Ships and marine technology - Protective coatings and inspection method Part 5: Assessment method for coating damages

International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. CD registered Period from 01 September to 30 September 2012 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. TC 8 ISO/CD 16145-5 TC 22 ISO/DTS 21609 TC 23 ISO/CD 11001-1 TC 38 ISO/CD 13629-2 TC 44 Ships and marine technology Ships and marine technology - Protective coatings and inspection method Part 5: Assessment method for coating damages Road vehicles Road vehicles (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment Tractors and machinery for agriculture and forestry Agricultural wheeled tractors and implements Three-point hitch couplers Part 1: U-frame coupler Textiles Determination of antifungal axctivity of textile products Part 2: Plate count method Welding and allied processes ISO/CD 17777 Welding consumables Covered electrodes for manual metal arc welding of copper and copper alloys Classification TC 58 ISO/CD 17519 TC 61 ISO/CD 13927 TC 67 ISO/CD 18462 TC 68 Gas cylinders Gas Cylinders Refillable Permanently Mounted Composite Tubes for Transportation Plastics Plastics Simple heat release test using a conical radiant heater and a thermopile detector Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries Thermal Well Casing Connection Evaluation Protocol Financial services

ISO/CD 9362 TC 71 ISO/CD 13315-2 TC 91 ISO/CD 17280 ISO/CD 17293-1 ISO/CD 17293-2 TC 102 ISO/CD 16742 TC 108 ISO 5349-2:2001/CD Amd 1 TC 121 ISO/CD 18835 ISO/CD 80601-2-72 TC 131 ISO/CD 3320 TC 138 ISO/CD 7509 TC 142 ISO/CD 16170 TC 172 ISO/CD 17411 TC 178 ISO/DTR 14799-1 ISO/DTR 14799-2 TC 221 ISO/CD 18325 TC 228 Banking Banking telecommunication messages Business identifier code (BIC) Concrete, reinforced concrete and pre-stressed concrete Environmental management for concrete and concrete structures Part 2: System boundary and inventory data Surface active agents Surface active agents Determination of the 1,4-dioxane content in surfactants by GC Surface active agents Determination of chloroacetic acid (chloroacetate) in surfactants Part 1: HPLC method Surface active agents Determination of chloroacetic acid (chloroacetate) in surfactants Part 2: Ionic Chromatographic method Iron ore and direct reduced iron Iron ores Sampling of slurries Mechanical vibration, shock and condition monitoring Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace Amendment 1 Anaesthetic and respiratory equipment Inhalational anaesthesia systems Draw-over vaporizers and associated equipment Medical electrical equipment Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients Fluid power systems Fluid power systems and components Cylinder bores and piston rod diameters Metric series Plastics pipes, fittings and valves for the transport of fluids Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes Determination of time to failure under sustained internal pressure Cleaning equipment for air and other gases In situ test methods for very high efficiency filter systems in industrial facilities Optics and photonics Optics and photonics Optical materials and components Test method for homogeneity of optical glasses by laser interferometry Lifts, escalators and moving walks Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison Comparison of worldwide escalator and moving walk safety standards Part 2: Abbreviated comparison and comments Geosynthetics Geosynthetics Index test method for the determination of discharge capacity of prefabricated vertical drains Tourism and related services ISO/CD 18065 Natural Protected Areas - Tourist services for public use provided by Natural Protected Areas Authorities - Requirements TC 248 ISO/CD 13065 Project committee: Sustainability criteria for bioenergy Sustainability criteria for bioenergy

