Commercial Air Curtains 36-37 HCA High Capacity Air Curtains 38-39 OUH Industrial Unit Heaters 40-42 DSU Destratification Units 43 PH Pew Heaters 44-45 SWD Industrial Tubular Heaters 46-47 TX Explosion-Proof Tubular Heaters 48-49 BLS 110V Convector 50 ETH 'All Black' Radiant Heaters 52-53 HWP Patio Heaters 54-56 CM Heated Chandelier 57 HN Halogen Heaters 58-59 MC1 Halogen Heater Control Box 61-62 ESP Radiant Cassettes 63-65 RP Radiant Ceiling Panels 66-67 CH Ceramic Heaters 68-69 RL Replacement Halogen Lamps 70 CONTROLS Specifications: Thermostats 71-77 Timers 78 Switches 79-80 System X 82 Commercial and Industrial Heaters and Controls Case Studies CASE STUDIES 83-87 Case Studies web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Underfloor Heating and Heating Cables Underfloor Heating and Heating Cables web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

M Series Heating Mats Standard Output Mats (150W/m²) Suitable as a main source of heating in most rooms UNDERFLOOR HEATING An economic means of heating a room and providing a luxurious warm floor Manufactured to the highest quality and backed by a Lifetime Warranty Application Suitable for any room including conservatories, bathrooms and wet rooms Ideal for use with a wide variety of floor surfaces including ceramic tiles, porcelain tiles, marble, slate, stone, carpet, vinyl, engineered wood and laminate flooring. Features Twin core cable assembled onto fibre glass web 3m power lead Continuous earth protection foil Continuous double sided fixing tape M Series: heat up to 16m² with a single mat Model Heated Area (m²) Mat Size (m) kw List Price M150-005 0.5 1.0 x 0.5 0.07 49.00 M150-010 1.0 2.0 x 0.5 0.15 54.00 M150-015 1.5 3.0 x 0.5 0.22 67.00 M150-020 2.0 4.0 x 0.5 0.30 90.00 M150-025 2.5 5.0 x 0.5 0.37 98.00 M150-030 3.0 6.0 x 0.5 0.45 118.00 M150-035 3.5 7.0 x 0.5 0.52 129.00 M150-040 4.0 8.0 x 0.5 0.60 155.00 M150-045 4.5 9.0 x 0.5 0.67 163.00 M150-050 5.0 10 x 0.5 0.75 177.00 M150-060 6.0 12 x 0.5 0.90 216.00 M150-070 7.0 14 x 0.5 1.05 234.00 M150-080 8.0 16 x 0.5 1.20 245.00 M150-090 9.0 18 x 0.5 1.35 268.00 M150-100 10 20 x 0.5 1.50 286.00 M150-110 11 22 x 0.5 1.65 328.00 M150-120 12 24 x 0.5 1.80 358.00 M150-140 14 28 x 0.5 2.10 395.00 M150-160 16 32 x 0.5 2.40 453.00 High Output Mats (200W/m²) Recommended for Conservatories Model Heated Area (m²) Mat Size (m) kw List Price M200-010 1.0 2.0 x 0.5 0.20 58.00 M200-015 1.5 3.0 x 0.5 0.30 77.00 M200-020 2.0 4.0 x 0.5 0.40 88.00 M200-030 3.0 6.0 x 0.5 0.60 120.00 M200-040 4.0 8.0 x 0.5 0.80 143.00 M200-050 5.0 10 x 0.5 1.00 189.00 M200-060 6.0 12 x 0.5 1.20 230.00 M200-070 7.0 14 x 0.5 1.40 265.00 M200-080 8.0 16 x 0.5 1.60 324.00 M200-090 9.0 18 x 0.5 1.80 352.00 M200-100 10 20 x 0.5 2.00 434.00 6 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Low Output Mats (100W/m²) Recommended for well insulated properties Model Heated Area (m²) Mat Size (m) kw List Price M100-010 1.0 2.0 x 0.5 0.10 52.00 M100-015 1.5 3.0 x 0.5 0.15 62.00 M100-020 2.0 4.0 x 0.5 0.20 89.00 M100-030 3.0 6.0 x 0.5 0.30 112.00 M100-040 4.0 8.0 x 0.5 0.40 152.00 M100-050 5.0 10 x 0.5 0.50 174.00 M100-060 6.0 12 x 0.5 0.60 208.00 M100-070 7.0 14 x 0.5 0.70 226.00 M100-080 8.0 16 x 0.5 0.80 241.00 M100-090 9.0 18 x 0.5 0.90 264.00 M100-100 10 20 x 0.5 1.00 287.00 M100-120 12 24 x 0.5 1.20 358.00 Mat Installation M Series heating mats can be installed in flexible selflevelling compound or directly into tile adhesive. When using with carpet, vinyl, engineered wood or laminate flooring the lowest tog underlay should be selected. If there is any doubt about the suitability of a floor surface for use with underfloor heating, confirmation should be sought from the flooring supplier. Selection Typical M Series Installation Mat cut here LIFETIME WARRANTY NEXT DAY DELIVERY FREE DESIGN SERVICE Kitchen Cabinet Mat cut here UNDERFLOOR HEATING The objective is to cover as high a percentage of the free floor area as possible. Mats should not be installed under fixtures such as kitchen cabinets and shower trays. As a rule of thumb, select a mat covering an area approximately 10% smaller than the free floor area. In larger rooms, it is common practice to use two or more mats. Generally, the mats are connected in parallel and controlled by a single thermostat. Insulation Boards Limits downward heat loss Model Dimensions (mm) Area Covered (m²) List Price F-Board-6 1200 x 600 x 6 0.72 15.30 F-Board-10 1200 x 600 x 10 0.72 17.00 Cold lead Electrical connection + thermostat Mat cut here Repair Kit Model Description List Price EHM-R-Kit Cable Repair Kit (emergency use) 27.00 F-Board-6 and -10 Emergency Repair Kit FOR THERMOSTATS - See PAGE 14 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 7

EHC Heating Cables UNDERFLOOR HEATING An economic means of heating a room and providing a luxurious warm floor Ideally suited to small and irregularly shaped rooms Manufactured to the highest quality and backed by a Lifetime Warranty Applications Suitable for any room including conservatories, bathrooms and wet rooms Ideal for use with a wide variety of floor surfaces including ceramic tiles, porcelain tiles, marble, stone, carpet, vinyl, engineered wood and laminate flooring. Features Twin core cable supplied with high adhesion tape 3m power lead Continuous earth protection foil Heat Cables Model kw Heated Area (m²) Cable Length (m) List Price EHC-012 0.12 0.7 1.0 11 46.00 EHC-020 0.20 1.1 1.5 19 51.00 EHC-025 0.25 1.6 2.0 24 58.00 EHC-032 0.32 2.1 2.5 32 71.00 EHC-040 0.40 2.6 2.9 37 73.00 EHC-045 0.45 3.0 3.3 46 86.00 EHC-052 0.52 3.4 3.8 50 89.00 EHC-060 0.60 3.9 4.5 64 112.00 EHC-075 0.75 4.6 6.0 76 124.00 EHC-095 0.95 6.1 7.5 87 145.00 EHC-110 1.10 7.6 8.5 115 178.00 EHC-130 1.30 8.6 10.0 131 198.00 EHC-170 1.70 10.1 13.0 159 264.00 EHC-200 2.00 13.1 15.5 194 349.00 Insulation Boards - Limits downward heat loss Model Dimensions (mm) Area Covered (m²) List Price F-Board-6 1200 x 600 x 6 0.72 15.30 F-Board-10 1200 x 600 x 10 0.72 17.00 8 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel +44 (0)1293 547361 fax +44 (0)1293 531432

Tiles Tile adhesive Typical EHC Installation Fixing tape Repair Kit EHC Heating cable Subfloor F-Board Insulation (optional) Model Description List Price EHM-R-Kit Cable repair kit (emergency use) 27.00 UNDERFLOOR HEATING Cable Installation EHC heating cables can be installed in flexible self-levelling compound or directly into tile adhesive. When using with carpet, vinyl, engineered wood or laminate flooring the lowest tog underlay should be selected. If there is any doubt about the suitability of a floor surface for use with underfloor heating, confirmation should be sought from the flooring supplier. F-Board-6 and -10 Electrical connections + thermostat Cold lead Emergency Repair Kit Selection The objective is to cover as high a percentage of the free floor area as possible. Cables should not be installed under fixtures such as kitchen cabinets and shower trays. In larger rooms, it is common practice to use two or more cables. Generally, the cables are connected in parallel and controlled by a single thermostat. An EHC heating cable installed in a bathroom FOR THERMOSTATS - See PAGE 14 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 9

F Series Foil Heating Mats for laminate and engineered wood floors UNDERFLOOR HEATING An economic means of heating a room and providing a luxurious warm floor Manufactured to the highest quality and backed by a 10 Year Warranty Installed without adhesives or compounds Applications Suitable for any room including bathrooms Specifically designed for laminate or engineered wood floors 10 Features Heating cables sandwiched between 2 layers of aluminium ensuring excellent heat distribution Can be manipulated to fill a space just like a conventional heating mat Low profile (2mm approximate) keeps floor build-up to a minimum 3m power lead F Series Foil Heating Mats Model Heated Area (m²) Mat Size (m) kw List Price F140-010 1.0 2.0 x 0.5 0.14 59.00 F140-015 1.5 3.0 x 0.5 0.21 81.00 F140-020 2.0 4.0 x 0.5 0.28 95.00 F140-030 3.0 6.0 x 0.5 0.42 127.00 F140-040 4.0 8.0 x 0.5 0.56 165.00 F140-050 5.0 10 x 0.5 0.70 192.00 F140-060 6.0 12 x 0.5 0.84 223.00 F140-070 7.0 14 x 0.5 0.98 267.00 F140-080 8.0 16 x 0.5 1.12 287.00 F140-090 9.0 18 x 0.5 1.26 347.00 F140-100 10 20 x 0.5 1.40 359.00 F140-120 12 24 x 0.5 1.68 419.00 F140-140 14 28 x 0.5 1.96 500.00 F Series foil heating mat specifically designed for laminate and engineered wood floors Insulation and Fixing Tape Model Description Area Covered List Price (m²) I-Pack-6 Pack of 19 sheets of I-Board-6 insulation/underlay 6mm thick 9.76 29.00 I-Board-6 Individual sheet insulation/underlay 6mm thick 0.5 3.20 LHT Fixing tape for I-Board 10 10.20 AL-50 Fixing tape for F Series mat 10 10.20 10 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Mat Installation F Series mats should be installed directly below laminate or engineered wood flooring and held in place with aluminium tape. The mats should be installed on top of a layer of I-Board-6 insulation/underlay which should be held in place with LHT high adhesion tape. A low profile F Series Installation Laminate or engineered wood flooring F Series Foil Heating Mat Selection I-Board-6 Insulation/underlay Subfloor The objective is to cover as high a percentage of the free floor area as possible. Mats should not be installed under fixtures such as kitchen cabinets and shower trays. As a rule of thumb, select a mat covering an area approximately 10% smaller than the free floor area. In larger rooms, it is common practice to use two or more mats. Generally, the mats are connected in parallel and controlled by a single thermostat. UNDERFLOOR HEATING Typical F Series Installation in a bathroom Externally mounted thermostat Cold Lead Cut mat here Cut mat here Cut mat here BATH Cut mat here Cut mat here SHOWER TRAY FOR THERMOSTATS - See PAGE 14 I-Board-6 LHT High Adhesive Tape AL-50 Aluminium Tape web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 11

IHC In-Screed Heating Cable UNDERFLOOR HEATING A more robust heating cable suitable for installation in a concrete screed Manufactured to the highest quality and backed by a 10 year warranty Applications Suitable for any type of room and both domestic and commercial installations Specifically designed for installation in a concrete screed Can be used with a wide variety of floor surfaces Features Twin core cable 3m power lead Continuous earth protection Held in place with metal fixing strips 10 Drum of IHC in-screed cable with IHC-F fixing strip In Screed Heating Cables Model kw Cable length (m) Area Covered (m²) @ 100W/m² Area Covered (m²) @ 150W/m² Area Covered (m²) @ 175W/m² List Price IHC-016 0.16 8.3 1.6 1.1 0.9 44.00 IHC-027 0.27 14.0 2.7 1.8 1.5 55.00 IHC-034 0.34 17.2 3.4 2.3 1.9 63.00 IHC-045 0.45 22.5 4.5 3.0 2.6 74.00 IHC-054 0.54 27.4 5.4 3.6 3.1 80.00 IHC-064 0.64 32.1 6.4 4.3 3.7 93.00 IHC-072 0.72 35.8 7.2 4.8 4.1 103.00 IHC-087 0.87 43.8 8.7 5.8 5.0 117.00 IHC-107 1.07 53.5 10.7 7.1 6.1 127.00 IHC-129 1.29 64.4 12.9 8.6 7.4 143.00 IHC-158 1.58 79.0 15.8 10.5 9.0 164.00 IHC-185 1.85 92.4 18.5 12.3 10.6 204.00 IHC-230 2.30 117.3 23.0 15.3 13.1 262.00 IHC-275 2.75 141.4 27.5 18.3 15.7 330.00 IHC-F Metal fixing strip (10m) typically one strip is required for every 8m² of heated area 24.00 Cable Selection The objective is to cover as high a percentage of the free floor area as possible. Cables should not be installed under fixtures such as kitchen cabinets and shower trays. In larger rooms, it is common practice to use two or more cables which are usually connected in parallel and controlled by a single thermostat. Typically, we suggest a watt density between 150W/m² and 175W/m² however lower densities are often used in well insulated properties Cable Installation IHC cables are installed on a layer of insulation using IHC-F fixing strip. The cable should be arranged in evenly spaced loops and covered in 80mm to 100mm of concrete screed. IHC cables can be used with a wide variety of floor surfaces. If there is any doubt about the suitability of the suitability of a floor surface for use with underfloor heating, FOR THERMOSTATS - See PAGE 14 confirmation should be sought from the flooring supplier. 12 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

