IEC vs Myanmar vs Electrical and Electronic ဦ အ က ဒ တ ယ ည န က ရ မ လ ပ စစ စစ ဆ ရ ဌ န မန တ လ တ င ဒသက စက မ က က ပ ရ န င စစ ဆ ရ ဦ စ ဌ န စက မ ဝန က ဌ န 1

Similar documents
ASEAN Standards and Quality Bulletin Volume 1, July Address. Front Cover. Foreword. Consultation on Standards in ASEAN. Managing for Quality

CEN and CENELEC Organisational description & functions International and regional activities

Technical Barriers to Trade

AUGUST 2016 CONTENTS:

Technical Barriers to Trade

BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY

The ATEX Directive 94/9/EC

ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES

ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES

WORLD TRADE ORGANIZATION

The European Standardization System. Diana Dus Programme Manager International Cooperation

ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES

BRÜEL & KJÆR REGULATORY REQUIREMENTS AND MARKINGS

BUSINESS PLAN CEN/TC 79 RESPIRATORY PROTECTIVE DEVICES EXECUTIVE SUMMARY

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS EXECUTIVE SUMMARY

INDONESIA REGULATORY BODY. as of 3 November 2017 I. COUNTRIES WITH MANDATORY STANDARDS FOR GOVERNMENT PROCUREMENT ONLY RATIONALE FOR REGULATION

The Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles

ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES

Technical Barriers to Trade

This is a preview - click here to buy the full publication. IEC Quality Assessment System for Electronic Components (IECQ System)

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

BUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY

1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres?

Polish Centre for Accreditation

ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES

ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES

In accordance with the Radio Waves Act Chapter 58 Article 8(3), the document below is a

CEN strategies and plans for a global acceptance of the Eurocodes

BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY

ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY

ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES

COMMISSION DELEGATED REGULATION (EU) /... of

DGE 2 EUROPEAN UNION. Brussels, 20 September 2017 (OR. en) 2016/0287 (COD) PE-CONS 28/17 TELECOM 158 FC 54 CODEC 1008

Standardization, conformity attestation and accreditation in the Republic of Belarus. Valery N. Koreshkov, Chairman of Gosstandart

DOSH-SIRIM PPE APPROVAL CERTIFICATION & TESTING. Presenter; Azmi Musa SIRIM QAS INTERNATIONAL SDN. BHD.

AS/NZS :2012. Regulatory compliance mark for electrical and electronic equipment AS/NZS :2012. Part 1: Use of the mark

Economic and Social Council

National Spatial Development Framework and Urban Planning System of Myanmar

The New EU-Regulation on Construction Products

Confused by standards Standards for social alarms

EMC Regulatory Requirements: What you need to know for the EU, EAEU & Australia. Dr Alex Martin

On Electromagnetic Compatibility

BUSINESS PLAN CEN/TC 208 ELASTOMERIC SEALS FOR JOINTS IN PIPEWORK AND PIPELINES EXECUTIVE SUMMARY

AS/NZS 3820:2009 (Incorporating Amendment 1) Essential safety requirements for electrical equipment

This second part of the lesson & is dedicated to EMC legal aspect and standards.

New Legal Framework Carlo Casati

Test Report. Appliance EMF Testing

HazLoc Essential Guides:

UPDATE SESSION : TESTING SERVICES. Presented By: Puan Hjh Nur Fadhilah Muhammad Senior General Manager Testing Services Department

COMMISSION DELEGATED REGULATION (EU) /... of XXX

(1135/2016) Translation from Finnish Legally binding only in Finnish and Swedish Ministry of Economic Affairs and Employment, Finland

Proposal for a REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

Introduction of the Session 3

ENABLING MARKET ACCESS RADIO EQUIPMENT DIRECTIVE (RED) 2014/53/EU. The new radio equipment directive in detail

Implementation Guidance for ISO 9001:2008

ASEAN SECTORAL MRA ON ELECTRICAL AND ELECTRONIC EQUIPMENT (ASEAN EE MRA) LISTING OF THE DESIGNATED CONFORMITY ASSESSMENT BODIES

