INSTALLATION INSTRUCTIONS N99V /99 PRM Polarity Reversing Module What is the PRM? The PRM Polarity Reversing Module is used to reverse the polarity of the positive and negative voltages powering smoke detectors. The module is intended to be used with -wire smoke detectors that employ a sounder and voltage reversing feature. If more than one smoke detector is attached to a particular system, and one smoke detector detects smoke, the Module will reverse the polarity and all the detectors will sound the alarm. The module is triggered by a pulsing bell output. Compatible Smoke Detectors The PRM may be used with the System Sensor /AT and similar models with the required operating features previously stated. Where to Mount the PRM Mount the PRM inside the control panel s cabinet or in a separate cabinet using the double-sided tape provided. How to Wire the PRM Wire the PRM as shown in the diagrams on the following pages. These diagrams are examples of possible installations. The following note applies to all the control panels shown. The PRM reverses polarity to smoke detectors with Integral Temp- Sounders. Typically, in alarm, each draws 9-0 ma of current. Some control panels only supply enough current for one smoke detector. In order to attach more than one, an external power supply and an external relay may be required. See the panel s Installation Guide for further instructions on -wire smoke detectors and current output capacity. How to Use the If interrupting the (-) leg of power to the smoke detector, set jumper P to the A position. If interrupting the () leg of power to the smoke detector, set the jumper P to the B position. See the following diagrams for specific settings. Specifications Current: Standby: ma Alarm: 0mA Relay: A @ VDC (Use only A-B or ADEMCO 0CF) Reset Switch: At least A @ VDC Terminal Connections Number Connection Number Connection To VDC To Smoke Det. To VDC - To Smoke Det. - Input To Panel Reset To Panel -
PRM Installation Instructions PRM P -WIRE A-B k JUMPER P ON MODULE TO SELECTED FIRE ZONE ADEMCO: VISTA-0SE First Alert: FAC FOUR-WIRE CIRCUIT PRM JUMPER P ON MODULE P -WIRE A-B k C RELAY SHOWN ENERGIZED (Use only system sensor model A-B or ADEMCO 0CF) NO USE A VDC, UL LISTED TO SELECTED FIRE ZONE FOUR-WIRE CIRCUIT ADEMCO: VISTA-0SE Using Auxiliary Power Supply First Alert: FAC Using Auxiliary Power Supply
PRM Installation Instructions NC MOMENTARY RESET SWITCH PRM JUMPER P ON MODULE P -WIRE A-B k FOUR-WIRE CIRCUIT ADEMCO: VISTA-0, VISTA-0P, VISTA-B First Alert: FA0CV and FA0C* PRM JUMPER P ON MODULE P -WIRE A-B k FOUR-WIRE CIRCUIT NO NC C 0 ADEMCO: VISTA-0, VISTA-0P, VISTA-B If Using 0 Relay Module First Alert: FA0CV and FA0C If Using 0 Relay Module* * For all above controls, -wire smoke detectors may only be used on Zone.
PRM Installation Instructions PRM 0 MODULE or N.C. MOMENTARY SWITCH 0 JUMPER P ON MODULE P -WIRE A-B k FOUR-WIRE CIRCUIT USE A VDC, UL LISTED ADEMCO: VISTA-0, VISTA-0P, VISTA-B Using Auxiliary Power Supply First Alert: FA0CV and FA0C Using Auxiliary Power Supply* * For all above controls, -wire smoke detectors may only be used on Zone.