TC 261 ISO/CD 17296-3 JTC 1 ISO/IEC CD 38500 ISO/IEC CD 29157 ISO/IEC CD 23008-1 ISO/IEC CD 19785-1 Additive manufacturing Additive manufacturing Rapid technologies (rapid prototyping) Part 3: Test methods Information technology Corporate governance of information technology Information technology Telecommunications and information exchange between systems PHY/MAC specifications for short-range wireless low-rate applications in the ISM band Information technology High efficiency coding and media delivery in heterogeneous environments Part 1: MPEG media transport (MMT) Information technology Common Biometric Exchange Formats Framework Part 1: Data element specification ISO/IEC CD 24779-1 Information technology - Cross jurisdictional and societal aspects of implementation of biometric technologies - Pictograms, icons and symbols for use with biometric systems Part 1: General principles ISO/IEC CD 24779-2 Information technology - Cross jurisdictional and societal aspects of implementation of biometric technologies - Pictograms, icons and symbols for use with biometric systems Part 2: Fingerprint applications ISO/IEC CD 24779-3 Information Technology - Crossjurisdictional and societal aspects of implementation of biometric technologies - Pictograms, Icons and Symbols for use with Biometric Systems Part 3: Vascular applications DIS circulated Period from 01 September to 30 September 2012 These documents have obtained substantial support within the appropriate ISO technical committee. They have been submitted to the ISO member bodies for voting by the date shown. * Available in English only Vote terminates TC 1 Screw threads ISO/DIS 16239 * Metric series wires for measuring screw threads 2012-12-19 TC 6 Paper, board and pulps ISO/DIS 16065-1 * Pulps Determination of fibre length by automated optical analysis Part 1: Polarized light method 2012-12-12 (Revision of ISO 16065-1:2001) ISO/DIS 16065-2 * Pulps Determination of fibre length by automated optical analysis Part 2: Unpolarized light method 2012-12-12 (Revision of ISO 16065-2:2007) ISO/DIS 23714 * Pulps Determination of water retention value (WRV) 2012-12-12 (Revision of ISO 23714:2007) TC 8 Ships and marine technology

ISO/DIS 28005-1 * Security management systems for the supply chain Electr onic port clearance (EPC) Part 1: Message structures 2012-12-10 (Revision of ISO/PAS 28005-1:2012) ISO/DIS 16304 * Ships and marine technology Marine environment protection Arrangement and management of port waste reception facilities 2012-12-27 TC 20 Aircraft and space vehicles ISO/DIS 16290 * Definition of the Technology Readiness Levels (TRL) and their criteria of assessment 2012-12-27 TC 22 Road vehicles ISO/DIS 14229-6 * Road vehicles Unified diagnostic services (UDS) Part 6: UDS on K-Line implementation (UDSonK-Line) ISO/DIS 19072-2 * Road vehicles Connection interface for pyrotechnic devices, two-way and three-way connections Part 2: Test methods and general performance requirements 2012-12-27 2012-12-26 (Revision of ISO 19072-2:2007) ISO/DIS 17479 * Motorcycles Measurement methods for gaseous exhaust emissions during inspection or maintenance 2012-12-19 TC 23 Tractors and machinery for agriculture and forestry ISO/DIS 16399 * Meters for irrigation water 2012-12-18 (Revision of ISO/CD 16399-2, ISO/CD 16399-3) ISO/DIS 11783-10 * Tractors and machinery for agriculture and forestry Serial control and communications data network Part 10: Task controller and management information system data interchange 2012-12-07 (Revision of ISO 11783-10:2009, ISO 11783-10:2009/CD Amd 1) TC 29 Small tools ISO/DIS 8404 * Tools for moulding Angle pins 2012-12-18 (Revision of ISO 8404:2003) ISO/DIS 8405 * Tools for moulding Ejector sleeves with cylindrical head Basic series for general purposes 2012-12-18 (Revision of ISO 8405:1998) ISO/DIS 23481 * Tools for pressing Cam driver plates 2012-12-18 (Revision of ISO 23481:2008) TC 31 Tyres, rims and valves ISO/DIS 4000-2 * Passenger car tyres and rims Part 2: Rims 2012-12-10 (Revision of ISO 4000-2:2007) TC 34 Food products ISO/DIS 11816-1 * Milk and milk products Determination of alkaline phosphatase activity Part 1: Fluorimetric method for milk and milk-based drinks 2013-02-07 (Revision of ISO 11816-1:2006) ISO 17372:2008/DAmd 1 * Animal feeding stuffs Determination of zearalenone by immunoaffinity column chromatography and high performance liquid chromatography Amend. 