MD Mirror Demister Pads MD-50 50W Demister pad with a typical running cost of 5 pence per week MIRROR DEMISTERS Providing a mist free mirror 100% effective in little over 2 minutes Very low energy consumption Simply integrated into the lighting circuit ensuring that they are not left running Features Protects an area approximately 20% larger than the pad itself Double insulated and completely sealed for total safety Less than 1mm thick Peel off adhesive backing 1m long power lead Peel-off adhesive backing BESPOKE SIZES AVAILABLE Selection PLEASE CALL US FOR PRICE AND DELIVERY MD Mirror Demister Pads - Specifications and Prices Model Volts Watts Dimensions (mm) List Price MD-12 230 12 252 x 274 23.00 MD-28 230 28 574 x 274 29.00 MD-50 230 50 519 x 524 40.00 MD-100 230 100 1004 x 524 57.00 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 13

CONTROLS for Underfloor Heating Thermostats UNDERFLOOR HEATING T16CW Touch screen programmable white A16C Manual T16CS Touch screen programmable silver U16C Basic programmable T16CB Touch screen programmable black Floor probe and conduit supplied as standard 'Air and floor or floor only control Smart Thermostats Control heating using ios (8.0 or later) and Android (4.0 or later) devices T16R Optional air sensor for T16C Floor probe and conduit provided with every BN Thermic thermostat S16CW Smart Thermostat - with white, or brushed chrome surround S16CB Smart Thermostat - with black, or black with chrome surround Thermostats Model Load Description Details List Price T16CW 16A Programmable Touch Screen (White) Page 71 107.00 T16CS 16A Programmable Touch Screen (Silver) Page 71 114.00 T16CB 16A Programmable Touch Screen (Black) Page 71 114.00 T16R Optional IP65 remote sensor for T16C thermostats Page 71 14.30 S16CW 16A Smart Thermostat white or brushed chrome (installer selects) Page 72 204.00 S16CB 16A Smart Thermostat black or black with chrome (installer selects) Page 72 204.00 U16C 15A Programmable Thermostat Page 71 82.00 A16C 15A Manual Thermostat Page 71 72.00 14 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Contactors For use when the installed load exceeds the switching capacity of the thermostat Contactors Model Amperage Max kw (230V 1ph) Details List Price CON-32 32 7 Page 81 36.00 CON-50 50 11.5 Page 81 48.00 CON-80 80 18 Page 81 89.00 ENCL-D Enclosure for CON-32 and CON-50 Page 81 19.00 Wireless Control Our wireless thermostat can provide simple, easy to install control in a single room and is especially convenient when one thermostat is required to control more than one heating mat. It can also control larger loads without requiring a noisy contactor. For multi-room installations, the introduction of a central programmer allows all the rooms in a house to be controlled from a single point. CON-32 Contactor Relay Box Usually mounted at skirting level Switching capacity 16A Supplied with floor probe Suitable for any room Programmable Thermostat Can be paired with up to four relay boxes UNDERFLOOR HEATING Optional Central control Touch Screen device Can be paired with up to 24 thermostats Wireless Control Prices WSB-1 Relay Box Model Description Details List Price WSB-1 Wireless Relay Box 16A Page 72 87.00 WST-1 Wireless Thermostat (for use with WSB-1 relay box) Page 72 93.00 WSP-1 Wireless Central Programmer Page 73 198.00 WSP-1 Central Programmer A Typical Wireless Control System WSP-1 Central Programmer WST-1 Wireless Thermostat LARGE ROOM Requiring 2x WSB-1 Relay Boxes WSB-1 Relay Box WSB-1 Relay Box WST-1 Wireless Thermostat WSB-1 Relay Box SMALLER ROOM Requiring 1x WSB-1 Relay Box WST-1 Wireless Thermostat web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 15

CRJ Self Regulating Heat Cable for Pipes PIPE FREEZE & GUTTER PROTECTION Prevents water from freezing in metal and plastic pipes Maintains temperature in pipes for a wide variety of industrial processes Supplied by the metre order as much or as little as required Typical Applications Stables and Farms Sprinkler systems Wide variety of industrial plants Features Power consumption decreases as pipe temperature increases Can be cut to length on site Full length earth braid and thermoplastic outer jacket All cables require 230V supply Installed onto pipe and under insulation Cables with EX suffix can be used in hazardous areas Zones 1, 2, 21 and 22 (temperature class T6 with 230V supply) or in safe areas CRJ and CRJM Cables Cables and Prices Model W/m List Price/m (under 50m) List Price/m (50m+) CRJM-11 11 7.50 6.50 CRJM-17 17 8.20 7.20 CRJ-25 25 15.50 14.50 CRJ-25EX (ATEX) 2 25 5 16.00 15.00 CRJ-40EX (ATEX) 4 40 0 17.00 16.00 FOR THERMOSTATS See PAGES 74 & 77 Technical Data Cable Max Circuit Length (0 C start up) Breaker (type C) for Max Circuit Length Max Exposure Temperature (Power On) Max Exposure Temperature (Power Off) CRJM-11 128m 16A 65 C 85 C CRJM-17 102m 16A 65 C 85 C CRJ-25 120m 32A 85 C 85 C CRJ-25X 120m 32A 85 C 85 C CRJ-40X 94m 32A 85 C 85 C 16 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Accessories Model Description List Price CRJ-T1 THK THKM CRJ-S PF-T Termination Kit (one per circuit) uses shrink on material suitable for CRJ and CRJM but not for use when ATEX approval required. Prepares cable for electrical connection and seals the far end. Termination Kit (one per circuit) uses silicone can be used when ATEX approval required or for general purpose applications (not for use with CRJM). Prepares cable for electrical connection and seals the far end. Termination Kit (one per circuit) uses silicone for use with CRJM. Prepares cable for electrical connection and seals the far end. Splice/T Kit one for every splice or T joint. Not for use when ATEX approval required. Fixing Tape (33mm x 19mm) for fixing cable to pipe max temp 80 C 13.00 25.00 24.00 12.50 2.10 PIPE FREEZE & GUTTER PROTECTION AL-50 Aluminium Tape (45m x 50mm) for wrapping plastic pipes before installing cable or for fixing cable to pipe - max temp 110⁰C (note maximum exposure temp of cable) 10.20 PF-L Caution Label (10 pack) apply to outside of insulation for safety 6.00 THB Stainless Steel Bracket for THJ junction boxes or THT thermostats c/w stainless steel bands for fixing to pipe for insulation up to 50mm thick and pipes up to 150mm diameter 19.00 THJ Junction Box IP66 6way terminal block 40A max 29.00 THJEX ATEX Junction Box with 3 x M20 entries (one plugged) 6 way terminal block 16A max 141.00 THT Capillary Thermostat 5 to 50 C IP66 (16A). See page 77. 93.00 THTEX ATEX Capillary Thermostat 0 to 40 C IP66 (16A). See page 77. 480.00 FST2-IN Frost Thermostat Indoor Use (20A) see page 74 70.00 FST2-EX Frost Thermostat Outdoor Use (20A) see page 74 132.00 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 17

CRJ Self Regulating Heat Cable for Pipes - Continued PIPE FREEZE & GUTTER PROTECTION Selection Table Pipe Freeze Protection (based on a minimum ambient temperature of -20 C and mineral wool insulation). Cable installed in a straight line. Outside Pipe Diameter Insulation Thickness (mm) 12 25 50 12mm ( ½ Pipe) CRJM-11 CRJM-11 CRJM-11 25mm ( 1 Pipe) CRJM-11 CRJM-11 CRJM-11 50mm (2 Pipe) CRJM-17 CRJM-11 CRJM-11 75mm (3 Pipe) CRJ-25 CRJM-17 CRJM-11 100mm (4 Pipe) CRJ-40 CRJM-17 CRJM-11 150mm (6 Pipe) ----- CRJ-25 CRJM-17 200mm (8 Pipe) ----- CRJ-40 CRJM-17 Trace heated pipe ready for insulation to be installed CRJ-40X maintaining pipe temperature in an industrial plant 18 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Selection Table - Temperature Maintenance (based on a minimum ambient temperature of -15 C, carbon steel pipe and mineral wool insulation). Cable installed in a straight line. Outside Pipe Diameter Pipe Temperature 25mm Thick Insulation 50mm Thick Insulation 25mm (1 Pipe) 20 C CRJ-25 CRJ-25 30 C CRJ-25 CRJ-25 40 C CRJ-40 CRJ-25 50 C ----- CRJ-40 50mm (2 Pipe) 20 C CRJ-25 CRJ-25 30 C CRJ-40 CRJ-25 40 C ----- CRJ-40 50 C ----- CRJ-40 75mm (3 Pipe) 20 C CRJ-25 CRJ-25 30 C CRJ-40 CRJ-40 40 C ----- CRJ-40 100mm (4 Pipe) 20 C CRJ-40 CRJ-25 30 C ----- CRJ-40 40 C ----- CRJ-40 PIPE FREEZE & GUTTER PROTECTION Important s Changes in selection parameters can affect cable selection. Please call BN Thermic to discuss cable selection for your project. Additional pipe temperature control is always recommended This selection table is designed to cover the more commonly encountered applications. If your requirements fall outside the limit of this table, please call BN Thermic. Buswires. Inherently temperature-safe self-regulating matrix. Thermoplastic electrical insulation. 45 40 35 CRJ-40 Nominal output for cable installed on an insulated carbon steel pipe Continuous conductive covering of metal braid. 30 25 W/m 20 CRJ-25 Thermoplastic outer jacket. 15 10 5 CRJ Self Regulating Cable - Dispensed by the metre 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 Pipe Temperature (⁰C) web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 19

PW Pipe Freeze Protection Kits MIRROR DEMISTERS Prevents water from freezing in metal and plastic pipes Avoids the cost and inconvenience of burst water pipes Quick and simple to install Applications Domestic properties Commercial premises Mobile homes Features 1.5m power lead and 3-pin plug Built-in thermostat (pre-set at 3 C) Fully moisture proof All cables require 230V supply Installed onto pipe and under insulation (20mm max) Straight run of cable protects pipes up to 50mm dia. Can be wound in an evenly spaced helix (always use the shortest suitable cable) PW Water Pipe Freeze Protection Cable a low price for peace of mind Cables and Prices Model Watts Heated Length List Price (m) PW-01 12 1 64.00 PW-02 24 2 70.00 PW-03 36 3 77.00 PW-04 48 4 81.00 PW-06 72 6 88.00 PW-10 136 10 90.00 PW-14 152 14 92.00 PW-21 281 21 99.00 PW-30 337 30 113.00 PW-42 490 42 131.00 PW-06 with built-in thermostat and UK plug Accessories Model Description List Price PF-L Caution label (10 pack) apply to outside of insulation 6.00 PF-T Fixing Tape (33m x 19mm) 2.10 AL-50 Aluminium Tape (45m x 50mm) for wrapping plastic pipes before installing cable 10.20 PF-T Fixing Tape AL-50 Aluminium Tape PF-L Caution Labels 20 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

WM Self Regulating Hot Water Maintenance Cable Maintains hot water in pipes at desired temperature Ensures hot water is instantly available Eliminates need for return pipework and re-circulating pumps Typical Applications Hot water pipes in both domestic and commercial buildings. Features Maintains water temperature at approximately 50 C to 60 C Output reduces automatically as water temperature rises Can be cut to length on site Full length earth braid Requires 230V supply and must be installed under insulation WM heating cable maintaining hot water temperature in a school before insulation added PIPE FREEZE & GUTTER PROTECTION Insulation Thickness (mm) Cable should be installed in a straight line under installation Maintain Temperature 15mm Pipe 22mm Pipe 28mm Pipe 35mm Pipe 42mm Pipe 54mm Pipe 60 C 25 30 40 50 60 75 55 C 20 25 30 40 50 60 50 C 15 20 25 30 40 50 Maximum Circuit Length and Breaker Size Max. Circuit (m) Breaker (A) 128 20 Accessories Model Description List Price CRJ-T1 Termination Kit (one per circuit) 13.00 uses shrink on material THK Termination Kit (one per circuit) 25.00 uses silicone CRJ-S Splice/T Kit (one for every splice or 12.50 T joint) PF-L Caution label (10 pack) apply to 6.00 outside of insulation PF-T Fixing Tape (33m x 19mm) 2.10 AL-50 Aluminium Tape (45m x 50mm) 10.20 for wrapping plastic pipes before installing cable THJ Junction Box IP66 6 way terminal block 40A 29.00 PF-T Fixing Tape Cable and Price Model W/m List Price/m WM-09 9 12.50 AL-50 Aluminium Tape PF-L Caution Labels web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 21