PRM Installation Instructions 0 9 PRM P -WIRE A-B k JUMPER P ON MODULE ADEMCO: VISTA-FB, VISTA-00, VISTA-FB First Alert: FA00C/CA/CB FOUR-WIRE CIRCUIT 9 0 PRM JUMPER P ON MODULE P -WIRE A-B k FOUR-WIRE CIRCUIT USE A VDC, UL LISTED ADEMCO: VISTA-FB, VISTA-00, VISTA-FB Using Auxiliary Power Supply First Alert: FA00C/CA/CB Using Auxiliary Power Supply
PRM Installation Instructions PRM P -WIRE A - B.k JUMPER P ON MODULE FBII: XL-P FOUR-WIRE CIRCUIT JUMPER P ON MODULE C NO RELAY SHOWN ENERGIZED (Use only system sensor model A-B or ADEMCO 0CF) P PRM USE A VDC, UL LISTED -WIRE A - B.k FOUR-WIRE CIRCUIT FBII: XL-P Using Auxiliary Power Supply
PRM Installation Instructions P PRM -WIRE A - B.k JUMPER P ON MODULE FBII: XL-T FOUR-WIRE CIRCUIT JUMPER P ON MODULE PRM P -WIRE A - B.k C NO RELAY SHOWN ENERGIZED (Use only system sensor model A-B or ADEMCO 0CF) USE A VDC, UL LISTED FOUR-WIRE CIRCUIT FBII: XL-T Using Auxiliary Power Supply
PRM Installation Instructions PRM P -WIRE A - B.k JUMPER P ON MODULE FBII: XL-0 FOUR-WIRE CIRCUIT PRM JUMPER P ON MODULE C NO P -WIRE A - B.k RELAY SHOWN ENERGIZED (Use only system sensor model A-B or ADEMCO 0CF) USE A VDC, UL LISTED FOUR-WIRE CIRCUIT FBII: XL-0 Using Auxiliary Power Supply
PRM Installation Instructions PRM P -WIRE A - B.k JUMPER P ON MODULE FBII: XL- FOUR-WIRE CIRCUIT JUMPER P ON MODULE C NO PRM P -WIRE A - B.k RELAY SHOWN ENERGIZED (Use only system sensor model A-B or ADEMCO 0CF) USE A VDC, UL LISTED FOUR-WIRE CIRCUIT FBII: XL- Using Auxiliary Power Supply 9
PRM Installation Instructions 0 PRM P -WIRE A - B.k JUMPER P ON MODULE FOUR-WIRE CIRCUIT FBII: XL- 0 JUMPER P ON MODULE PRM P -WIRE A - B.k USE A VDC, UL LISTED FOUR-WIRE CIRCUIT FBII: XL- Using Auxiliary Power Supply Note: To utilize relay # on XL- as a reset connect, a jumper must be placed between terminals and 0 as shown. 0.
ADEMCO Limited Warranty Alarm Device Manufacturing Company, a Division of Pittway Corporation, and its divisions, subsidiaries and affiliates ("Seller"), Eileen Way, Syosset, New York 9, warrants its products to be in conformance with its own plans and specifications and to be free from defects in materials and workmanship under normal use and service for months from the date stamp control on the product or, for products not having an ADEMCO date stamp, for months from date of original purchase unless the installation instructions or catalog sets forth a shorter period, in which case the shorter period shall apply. Seller's obligation shall be limited to repairing or replacing, at its option, free of charge for materials or labor, any product which is proved not in compliance with Seller's specifications or proves defective in materials or workmanship under normal use and service. Seller shall have no obligation under this Limited Warranty or otherwise if the product is altered or improperly repaired or serviced by anyone other than ADEMCO factory service. For warranty service, return product transportation prepaid, to ADEMCO Factory Service, Eileen Way, Syosset, New York 9. THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO CASE SHALL SELLER BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, OR UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER'S OWN NEGLIGENCE OR FAULT. Seller does not represent that the products it sells may not be compromised or circumvented; that the products will prevent any personal injury or property loss by burglary, robbery, fire or otherwise; or that the products will in all cases provide adequate warning or protection. Customer understands that a properly installed and maintained alarm may only reduce the risk of a burglary, robbery, fire or other events occurring without providing an alarm, but it is not insurance or a guarantee that such will not occur or that there will be no personal injury or property loss as a result. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON A CLAIM THE PRODUCT FAILED TO GIVE WARNING. HOWEVER, IF SELLER IS HELD LIABLE, WHETHER DIRECTLY OR INDIRECTLY, FOR ANY LOSS OR DAMAGE ARISING UNDER THIS LIMITED WARRANTY OR OTHERWISE, REGARDLESS OF CAUSE OR ORIGIN, SELLER'S MAXIMUM LIABILITY SHALL NOT IN ANY CASE EXCEED THE PURCHASE PRICE OF THE PRODUCT, WHICH SHALL BE THE COMPLETE AND EXCLUSIVE REMEDY AGAINST SELLER. This warranty replaces any previous warranties and is the only warranty made by Seller on this product. No increase or alteration, written or verbal, of the obligations of this Limited Warranty is authorized. REFER TO INSTALLATION INSTRUCTIONS FOR THE WITH WHICH THIS DEVICE IS USED FOR LIMITATIONS OF THE ENTIRE ALARM SYSTEM.
N99V /99 Eileen Way, Syosset, N.Y. 9 9l Copyright 999 PITTWAY CORPORATION