1 2012-12-10 ISO/DIS 12228-2 * Determination of individual and total sterols contents Gas chromatographic method Part 2: Olive and olive pomace oils 2013-02-21 (Revision of ISO 12228:1999) ISO 11056:1999/DAmd 1 TC 35 * Sensory analysis Methodology Magnitude estimation method Amendment 1 2012-12-14 Paints and varnishes

ISO/DIS 2813 * Paints and varnishes Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees 2013-02-28 (Revision of ISO 2813:1994, ISO 2813:1994/Cor 1:1997) ISO/DIS 13803 * Paints and varnishes Determination of reflection haze on paint films at 20 degrees 2013-02-28 (Revision of ISO 13803:2000) TC 42 Photography ISO/DIS 18939 * Imaging materials Digital hard copy for medical imaging Methods of measuring permanence 2012-12-18 TC 45 Rubber and rubber products ISO/DIS 27126 * Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals Specification ISO/DIS 27127 * Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas Specification 2012-12-07 2012-12-07 TC 58 Gas cylinders ISO/DIS 14246.2 * Gas cylinders Cylinder valves Manufacturing tests and examinations 2012-11-14 (Revision of ISO 14246:2001) TC 69 Applications of statistical methods ISO/DIS 3534-4 * Statistics Vocabulary and symbols Part 4: Survey sampling 2012-12-26 TC 85 Nuclear energy, nuclear technologies, and radiological protection ISO/ASTM DIS 51702 * Practice for dosimetry in a gamma irradiation facility for radiation processing 2012-12-27 (Revision of ISO/ASTM 51702:2004) ISO/ASTM DIS 51940 * Guide for dosimetry for sterile insects release programs 2012-12-27 (Revision of ISO/ASTM 51940:2004) ISO/DIS 11665-9 * Measurement of radioactivity in the environment Air: radon-222 Part 9: Method for determining exhalation rate of dense building materials 2012-12-14 TC 92 Fire safety ISO/DIS 834-10 * Fire resistance tests Elements of building construction Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural elements ISO/DIS 834-11 * Fire resistance tests Elements of building construction Part 11: Specific requirements for the assessment of fire protection to structural steel elements 2012-12-28 2012-12-28 TC 94 Personal safety -- Protective clothing and equipment ISO/DIS 11613-1 * Protective clothing for firefighters Laboratory test methods and performance requirements Part 1: General 2012-12-26 (Revision of ISO 11613:1999) ISO/DIS 11613-2 * Protective clothing for firefighters Laboratory test methods and performance requirements Part 2: Compatibility 2012-12-19 (Revision of ISO 11613:1999) ISO/DIS 11613-3 * Protective clothing for firefighters Laboratory test methods and performance requirements Part 3: Clothing 2012-12-26 (Revision of ISO 11613:1999) ISO/DIS 11613-4 * Protective clothing for firefighters Laboratory test methods and performance requirements Part 4: Gloves 2012-12-19 ISO/DIS 16900-11.2 * Respiratory protective devices Methods of test and test equipment Part 11: Determination 2012-11-25

of field of vision TC 107 Metallic and other inorganic coatings ISO/DIS 14919 * Thermal spraying Wires, rods and cords for flame and arc spraying Classification Technical supply conditions 2013-02-14 (Revision of ISO 14919:2001) TC 110 Industrial trucks ISO/DIS 22915-16 * Industrial trucks Verification of stability Part 16: Pedestrian-propelled trucks 2012-12-28 TC 121 IEC 60601-1- 10:2007/DAmd 1 TC 126 Anaesthetic and respiratory equipment Medical electrical equipment Part 1-10: General requirements for basic safety and essential performance Collateral standard: Requirements for the development of physiologic closedloop controllers Amendment 1 Tobacco and tobacco products 2013-01-12 ISO/DIS 8243 * Cigarettes Sampling 2012-12-19 (Revision of ISO 8243:2006) TC 138 Plastics