S Series Snow and Ice Melting Heating Mats PIPE FREEZE & GUTTER PROTECTION Prevents accumulation of snow and ice Ensures year-round access to domestic and commercial buildings Ensures safety in icy conditions Typical Applications Driveways Ramps Disabled access Patios Parking areas Pavements Features Two-core cable assembled onto a web 5m cold lead Continuous earth braid 400W/m² power density Selection and Installation Simply select the mat or combination of mats that cover the area that requires protection. S Series mats can be installed in concrete or in fine washed sand below paving slabs. Basic control can be achieved using a simple frost thermostat. However, for larger installations, we recommend a thermostat that monitors both temperature and moisture. S Series Snow and Ice Melting Mat. An economic means of preventing the accumulation of snow and ice. 10 S Series - Snow and Ice Melting Mats Model Heated Area (m²) Mat Size (m) kw List Price S400-009 0.9 1.1 x 0.75 0.34 111.00 S400-014 1.4 1.9 x 0.75 0.57 120.00 S400-022 2.2 2.9 x 0.75 0.88 145.00 S400-026 2.6 3.4 x 0.75 1.03 166.00 S400-033 3.3 4.4 x 0.75 1.32 199.00 S400-043 4.3 5.7 x 0.75 1.7 230.00 S400-047 4.7 6.3 x 0.75 1.88 241.00 S400-061 6.1 8.2 x 0.75 2.45 318.00 S400-073 7.3 9.7 x 0.75 2.9 346.00 S400-085 8.5 11.3 x 0.75 3.4 442.00 S400-130 13 17.3 x 0.75 5.2 668.00 ERC Snow and Ice Melting Mat providing safe access to an office building Thermostat Description Model Details List Price Weatherproof frost thermostat FST2-EX Page 74 132.00 FST2-EX Low cost control for smaller installations 22 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

GP Self-regulating cable for Gutters and Downpipes Stops accumulation of snow and ice Prevents damage to gutters and properties Reduces danger from collapsing gutters and falling icicles Applications Domestic properties Commercial Premises Features Power consumption decreases as ambient temperature increases No chance of hot spots from cables crossing or touching Can be cut to length on site UV resistant Full length earth braid Use a single run for gutters up to 120mm wide and an additional run for every extra 120mm Cables require 230V supply Connection to power lead via THJ junction box Tin coated copper bus wires Self limiting polymer with bonded jacket Thermoplastic insulation Keep gutters and downpipes ice-free FST2-EX IP65 Frost Thermostat PIPE FREEZE & GUTTER PROTECTION Metal braid Cable Price Model W/m List Price/m GP-18 18 12.50 Thermoplastic over jacket Structure of GP-18 heating cable THK Termination Kit THJ IP66 Junction Box Accessories Model Description List Price THK Termination kit (one per cricuit) uses silicone 25.00 THJ Junction box IP66 6-way terminal block 40A max 29.00 GP-S Spacer Kit (also protects against sharp edges) 21.00 Optional Control GP-S spacer kit Type Description Model Details List Price Thermostat IP65 Frost thermostat FST2-EX Page 74 132.00 Cable length against breaker size (assuming 00C start up) Breaker (A) 6 10 16 20 32 Max Cable length (m) 24 38 62 78 86 GP-S spacer protecting GP-18 cable from a sharp edge web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 23

Don't forget... provides FREE OF CHARGE heating designs 24 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Commercial and Industrial Heaters and Controls Commercial and Industrial Heaters and Controls web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

SystemX The Flexible Fan Heating System FAN ASSISTED HEATERS Mix and match fan heaters and air curtains in a control daisy chain Control any combination of heaters and air curtains in any combination and any sequence All control connections by Cat5 cable for super quick and error free installation Controllers do not require their own 230V supply Ceiling Grid Heaters (600 x 600 grid) Model kw Tech Data List Price XC-30 3.0 See SCHG-30 (page 28) 383.00 XC-45 4.5 See SCHG-45 (page 28) 396.00 XC-60 6.0 See SCHG-60 (page 28) 534.00 Wall Mounted Fan Heater/Overdoor Heater Model kw Length (mm) Tech Data List Price XD-30 3.0 635 See 830 (page 32) 365.00 XD-60 6.0 1105 See 860 (page 32) 537.00 XD-90* 9.0 1620 See 890 (page 32) 792.00 *XD-90 suitable for overdoor duty only. Surface Mount Ceiling Heaters (can be suspended) Model kw Tech Data List Price XS-30 3.0 See SMH-30 (page 30) 385.00 XS-45 4.5 See SMH-45 (page 30) 398.00 XS-60 6.0 See SMH-60 (page 30) 530.00 Recessed Heaters Model kw Length (mm) Tech Data List Price XR-20 3.0 363 See RH-20 (page 34) 310.00 XR-30 3.0 597 See RH-30 (page 34) 350.00 XR-60 6.0 1198 See RH-60 (page 34) 568.00 Commercial Air Curtains Model kw Length (mm) Tech Data List Price XAS-30 3.0 635 See CAS-30 (page 36) 384.00 XAS-45 4.4 635 See CAS-45 (page 36) 389.00 XAD-60 6.0 1105 See CAD-60 (page 36) 574.00 XAD-90 9.0 1105 See CAD-90 (page 36) 642.00 XAT-90 9.0 1620 See CAT-90 (page 36) 744.00 XAT-135 13.5 1620 See CAT-135 (page 36) 779.00 26 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Industrial Fan Heaters Model kw Tech Data* List Price CX1 with thermostat CX2 with tamper resistant thermostat CX3 without thermostat CX6 digital controller CXS optional remote sensor for CX1, CX2 or CX6 XH-03 3.0 See OUH2-03 (page 40) 739.00 XH-05 5.0 See OUH2-05 (page 40) 743.00 XH-07 7.5 See OUH2-07 (page 40) 769.00 XH-10 10 See OUH2-10 (page 40) 810.00 XH-15 15 See OUH2-15 (page 40) 1140.00 XH-20 20 See OUH2-20 (page 40) 1195.00 XH-25 25 See OUH2-25 (page 40) 1305.00 *XH models do not have a built-in thermostat System X control components All System X controllers provide high heat/low heat/fan only (summer use) settings and do not require their own 230V supply Type Description Model Details List Price Controller Controller Controller Controller Sensor Cable Cable Cable Joiner With thermostat With tamper resistant thermostat Without thermostat With digital programmable thermostat Optional remote sensor for use with CX1, CX2 or CX6 Cat5 terminated 5m Cat5 terminated 10m Cat5 terminated 20m Cat5 Cable Joiner CX1 Page 82 132.00 CX2 Page 82 134.00 CX3 Page 82 124.00 CX6 Page 82 182.00 CXS Page 82 30.00 DX05 --- 6.00 DX10 --- 9.00 DX20 --- 13.00 JX1 --- 2.80 FAN ASSISTED HEATERS Daisy chain can consist of up to 12 identical heaters OR Different heaters in any combination or sequence web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 27

SCHG Fan Assisted Heaters for 600 x 600 Ceiling Grid FAN ASSISTED HEATERS High quality commercial fan heaters manufactured in the UK Ceiling mounting allows free use of floor and wall space Suitable for a wide range of commercial premises Applications Shops Cafes Changing rooms Entrance Areas Features Designed to rest in the T bar of a 600 x 600 suspended ceiling grid Air inlet and outlet through the front panel no requirement for air supply from the ceiling void White aluminium egg-crate grille supplied with every heater Pre-wired to convenient rear-mounted terminal enclosures Output can be reduced from high to low by removing link in terminal enclosure Built-in electronic thermostat ('T' suffix only) All models can be switched directly by the CS-7 switch and/or RST2-IN or RST-TP thermostat CS-7 switch for high/low/fan only settings Heater range and pricing Model kw Built-in Thermostat List Price SCHG-30 3.0 No 233.00 SCHG-30T 3.0 Yes 319.00 SCHG-45 4.5 No 276.00 SCHG-45T 4.5 Yes 349.00 SCHG-60 6.0 No 391.00 SCHG-60T 6.0 Yes 470.00 3kW and 4.5kW heaters and grille Physical Data kw Dimension (mm) Required clearance Weight W D H above grid (mm) (kg) 3.0 576 592 153 200 9 4.5 576 592 153 200 10 6.0 576 592 152 200 13 6kW heater and grille 28 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Performance Data kw Volts Airflow (m³/h) db*@2m Recommended Mounting Height (m) High Low Min Max 3.0 2.0 230 245 56 2.4 3.0 4.5 2.25 230 345 60 3.0 4.0 6.0 4.0 230 490 58 2.4 3.0 *Noise levels are factory tested not laboratory tested Control Options and Prices Type Description Model Details List Price Switch On/off/high heat/low heat/fan only CS-7 Page 79 62.00 Thermostat Adjustable thermostat (not for use with 'T' suffix models) RST2-IN Page 74 76.00 Thermostat Tamperproof thermostat (not for use with 'T' suffix models) RST-TP Page 73 82.00 FAN ASSISTED HEATERS 3kW providing comfort heat for customer at an industrial trade counter An SCHG fan heater provides simple and reliable heating in a car service reception area Heater specifically designed for integration into a suspended ceiling grid FOR MULTI-HEATER SYSTEMS WE RECOMMEND OUR SYSTEM X - See PAGE 26 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 29

SMH Surface Mount Ceiling Heaters FAN ASSISTED HEATERS High quality commercial fan heaters manufactured in the UK Ceiling mounting allows free use of floor and wall space Ideal for premises that do not have suspended ceilings Applications Shops Cafes Changing rooms Entrance Areas Features Compact smart design with white paint finish Simple keyhole screw fixing to a conventional ceiling M6 threaded holes for suspension by drop rods Output can be reduced from high to low by removing link in terminal enclosure Built-in electronic thermostat ('T' suffix only) All models can be switched by the CS-7 controller Models without built-in thermostat can be controlled by the CS-7 controller and/or RST2-IN or RST-TP thermostat 3kW and 4.5kW versions Heater Range and Prices Model kw Built-in Thermostat List Price SMH-30 3.0 No 268.00 SMH-30T 3.0 Yes 345.00 SMH-45 4.5 No 285.00 SMH-45T 4.5 Yes 361.00 SMH-60 6.0 No 376.00 SMH-60T 6.0 Yes 458.00 Physical Data kw Dimension (mm) Weight (kg) 6kW Model W D H 3.0 575 392 152 8.0 4.5 575 392 152 11.0 6.0 575 592 152 12.5 SMH heater suspended from drop rods Performance Data kw Volts Airflow (m³/h) db*@2m Recommended Mounting Height (m) High Low Min Max 3.0 2.0 230/1 245 56 2.4 3.0 4.5 2.25 230/1 345 60 3.0 4.0 6.0 4.0 230/1 490 58 2.4 3.0 CS-7 switch for high/low/fan only settings *Noise levels are factory tested not laboratory tested 30 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Control Options and Prices Type Description Model Details List Price Switch On/off/high heat/low heat/fan only CS-7 Page 79 62.00 Thermostat Adjustable thermostat (not for use with 'T' suffix models) RST2-IN Page 74 76.00 Thermostat Tamperproof thermostat (not for use with 'T' suffix models) RST-TP Page 73 82.00 FAN ASSISTED HEATERS The rugged SMH is well suited to industrial applications SMH heaters installed in an auction house Warming customers in a factory outlet FOR MULTI-HEATER SYSTEMS WE RECOMMEND OUR SYSTEM X - See PAGE 26 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 31

800 Series High Level Wall or Overdoor Fan Assisted Heaters High quality commercial fan heaters manufactured in the UK Smart modern appearance Can be used as a general purpose commercial space heater or as an overdoor heater FAN ASSISTED HEATERS Typical Applications Space heating or overdoor heating in the following premises Shops Entrance Areas Cafes Community halls Changing rooms Workshops Features Smart design with attractive white paint finish Dual function bracket: vertical discharge (overdoor) or angled discharge (general space heating) - overdoor only for 9kW models M8 threaded hole for drop rod suspension Panel front on/off switch Pre-wired to rear-mounted terminal enclosures Output can be reduced from high to low by removing link in terminal enclosure Built-in electronic thermostat ('T' suffix only) All models can be switched by the CS-7 controller Models without built-in thermostat can be controlled by the CS-7 controller and/or RST2-IN or RST-TP thermostat 830T with wall bracket fitted 860T with wall bracket fitted 890T Model with built in thermostat Heater Range and Prices Model kw Built-in Thermostat List Price 830 3.0 No 203.00 830T 3.0 Yes 258.00 860 6.0 No 366.00 860T 6.0 Yes 435.00 890 9.0 No 615.00 890T 9.0 Yes 690.00 Physical Data kw Dimension (mm) Weight (kg) W D H 3.0 635 108 225 7 6.0 1105 108 225 11.5 9.0 1620 108 225 17 CS-7 switch for high/low/fan only settings Overdoor heater providing a warm welcome for customers 32 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Performance Data kw Volts Airflow (m³/h) db*@2m Recommended Mounting Height (m) High Low Min Max 3.0 2.0 230 245 56 1.8 3.0 6.0 4.0 230 490 58 1.8 3.0 9.0 6.0 230V or 400/3N 735 58 1.8 3.0 *Noise levels are factory tested not laboratory tested Control Options and Prices Type Description Model Details List Price Switch On/off/high heat/low heat/fan only CS-7 Page 79 62.00 Thermostat Adjustable thermostat (not for use with 'T' suffix models) RST2-IN Page 74 76.00 Thermostat Tamperproof thermostat (not for use with 'T' suffix models) RST-TP Page 73 82.00 Overdoor heater installed to provide a 450 warm air stream FAN ASSISTED HEATERS 6kW heater combatting draughts in a Hampshire church 6kW heater installed in a trendy juice bar FOR MULTI-HEATER SYSTEMS WE RECOMMEND OUR SYSTEM X - See PAGE 26 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 33

