LED Panel Light E830J Light Emission Technology www.lightemissiontech.com High energy efficiency 20W LED panel light Luminous update 1700Lm High power factor Over temperature protection High uniformity High quality light with a colour rendering index of 80 Product Offering Type reference Wattage CCT Luminous Beam Angle E830J-20-830-160S 20W 3000K 1500Lm 160 E830J-20-840-160S 20W 4000K 1700Lm 160 E830J-20-850-160S 20W 5000K 1750Lm 160 1.Key Features and Benefits 20W LED lamp as high quality 300*300mm Side glowing LED panel light AC100~277V/ 50 60Hz input voltage 160 beam angle Non Dimmable Available in three different colour temperatures: 3000K warm white 4000K neutral white 5000K cool white Other Colours ¹ LED panel light with High uniformity High colour consistency (standard deviation colour matching <5) Shock proof and vibration proof 40,000 hours lifetime UV and NIR radiation free Mercury free 3 years Light Emission Technology Guarantee and Lifetime technical support ¹ Demand for other colours,please land on www.lightemissiontech.com, we can do more for you!
2. Common Characteristics ² Average Starting Switching cycles Warm up time Working Tc temperature Mercury lifetime ³ time (30s on,30s off) THD for 60% light Conditions max ⁴ max 40, 000H 0.02s 1,000, 000 <15% None 20 ~ 35 70 0.0mg Nominal current Power LED Brand Length Width Thickness Weight⁵ Input voltage (AC100V/60HZ) Power factor SAMSUNG 297mm 297mm 12mm 1250g AC100~277V 300mA max 20W >0.9 3. Characteristic Range ² standard deviation Type reference Luminous flux CRI CCT colour matching Beam angle E830J-20-830-160S 1500Lm 83 3045+175K <5 160 E830J-20-840-160S 1700Lm 82 3985+275K <5 160 E830J-20-850-160S 1750Lm 80 5028+283K <5 160 *The product maintains a tolerance of +10% on flux, +5% on CCT measurements and +2 on CRI measurements. 4. Mounting Information ² Typical values, measured @ 120VAC/60HZ,230VAC/50HZ All the technical parameters apply to the entire lamp. In view of the complex manufacturing process for LED, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual parameters of an individual product; individual products may vary from the typical values. ³ The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical lamps goes below 70% of its initial luminous flux(l70b50,iec60969).the lifetime is estimated open lamps at room (Ta=25 ),free air burning, base up burning position and at rated voltage. ⁴ The Tc is defined as the highest permissible temperature which may occur on the outer surface of the LED lamp under normal operating conditions and at the rated voltage/current/power or the maximum of the rated voltage/current/power range. ⁵ The tolerance of the product weight is +5%.
5. Intensity⁶ (Light Distribution Graph) Unit:cd Average intensity spread angle (10%):161.2deg 6. Photometric 3000K / 160 5500K / 160 Throw Distance Illuminance Illuminance 1m 523Lux 496Lux 2m 130.5Lux 124Lux 3m 58Lux 55Lux * The data is for samsung 5630 LED. 7.Uniformity Unit: x 1000Lux 6. Photometri ⁶ Center intensity spread angle(50%):half beam angle; Center intensity spread angle(10%):full beam angle.
8. Disposal Information WEEE lamps can be returned at specific collection points. LED panel light have to be disposed as special waste. 9. Application Information Applications Conference, Meeting room lighting Home and hospital lighting Hotel lighting School, College & University lighting Factory & Office lighting Industrial and commercial area lighting Applications Notes Risk of electric shock use in dry location only Can not be used for outdoor applications Input voltage:ac100v~277v Operating temperature: 20 ~35 Storage temperature: 30 ~60 This device is not intended for use with emergency exits 10.Connection diagram 11. Installation instructions Supply with no fixtures, you can DIY the steel wire for fixing. Supply with specific fixtures. *The fixtures need to be charged additionally, it depends on your choice. SSL LED Lamps
12. Packaging Information⁷ Lamp Type Dimension (mm) Gross Weight (kg) Net Weight (kg) Qty/Carton E830J-20-XXX-160S 400*355*270 9.5 7.5 6 13. Ordering Guide E830 J 20 8 40 160 S 300*300mm Side glowing panel light Voltage J:100 277V Wattage 20:20W CRI 8:80 CCT 30: 3045+175K; 40: 3985+275K; 50: 5028+283K; Beam Angle 160: 160 Housing Finish S: silver 14. Special Announcement Before using, please inspect electrical connections and the used voltage is the same as the voltage marked on the LED panel light. The product is subject to any technical improvement in the future without the prior notice. Any change in the appearance and color of the product shall be subject to the real object. ⁷ The Packaging of the product weight is +5%. Light Emission Technology, Ltd. 4/F, Midstar Technology Building, 3 Road Liuxian, 68 Zone, BaoAn District, Shen Zhen, China. 518101 Tel: +86-755-29641619 Fax: +86-755-29641700 www.lightemissiontech.com, service@lightemissiontech.com 2013 Light Emission Technology, Ltd. All rights reserved.01/01