pipes, fittings and valves for the transport of fluids ISO/DIS 4437-1 * Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) Part 1: General 2012-12-17 (Revision of ISO 4437:2007) ISO/DIS 4437-2 * Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) Part 2: Pipes 2012-12-17 (Revision of ISO 4437:2007) ISO/DIS 4437-3 * Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) Part 3: Fittings 2012-12-17 (Revision of ISO 8085-1:2001, ISO 8085-2:2001, ISO 8085-3:2001, ISO 4437:2007) ISO/DIS 4437-5 * Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) Part 5: Fitness for purpose 2012-12-17 (Revision of ISO 4437:2007) TC 146 Air quality ISO/DIS 17734-1 * Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry Part 1: Isocyanates using dibutylamine derivatives 2012-12-25 (Revision of ISO 17734-1:2006) ISO/DIS 17734-2 * Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry Part 2: Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives 2012-12-25 (Revision of ISO 17734-2:2006) TC 176 Quality management and quality assurance ISO/DIS 18091 * Quality management systems Guidelines for the application of ISO 9001:2008 in local government 2012-12-28 (Revision of IWA 4:2009) TC 190 Soil quality ISO/DIS 11267 * Soil quality Inhibition of reproduction of Collembola (Folsomia candida) by soil pollutants 2013-02-07 (Revision of ISO 11267:1999) TC 197 Hydrogen technologies ISO/DIS 15399 * Gaseous hydrogen - Cylinders and tubes for stationary storage 2012-12-28

TC 198 Sterilization of health care products ISO/DIS 11135.2 * Sterilization of health-care products Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices 2012-11-21 (Revision of ISO 11135-1:2007, ISO/TS 11135-2:2008) TC 210 IEC 62366:2007/DAmd 1 TC 213 Quality management and corresponding general aspects for medical devices Medical devices Application of usability engineering to medical devices Amendment 1 2013-01-12 Dimensional and geometrical product specifications and verification ISO/DIS 14638 * Geometrical product specifications (GPS) Masterplan 2013-02-17 (Revision of ISO/TR 14638:1995) TC 238 Solid biofuels ISO/DIS 17225-1 * Solid biofuels Fuel specifications and classes Part 1: General requirements 2013-02-28 ISO/DIS 17225-2 * Solid biofuels Fuel specifications and classes Part 2: Graded wood pellets 2013-02-28 ISO/DIS 17225-3 * Solid biofuels Fuel specifications and classes Part 3: Graded wood briquettes 2013-02-28 ISO/DIS 17225-4 * Solid biofuels Fuel specifications and classes Part 4: Graded wood chips 2013-02-28 ISO/DIS 17225-5 * Solid biofuels Fuel specifications and classes Part 5: Graded firewood 2013-02-28 ISO/DIS 17225-6 * Solid biofuels Fuel specifications and classes Part 6: Graded non-woody pellets 2013-02-28 ISO/DIS 17225-7 * Solid biofuels Fuel specifications and classes Part 7: Graded non-woody briquettes 2013-02-28 JTC 1 Information technology ISO/IEC DIS 18450 * Web Services Description Language (WSDL) for CSTA Phase III 2012-12-19 ISO/IEC/IEEE DIS 29119-3.2 * Software and systems engineering Software testing Part 3: Test documentation 2012-11-06 ISO 9660:1988/DAmd 1 * Information processing Volume and file structure of CD-ROM for information interchange Amendment 1 2012-12-21 ISO/IEC DIS 29147 * Information technology - Security techniques - Vulnerability disclosure 2012-12-26 ISO/IEC DIS 29142-1 * Print Cartridge Characterization Part 1: General: terms, symbols, notations and cartridge characterization framework 2012-12-14 ISO/IEC DIS 29142-2 * Print Cartridge Characterization Part 2: Cartridge Characterization Data Reporting 2012-12-14 ISO/IEC DIS 9995-9 * Information technology Keyboard layouts for text and office systems Part 9: Multilingualusage, multiscript keyboard group layouts 2012-12-24 FDIS circulated