RH Recessed Fan Assisted Heaters High quality commercial fan heaters manufactured in the UK Recessed installation reduces visual impact Suitable for ceiling or wall mounting FAN ASSISTED HEATERS RH-30 3kW recessed heater commonly installed above a door RH-20 Extremely compact 2kW recessed heater RH-60 6kW recessed heater with integral relay Typical Applications Space heating or overdoor heating in the following premises Shops Cafes Changing rooms Entrance Areas Community halls Workshops Features Air inlet and output through front panel no requirement for air supply to the rear of the heater White aluminium grille is the only visible part of heater Suitable for horizontal or vertical discharge Simple fixing through the face of the heater Pre-wired to rear-mounted terminal enclosures Output can be reduced from high to low by removing link in terminal enclosure Can be switched directly by the CS-7 switch and/or RST2-IN or RST-TP thermostat Heater Range and Prices Model kw List Price RH-20 2.0 177.00 RH-30 3.0 219.00 RH-60 6.0 464.00 RH-30 providing comfort heat in a charity shop 34 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

FAN ASSISTED HEATERS A pair of 3kW heaters welcoming customers in a shopping mall Recessed heater installed above a doorway to combat draughts Physical Data kw Dimension (mm) Aperture A B Size (mm) Insert Clearance (mm) Weight (kg) 2.0 363 307 315 x 150 200 4 3.0 597 550 560 x 150 200 6 6.0 1198 1138 1148 x 150 200 12 Performance Data kw Volts Airflow db*@2m Recommended Mounting Height (m) High Low (m³/h) Min Max 2.0 1.0 230 132 50 1.8 2.4 3.0 2.0 230 245 56 1.8 3.0 6.0 4.0 230 490 58 1.8 3.0 *Noise levels are factory tested not laboratory tested Control Options and Prices Type Description Model Details List Price Switch On/off/high heat/low heat/fan only CS-7 Page 79 62.00 Thermostat Adjustable thermostat RST2-IN Page 74 76.00 Thermostat Tamperproof RST-TP Page 73 82.00 CS-7 switch for high/low/ fan only settings FOR MULTI-HEATER SYSTEMS WE RECOMMEND OUR SYSTEM X - See PAGE 26 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 35

CA Commercial Air Curtains new Produces a higher air velocity than an overdoor heater for a more effective air screen Helps to reduce heating costs by inhibiting heat losses Electric heating elements offset chill factor associated with fast air movement and contribute to indoor air temperature FAN ASSISTED HEATERS CAS CAD Typical Applications Convenience stores Hotel lobbies Features Smart design with attractive white paint finish Bracket for wall or ceiling mounting M8 threaded holes for drop rod suspension Built-in electronic thermostat ( T suffix only) All models can be switched by CS-7 controller All models without built-in thermostat can be switched by CS-7 controller and/or an RST-IN or RST-TP thermostat CAT Important Note CA commercial air curtains produce higher decibels than the equivalent overdoor heaters. Please ensure that noise levels are acceptable before installing. Air Curtain Range and Prices Model kw Built-in Thermostat Length (mm) List Price CAS-30 3.0 No 635 295.00 CAS-30T 3.0 Yes 635 383.00 CAS-45 4.5 No 635 299.00 CAS-45T 4.5 Yes 635 377.00 CAD-60 6.0 No 1105 490.00 CAD-60T 6.0 Yes 1105 568.00 CAD-90 9.0 No 1105 526.00 CAD-90T 9.0 Yes 1105 604.00 CAT-90 9.0 No 1620 673.00 CAT-90T 9.0 Yes 1620 751.00 CAT-135 13.5 No 1620 699.00 CAT-135T 13.5 Yes 1620 776.00 Physical Data Models Dimensions (mm) Weight (kg) L D H CAS 635 108 225 8.5 CAD 1105 108 225 13.5 CAT 1105 108 225 19 36 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Performance Data Model kw Volts Airflow (m³/h) db*@2m Recommended Mounting Height (m) High Low Min Max CAS-30(T) 3 2 230 345 60 2.5 3.5 CAS-45(T) 4.5 2.25 230 345 60 2.5 3.5 CAD-60(T) 6 4 230 690 62 2.5 3.5 CAD-90(T) 9 4.5 230 690 62 2.5 3.5 CAT-90(T) 9 6 230 or 400/3N 1035 62 2.5 3.5 CAT-135(T) 13.5 6.75 230 or 400/3N 1035 62 2.5 3.5 *Noise levels are factory tested not laboratory tested Insects Air intake Warm air in Winter Typical air flow from a CA air curtain FAN ASSISTED HEATERS Pollution Cool air in Summer Control Options and Prices Type Description Model Details List Price Switch On/off/high heat/low heat/fan only CS-7 Page 79 62.00 Thermostat Adjustable thermostat (not for use with T suffix models) RST2-IN Page 74 76.00 Thermostat Tamperproof thermostat (not for use with T suffix models) RST-TP Page 73 82.00 FOR MULTI-HEATER SYSTEMS WE RECOMMEND OUR SYSTEM X - See PAGE 26 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 37

HCA High Capacity Air Curtain Provides an invisible barrier across entrances to commercial premises Reduces heating and air conditioning costs Minimises ingress of pollutants FAN ASSISTED HEATERS Typical Applications Large shops Offices Hospitals Hotels Features Attractive, sturdy design Wall mounting plate supplied as standard HCA air curtains reduce heating costs Four M6 threaded holes for drop rod suspension Control box provided with every air curtain offering high and low settings for airflow and heat Air Curtain Range and Prices Model kw (high setting) Length (mm) List Price HCA-09 9.0 1113 1279.00 HCA-13 13.5 1621 1504.00 HCA-18 18.0 2121 1907.00 Physical Data Model Dimensions (mm) Weight (kg) L D H HCA-09 1113 265 254 19.6 HCA-13 1621 265 254 25.4 HCA-18 2121 265 254 31.9 Performance Data Model Volts kw Airflow (m³/h) db* @ 3m Recommended Mounting Height (m) High Low High Low Min Max HCA-09 400/3N 9.0 4.5 1879 1444 66 2.5 4.0 HCA-13 400/3N 13.5 6.75 2617 2441 71 2.5 4.0 HCA-18 400/3N 18.0 9.0 4100 3834 68 2.5 4.0 *Noise levels are factory tested not laboratory tested Optional Thermostats and Prices Description Model Details List Price Standard room thermostat RST2-IN Page 74 76.00 Tamperproof thermostat RST-TP Page 73 82.00 Thermostats are connected to the control box and will control heat output while the fan operates continuously. Control box supplied as standard Important Note. For an HCA air curtain to provide an effective air barrier, a high air velocity is required. The resulting noise output must be considered. For this reason, we do not recommend HCA air curtains for smaller shops or where people are working in close proximity to the entrance. 38 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Pair of 18kW air curtains mounted above automatic sliding doors in a supermarket FAN ASSISTED HEATERS An air curtain looking the part in a prestige London office building HCA air curtains reducing heating costs in a DIY store HCA air curtain suspended from drop rods web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 39

OUH2 Industrial Fan Heaters FAN ASSISTED HEATERS An effective means of heating industrial premises Extremely robust UK manufactured heaters Exceptional reliability backed by a 5 year warranty Typical applications Warehouses Workshops Factories Features FIVE YEAR WARRNTY Heavy gauge steel construction Bracket provided with every heater for wall or ceiling mounting Suitable for vertical suspension hooks provided as standard Built-in temperature control thermostat Optional control switch providing on/off/fan only settings A number of heaters can be controlled from a single point Auto-reset over-temperature protection and heat purge device to clear residual heat 5 OUH2 Unit Heater Robust, Rugged, Reliable Heater Range and Prices Model kw List Price OUH2-03 3.0 680.00 OUH2-05 5.0 700.00 OUH2-07 7.5 720.00 OUH2-10 10 740.00 OUH2-15 15 1110.00 OUH2-20 20 1180.00 OUH2-25 25 1250.00 Physical Data kw Dimensions (mm) Weight W D H (kg) 3 to 10 435 405 320 18 15 to 25 565 485 445 37 Built to last an OUH industrial fan heater is covered by a 5-year warranty 40 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Not sure whether that s the Batmobile but it s definitely kept warm by a BN Thermic heater Performance Data Model kw Volts Airflow db*@ 2m (m³/h) OUH2-03 3.0 230V or 400/3N 1100 60 OUH2-05 5.0 230V or 400/3N 1100 60 OUH2-07 7.5 230V or 400/3N 1100 60 OUH2-10 10 400V/3N 1100 60 OUH2-15 15 400V/3N 3150 62 OUH2-20 20 400V/3N 3150 62 OUH2-25 25 400V/3N 3150 62 *Noise levels are factory tested not laboratory tested FAN ASSISTED HEATERS OUH2 Unit Heater suspended using hooks provided Where roof height exceeds 4m we recommend using our DSU Destratification units see page 43 25kW industrial fan heater installed in an automotive parts store Control Options and Prices Type Description Model Details List Price Switch On/off/fan only settings OUH2-S Page 80 55.00 Timer Programmable PROTIM-7 Page 78 120.00 Thermostat Frost protection (overrides heater s built-in thermostat) FST2-IN Page 74 70.00 No neutral, 440V and 480V versions available - contact BN Thermic Continued... web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 41

OUH2 Industrial Fan Heaters Continued Mounting Options FAN ASSISTED HEATERS OUH2-S control switch fitted to a heater. Can be wall mounted if preferred A Typical Control Group The group can be a combination of any models from the OUH2 range FOR MULTI-HEATER SYSTEMS WE RECOMMEND OUR SYSTEM X - See PAGE 26 42 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

DSU Destratification Units Reducing heating bills by up to 30% by recycling warm air that has collected at high level. Recommended for industrial premises where roof height exceeds 4m Typical Applications Warehouses Exhibition Halls Ideally suited for use in conjunction with BN Thermic s OUH2 industrial fan heaters Features Reduces energy costs when roof Reduces heating costs by up to 30% height exceeds 4m Heavy duty steel construction Built-in thermostat automatically energises fan 4-way adjustable louvers Suspension kit supplied as standard (4 x 500mm chains and associated hooks) FAN ASSISTED HEATERS Specification and Prices Model Volts Airflow (m³/h) Fan Motor (W) Dimensions (mm) Roof height (m) Area Covered (m) db* at 5m Weight (kg) List Price H W D DSU-4 230 4000 200 385 560 560 4 to 7 20 x 20 45 18 703.00 DSU-8 230 8000 250 385 720 720 7 to 12 25 x 25 50 24 847.00 *Noise levels are factory tested not laboratory tested. Warehouse Example Without DSU Warm air accumulates at high level Destratification unit reducing heating bills in a Cumbrian auction house With DSU Warm air is recycled reducing heating costs by up to 30% Top view of DSU-8 showing powerful fan web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 43

PH Pew Heaters new PH65 CONVECTION HEATERS PH45 PH30 PH Series - ideal for unobtrusive installation under a church pew An economic means of heating a church congregation Minimal pre-heating required ensuring low running costs Visually unobtrusive Features Robust all-steel construction Dark brown paint finish Fixed directly to a pew s backboard or mounted on floor or suspension brackets 20mm cable knockouts at both ends for electrical connection External guard not required Heater Range and Prices Model Length (mm) kw List Price PH30 525 0.3 88.00 PH45 702 0.45 104.00 PH65 948 0.65 116.00 PH Pew heater installed under a church pew PHF optional floor brackets Heater Technical Data Model kw Volts Dimensions (mm) Weight (kg) L D H PH30 0.3 230 525 58 168 2.5 PH45 0.45 230 702 58 168 3.2 PH65 0.65 230 948 58 168 4.2 PHB optional suspension brackets 44 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Optional Brackets (for pews without backboards) Type Description Model List Price Bracket Floor (pair) assembled height 204mm PHF 18.00 Bracket Suspension (pair) assembled height 325mm PHB 21.00 Pew Heater Section Table Space Between Seat Supports (mm) Minimum Maximum Recommended Heater 600 750 PH30 750 1000 PH45 1000 1500 PH65 1500+ Multiple Heaters Spaces between seat supports CONVECTION HEATERS Pew heaters fitted directly to pew backboards Pew heater installed using floor brackets suspension brackets are also available web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 45