Commentary from a Certification Body. Mike Violette Director American Certification Body

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Japan s Activities on

SINGAPORE I. RATIONALE FOR REGULATION. COUNTRY RATIONALE FOR REGULATION Singapore Consumer Protection II. REGULATION BODY

ASIAN NETWORK WORKSHOP 2014

BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY

The Basel Convention in Thailand

Council Directive 93/68/EEC of 22 July 1993 amending Directives

LIST OF MOST COMMON ACRONYMS AND ABBREVIATIONS USED IN EA

Integration of IEC Standards and Conformity Assessment into LED Lighting Market In Korea DEONNA (KEUM) LEE

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

CE Marking and Technical Standardisation

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Type 5 Certifications:

AS/NZS :2009

Erik Leider Project Engineer Hazardous Locations, Gas & Oil Underwriters Laboratories

SINGAPORE I. RATIONALE FOR REGULATION. COUNTRY RATIONALE FOR REGULATION Singapore Consumer Protection II. REGULATION BODY

The Machinery Directive 2006/42/EC

cooperation in standardization Gonçalo Ascensão Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012

ANNEX. to the. Proposal for a Council Decision. on the conclusion of the Free Trade Agreement between the European Union and the Republic of Singapore

EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR HEALTH AND FOOD SAFETY

CEN standardization work on refrigerating systems, especially standard EN 378

BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS EXECUTIVE SUMMARY

Acronyms and Abbreviations

Environmental Impact Assessment System and Its Improvement in Myanmar

COMMISSION DELEGATED REGULATION (EU) /... of

BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY

Record of Amendments. Version Date Amendment Section/page affected

Record of Amendments. Version Date Amendment Section/page affected

31 March 2015 LW JELE (TECHNICAL SPECIALIST) NRCS Regulatory research and development

CE Compliance. Silva Management. September 18th, 2014 David Norris. C Eng. FI Mech E.

Household and similar electrical appliances Safety

Guidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU

Updates of Activities Conducted by BCRC China

BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES EXECUTIVE SUMMARY

Circuit Breakers JANUARY The electronic pdf version of this document found through is the officially binding version

This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation

Compilation of regulatory approaches used in various countries. Information received by the Secretariat through a survey in 2009

Product concerns. Product concerns Dag Björklöf. Methodology used in the EU to ensure compliance with essential requirements

EUROPEAN UNION. Brussels, 13 February 2014 (OR. en) 2011/0357 (COD) PE-CONS 54/13 ENT 190 MI 550 CONSOM 128 COMPET 470 CODEC 1481

Transcription:

IEC vs Myanmar vs Electrical and Electronic Equipment Standards ဦ အ က ဒ တ ယ ည န က ရ မ လ ပ စစ စစ ဆ ရ ဌ န မန တ လ တ င ဒသက စက မ က က ပ ရ န င စစ ဆ ရ ဦ စ ဌ န စက မ ဝန က ဌ န 1

VS. JSCEEE VS. Electrical Inspection Department 2

VS. JSCEEE VS. Electrical Inspection Department 3

Association of South East Asian Nations ASEAN on August 8th 1967 Bangkok Declaration Indonesia Brunei 7 1 1984 Malaysia Vietnam 28 7 1995 The Philippinesi Singapore gp Thailand Laos & Myanmar 23 7 1997 Cambodia 30 4 1999 4

ASEAN ECONOMIC COMMUNITY single market & single production base free flows of goods / services / investment/ skilled lb labors / free flow of capital 5

ASEAN EE MRA AHEEERR 6

ASEAN Consultative Committee for Standards and Quality 7

ATFWP(ASEAN Trade FacilitationWork Program) 12 WGs/PWGs WG 1 WG 2 WG 3 on on on Standards Legal Accreditation and Metrolog and Mutual y Conformity Recognition Arrangement Assessment Joint Sectoral Committee (JSC) for ASEAN EEE Agreement ASEAN Cosmetic Committee (ACC) Product Working Group on Pharmaceutical Product Working Group on Prepared Foodstuff Product Working Group on Automotive Product Working Group on Rubber based Products Product Working Group on Wood based Products Product Working Group on Medical Device and Equipment Product Working Group on Traditional Medicines & Health lh Supplement 8