Period from 01 September to 30 September 2012 These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown * Available in English only TC 2 Fasteners Vote terminates ISO/FDIS 898-1 * Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs with specified property classes Coarse thread and fine pitch thread 2012-12-14 (Revision of ISO 898-1:2009, ISO 898-1:2009/DAmd 1) TC 4 Rolling bearings ISO/FDIS 3228 * Rolling bearings Cast and pressed housings for insert bearings Boundary dimensions and tolerances 2012-11-29 (Revision of ISO 3228:1993) TC 6 ISO/FDIS 12625-11 TC 17 Paper, board and pulps * Tissue paper and tissue products Part 11: Determination of wet ball burst strength 2012-11-21 Steel ISO/FDIS 7452 * Hot-rolled steel plates Tolerances on dimensions and shape 2012-11-29 (Revision of ISO 7452:2002) ISO/FDIS 13270 * Steel fibres for concrete Definitions and specifications 2012-11-29 TC 20 Aircraft and space vehicles ISO/FDIS 26871 * Space systems Explosive systems and devices 2012-11-13 TC 21 Equipment for fire protection and fire fighting ISO/FDIS 7240-23 * Fire detection and alarm systems Part 23: Visual alarm devices 2012-11-29 ISO/FDIS 6182-2 * Fire protection Automatic sprinkler systems Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms 2012-11-13 (Revision of ISO 6182-2:2005) ISO/FDIS 6182-3 * Fire protection Automatic sprinkler systems Part 3: Requirements and test methods for dry pipe valves (Revision of ISO 6182-3:2005) ISO/FDIS 6182-5 * Fire protection Automatic sprinkler systems Part 5: Requirements and test methods for deluge valves (Revision of ISO 6182-5:2006) TC 22 Road vehicles ISO/FDIS 14229-1 * Road vehicles Unified diagnostic services (UDS) Part 1: Specification and requirements 2012-11-04 (Revision of ISO 14229-1:2006) ISO/FDIS 14229-2 * Road vehicles Unified diagnostic services (UDS) Part 2: Session layer services 2012-11-04 ISO/FDIS 18542-1 * Road vehicles Standardized repair and maintenance information (RMI) terminology Part 1: General information and use case definition 2012-11-07 ISO 11486:2006/FDAm d 1 * Motorcycles Methods for setting running resistance on a chassis dynamometer Amendment 1 2012-11-15

TC 23 Tractors and machinery for agriculture and forestry ISO/FDIS 16438 * Agricultural irrigation equipment Thermoplastic collapsible hoses for irrigation Specifications and test methods 2012-11-07 TC 31 Tyres, rims and valves ISO/FDIS 4000-1 * Passenger car tyres and rims Part 1: Tyres (metric series) 2012-11-29 (Revision of ISO 4000-1:2010) TC 33 Refractories ISO/FDIS 1927-2 * Monolithic (unshaped) refractory products Part 2: Sampling for testing 2012-11-14 ISO/FDIS 1927-3 * Monolithic (unshaped) refractory products Part 3: Characterization as received 2012-11-14 ISO/FDIS 1927-4 * Monolithic (unshaped) refractory products Part 4: Determination of consistency of castables 2012-11-14 ISO/FDIS 1927-5 * Monolithic (unshaped) refractory products Part 5: Preparation and treatment of test pieces 2012-11-14 ISO/FDIS 1927-6 * Monolithic (unshaped) refractory products Part 6: Measurement of physical properties 2012-11-14 ISO/FDIS 1927-7 * Monolithic (unshaped) refractory products Part 7: Tests on pre-formed shapes 2012-11-14 ISO/FDIS 1927-8 * Monolithic (unshaped) refractory products Part 8: Determination of complementary properties 2012-11-21 TC 35 Paints and varnishes ISO/FDIS 3233-1 * Paints and varnishes Determination of the percentage volume of non-volatile matter Part 1: Method by weighing a coated test panel in air and in a liquid of known density (general method) 2012-11-28 (Revision of ISO 3233:1998, ISO 3233:1998/Cor 1:1999) ISO/FDIS 20567-3 * Paints and varnishes Determination of stone-chip resistance of coatings Part 3: Single-impact test with a free-flying impact body 2012-11-28 TC 37 Terminology and other language and content resources ISO/FDIS 22274 * Systems to manage terminology, knowledge and content Concept-related aspects for developing and internationalizing classification systems 2012-11-19 TC 38 Textiles ISO/FDIS 105-E01 * Textiles Tests for colour fastness Part E01: Colour fastness to water 2012-12-14 (Revision of ISO 105-E01:2010) ISO/FDIS 105-E02 * Textiles Tests for colour fastness Part E02: Colour fastness