SURFACE
SURFACE Spec Guide up to 105 lm/w performance Performance based on 4 luminaire at 4000K @ 25 o C Calculated L80 at 80,000 hours Lumens per foot are delivered lumens Page 2 of 10 260.599.3590 orders@luxilluminaire.com www.luxilluminaire.com
SURFACE Spec Guide Lux Illuminaire pairs long life name brand LED chips and boards to ensure the highest of quality while providing even and smooth illumination throughout our luminaries. Our luminaires are available in 3000K, 3500K and 4000K color temperature with a minimum 80CRI with 90CRI available upon request. Lux Illuminaire utilizes name brand mid-powered LED s on their boards. Boards are projected to maintain 80% (L80) of their initial output for +80,000 hours. All of our luminaires come standard with 1% dimming and THD <20% utilizing 0-10v constant current protocol. 120v/277v is standard with the option of 347v. LDE1 - EcoSystem H-Series (1%) LDE5 - EcoSystem 5-Series (5%) Dexal Optronic (1% dimming - 0-10v) SOLOdrive (0.1% dim-to-dark) Lux Illuminaire housings are constructed of (6063T5) extruded aluminum. Our internal joiner system is designed to the highest of standards to ensure our precision cut housings aline and fit tightly without light leak. Our precision fitting end caps are constructed out of die cast aluminum and our steel reflectors are painted white. Our EOS 3.0 Surface Direct luminaire series are available in 2', 3', 4', 5', 6, 7 and 8' individual lengths or continuous row configurations. Continuous row configurations are joined together onsite utilizing the joiner kits provided. Lux Illuminaire utilizes an integral factory installed IOTA CP-12 emergency battery pack. Emergency circuit and Night Light options are available. : 9C : 15C : SC (j-box by others): HC All luminaires are UL Listed for both US and Canada. Product is fully designed and manufactured in the United States. Polyester powder, low gloss textured paint finish applied after a multi-stage pre-treatment. Canopies are finished in standard white. Standard luminaire finishes include white, silver, and black. Lux Illuminaire will warrant defective LEDs, boards, and Drivers for 5 years from date of purchase. Warranty is valid if luminaire is Installed and used according to specifications. If defective, Lux Illuminaire will send replacement boards or drivers at no cost along with replacement instructions and information on how to return defective components. Snap in extruded frosted acrylic lens. The approximate weight of a four foot luminaire is 16.8 lbs Including end caps assembled. Lux Illuminaire s fully integrated 90 degree corners are mitered with precision and performance. Custom angles available, please contact factory for more information. Page 3 of 10 260.599.3590 orders@luxilluminaire.com www.luxilluminaire.com
SURFACE Spec guide SHIP Consult factory for larger projects * 10-day lead times do not include weekends or holidays. * If a submittal is required, all signatures must be received before quick ship clock starts. * A clean order must be received 12:00pm EST, all orders received after 12:00pm EST will be entered the following day. * Change orders of any kind will require a new ESD. * All Quick-ship items must be on a separate PO. Page 4 of 10 260.599.3590 orders@luxilluminaire.com www.luxilluminaire.com
SURFACE Spec Guide Please use the following guide for fixture ordering. If your project will require a submittal, our in-house Applications Engineer will work closely with you on your project. 96 48 96 96 96 96 96 * Actual length shown Page 5 of 10 260.599.3590 orders@luxilluminaire.com www.luxilluminaire.com
SURFACE Spec Guide AxBxC = Length of each segment in Pattern separated by an x @ = Pattern Code (See reference examples) H = Pattern Orientation 23 23 Page 7 of 10 260.599.3590 orders@luxilluminaire.com www.luxilluminaire.com
SURFACE Spec Guide Lutron Vive provides a simple wireless lighting control solution for new and existing commercial buildings. Utilizing the Clear Connect wireless technology, the Lutron Vive controls operate in an uncongested radio frequency resulting in ultra-reliable communication and smooth dimming performance with no flicker or delay. The Enlighted two-wire fixture mount sensor features digital PIR occupancy, ambient light sensing, daylight harvesting, and environment monitoring. Simple to mount within a fixture, the sensor operates seamlessly to create a comfortable space and communicates wirelessly with the Enlighted control network. Osram s Connected Lighting Module (CLM) is a fixture-integrated component in a Light Management System (LMS). It enables luminaires to be connected to the LMS that are based on ZigBee communication protocols. Individually addressable, the CLM enables each luminaire to be independently controlled and configured to best meet the needs of the facility. Legrand Wattstopper's daylight sensor is a low voltage controller that works with standard 0-10v electric dimming ballasts to control electric lighting in response to daylight. This sensor can provide automatic dimming based on ambient light levels. The occupancy sensor turns lights on and off based on the occupancy and ambient light levels. Page 8 of 10 260.599.3590 orders@luxilluminaire.com www.luxilluminaire.com
SURFACE Spec Guide Page 9 of 10 260.599.3590 orders@luxilluminaire.com www.luxilluminaire.com
260.599.3590 orders@luxilluminaire.com www.luxilluminaire.com