Harmonization oftechnical Barriers totrade (Standards) ASEAN Policy Guideline on Standards and Conformance (ISO/IEC Guide 21 & Annex 3 of the WTO/TBT Agreement) ASEAN Good Regulatory Practice Guide Sectors Electrical and electronics Electrical l appliances Electrical safety EMC Standards Corresponding standards ISO and IEC Outcome of harmonization 139 harmonized standards (119 EEE Harmonized dsd) Stds) Rubber based products ISO 3 harmonised standards Pharmaceuticals International Conference on Harmonisation Requirements (ICH) ASEAN Common Technical Dossiers (ACTD) ASEAN Common Technical Requirements (ACTR) 9

Harmonization of (Technical regulations & MRA) Technical Regulations Electrical & Electronics ASEAN Harmonised Electrical and Electronic Equipment Regulatory Regimesigned on 9 December 2005 Cosmetics ASEAN Harmonised Cosmetic Regulatory Scheme signed on 2 September 2003. Mutual Recognition Arrangements Electrical & Electronics ASEAN Electrical and Electronic Mutual Recognition Arrangement (ASEAN EE MRA) signed 5 April 2002 Cosmetics Pharmaceuticals ASEAN Mutual Recognition Arrangement of Product Registration Approvals for Cosmetics signed on 2 September 2003 Sectoral MRA on Good Manufacturing Practice 10

Harmonisation of technical barriers to trade ASEAN Policy Guideline on Standards and Conformance -ISO/IEC Guide 21 -Annex 3 of the WTO/TBT Agreement Standards Technical Regulations Conformity Assessment Procedures Electrical & electronics Technical Regulations AHEEERR signed on 9 December 2005 ASEAN Good Regulatory Practice Guide Sectors EE - E Appliances - Electrical safety - EMC Standards Corresponding standards ISO & IEC Outcome of harmonization 119 harmonised standards Mutual Recognition Arrangements Electrical l & electronics ASEAN EE MRA signed on 5 April 2002 11

Post-market t surveillance system ASEAN Cosmetics Directives to be implemented by AMCs by 1 January 2008 A move from the traditional and preferred approach of pre-market approval to thenewapproach of post-market tsurveillance. Post marketing alert system for defective or unsafe medical device ASEAN Conformity Mark A regional third- party mark of conformity to indicate that a product is in conformity with the particular ASEAN Harmonized Technical Regulations/ Requirements specified under the relevant ASEAN Agreements 12

ASEAN Framework Agreement on Mutual lrecognitionarrangements t..signed on 16 December 1998..general principles for developing sectoral MRAs..an important means of eliminating TBT..enhancing intra ASEAN market access Three sectoral MRAS have been developed Electrical and electronics Cosmetics Telecommunications 13

ACCSQ S DECISIONS ON MRAs 25 th Meeting of ACCSQ, 9 10 March 2005, Vientiane..agreed on basis of developments of ASEAN MRAs..designed to facilitate intra ASEAN trade for the realisation of AFTA..products subject to mutual recognition in ASEAN MRAs are manufactured in ASEAN by an AMC...for products manufactured by a country outside ASEAN, the recognition of the test reports and certificate would be subjected to agreement by AMCs concerned and that particular country outside ASEAN. 14