to sea water 2012-11-14 (Revision of ISO 105-E02:1994, ISO 105-E02:1994/Cor 1:2002) ISO/FDIS 105-E04 * Textiles Tests for colour fastness Part E04: Colour fastness to perspiration 2012-12-14 (Revision of ISO 105-E04:2008) TC 41 Pulleys and belts (including veebelts) ISO/FDIS 340 * Conveyor belts Laboratory scale flammability characteristics Requirements and test method 2012-12-21 (Revision of ISO 340:2004) ISO/FDIS 14890 * Conveyor belts Specification for rubber- or plastics-covered conveyor belts of textile construction for general use 2012-12-21 (Revision of ISO 14890:2003, ISO 14890:2003/Cor 1:2006) ISO/FDIS 5294 * Synchronous belt drives Pulleys 2012-11-18 (Revision of ISO 5294:1989) TC 44 Welding and allied processes

ISO/FDIS 17636-1 * Non-destructive testing of welds Radiographic testing Part 1: X- and gamma-ray techniques with film 2012-11-14 (Revision of ISO 17636:2003) ISO/FDIS 17636-2 * Non-destructive testing of welds Radiographic testing Part 2: X- and gamma-ray techniques with digital detectors 2012-11-14 TC 51 Pallets for unit load method of materials handling ISO/FDIS 445 * Pallets for materials handling Vocabulary 2012-12-28 (Revision of ISO 445:2008) TC 58 ISO 22435:2007/FDAm d 1 Gas cylinders * Gas cylinders Cylinder valves with integrated pressure regulators Specification and type testing Amendment 1 2012-11-14 ISO/FDIS 19078 * Gas cylinders Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles 2012-11-29 (Revision of ISO 19078:2006) ISO/FDIS 21007-2 * Gas cylinders Identification and marking using radio frequency identification technology Part 2: Numbering schemes for radio frequency identification 2012-11-14 (Revision of ISO 21007-2:2005) TC 60 Gears IEC/FDIS 61400-4 * Wind turbines Part 4: Design requirements for wind turbine gearboxes 2012-11-08 (Revision of ISO 81400-4:2005, ISO 81400-4:2005/Cor 1:2005) TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ISO/FDIS 13705 * Petroleum, petrochemical and natural gas industries Fired heaters for general refinery service 2012-11-14 (Revision of ISO 13705:2006) ISO/FDIS 19901-7 * Petroleum and natural gas industries Specific requirements for offshore structures Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units 2012-11-28 (Revision of ISO 19901-7:2005) TC 85 Nuclear energy, nuclear technologies, and radiological protection ISO/FDIS 20785-1 * Dosimetry for exposures to cosmic radiation in civilian aircraft Part 1: Conceptual basis for measurements 2012-11-28 (Revision of ISO 20785-1:2006) ISO/FDIS 16424 * Nuclear energy Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements 2012-11-11 TC 86 Refrigeration and air-conditioning ISO/FDIS 817 * Refrigerants Designation and safety classification 2012-11-04 (Revision of ISO 817:2005) TC 92 Fire safety ISO/FDIS 19701 * Methods for sampling and analysis of fire effluents 2012-11-29 (Revision of ISO 19701:2005) ISO/FDIS 29903 * Guidance for comparison of toxic gas data between different physical fire models and scales 2012-11-22 TC 96 Cranes

ISO/FDIS 8686-1 * Cranes Design principles for loads and load combinations Part 1: General 2012-11-11 (Revision of ISO 8686-1:1989) TC 98 Bases for design of structures ISO/FDIS 3898 * Bases for design of structures Names and symbols of physical quantities Generic quantities 2012-11-15 (Revision of ISO 3898:1997) TC 106 Dentistry ISO/FDIS 20795-2 * Dentistry Base polymers Part 2: Orthodontic base polymers 2012-11-28 (Revision of ISO 20795-2:2010) TC 108 Mechanical vibration, shock and condition monitoring ISO/FDIS 10068 * Mechanical vibration and shock Mechanical impedance of the human hand-arm system at the driving point (Revision of ISO 10068:1998) TC 118 ISO/FDIS 11148-12 TC 123 Compressors and pneumatic tools, machines and equipment * Hand-held non-electric power tools Safety requirements Part 12: Circular, oscillating and reciprocating saws Plain bearings 2012-11-14 ISO/FDIS 3548-3 * Plain bearings Thin-walled half bearings with or without flange Part 3: Measurement of peripheral length 2012-11-22 TC 131 Fluid power systems ISO/FDIS 6162-1 * Hydraulic fluid power Flange connections with split or one-piece flange clamps and metric or inch screws Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 2012-11-10 (Revision of ISO 6162-1:2002, ISO 6162-1:2002/Cor 1:2004) ISO/FDIS 6162-2 * Hydraulic fluid power Flange connections with split or one-piece flange clamps and metric or inch screws Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 2012-11-10 (Revision of ISO 6162-2:2002) TC 135 Non-destructive testing ISO/FDIS 3059 * Non-destructive testing Penetrant testing and magnetic particle testing - Viewing conditions 2012-11-21 (Revision of ISO 3059:2001) TC 138 Plastics pipes, fittings and valves for the transport of fluids ISO/FDIS 15398 * Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas 2012-11-15 TC 146 Air quality ISO/FDIS 14382 * Workplace atmospheres Determination of toluene diisocyanate vapours using 1-(2- pyridyl)piperazine-coated glass fibre filters and analysis by high performance liquid chromatography with ultraviolet and fluorescence detectors 2012-11-14 TC 147 Water quality ISO/FDIS 5667-3 * Water quality Sampling Part 3: Preservation and handling of water samples 2012-11-07 (Revision of ISO 5667-3:2003) TC 150 Implants for surgery ISO/FDIS 5840-3 * Cardiovascular implants Cardiac valve prostheses Part 3: Heart valve substitutes implanted by 2012-11-21

transcatheter techniques TC 156 Corrosion of metals and alloys ISO/FDIS 7539-1 * Corrosion of metals and alloys Stress corrosion testing Part 1: General guidance on testing procedures 2012-11-28 (Revision of ISO 7539-1:1987) ISO/FDIS 13174 * Cathodic protection of harbour installations 2012-11-28 TC 163 Thermal performance and energy use in the built environment ISO/FDIS 13788 * Hygrothermal performance of building components and building elements Internal surface temperature to avoid critical surface humidity and interstitial condensation Calculation methods 2012-11-28 (Revision of ISO 13788:2001) TC 164 Mechanical testing of metals ISO/FDIS 9513 * Metallic materials Calibration of extensometer systems used in uniaxial testing 2012-11-14 (Revision of ISO 9513:1999, ISO 9513:1999/Cor 1:2000) TC 172 Optics and photonics ISO/FDIS 8598-1 * Optics and optical instruments Focimeters Part 1: General purpose instruments 2012-11-14 (Revision of ISO 8598:1996, ISO 8598:1996/Cor 1:1998) ISO/FDIS 10685-2 * Ophthalmic optics Spectacle frames and sunglasses electronic catalogue and identification Part 2: Commercial information ISO/FDIS 10685-3 * Ophthalmic optics Spectacle frames and sunglasses electronic catalogue and identification Part 3: Technical information 2012-11-07 2012-11-07 ISO/FDIS 11979-3 * Ophthalmic implants Intraocular lenses Part 3: Mechanical properties and test methods 2012-11-14 (Revision of ISO 11979-3:2006) TC 173 Assistive products for persons with disability ISO/FDIS 7176-3 * Wheelchairs Part 3: Determination of effectiveness of brakes 2012-11-28 (Revision of ISO 7176-3:2003) ISO/FDIS 7176-11 * Wheelchairs Part 11: Test dummies 2012-11-21 (Revision of ISO 7176-11:1992) ISO/FDIS 7176-16 * Wheelchairs Part 16: Resistance to ignition of upholstered parts Requirements and test methods 2012-11-21 (Revision of ISO 7176-16:1997) TC 185 Safety devices for protection against excessive pressure ISO/FDIS 4126-1 * Safety devices for protection against excessive pressure Part 1: Safety valves 2012-11-28 (Revision of ISO 4126-1:2004, ISO 4126-1:2004/Cor 1:2007) ISO/FDIS 4126-4 * Safety devices for protection against excessive pressure Part 4: Pilot operated safety valves 2012-11-28 (Revision of ISO 4126-4:2004, ISO 4126-4:2004/Cor 1:2007) ISO/FDIS 4126-5 * Safety devices for protection against excessive pressure Part 5: Controlled safety pressure relief systems (CSPRS) (Revision of ISO 4126-5:2004, ISO 4126-5:2004/Cor 1:2006, ISO 4126-5:2004/Cor 2:2007) 2012-11-28 TC 188 Small craft ISO/FDIS 10133.2 * Small craft Electrical systems Extra-low-voltage d.c. installations 2012-11-14 (Revision of ISO 10133:2000)