SWD Industrial Finned Tubular Heaters CONVECTION HEATERS Ideal for damp and corrosive environments Suitable for hose-down washing Designed for long life in the most demanding conditions Features Welded stainless steel construction Built-in adjustable thermostat (SWD-A models only) Brackets for wall or floor mounting supplied as standard Waterproof glass fibre terminal box IP66 rated M20 cable gland supplied as standard Optional zinc plated wire guards available (recommended when personnel have access to the heater) SWD Industrial Finned Tubular Heater ideal for damp and corrosive environments Heater Range and Prices Model kw Volts Built-in Thermostat List Price SWD-A-500 0.5 230V Yes 361.00 SWD-A-1000 1.0 230V Yes 412.00 SWD-A-1500 1.5 230V Yes 497.00 SWD-A-2000 2.0 230V Yes 538.00 SWD-A-3000 3.0 230V Yes 703.00 SWD-U-500 0.5 230V No 266.00 SWD-U-1000 1.0 230V or 400V/3 No 327.00 SWD-U-1500 1.5 230V or 400V/3 No 383.00 SWD-U-2000 2.0 230V or 400V/3 No 444.00 SWD-U-3000 3.0 230V or 400V/3 No 605.00 SWD-U-4000 4.0 230V or 400V/3 No 826.00 SWD-U-500-1 0.5 110V No 295.00 SWD-U-1000-1 1.0 110V No 360.00 SWD-U-1500-1 1.5 110V No 421.00 SWD-A with externally adjustable thermostat Heater Technical Data kw Dimensions (mm) Weight (kg) Optional L W H Guard 0.5 440 130 170 3.0 SWG-1 1.0 640 130 170 4.8 SWG-2 1.5 840 130 170 6.2 SWG-3 2.0 1040 130 170 7.7 SWG-3 3.0 1440 130 170 10.9 SWG-4 4.0 1840 130 170 13.7 SWG-5 SWD-U standard format 46 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Optional Guard Range and Prices Model List Price SWG-1 64.00 SWG-2 72.00 SWG-3 84.00 SWG-4 135.00 SWG-5 140.00 Optional Guard Technical Data Model Dimensions (mm) Weight L W H (kg) SWG-1 450 240 240 1.0 SWG-2 650 240 240 1.5 SWG-3 1075 240 240 2.0 SWG-4 1600 240 240 3.5 SWG-5 1900 240 240 4.0 SWD mounted under SWG Guard An SWD guard is recommended when personnel have access to the heaters CONVECTION HEATERS SWD heaters can be floor mounted or wall mounted using the brackets provided A wall-mounted heater installed under a robust wire guard web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 47

TX Explosion-Proof Tubular Heaters CONVECTION HEATERS ATEX Certified for use in Hazardous Areas Suitable for Zone 1 and Zone 2 areas (gas) and Zone 21 and Zone 22 areas (dusts) Typical applications Spray shops Petrochemical installations Storage areas where hazardous gases or dusts may be present Features ATEX Certified Equipment protection level Gb (gas) and Db (dust) Certified for Zones 1, 2, 21 and 22 Groups IIC (gas) and IIIC (dust) Temperature Class T3 (maximum ambient 40 C) IP66 rating Steel construction with grey epoxy finish Sturdy mounting feet for wall or floor mounting Optional galvanised steel mesh safety guard Also available (consult BN Thermic) T4 models Alternative outputs up to 2.4kW Alternative voltages including 3 phase Low and high ambient temperature models Stainless steel construction Heater Range and Prices Model kw List Price TXT3-04 0.4 928.00 TXT3-05* 0.5 950.00 TXT3-10* 1.0 1110.00 TXT3-15* 1.5 1210.00 TXT3-20 2.0 1396.00 TXST-01 ATEX approved thermostat for use with hazardous gases *Generally available from stock 48 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Heater Specifications Model kw Dimensions (mm) Weight Optional Guard L H W (kg) TXT3-04 0.4 650 157 100 10.0 TXG-01 TXT3-05* 0.5 850 157 100 11.5 TXG-01 TXT3-10* 1.0 1450 157 100 16.0 TXG-02 TXT3-15* 1.5 2050 157 100 19.5 TXG-01 + TXG-02 TXT3-20 2.0 2650 157 100 24.5 2 x TXG-02 Guards TXG guards are recommended for installations where personnel have access to heaters. The guards are open ended allowing more than one guard to be used to protect a single heater. Guards Model Length List Price TXG-01 730mm 49.00 TXG-02 1330mm 57.00 Thermostat Options and Prices CONVECTION HEATERS Description Model Details List Price ATEX thermostat (hazardous gas only) ATEX thermostat (hazardous dust and gas) TXST-01 Page 74 549.00 TXST-02 Page 74 994.00 TXST-02 ATEX approved thermostat for use with hazardous gases and dusts TX ATEX approved heaters installed in a hazardous area web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 49

BLS 110V Low Level Convector Heaters CONVECTION HEATERS For use where only 110V supply is available Provides comfort or background heat Low running costs Typical Applications Site huts Space heating in a wide variety of commercial and industrial premises Features Robust steel construction with central baffle plate to promote convection currents Long life metal sheathed finned heating element Auto-reset over-temperature protection Built-in thermostat with external knob allowing easy adjustment of temperature set-point BLS-110-1000T 110V robust convector heater ideal for site huts Price Model List Price BLS-110-1000T 155.00 Heater Technical Data kw Volts Dimensions (mm) Weight (kg) L D H 1.0 110 1206 62 148 6.0 We have a heater for almost every heating application Please call our technical sales team for help with heater selection 50 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Magic Lamp Introducing the REVOLUTIONARY... BN Thermic halogen heaters and patio heaters are now available with the brand-new Magic Lamp. These heaters are true shortwave halogen heaters, and will perform as such, but produce a barely perceptible pink glow. RADIANT HEATERS Magic Lamp heaters are perfect for any installation which requires instant, direct heat but where significant light output cannot be tolerated. Typical applications: Churches Dining areas Sports facilities Show rooms Studios Animal enclosures Magic Lamp Patio Heaters can be seen on page 54 Gentle pink glow from a Magic Lamp Magic Lamp Halogen Heaters can be seen on page 58 Heaters using the Magic Lamp should not be confused with medium-wave low glow heaters. Magic lamp heaters emit shortwave energy which can travel several metres without losing intensity or being affected by draughts and breezes. web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 51

ETH 'All Black' Radiant Heater RADIANT HEATERS Provides direct comfort heat without light output Ideally suited to dining areas Typical Applications Commercial and domestic installations Dining areas Lunch counters Bars Conservatories Orangeries 'All Black' Radiant Heater smart modern design Features Sophisticated all black design IP44 rated Radiant heat with no light output Wall mounting bracket with up and down angle adjustment supplied as standard Suitable for suspension (multi-heater brackets available) Pre-wired 2m high temperature cable Heater Range and Prices Model kw List Price ETH-10 1.0 270.00 ETH-15 1.5 316.00 'All Black' heaters are ideal for suspension above dining areas Technical Specification Model kw Volts Dimensions(mm) Weight (kg) H W D ETH-10 1.0kw 230 140 1080 45 4.0 ETH-15 1.5kW 230 140 1580 45 6.0 Control Options and Prices Description Model Details List Price Push Button Timer (3kW max) TS-6 Page 78 95.00 Push Button Timer (6kW max) TS-5 Page 78 145.00 ETH heaters installed indoors in a Norfolk sports club 52 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Optional Multi-Heater Brackets Description Model List Price Brackets for 2 heaters (suspend or wall-mount) ETH-B2 69.00 Brackets for 3 heaters (suspend or wall mount) ETH-B3 92.00 Brackets for suspending or wall-mounting 2 and 3 heaters RADIANT HEATERS Two heaters suspended using a ETH-B2 bracket in a sheltered dining area 'All Black' heaters mounted above a bar in London's Waterloo Station web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 53

HWP2 Patio Heater RADIANT HEATERS Safe, instant outdoor heating Equally suitable for commercial or domestic installations Can be installed outdoors and left outdoors all year round Typical Applications Patios both commercial and domestic Pub gardens Pavement cafes Golf driving ranges Nightclub queuing areas Smoking areas Features IP55 rated for outdoor use equally suited to indoor applications Aluminium construction with stainless steel safety grille Stylish design with choice of black, white or silver paint finish High quality replaceable halogen lamp with an average 7000 hours operating life Wall mounting bracket with up and down angle adjustment supplied as standard Parasol clamp supplied as standard with single lamp heaters Suitable for suspension Pre-wired 3m high temperature cable HWP2-B HWP2-S HWP2-W HWP2-2B HWP2-2W HWP2-3B HWP2-3W HWP2-45B Instant comfort heat in a gazebo 2kW patio heaters keeping golfers warm at a driving range 54 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Optional Accessories and Prices Description Model Details List Price Dimmer (3kW max) VR-2 Page 81 112.00 Push Button Timer TS-6 Page 78 95.00 (3kW max) Push Button Timer TS-5 Page 78 145.00 (6kW max) Movement Sensor WH-402 Page 80 89.00 A 3kW heater suspended A Battersea bistro providing a warm outdoor dining area RADIANT HEATERS Heater Range and Prices Model kw Finish Lamp Glow List Price HWP2-B 1.5 Black Gold 141.00 HWP2-BM 1.5 Black Magic Lamp (See page 51) 194.00 HWP2-W 1.5 White Gold 141.00 HWP2-WM 1.5 White Magic Lamp (See page 51) 194.00 HWP2-S 1.5 Silver Gold 141.00 HWP2-SM 1.5 Silver Magic Lamp (See page 51) 194.00 HWP2-2B 2.0 Black Red 173.00 HWP2-2BM 2.0 Black Magic Lamp (See page 51) 210.00 HWP2-2W 2.0 White Red 173.00 HWP2-2WM 2.0 White Magic Lamp (See page 51) 210.00 HWP2-3B 3.0 Black Red 253.00 HWP2-3W 3.0 White Red 253.00 HWP2-45B 4.5 Black Red 361.00 HWP2 Heaters now available in FORMAT All the performance of a true halogen heater but with the gentlest pink glow. See page 51 for full details. Continued... web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 55

HWP2 Patio Heaters Continued Area Coverage Wall mounted Wall Mounted kw H (m) X (m) Y (m) Z (m) Area (m²) 1.5 or 2kW 2.0 2.3 2.4 4.0 7.6 1.5 or 2kW 2.5 3.0 3.0 5.2 12.3 3.0 2.0 3.4 2.4 4.5 9.5 3.0 2.5 4.2 3.0 5.8 15.0 4.5 2.0 4.3 2.4 5.0 11.2 4.5 2.5 4.8 3.0 6.4 16.8 H Y X Z RADIANT HEATERS Area Coverage Overhead Mounted kw H (m) X (m) Y (m) Area (m²) 1.5 or 2kW 2.0 3.6 2.5 9.0 1.5 or 2kW 2.5 4.8 3.5 16.8 3.0 2.0 4.3 2.5 10.7 3.0 2.5 5.2 3.5 18.2 4.5 2.0 4.8 2.5 12.0 4.5 2.5 5.6 3.5 19.6 HWP2-S heaters providing instant heat in the smartest-looking smoking area we have ever seen! H Overhead mounted Technical Specification kw Volts Lamp Type Glow Dimensions(mm) Weight (kg) H W D 1.5kw 230 Frosted* Gold* 120 480 140 1.7 2kW 230 Gold Red 120 480 140 1.7 3kW 230 Gold Red 120 960 140 3.2 4.5kW 230/400 Gold Red 120 1440 140 4.9 * available in 'Magic Lamp' format (see page 55). Y X Lovely warm pub garden makes you want to stay for just one more! Instant heat all year round for East London hipsters! 56 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

new CM Heated Chandelier Top quality medieval style chandelier providing light and heat Heaters hidden inside chandelier ring for minimal visual impact Magic Lamp technology ensures that light output from the heaters is barely noticeable Typical Applications Churches Wedding Barns Banqueting Halls Features Robust steel construction with black paint finish Halogen heaters providing instant direct heat with barely discernible light output Heaters can be wired for 230V 1ph or 400V 3ph and neutral SES lamp holders (lamps by other maximum load 1kW) Separate circuit for heating and lighting Chains and ceiling rose supplied ceiling suspension chain 5m long CM3 Heated Chandelier - the light output from the three Magic Lamp heaters is barely noticeable RADIANT HEATERS Range and Prices Model Heater Output (kw) List Price CM3-4 4.5 2420.00 CM3-6 6.0 2470.00 CM4-6 6.0 3100.00 CM4-8 8.0 3160.00 CM4 Heated Chandelier fitted with four Magic Lamp heaters Selection Guide Heater Size Suggested Mounting Height Heated Area (approx) CM3 4m 5.5m dia CM4 5m 7m dia Technical Specification Model Total Heat Output (kw) No. Heaters No. Lamp Holders Diameter (mm) Height to Terminal Enclosure (mm) Weight (kg) CM3-4 4.5 3 9 2030 690 22 CM3-6 6.0 3 9 2030 690 22 CM4-6 6.0 4 12 2240 690 28 CM4-8 8.0 4 12 2240 690 28 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 57