ACCSQ Partners JAPAN EU CER US KOREA CHINA ASEAN Standards and Conformance Cooperation Program ASEAN Japan Standards and Conformance E Center The EU ASEAN Economic Cooperation Programme on Standards, Quality and Conformity Assessment Trans Regional EU ASEAN Trade Initiative (TREATI) ASEAN Programme for Regional Integration Support (APRIS) MOU on Standards and Conformance ASEAN Australia Development Cooperation Programme (AADCP) New Zealand Metrology Cooperation MOU on Trade related Standards and Conformance Issues ASEAN US Enhanced Partnership (AEP) Framework Agreement on Comprehensive Economic Cooperation Among ASEAN and Korea ASEAN China Proposal on Contact Point and Priority Cooperation Areas on Standardization 15

ASEAN EE MRA ASEAN Electrical and Electronic Mutual Recognition Arrangement..signed on 5 April 2002@ Bangkok.. all AMCs have notified participation in Recognition of test reports 16

ASEAN HARMONIZED ELECTRICAL AND ELECTRONIC EQUIPMENT REGULATORY REGIME AHEEER..signed on 9 December 2005.. eliminate restrictions to trade of EEE in ASEAN.. leading to a single regulatory regime..facilitate the negotiations for MRAs on Conformity Assessment between ASEAN and other countries or group of countries/blocs 17

JSC EE MRA Taskforce on Harmonization of EEE Regulatory Regime March 2004 May 2004, 3rd JSC Meeting; 1st Meeting; Taskforce was formed Principle of Harmonization September 2004, November 2004, January 2005, 2nd Meeting; 3rd Meeting; 4th Meeting; 1 st Draft Agreement 2 nd Draft Agreement 3 rd Draft Agreement March 2005, May 2005, 5th Meeting; 6th Meeting; 4 th Draft Agreement 5 th Draft Agreement July2005, August 2005, 7th Meeting; 26th ACCSQ Meeting; 6 th Draft Agreement Revised 6 th Draft Agreement October2005, 1st Special Meeting; November 2005, 2nd Special Meeting; Final Draft Agreement December 2005, AEM Meeting; Agreement was signed January 2011, Agreement fully implemented! 18

Objectives : Together acceptance ASEAN EE MRA Relevants Product; > Test Reports > Certification (Mandatory standard, Regulated Products) Test Report from Testing Lab Certification from Certification Body Listed under ASEAN EE MRA Testing Body >> ISO/IEC 17025 Certification Body >> ISO/IEC Guide 65 JSC EE MRA Advise for Implementation 19

List of CAB & Listed LAB by ASEAN EE MRA AMS Country Acceptance Condition Listed Testing Lab Listed CB TL Brunei Test Report & Cert. Cambodia Test Report & Cert. Indonesia Test Report & Cert. 6 5 Lao Test Report & Cert. Malaysia Test Report 1 1 Myanmar Test Report & Cert. Philipine Test Report 2 Singapore TestReport & Cert. 4 1 Thailand Test Report 6 1 Vietnam Test Report & Cert. 2 1 TOTAL 21 9 Source:Update data from(24 th JSCEEE Meeting) 20

Importers, Manufacturers EE MRA Principle align to IEC Standards Essential Requirements Designated Testing Labs Designated Certification Bodies Registration One Mark Market To be listed by JSC EE MRA Registration by individual country ASEAN Conformity Mark 21

Elements of the ASEAN Harmonized EEE Agreement Essential Requirements for EEEs Conformity Assessment Procedures & Registration of EEEs Safety Registration of EEEs Designation of CABs Environment Electromagnetic Compatibility (EMC) & Designation of CABs 22

Testing Lab. Certification Bodies AHEEERRapply for Mechanism Designating Body designate Designation CoD Listed Testing Lab. Listed Certification Bodies listing JSC EEE certify Importers apply or Certification Registration Producers for apply for CoC register Market Regulatory Authority market surveillance 23

Certification System Low Risk EEEs System 1(Type 1 a) [ Type Testing] High Risk EEEs System 5(Type 5) [ Type Testing + Quality System Assessment + Surveillance ] 2 Specificed Category 24