ISO/FDIS 12217-1 * Small craft Stability and buoyancy assessment and categorization Part 1: Non-sailing boats of hull length greater than or equal to 6 m (Revision of ISO 12217-1:2002) ISO/FDIS 12217-2 * Small craft Stability and buoyancy assessment and categorization Part 2: Sailing boats of hull length greater than or equal to 6 m (Revision of ISO 12217-2:2002) ISO/FDIS 12217-3 * Small craft Stability and buoyancy assessment and categorization Part 3: Boats of hull length less than 6 m (Revision of ISO 12217-3:2002) 2012-11-21 2012-11-21 2012-11-21 TC 193 Natural gas ISO/FDIS 10723 * Natural gas Performance evaluation for analytical systems 2012-11-07 (Revision of ISO 10723:1995, ISO 10723:1995/Cor 1:1998) TC 195 ISO 15645:2002/FDAm d 1 ISO 16039:2004/FDAm d 1 ISO 22242:2005/FDAm d 1 TC 197 Building construction machinery and equipment * Road construction and maintenance equipment Road milling machinery Terminology and commercial specifications Amendment 1 * Road construction and maintenance equipment Slipform pavers Definitions and commercial specifications Amendment 1 * Road construction and road maintenance machinery and equipment Basic types Identification and description Amendment 1 Hydrogen technologies ISO/FDIS 14687-2 * Hydrogen fuel Product specification Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles (Revision of ISO/TS 14687-2:2008) 2012-11-15 TC 205 Building environment design ISO/FDIS 11855-6 * Building environment design Design, dimensioning, installation and control of embedded radiant heating and cooling systems Part 6: Control 2012-11-11 TC 206 Fine ceramics ISO/FDIS 14604 * Fine ceramics (advanced ceramics, advanced technical ceramics) Methods of test for ceramic coatings Determination of fracture strain 2012-11-13 TC 211 Geographic information/geomatics ISO/FDIS 19117 * Geographic information Portrayal 2012-11-11 (Revision of ISO 19117:2005) TC 212 Clinical laboratory testing and in vitro diagnostic test systems ISO/FDIS 16256 * Clinical laboratory testing and in vitro diagnostic test systems Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases 2012-11-14 TC 223 Societal security ISO/FDIS 22313 * Societal security Business continuity management systems Guidance 2012-11-29 TC 244 Industrial furnaces and associated processing equipment ISO/FDIS 13579-1 * Industrial furnaces and associated processing equipment Method of measuring energy balance and calculating efficiency Part 1: General methodology ISO/FDIS 13579-2 * Industrial furnaces and associated processing equipment Method of measuring energy balance and calculating efficiency Part 2: Reheating furnaces for steel ISO/FDIS 13579-3 * Industrial furnaces and associated processing equipment Method of measuring energy balance

and calculating efficiency Part 3: Batch-type aluminium melting furnaces ISO/FDIS 13579-4 * Industrial furnaces and associated processing equipment Method of measuring energy balance and calculating efficiency Part 4: Furnaces with protective or reactive atmosphere JTC 1 ISO/IEC FDIS 25437 ISO/IEC 10373-6:2011/FDAmd 4 Information technology * Information technology Telecommunications and information exchange between systems WS- Session Web services for application session services (Revision of ISO/IEC 25437:2009) Identification cards Test methods Part 6: Proximity cards Amendment 4: Bit rates of fc/8, fc/4 and fc/2 and frame size from 512 to 4096 bytes 2012-11-05 2012-11-29 ISO/IEC FDIS 27014 Information technology Security techniques Governance of information security 2012-11-29 ISO/IEC FDIS 21118 ISO/IEC FDIS 29173-1 Information technology Office equipment Information to be included in specification sheets Data projectors (Revision of ISO/IEC 21118:2005) * Information technology Mobile item identification and management Part 1: Mobile RFID interrogator device protocol for ISO/IEC 18000-63 Type C 2012-11-29 2012-11-06