HN Series Halogen Heaters Heats people rather than space Ideal for heating specific targets within an otherwise unheated building Instantly effective and therefore ideal for infrequently used buildings RADIANT HEATERS HN2-1500G or HN2-200G Halogen Heater Typical Applications Community halls Churches Workshops Packing areas Squash courts Factories Warehouses HN Heaters now available in FORMAT All the performance of a true halogen heater but with the gentlest pink glow. See page 51 for full details. Features Aluminium construction with safety grille HN2-3000G Halogen Heater High quality replaceable halogen lamp with an average 7000 hours operating life Wall mounting bracket with up and down and side to side' angle adjustment Gold lamp with pink/orange glow Pre-wired 1m high temperature cable (2 core and earth) Lamps on 2 and 3 lamp heaters can be switched individually using remote mounted switch Optional suspension kit available HN2-4500G or HN2-6000G Halogen Heater Rear view of HN2-3000G showing wall bracket and terminal enclosure 58 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Heater Range and Prices Model kw List Price HN2-1500G 1.5 159.00 HN2-1500M 1.5 205.00 HN2-2000G 2.0 169.00 HN2-2000M 2.0 215.00 HN2-3000G 3.0 245.00 HN2-3000M 3.0 327.00 HN2-4500G 4.5 396.00 HN2-4500M 4.5 500.00 HN2-6000G 6.0 444.00 HN2-6000M 6.0 552.00 Technical Specification Heaters with a 'G' suffix have gold (red glow) lamps. Heaters with 'M' suffix have Magic Lamps with an almost imperceptible pink glow (see page 51) kw Volts Dimensions(mm) Weight (kg) H W D 1.5kw/2kW 230 275 420 140 3.8 3kW 230 430 420 140 5.5 4.5kW/6kW 230/400 590 420 140 6.5 4.5kW halogen heater installed in a workshop spot heating is much cheaper than heating the entire building RADIANT HEATERS Each packing station has it s own magic lamp zero glare heater HN Halogen Heater heating a church in Market Harborough Continued... web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 59

HN Halogen Heaters Continued Wall Mounted H Table 1 - Select appropriate W/m² W/m required X Heavy Work Light Work Spot Heating Y Z Highly Insulated 150 200 250 Insulated 175 225 250 RADIANT HEATERS Un-Insulated 200 250 275 Light Cladding 250 300 300 Badly insulated/damp 300 300 300 Table 2 - Select heater type and mounting height HN2-1500G or HN2-2000G HN2-3000G HN2-4500G or HN2-6000G Wall Mounted (m) Area Covered Overhead Mounted (m) Area Covered H X Y Z (m²) H X Y (m²) 2.5 3.2 2.6 6.0 11.9 3.0 3.0 2.0 6.0 3.0 3.4 3.6 6.7 18.2 3.5 3.3 2.3 7.6 3.0 3.7 3.6 7.0 19.2 3.5 3.3 2.6 8.6 3.5 4.0 4.2 7.9 25.0 4.0 5.0 3.1 15.5 3.5 4.0 4.2 8.1 25.4 4.0 5.0 3.4 17.0 4.0 4.3 4.5 8.4 28.6 5.0 5.3 3.7 19.6 H Y X Overhead Mounted Optional Accessories Description Model Full Details List Price Suspension Kit HSK ---- 6.00 On/off switch for 1.5kW, 2kW CS-4 Page 79 39.00 and 3kW heaters Switch for 3kW heater: CS-2 Page 79 52.00 full/½ heat settings Switch for 4.5kW and 6kW CS-3 Page 79 71.00 heaters: full/⅔/⅓ heat settings Dimmer (3kW max) VR-2 Page 81 112.00 Push Button Timer (3kW max) TS-6 Page 78 95.00 Push Button Timer (6kW max) TS-5 Page 78 145.00 Movement Sensor (3kW max) WH-402 Page 81 89.00 Three phase halogen heaters providing instant heat above industrial sewing machines For multi-heater control see page 61-62 60 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

MC1 Halogen Heater Control Box An MC1 control box provides variable output control for a group of BN Thermic s HN2 halogen heaters from a single point. This approach allows the intensity of heat to be adjusted by means of a simple wall-mounted switch enhancing comfort and improving economy. Each system must incorporate one primary control box and a wall-mounted switch (either CS-2 or CS-3 depending on the heaters being controlled). For larger installations additional secondary control boxes (MC1-S) will be required. Control Box Range and Prices Model Primary/ Secondary Halogen Heaters Controlled Max No. Heaters List Price MC1-P-L2 Primary 2 lamp 6 624.00 MC1-S-L2 Secondary 2 lamp 6 559.00 MC1-P Primary 3 lamp 4 624.00 MC1-S Secondary 3 lamp 4 559.00 Switch Range and Prices Model Suitable for Details List Price CS-2 MC1-P-L2 Page 79 52.00 CS-3 MC1-P Page 79 71.00 RADIANT HEATERS Controlling HN2-3000G (3kW) Heaters each with 2 lamps Each MC1-P-L2 will control up to six heaters. The CS-2 switch allows the heaters lamps to be switched individually meaning that outputs of 1.5kW or 3kW can be selected. CS-2 Wall Mounted Switch MC1-P-L2 MC1-S-L2 Primary Control Box controlling up to six heaters Secondary Control Box each controlling up to six heaters A selection of optional additional control devices WH-402 Movement Sensor CS-5 Push Button (activates rundown timer) CS-6 Master Control Button For larger installations up to eleven secondary control boxes can be connected in a control daisy chain with each controlling up to six additional heaters. FST2-IN Frost Thermostat Continued... web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 61

MC1 Halogen Heater Control Box Continued Controlling HN2-4500G (4.5kW) Heaters or HN2-6000G (6kW) Heaters each with 3 lamps Each MC1-P will control up to four heaters. The CS-3 switch allows the heaters lamps to be switched individually meaning that outputs of 1/3, 2/3 or full power can be selected. RADIANT HEATERS CS-3 Wall Mounted Switch MC1-P Primary Control Box controlling up to four heaters MC1-S Secondary Control Box each controlling up to four heaters WH-402 Movement Sensor A selection of optional additional control devices CS-5 Push Button (activates rundown timer) CS-6 Master Control Button FST2-IN Frost Thermostat For larger installations up to eleven secondary control boxes can be connected in a control daisy chain with each controlling up to four additional heaters. Two MC-1 control boxes providing variable heat control in a Norfolk church Optional additional control devices and prices Type Description Model Details List Price Thermostat Frost protection overrides switch and other control FST2-IN Page 74 70.00 devices Thermostat Prevents heaters being energised above set-point RST2-IN Page 74 76.00 (standard model) Thermostat Prevents heaters being energised above set-point RST-TP Page 73 82.00 (tamperproof model) Timer Programmable timer PROTIM-7 Page 78 120.00 Movement Sensor Prevents unoccupied area from being heated WH-402 Page 81 89.00 Push Button Triggers control boxes built-in run down timer (preset CS-5 Page 80 38.00 between 5 secs and 18 minutes) Master Control Button Switches the system off overriding everything but frost thermostat CS-6 Page 80 40.00 62 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

ESP Radiant Cassettes An extremely economic means of heating large commercial spaces Attractive unobtrusive design well suited to modern facilities High mounting positions allows flexible use of floor and wall space Typical Applications Community halls Sports halls Showrooms Food Halls Squash courts Features Radiant heat without light output Robust steel case with white epoxy finish Specially treated aluminium heat emitter Ceiling mounting brackets supplied as standard (these brackets also provide suspension points) Optional angle adjustable wall brackets available The ESP range providing an economic means of heating large areas Radiant cassettes are ideally suited to squash courts Heater Range and Prices Model kw List Price ESP2-09 0.9 276.00 ESP2-12 1.2 284.00 ESP2-18 1.8 392.00 ESP2-24 2.4 416.00 ESP2-30 3.0 556.00 ESP2-36 3.6 560.00 ESP2-B (optional wall bracket - pair) 31.00 RADIANT HEATERS Radiant Cassettes proving an economic means of heating a community hall Continued... web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 63

RADIANT HEATERS ESP Radiant Cassettes Continued Energy Saving ESP Radiant Cassettes are our most economic heaters for buildings with high roofs for the following reasons: The gentle radiant effect means that the experienced temperature can be up to 4 C warmer than the actual air temperature. This means that the thermostat can be set up to 4 C lower. The temperature gradient is negligible. Typically air temperature will increase by 0.3 C per metre above floor level. This figure compares to a typical 2.5 C per metre when using fan heaters. Height above floor level Approx Air Temp 6m 18.5 C 5m 18.2 C 4m 17.9 C 3m 17.6 C 2m 17.3 C 1m 17 C Heating a building using ESP Radiant Cassettes Height above floor level Approx Air Temp 6m 32.5 C 5m 30 C 4m 27.5 C 3m 25 C 2m 22.5 C 1m 20 C Heating a large building using fan heaters Energy saving heating in a Brighton theatre BN Thermic radiant cassettes keep customers warm in this Essex taproom 64 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

ESP2 radiant cassettes are ideal for modern industrial applications such as this glass-printing shop RADIANT HEATERS Technical Specification Model kw Volts Dimensions(mm) Recommended Mounting Height (m) Weight H W D Min Max (kg) ESP2-09 0.9 230 60 1550 150 3.0 8.0 5.8 ESP2-12 1.2 230 60 1550 150 3.0 8.0 5.8 ESP2-18 1.8 230 60 1550 250 3.5 8.0 9.9 ESP2-24 2.4 230 60 1550 250 3.5 8.0 9.9 ESP2-30 3.0 230/400 60 1550 350 3.5 8.0 13.9 ESP2-36 3.6 230/400 60 1550 350 3.5 8.0 13.9 Control Options and Prices Type Description Model Details List Price Thermostat Hard Case tamperproof HC-T2 Page 75 165.00 Thermostat Hard Case tamperproof with temperature set-back HC-ST2 Page 75 194.00 Thermostat Tamperproof tool for Hard Case thermostats HC-D Page 75 22.00 Timer Programmable PROTIM-7 Page 78 120.00 Contactor 32A 3-pole CON-32 Page 81 36.00 Contactor 50A 3-pole CON-50 Page 81 48.00 Contactor 80A 3-pole CON-80 Page 81 89.00 Contactor Enclosure for CON-32 and CON-50 ENCL-D Page 81 19.00 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 65

RP Radiant Ceiling Panels RADIANT HEATERS A sophisticated means of heating commercial premises Very safe as personnel have no access to heaters High mounting positions allows flexible use of floor and wall space Typical Applications Offices Trade counters Care homes Meeting rooms Features Radiant heat without light output Specifically designed for quick and easy installation into a suspended ceiling grid Fitted with a bracket for easy mounting onto a conventional ceiling Attractive white easy-clean finish Mounting height up to 4m RP-03 provides an almost invisible source of gentle radiant heat Energy Saving RP Ceiling Panels are a more economic means of heating commercial premises than conventional heating systems. The gentle radiant effect means that the experienced temperature can be up to 4 C warmer than the actual air temperature. This means that the thermostat can be set up to 4 C lower. The temperature gradient is negligible. Typically air temperature will increase by 0.3 C per metre above floor level. This figure compares to a typical 2.5 C per metre when using fan heaters. Heater Range and Prices Model kw List Price RP-03 0.3 154.00 RP-06 0.6 212.00 Technical Specification Model kw Volts Dimensions(mm) Weight H W D (kg) RP-03 0.3 230 25 595 595 5 RP-06 0.6 230 25 1195 595 10 RP radiant panels in a changing room making best use of available space 66 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

RADIANT HEATERS RP radiant panels ceiling mounted in a cricket pavilion RP-06 radiant panels providing an economic and stylish means of heating a flying school in Sussex Radiant ceiling panel providing an almost invisible source of heat in a hospital corridor Control Options and Prices Type Description Model Details List Price Thermostat Standard RST2-IN Page 74 76.00 Thermostat Tamperproof RST-TP Page 73 82.00 Thermostat Programmable PROSTAT2 Page 73 95.00 Timer Programmable PROTIM-7 Page 78 120.00 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 67

CH Ceramic Heaters Heats people rather than space Direct radiant heating without light output Virtually instant heat ideally suited to irregularly used premises RADIANT HEATERS Typical Applications Community halls Workshops Kennels Zoos Features Aluminium construction with safety grille Long life no glow ceramic heat emitters Wall mounting bracket with up and down and side to side' angle adjustment 1m high temperature cable CH-3000 3kW Ceramic Heater providing directional radiant heat without light output CH-1500 1.5kW Ceramic Heater a few minutes after switching on Heater Range and Prices Model kw List Price CH-1500 1.5 142.00 CH-3000 3.0 243.00 Technical Specification kw Volts Dimensions(mm) Weight (kg) H W D 1.5kw 230 190 405 72 1.8 3kW 230 345 405 72 2.8 A 3kW ceramic heater provides localised heating for visitors to a London craft centre 68 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Control Options and Prices Description Model Details List Price Dimmer (3kW max) VR-2 Page 81 112.00 Push Button Timer TS-6 Page 78 95.00 Movement Sensor WH-402 Page 81 89.00 Spot the Iguana! RADIANT HEATERS CH-1500 Ceramic heater providing warmth in a fisherman's cafe Ceramic heater keeping a flower seller warm at a London station web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 69