Relationship between JSCEEE & Electrical Inspection Department + 25

Inspection Sector by Electricity law & Regulation Ministry of Industry (MOI) Act (44/2014)by Pyidaungsu Hluttaw Electrical The Electricity Law Inspection Department (27 Oct 2014) Standardization for Technical Specification Inspection Fields Safety for Supplier and Consumer It has to be redrawn so as to enhance amendments concerning the Electricity Law(2014) with relevant (1985) ministries. The Electrical Regulati Understand and Follow existing laws & Regulations Specification & Safety 26

Testing Facilities for the Regulated EEE Currently, Electrical Inspection Department has to take responsible for the Regulatory Authority for EEE sectors. Being a Third Party, Electrical Inspection Department has its own Electrical Testing Laboratory,however, it has not been accredited in accordance with ASEAN EEE MRA,yet. Testing and Inspection of our department are well-performed in accordance with harmonized standards, d B.S standards, d JIS standards 27

Electrical Testing Laboratory Necessary to support Technical Assistance for Human Capital, Enhance to modernized Testing and Training Apparatus for Existing i Electrical l Testing laboratory to be Listed Laboratory in ASEAN Training Apparatus Testing Materials and Equipments Lab Engineers and Laboratorian Emerge Skilled Electrical Technicians/ workers 28

Current Situation: Myanmar on the Development of EEE Regulations Sr.No Matter arising to the Development of EEE regulations in DRI EI Myanmar 1 Legislation Standardization Law Electricity Law 2 National Level responsibility and coordination for DRI (Focal Point of Electrical Inspection Harmonization of Standards for the EEE Sector ACCSQ) Department (Focal Point of JSCEEE) 3 Development of Standard for EEE sector in Standardization National Standard Technical Working Council Committee(Electrical) 4 Technical Regulation for EEE Sector regard to its regulation Plan to add necessary paragraph in the amendment of regulation 5 Testing Facilities for the Regulated EEE Need to update its existing Electrical Testing Laboratory 6 Identification of Conformity Assessment System for EEE (national level responsibility) Some activities by Standardization Law 7 Accreditation Body (according to Standardization Law) 8 Certification Body (according to Standardization Law) 9 Regulated EEE and Mandatory Requirements/Standards (according to Standardization Law) 29

Legislation The Electricity Law(2014) The Law on Standardization (2014) According to the duties of Inspector General: Inspector General can issue or withdrawal- According to Chapter(VI) Application for and issue of certification Certificate of Electrical Safety Product certificate of certification Certificate of Conformity Production process certificate of certification Electricity skilled Certificate Service certificate of certification 30

Relationship with ASEAN All the matters for Electrical appliances are supervised by Joint Sectoral Committee Electrical and Electronic Equipment (JSCEEE). The Electrical Inspection Department is the Focal Point for Myanmar in order to take responsibility for the harmonization Electrical and Electronic Equipment in ASEAN. 31

Relationship with ASEAN Being a focal point, our department has to focus on Importance of harmonization for standards of Electrical and Electronic Equipment, especially those related to quality,sustainable energy and safety for environment. Our country agreed on the (ASEAN Sectoral Mutual Recognition Arrangement for Electrical and Electronic ASEAN EE MRA)(5 April 2002) and (ASEAN Harmonized Electrical and Electronic Equipment Regulatory Regime AHEEERR) (9 December 2005) 32

Technical Sub-Committee of Standardization in EEE Sector Director(Electrical (l l Inspection Department) takes the role of Chairman in Technical Sub Committee of Standardization in Electrical and Electronic Equipment and perform the implementation of Mandatory Myanmar Standard (MMS)adoption from International Harmonized IEC Standards. At present, 20 International Harmonized IECStandards are in On going Stage. Lists of Standards by Technical sub committee for EEE Sector Lists of IEC IEC 60335 1 IEC 60335 2 3 IEC 60335 2 41 IEC 60335 2 43 IEC 60335 2 44 IEC 60335 2 80 IEC 60335 2 26 IEC 60335 2 15 IEC 60335 2 23 IEC 60335 2 40 IEC 60227 5 IEC 60669 1 IEC 60884 1 IEC 60898 1 IEC 60898 2 33

34