RL Replacement Infrared Lamps Please note, we have only listed current BN Thermic heaters. However, we can usually provide replacement lamps for older models as well. Please call us to discuss your replacement lamp requirements. Standard Lamps All lamps 230V 230mm flexible leads with fork terminals Length including ceramic SK15 ceramic caps: 353mm Lamp length RADIANT HEATERS Model kw Colour List Price Each BN Thermic heater Quantity fitted to heater RL15GF 1.5 Gold 56.00 HN2-1500G 1 HN2-3000G 2 HN2-4500G 3 RL15MF 1.5 Silver 94.00 HN2-1500M 1 HN2-3000M 2 HN2-4500M 3 RL20GF 2.0 Gold 53.00 HN2-2000G 1 HN2-6000G 3 RL20MF 2.0 Silver 94.00 HN2-2000M 1 HN2-6000M 3 Lead length Colour options Gold Silver (Magic Lamp) Fork terminal Weatherproof Lamps (for use in patio heaters) IP55 rated All lamps 230V Overall lamp length: 440mm Flexible tails with plain ferrules Lead length Lamp length Colour options Clear Gold Silver (Magic Lamp) Model kw Colour Lead length (mm) List Price Each BN Thermic heater Quantity fitted to heater RL15CW 1.5 Frosted 375 41.00 HWP2-B/W/S 1 RL15GW 1.5 Gold 375 54.00 HWP2-45B 1 (centre lamp) RL15MW 1.5 Silver 375 96.00 HWP2-BM/WM/ 1 SM RL15GW/3 1.5 Gold 200 & 600 54.00 HWP2-3B/W 2 RL15GW/4 1.5 Gold 430 & 905 54.00 HWP2-45B 2 (outside lamps) RL20GW 2.0 Gold 375 54.00 HWP2-2B/W 1 RL20MW 2.0 Silver 375 96.00 HWP2-2BM/WM 1 Light Output Lamp Colour Glow Gold Red Silver Magic Lamp with barely discernible glow (see page 51) Frosted Gold 70 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

CONTROLS Thermostats A16C - Manual thermostat Application Underfloor heating Adjustable Range +5 C to +30 C (manual adjustment) Mounting Recessed into a single-gang back box Sensors Integral air sensor with floor sensor supplied as standard Switching capacity 15A 230V Voltage supply 230V Contacts Single pole, single throw Dimensions 82mm (H) x 78mm (W) x 17mm (D) - when installed Ingress protection IP20 Special features Manual on/off switch Can be configured for air and floor sensor or floor sensor only List Price 72.00 U16C - Programmable thermostat Application Adjustable Range Mounting Programming Periods Sensors Switching capacity Voltage supply Contacts Dimensions Ingress protection Special Features Underfloor heating +5 C to +30 C Recessed into a single-gang back box 7-day/4 per day Integral air sensor with floor sensor supplied as standard 15A 230V 230V Single pole, single throw 82mm (H) x 78mm (W) x 17mm (D) - when installed IP20 Can be configured for air and floor sensor or floor sensor only Back-lit screen Summer switch (switches off heating but retains programme) List Price 82.00 CONTROLS T16R optional IP65 air sensor T16C - Touchscreen programmable thermostat Application Adjustable Range Mounting Programming Periods Sensors Switching capacity Voltage supply Contacts Dimensions Ingress protection Special Features Underfloor heating +5 C to +34 C Recessed into a single-gang back box 7-day with no restriction of number of events per day Integral air sensor with floor sensor supplied as standard 16A 230V 230V Single pole, single throw 90mm (H) x 90mm (W) x 18mm (D) - when installed IP21 Available in white, black or silver Can be configured for air and floor sensor or floor sensor only Screen colour can be changed Built-in energy use monitor Can be used with remote, wall mounted air sensor model T16R (IP65) List Prices T16CW (white): 107.00 T16CB (black): 114.00 T16CS (silver): 114.00 T16R (optional remote air sensor): 14.30 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 71

CONTROLS Thermostats - Continued S16C Smart Thermostat CONTROLS Application App Enabled Adjustable Range Mounting Programmed Periods Sensors Switching Capacity Contacts Ingress protection Dimensions Finish Special Feature Underfloor heating and general space heating Android (4.0 or later) and ios (8.0 or later) +5 C to +35 C Recessed into a single-gang black box 5+1+1 days/6 per day Integral air sensor with floor sensor supplied as standard 16A 230V Single pole single-throw IP30 86mm (H) x 130mm (W) x 18mm (D) - when installed S16CW choice of white or brushed chrome S16CB choice of black or black with chrome detail Adjustable screen brightness Automatic screen dimming with adjustable timing List price S16CW (white/chrome): 204.00 S16CB (black): 204.00 WST-1 - Wireless thermostat Application Underfloor heating and general commercial and domestic heating Use with WSB-1 relay boxes Adjustable Range +5 C to +37 C Mounting Surface mount or rest on stand provided Programming Periods Weekly in 30 minute periods Sensor Integral air sensor Voltage supply 2 x AAA batteries (provided) Number of WSB-1 relay 4 maximum boxes controlled Ingress protection IP30 Special Features Keyboard lock function Low battery indication Frost protection (holiday) mode Temporary override when used with WSP-1 wireless central programmer List Price 93.00 WSB-1 - Wireless relay box Application Use with Mounting Sensor Switching capacity Voltage supply Contacts Dimensions Ingress Protection Special features Underfloor heating and general commercial and domestic heating WST-1 wireless thermostat Recessed into a single-gang back box Floor probe (when used with underfloor heating) 16A 230V 230V List Price 87.00 Single pole, single throw 90mm (H) x 90mm (W) x 24mm (D) - when installed IP20 (see special features) Ingress protecting improved to IP21 when clip provided is fitted 72 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

WSP-1 - Wireless central programmer new Application Underfloor heating and general commercial and domestic heating Use with WST-1 wireless thermostat and WSB-1 wireless relay boxes Adjustable Range +5 C to +37 C Mounting Recessed into a single-gang back box Programming Periods 7-day with no restriction of number of events per day Voltage supply 230V Dimensions 90mm (H) x 90mm (W) x 18mm (D) - when installed Number of heating 24 maximum zones controlled Ingress protection IP21 Special Features Individual zones (rooms) can be renamed and numbered Frost protection (holiday) mode Energy use monitor List price 198.00 PROSTAT2 - Programmable thermostat Application Programmable temperature control in commercial premises Programming 7 day or 5 + 2 days Adjustable Range +5 C to +35 C Mounting Surface Switching capacity 6A 230V Voltage supply 2 x AA batteries (supplied) Contacts Single pole, change over Dimensions 127mm x 81mm x 28mm Ingress protection IP30 Special features Up to 6 programmable events per day Temporary temperature override until next pre-set period Temperature lock permanent temperature override until reset Delayed start, optimum start, optimum stop options List price 95.00 CONTROLS RST-TP - Tamperproof thermostat Application Commercial heating Adjustable Range +5 C to +25 C Mounting Surface Switching capacity 20A 230V Voltage supply 230V Contacts Single pole, single throw Dimensions 85mm x 85mm x 35mm Ingress protection IP30 Special features Concealed temperature adjustment Optional shear-off cover fixing screws Heat anticipator improves control accuracy List price 82.00 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 73

RST2-IN - Standard room thermostat Application Commercial heating Adjustable Range +5 C to +30 C Mounting Surface Switching capacity 20A 230V Voltage supply 230V Contacts Single pole, change over Dimensions 85mm x 85mm x 35mm Ingress protection IP30 Special features Heat anticipator improves control accuracy Price 76.00 RST-HT High Temperature Room Thermostat CONTROLS new Application Commercial and industrial heater control Adjustable Range +5 C to +50 C Mounting Surface mount Switching Capacity 16A 230V Voltage Supply None required Contacts Single pole, single throw Dimensions 125mm x 125mm x 75mm Ingress Protection IP65 List Price 98.00 FST2-IN - Frost thermostat (indoor) Application Frost protection Adjustable Range -15 C to +10 C Mounting Surface Switching capacity 20A 230V Voltage supply 230V Contacts Single pole, change over Dimensions 85mm x 85mm x 35mm Ingress protection IP30 Special features Heat anticipator improves control accuracy List price 70.00 FST2-EX - Frost thermostat (outdoor) Application Frost protection Adjustable Range -15 C to +10 C Mounting Surface Switching capacity 20A 230V Voltage supply 230V Contacts Single pole, change over Dimensions 125mm x 125mm x 75mm Ingress protection IP65 Special features Heat anticipator improves control accuracy List Price 132.00 74 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

HC-T2 - Hard Case thermostat Application Heating control in industrial and public areas Adjustable range 12 C to 25 C (comfort) 0 C to 12 C (frost protection) Use internal dip switch to select range Differential Adjustable 0.25 C to 5 C Accuracy To within +/- 0.5 C Mounting Surface Switching capacity 16A 230V Voltage supply 230V Contacts Single pole, changeover Dimensions 120mm x 95mm x 57mm Case Die-cast aluminium Sensor Side mounted black sensor (option of IP55 rated remote mounted sensor HC-S2) Thermostat ingress protection IP30 when installed Special features Tamperproof design requiring HC-D tool to access Vandal resistant List prices Thermostat (HC-T2): 165.00 Tamperproof tool (HC-D): 22.00 Optional remote sensor (HC-S2): 44.00 CONTROLS HC-ST2 - Hard Case thermostat with set-back HC-S2 optional IP55 remote mounted air sensor HC-D tamperproof tool Application Heating control in industrial and public areas Adjustable range 12 C to 25 C (comfort) Adjustable set-back Up to 20 C below comfort setting Indication Set-back operation: Blue LED (default mode) Comfort operation: red LED Comfort selection Side mounted button activating built-in run-down timer (adjustable up to 7.5 hours) OR Remote device such as PROTIM-7 programmable timer Differential Adjustable 0.25 C to 5 C Accuracy To within +/- 0.5 C Mounting Surface Switching capacity 16A 230V Voltage supply 230V Contacts Single pole, changeover Dimensions 120mm x 95mm x 57mm Case Die-cast aluminium Sensor Side mounted black sensor (option of IP55 rated remote mounted sensor HC-S2) Thermostat ingress protection IP30 when installed Special features Tamperproof design requiring HC-D tool to access Vandal resistant List prices Thermostat (HC-ST2): 194.00 Tamperproof tool (HC-D): 22.00 Optional remote sensor (HC-S2): 44.00 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 75

CONTROLS Thermostats - Continued TXST-01 - ATEX Thermostat (hazardous gases only) CONTROLS Approval ATEX Equipment Protection Level Gb (gas) Zones Zones 1 and 2 (gas) Group Group IIC Temperature Class T6 Adjustable Range 0 to +40 C Differential 4 C (+/- 2 C) Temperature Sensing Bulb and Capillary (stainless steel) Cable Entries 2 x M20 Enclosure Material Cast aluminium with black anodised finish Mounting plate material Powder coated steel Switching Capacity 16A 230V resistive load Contacts Single pole double throw (changeover) Ingress protection IP66 Dimensions 210mm (w) x 300mm (h) x 91mm (d) Weight 5kg List Price 549.00 TXST-02 - ATEX Thermostat (hazardous gases and dusts) Approval ATEX Equipment Protection Level Gb (gas) Db (dust) Zones Zones 1 and 2 (gas) Zones 21 and 22 (dust) Group Group IIC (gas) Group IIIC (dust) Temperature Class T6 Adjustable Range -20 to +40 C Temperature Sensing Stainless steel 316Ti capillary Cable Entries 2 x M20 Certified Cable Glands M20 x 1.5 with clamping range Ø 6-13mm M20 x 1.5 with clamping range Ø 7-17mm Enclosure Material Black polyester Switching Capacity 16A 230V resistive load (break on rise/heating) 6A 230V resistive load (make on rise/cooling) Contacts Single pole double throw (changeover) Ingress protection IP65 Dimensions 200mm (w) x 106mm (h) x 90mm (d) Weight 1.2kg List price 994.00 76 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

THT Weatherproof capillary thermostat new Application Control for pipe trace heating Adjustable Range +5 C to +50 C Mounting Surface mount or use THB pipe bracket (see page 17) Switching Capacity 16A 230V Voltage Supply None required Contacts Single pole, single throw Dimensions 125mm x 125mm x 75mm Capillary Length 600mm approx. (including bulb) Ingress Protection IP65 List Price 93.00 new THTEX ATEX weatherproof capillary thermostat Application Control for pipe trace heating in hazardous areas Equipment Protection Level Gb (gas) Zones Zones 1 and 2 (gas) Group IIC Temperature Class T6 Adjustable Range 0 C to +40 C Mounting Surface mount or use THB pipe bracket (see page 17) Switching Capacity 16A 230V Voltage Supply None required Contacts Single pole, double throw (changeover) Dimensions 130mm x 130mm x 90mm Capillary Length 1600mm approx. (including bulb) Cable Entries 2 x M20 Ingress Protection IP55 List Price 480.00 CONTROLS web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 77

CONTROLS Timers TS-5 - Push button timer 6kW CONTROLS Application Mounting Time delay Switching capacity Voltage supply Contacts Dimensions Ingress protection Special features Soft start switching List price 145.00 Ideal for controlling halogen heaters including patio heaters Surface 5 minutes to 70 minutes 6kW 230V (250W minimum) 230V Single pole, single throw 110mm x 168mm x 80mm IP55 Can be used in conjunction with a programmable timer and/or a thermostat TS-6 - Push button timer - 3kW Application Mounting Time delay Switching capacity Voltage supply Contacts Dimensions Ingress protection Special features Ideal for controlling halogen heaters including patio heaters Surface 2 minutes to 2 hours 16A 230V 230V Single pole, single throw 85mm x 85mm x 67mm IP66 Touch activated Blue light indicates heating off Red light indicates 1minute operation remaining List price 95.00 PROTIM-7 - Programmable timer Application Programming Mounting Maximum events per day Switching Capacity Voltage Supply Dimensions Ingress Protection Special Features Ideal for use with a variety of commercial and industrial heating schemes 7day, 5 + 2 days or 24hour Surface 4 13A 230V (not recommended for direct switching of halogen heaters) 230V 90 x 115 x 57mm IP30 Advance to next programme Boost (select 1 hour or 2 hours) Override permanently on or permanently off Automatic summer update Battery back up Tough aluminium case List price 120.00 78 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

CONTROLS Switches CS-7 - Three gang switch for fan heater control For use with 800 Series SCHG RH SMH CA Settings On/off/high heat/low heat/fan only (summer use) Voltage supply 230V Mounting Surface Dimensions 148 x 88 x 45mm Ingress protection IP30 List price 62.00 CS-2 - Two gang switch for halogen heater control CONTROLS For use with HN2-3000G/M Settings Full heat/½ heat Voltage supply 230V Mounting Surface Dimensions 85 x 85 x 48mm Ingress protection IP30 List price 52.00 CS-3 - Three gang switch for halogen heater control For use with HN2-4500G/M HN2-6000G Settings Full heat/⅔ heat/⅓ heat Voltage supply 230V Mounting Surface Dimensions 146 x 85 x 48mm Ingress protection IP30 List price 71.00 CS-4 - Single gang DP switch for halogen heater control For use with HN2-1500G/M HN2-2000G HN2-3000G/M Settings On/off Voltage supply 230V Mounting Surface Dimensions 85 x 85 x 48mm Ingress protection IP30 List price 39.00 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 79

CONTROLS Switches - Continued CS-5 - Push button For use with MC1 halogen control box Function Triggers MC1 s built-in run-down timer (pre-set between 10 minutes and 140 minutes) Voltage supply 230V Mounting Surface Dimensions 85 x 85 x 48mm Ingress protection IP30 List price 38.00 CONTROLS CS-6 - Master Switch For use with MC1 halogen control box Function Switches system on and off overrides all controls except frost thermostat Voltage supply 230V Mounting Surface Dimensions 85 x 85 x 48mm Ingress protection IP30 List price 40.00 OUH2-S Switch for OUH2 industrial fan heater control For use with Any heater or group of heaters from the OUH2 range Settings On/off/fan only (summer use) Voltage supply 230V Mounting Remote surface mounting or mounted onto an OUH2 heater Dimensions 85 x 85 x 48mm Ingress protection IP30 List Price 55.00 80 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

CONTROLS Miscellaneous Controls WH-402 - Movement sensor Application Ideal for use with halogen heaters including patio heaters Mounting Surface Switching capacity 16A 230V Voltage supply 230V Sensing range 12m/180 (both distance and angle can be reduced) Time delay 5 seconds to 18 minutes (adjustable) Dimensions 65mm x 83mm x 115mm Ingress protection IP55 List price 89.00 VR-2 - Dimmer Application Ideal for use with halogen heaters including patio heaters Mounting Surface Output adjustment 30% to 100% Switching capacity 13A 230V (halogen heaters up to 3kW) Voltage supply 230V Contacts Single pole, single throw Dimensions 115mm x 90mm x 58m Ingress protection IP55 Special features Definite click to off List price 112.00 CONTROLS Contactors CON-32 Model Poles Amps per Pole Max kw per Pole @230V List price CON-32 3 32 7 36.00 CON-50 3 50 11.5 48.00 CON-80 3 80 18 89.00 ENCL-D Enclosure for CON-32 and CON-50: 175mm x 125mm x 175mm high 19.00 ENCL-D Enclosure CON-50 CON-80 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 81

CONTROLS SystemX CX1 - Controller with thermostat CONTROLS CX1 with thermostat CX2 with tamper resistant thermostat For use with Maximum number of heaters controlled Thermostat range Settings Connection to first heater Mounting Dimensions All heaters in System X range in any sequence 12 0 to 30 C on/off/high heat/low heat/fan only (summer use) Cat5 cable Surface 120mm x 80 x 40mm List price 132.00 CX2 - Controller with tamper resistant thermostat As CX1 except Thermostat is tamper resistant List price 134.00 CX3 without thermostat CX3 - Controller without thermostat As CX1 except Without built-in thermostat List price 124.00 CX6 - Programmable Controller new CX6 Programmable Controller As CX1 except 7 day or 5 + 2 days programming Up to 6 programmable events per day Temporary temperature override until next pre-set period Temporary lock permanent temperature override until reset Optimum start for enhanced economy (user selectable) List price 182.00 CXS - Optional Remote Sensor CXS optional remote sensor for CX1 or CX2 Can be used with CX1 CX2 CX6 When connected overrides built-in sensor List price 30.00 82 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

CASE STUDIES Here are a few projects we have been involved with over the last couple of years. In most cases, we provided a bespoke heating scheme which usually required a site visit. If you would like us to help with your next heating project, just give us a call. St Giles Church - Medbourne 17 x 3kW Halogen Heaters Direct heating was provided by 17 halogen heaters mounted at 3m above floor level. Because halogen heaters are instantly effective, virtually no pre-heating is required and heating costs have been kept to an absolute minimum. CASE STUDIES For this type of project, heater selection and positioning are of paramount importance. BN Thermic engineers are always available to discuss your requirements The Original Factory Shop Llandudno Bay 11 x 4.5kW Surface Mount Ceiling Fan Heaters 6 x 4.5kW Ceiling Grid Fan Heaters 1 x 6kW Overdoor Heater Ceiling heaters were selected for this large two-story retail unit allowing free use of floor and wall space. Where a suspended ceiling had been installed, the heaters could be mounted into the ceiling grid itself. In other areas, we used low-profile surface-mount heaters. The scheme was completed with a 6kW overdoor heater to provide a warm welcome for customers web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 83

CASE STUDIES - Continued McLaren Workshop West Sussex 3 x Industrial Fan Heaters 2 x Destratification Units This is a large workshop housing a spectacular array of McLaren sports cars. Three industrial fan heaters were installed to maintain a comfortable working temperature for the mechanics during working hours and a background heat to protect the valuable vehicles at other times. A provision was also made for the heaters fans to be switched on in summer months for additional air circulation. CASE STUDIES Two destratification units were installed to enhance economy. These devices are suspended from the roof and recirculate warm air that would otherwise accumulate at high level. It is estimated that the use of destratification units reduces heating bills by approximately 30%. Joules Distribution Centre - Corby 53 x 1.5kW halogen Heaters (Magic Lamp) This distribution centre is far too large to consider installing a conventional heating system. However, there was a requirement to provide instant, direct heat to 53 individual packing stations. BN Thermic surveyed the site and recommended 1.5kW halogen heaters using the latest Magic Lamp technology. These heaters provide all the performance associated with conventional halogen heaters but with the light output reduced to a barely discernible glimmer. 84 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Waterloo Station - London 23 x All Black Radiant Heaters The new restaurant and bar facility at Waterloo Station is very stylish and the heaters installed above tables and counters had to match the décor. The sleek modern lines of our all black radiant heaters fitted the bill perfectly. CASE STUDIES Village Hall - Farnham 4 x 2.4kW Radiant Cassettes Radiant cassettes are generally our preferred method of heating village halls and community halls. Their high mounting position allows free use of wall and floor space whilst their noise and draught free operation ensures that the heaters will not interfere with activities such as meetings and coffee mornings. Farnham Village Hall has a fairly low ceiling, allowing the cassettes to be ceiling mounted. In halls with higher ceilings, cassettes are often suspended. For optimum comfort and economy, the correct selection and positioning of radiant cassettes is critical. As was the case at Farnham, a BN Thermic engineer is always available to carry out a free of charge and no obligation survey. Top Golf - Watford 86 x 2kW Black Patio Heaters Top Golf is a terrific facility combining a golf driving range and a lively bar and restaurant. As the golfers wait for their turn to have a few swings, they sit at a high table enjoying waitress service from the bar. Our job was to provide comfort heating that would be effective even on the chilliest of evening. This was achieved by mounting a 2kW patio heater either side of each table. The heaters are fully effective even on a breezy night and economy is ensured by means of time delay control. web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 85

CASE STUDIES - Continued Bourne House (Serviced and Managed Offices) - Whyteleafe 4 x 1.5kW Silver Patio Heaters 30m² Snow and Ice Meting Cable CASE STUDIES Bourne House recently underwent a major renovation, with work carried out to the very highest standard. Our part in this renovation was to provide heating for an outdoor meeting and smoking area. We specified and supplied heating cable to be installed under the paving slabs. The cable is automatically switched on when there is a risk of snow or ice accumulation thus ensuring safe underfoot conditions. BN Thermic patio heaters were also installed. These stylish silver heaters match the décor of the area perfectly and provide instant, direct heat. The heaters are controlled by movement sensors which keep running costs to a minimum. Spencer Squash Club - Wandsworth 4 x 3.6kW Radiant Cassettes This is a friendly and well-run squash club in South London. The club management contacted us to discuss an economic means of heating their two courts which would not interfere with squash matches or other activities such as mother and toddler groups. We recommended our radiant cassettes. These heaters are mounted at high level and operate silently. They do not produce light output or draughts and are easy to control with a programmable thermostat. School of Dance Croxley 4 x 4.5kW Halogen Heaters 1 x Control Panel Because this relatively large rehearsal space is only used intermittently, conventional space heating was considered to be uneconomic. As an alternative, the school directors were looking for a system that would be instantly effective thus eliminating the need for preheating. The solution was to suspend a grid of four halogen heater from the ceiling. The positioning of the heaters was carefully considered to ensure an even distribution of the radiant effect and control was provided by BN Thermic s MC1 control panel which provides an easy means of adjusting heat intensity. 86 web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432

Wagner Hall Theatre - Brighton 9 x 3kW Radiant Cassettes A theatre requires a heating system that is fast acting but does not in any way interfere with performances. This means that heaters producing noise or light are specifically excluded. At Wagner Hall, we deigned a scheme using a grid of six radiant cassettes mounted onto cross beams at high level, augmented by a run of three heaters mounted onto the rear wall using angle-adjustable brackets. Derby Country FC 60 x 3kW Halogen Heaters 10 x Control Panels The management at Derby County were aware that sales from their concourse concessions were suffering because the areas were too cold during the winter months. The concourses are open to the pitch and to the outside world meaning that conventional space heating was impractical. The solution was to provide a grid of halogen heaters at high level, providing instant, direct heat to the Pride Park faithful. A control system was also devised which allowed the stadium manager to adjust heating levels. CASE STUDIES All Saints Church - East Huntspill 45 x Pew Heaters All Saints is a lovely little Somerset parish church. After a site visit, BN Thermic designed a heating scheme using a total of 45 pew heaters. The heaters sit snuggly under the pew seats and with their dark brown paint finish are virtually invisible. Pew heaters are generally the most popular means of church heating not just because they are visually unobtrusive but also because they require virtually no warm up time and are noise and draught free. web www.bnthermic.co.uk email sales@bnthermic.co.uk tel 01293 547361 fax 01293 531432 87

the brand promise We provide heating systems for just about every commercial and industrial application We are experts in underfloor heating and carry vast stocks Friendly experienced staff are always available to provide technical assistance We offer a free design service We carry out free of charge and no obligation site visits throughout the UK Next day delivery is available for almost all products How to Order BN Thermic products can be ordered from almost all UK electrical wholesalers Visit www.bnthermic.co.uk or call us for details of a wholesaler in your area This price list shows list prices call your preferred wholesaler for your trade price Contact us for technical advice, free designs or detailed quotations BN Thermic Ltd 34 Stephenson Way Crawley West Sussex RH10 1TN Find us on Tel 01293 547361 Fax 01293 531432 Email sales@bnthermic.co.uk Web www.bnthermic.co.uk